Search NASA⌕ Search

SEARCH · Search NASA

Results for “land simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Retreat and Regrowth of the Greenland Ice Sheet During the Last Interglacial as Simulated by the CESM2‐CISM2 Coupled Climate–Ice Sheet Model

Abstract During the Last Interglacial, approximately 129 to 116 ka (thousand years ago), the Arctic summer climate was warmer than the present, and the Greenland Ice Sheet retreated to a smaller extent than its current state. Previous model‐derived and geological reconstruction estimates of the sea‐level contribution of the Greenland Ice Sheet during the Last Interglacial vary widely. Here, we conduct a transient climate simulation from 127 to 119 ka using the Community Earth System Model (CESM2), which includes a dynamic ice sheet component (the Community Ice Sheet Model, CISM2) that is interactively coupled to the atmosphere, land, ocean, and sea ice components. Vegetation distribution is updated every 500 years based on biomes simulated using a monthly climatology to force the BIOME4 equilibrium vegetation model. Results show a substantial retreat of the Greenland Ice Sheet, reaching a minimum extent at 121.9 ka, equivalent to a 3.0 m rise in sea level relative to the present day, followed by gradual regrowth. In contrast, a companion simulation employing static vegetation based on pre‐industrial conditions shows a much smaller ice‐sheet retreat, highlighting the importance of the changes in high‐latitude vegetation distribution for amplifying the ice‐sheet response.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

ELM2.1-XGBfire1.0: improving wildfire prediction by integrating a machine learning fire model in a land surface model

Wildfires have shown increasing trends in both frequency and severity across the contiguous United States (CONUS). However, process-based fire models have difficulties in accurately simulating the burned area over the CONUS due to a simplification of the physical process and cannot capture the interplay among fire, ignition, climate, and human activities. The deficiency of burned area simulation deteriorates the description of fire impact on energy balance, water budget, and carbon fluxes in the Earth system models (ESMs). Alternatively, fire models based on machine learning (ML), which capture statistical relationships between the burned area and environmental factors, have shown promising burned area predictions and corresponding fire impact simulation. We develop a hybrid framework (ELM2.1-XGBFire1.0) that integrates an eXtreme Gradient Boosting (XGBoost) wildfire model with the Energy Exascale Earth System Model (E3SM) land model (ELM) version 2.1. A Fortran–C–Python deep learning bridge is adapted to support online communication between ELM and the ML fire model. Specifically, the burned area predicted by the ML-based wildfire model is directly passed to ELM to adjust the carbon pool and vegetation dynamics after disturbance, which are then used as predictors in the ML-based fire model in the next time step. Evaluated against the historical burned area from Global Fire Emissions Database 5 from 2001–2019, the ELM2.1-XGBFire1.0 outperforms process-based fire models in terms of spatial distribution and seasonal variations. The ELM2.1-XGBFire1.0 has proven to be a new tool for studying vegetation–fire interactions and, more importantly, enables seamless exploration of climate–fire feedback, working as an active component of E3SM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Future Warming and Intensification of Precipitation Extremes: A “Double Whammy” Leading to Increasing Flood Risk in California

This study focuses on quantifying future anthropogenic changes in surface runoff associated with extreme precipitation in California's Sierra Nevada. The method involves driving a land surface model with output from a high resolution regional atmospheric simulation of the most extreme atmospheric rivers (ARs). AR events were selected from an ensemble of global climate model simulations of historical and late 21st century climate under the “high-emission” RCP8.5 scenario. Average precipitation during the future ARs increases by ~25% but a much lower proportion falls as snow. The resulting future runoff increase is dramatic—nearly 50%, reflecting both the precipitation increase and simultaneous conversion of snow to rain. The “double whammy” impact on runoff is largest in the 2,000–2,500 m elevation band, where the snowfall loss and precipitation increase are both especially large. Overall, this huge increase in runoff during the most extreme AR events could present major flood control challenges for the region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Optimizing Carbon Cycle Parameters Drastically Improves Terrestrial Biosphere Model Underestimates of Dryland Mean Net CO 2 Flux and its Inter-Annual Variability

Drylands occupy ~40% of the land surface and are thought to dominate global carbon (C) cycle inter-annual variability (IAV). Therefore, it is imperative that global terrestrial biosphere models (TBMs), which form the land component of IPCC earth system models, are able to accurately simulate dryland vegetation and biogeochemical processes. However, compared to more mesic ecosystems, TBMs have not been widely tested or optimized using in situ dryland CO 2 fluxes. Here, for this work, we address this gap using a Bayesian data assimilation system and 89 site-years of daily net ecosystem exchange (NEE) data from 12 southwest US Ameriflux sites to optimize the C cycle parameters of the ORCHIDEE TBM. The sites span high elevation forest ecosystems, which are a mean sink of C, and low elevation shrub and grass ecosystems that are either a mean C sink or “pivot” between an annual C sink and source. We find that using the default (prior) model parameters drastically underestimates both the mean annual NEE at the forested mean C sink sites and the NEE IAV across all sites. Our analysis demonstrated that optimizing phenology parameters are particularly useful in improving the model's ability to capture both the magnitude and sign of the NEE IAV. At the forest sites, optimizing C allocation, respiration, and biomass and soil C turnover parameters reduces the underestimate in simulated mean annual NEE. Our study demonstrates that all TBMs need to be calibrated for dryland ecosystems before they are used to determine dryland contributions to global C cycle variability and long-term carbon-climate feedbacks.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

The Shortwave Radiative Flux Response to an Injection of Sea Salt Aerosols in the Gulf of Mexico

We report marine cloud brightening (MCB) has been proposed as a potential means of geoengineering the climate, temporarily providing cooling to offset some of the effects of climate change. Marine sky brightening (MSB), involving the direct scattering of sunlight from sea salt injection into the marine boundary layer, has been proposed as an additional geoengineering method that could work in areas that are not regularly cloudy. Here, we use a regional atmospheric model to simulate MCB and MSB over the Gulf of Mexico and nearby land, a highly populated and economically important region that is not characterized by persistent marine stratocumulus cloud cover. Injection of sea salt in the Aitken mode from a region in the central Gulf of Mexico equivalent to 10.8 Tg yr -1 produces an upwards 8.4 W m -2 radiative flux change across the region at the top of the atmosphere, largely due to cloud property changes. Comparatively, a similar mass injection in the accumulation mode produces a 3.1 W m -2 radiative flux change driven primarily by direct scattering. Injection of even larger particles produces a much smaller radiative flux change. Shortwave flux changes due to clouds are largely driven by an increase in cloud droplet number concentration and an increase in cloud liquid water path (each contributing about 45% to the flux change), with a much lower contribution from cloud fraction changes (10%).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Reservoir Drought Resilience Under Future Warming Scenarios: Regional Disparities Across Heavily Regulated US Basins

Droughts across the U.S. have imposed substantial challenges to the management of water resources. Reservoir drought, one type of hydrological drought, is characterized by abnormally low reservoir storage levels, reflecting combined impacts of natural water shortages and water management practices. We investigate how reservoir drought signatures, particularly onset, severity, duration, recovery and frequency, may shift under rising temperatures, and how these shifts vary by reservoir typology and degree of regulation. By coupling atmosphere-land-river models with reservoir operations at ~12-km resolution, we simulated reservoir storage and characterized reservoir droughts across five heavily regulated U.S. basins. Our findings reveal significant regional and functional disparities in reservoir drought resilience under the scenario of rising temperatures. Reservoirs in the Texas-Gulf region are projected to become more resilient, while systems in the Upper Colorado and South Atlantic-Gulf regions face increased risk due to prolonged drought durations and slower recovery. With respect to primary function, reservoirs used for irrigation and hydropower, particularly those with smaller storage capacity and lower degrees of regulation, are most susceptible to future drought stress. These results are valuable in understanding water availability in highly regulated environments, and the influence of hydrometeorological conditions on storage dynamics. Overall, this study provides the first of its kind benchmark for reservoir droughts at a continental scale to support evolving multi-sectoral drought mitigation efforts. Future research is needed to link reservoir drought conditions to actual supply shortages across competing water uses, while leveraging existing adaptive management strategies and coordinated reservoir operations.

reservoir↗
DOE OSTI2023

The Role of Cloud–Cloud Interactions in the Life Cycle of Shallow Cumulus Clouds

Some of the climate research puzzles relate to a limited understanding of the critical factors governing the life cycle of cumulus clouds. These factors force the initiation and the various mixing processes during cloud life cycles. To shed some light into these processes, we tracked the life cycle of thousands of individual shallow cumulus clouds in a large-eddy simulation during the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems field campaign in the U.S. southern Great Plains. Concurrent evolution of clouds is tracked and their respective neighboring clouds are examined. Results show that the clouds initially smaller than neighboring clouds can grow larger than the neighboring clouds by a factor of 2 within 20% of their lifetime. Two groups of the tracked clouds with growing and decaying neighboring clouds, respectively, show distinct characteristics in their life cycles. Clouds with growing neighboring clouds form above regions with larger surface heterogeneity, whereas clouds with decaying neighboring clouds are associated with less heterogeneous surfaces. Also, those with decaying neighboring clouds experience larger instability and a more humid boundary layer, indicating evaporation below the cloud base is likely occurring before those clouds are formed. Larger instability leads to higher vertical velocity and convergence within the cloud, which causes stronger surrounding downdrafts and water vapor removal in the surrounding area. The latter appears to be the reason for the decaying neighboring clouds. Finally, understanding those processes provide insights into how cloud–cloud interactions modulate the evolution of cloud population and into how this evolution can be represented in future cumulus parameterizations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Landsat near-infrared (NIR) band and ELM-FATES sensitivity to forest disturbances and regrowth in the Central Amazon

Forest disturbance and regrowth are key processes in forest dynamics, but detailed information on these processes is difficult to obtain in remote forests such as the Amazon. We used chronosequences of Landsat satellite imagery (Landsat 5 Thematic Mapper and Landsat 7 Enhanced Thematic Mapper Plus) to determine the sensitivity of surface reflectance from all spectral bands to windthrow, clear-cut, and clear-cut and burned (cut + burn) and their successional pathways of forest regrowth in the Central Amazon. We also assessed whether the forest demography model Functionally Assembled Terrestrial Ecosystem Simulator (FATES) implemented in the Energy Exascale Earth System Model (E3SM) Land Model (ELM), ELM-FATES, accurately represents the changes for windthrow and clear-cut. The results show that all spectral bands from the Landsat satellites were sensitive to the disturbances but after 3 to 6 years only the near-infrared (NIR) band had significant changes associated with the successional pathways of forest regrowth for all the disturbances considered. In general, the NIR values decreased immediately after disturbance, increased to maximum values with the establishment of pioneers and early successional tree species, and then decreased slowly and almost linearly to pre-disturbance conditions with the dynamics of forest succession. Statistical methods predict that NIR values will return to pre-disturbance values in about 39, 36, and 56 years for windthrow, clear-cut, and cut + burn disturbances, respectively. The NIR band captured the observed, and different, successional pathways of forest regrowth after windthrow, clear-cut, and cut + burn. Consistent with inferences from the NIR observations, ELM-FATES predicted higher peaks of biomass and stem density after clear-cuts than after windthrows. ELM-FATES also predicted recovery of forest structure and canopy coverage back to pre-disturbance conditions in 38 years after windthrows and 41 years after clear-cut. The similarity of ELM-FATES predictions of regrowth patterns after windthrow and clear-cut to those of the NIR results suggests the NIR band can be used to benchmark forest regrowth in ecosystem models. Our results show the potential of Landsat imagery data for mapping forest regrowth from different types of disturbances, benchmarking, and the improvement of forest regrowth models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data for Grogan et al. "Bringing Hydrologic Realism to Water Markets"

This data set provides model output and post-processing files required to reproduce the results, tables, and figures in the paper "Bringing Hydrologic Realism to Water Markets" by Grogan et al. (in review). Other input data used in this study includes: Lisk, M., Grogan, D., Zuidema, S., Caccese, R., Peklak, D., Zheng, J., Fisher-Vanden, K., Lammers, R., Olmstead, S., & Fowler, L. (2023). Harmonized Database of Western U.S. Water Rights (HarDWR) (Version v1) [Data set]. MSD-LIVE Data Repository. https://doi.org/10.57931/2205619 Two models were used in this study: (1) The University of New Hampshire Water Balance Model WBM, and (2) a Water Market Model. Market model code and model output post-processing code that make use of these data can be found here Model output files are: 1. WBM output files: scenario[x]_wbm_output.zip Where [x] is one of 1, 2, 2a, 3, and 3a Each zipped directory contains 7 gridded NetCDF files, each reporting the 10-year annual average value of a given variable, in units of average mm/day: File Name: wbm_indUseGross_yc.nc; Description: Water withdrawals by industry (part of the urban sector) File Name: wbm_domUseGross_yc.nc; Description: Water withdrawals by the domestic sector (part of the urban sector) File Name: wbm_irrigationGross_yc.nc; Description: Water withdrawals for agriculture File Name: wbm_irrigationExtra_yc.nc; Description: Water withdrawals from unsustainable groundwater for agriculture File Name: wbm_indUseEvap_yc.nc; Description: Consumptive water use by industry File Name: wbm_domUseEvap_yc.nc; Description: Consumptive water use by the domestic sector File Name: wbm_irrigationNet_yc.nc; Description: Consumptive water use by agriculture The file full_cell_area.nc gives the area of each grid cell in km2, which is used for converting water depth to water volume. 2. Water market model output & post processing output Folder: marketTrdSummaries/ Description: Files in this folder are used as input to code 1_WelfareCalculation_actual_trades.R. They summarize historical water right trade transactions in each state. File Name: welfare_gain_by_state_sector.csv; Description: Welfare gains by state and sector, as shown in Figure 3F. Used in code Figure3.R and produced (as a .xlsx file) by code 2_DemandCurves_simulated_trades.R File Name: welfare_data_actual.rdata; Description: welfare gains by WMA from actual historical trades, as shown in Figure 3A. This data is the output of code 1_WelfareCalculation_actual_trades.R File Name: welfare_summary_simulated.xlsx; Description: Welfare gains by state as simulated by the market model in Scenario 1. Produced by code 2_DemandCurves_simulated_trades.R, and used in code 4_WelfareCalculation.R. File Name: welfare_summary_cutoffs.xlsx; Description: Welfare gains by state as simulated by the market model in Scenario 2. Produced by code 3_DemandCurves_simulated_trades_cutoffs.R, and used in code 4_WelfareCalculation.R. File Name: welfare_summary_cutoffs_SGMS.xlsx; Description: Welfare gains by state as simulated by the market model in Scenario 2a. Produced by code 3_DemandCurves_simulated_trades_cutoffs.R, and used in code 4_WelfareCalculation.R. File Name: welfare_data_actual.rdata; Description: Spatial data, actual historical welfare gains by WMA as shown in Figure 3A. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. File Name: welfare_data_simulated.rdata; Description: Spatial data, simulated Scenario 1 welfare gains by WMA as shown in Figure 3B. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. File Name: welfare_data_simulated_cutoffs.rdata; Description: Spatial data, simulated Scenario 2 welfare gains by WMA. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. File Name: welfare_data_simulated_cutoffs_SGMA.rdata; Description: Spatial data, simulated Scenario 2a welfare gains by WMA. Produced by code 4_WelfareCalculation.R and used by code Figure3.R. Additional files are provided for efficient reproduction of tables and figures. These include: File Name: wma_thresold_dates_Scenario2(a).csv; Description: Wet vs. paper right threshold dates for each WMA. Shown in Figure 2A,B. Produced and used by code calculate_thresolds_Figure2.R File Name: WWRTradeBounds (directory); Description: Trade boundary shapefile required to reproduce Figure 3A-D. Used in code Figure3.R File Name: welfare_region_totals.csv; Description: Welfare gains for the entire study region, as shown in Figure 3E. Used in code Figure3.R File Name: Welfare_gain_by_state_sector.csv; Description: Welfare gains by state and sector, as shown in Figure 3F. Used in code Figure3.R and produced (as a .xlsx file) by code 2_DemandCurves_simulated_trades.R File Name: WECC_MERIT_5min_v3b_mask.nc; Description: Gridded file that identified which land grid cells are in the WBM model domain, used for processing in code Figure4.py File Name: Table_1.csv; Description: All data in Table 1, reproducible from WBM output files using code table_1.R

Economics↗
DOE OSTI2020

Conserving Land–Atmosphere Synthesis Suite (CLASS)

Accurate estimates of terrestrial water and energy cycle components are needed to better understand climate processes and improve models’ ability to simulate future change. Various observational estimates are available for the individual budget terms; however, these typically show inconsistencies when combined in a budget. In this work, a Conserving Land–Atmosphere Synthesis Suite (CLASS) of estimates of simultaneously balanced surface water and energy budget components is developed. Individual CLASS variable datasets, where possible, 1) combine a range of existing variable product estimates, and hence overcome the limitations of estimates from a single source; 2) are observationally constrained with in situ measurements; 3) have uncertainty estimates that are consistent with their agreement with in situ observations; and 4) are consistent with each other by being able to solve the water and energy budgets simultaneously. First, available datasets of a budget variable are merged by implementing a weighting method that accounts both for the ability of datasets to match in situ measurements and the error covariance between datasets. Then, the budget terms are adjusted by applying an objective variational data assimilation technique (DAT) that enforces the simultaneous closure of the surface water and energy budgets linked through the equivalence of evapotranspiration and latent heat. Comparing component estimates before and after applying the DAT against in situ measurements of energy fluxes and streamflow showed that modified estimates agree better with in situ observations across various metrics, but also revealed some inconsistencies between water budget terms in June over the higher latitudes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Geothermal Power Systems Analysis: Outcome of Industry Stakeholders Workshop

Geothermal cost and performance evaluation implemented via techno-economic assessment (TEA) modeling is critical for the U.S. Department of Energy (DOE) and other geothermal industry stakeholders in assessing the current state of geothermal technologies and to identify existing hurdles to commercially viable geothermal development. The Geothermal Electricity Technology Evaluation Model (GETEM) is a major TEA tool used in estimating the economic feasibility and levelized cost of energy (LCOE) of conventional hydrothermal systems and enhanced geothermal systems (EGS). Since 2021, GETEM has been transitioning from an intricate spreadsheet model to a user-friendly tool within the System Advisor Model (SAM) developed by the National Renewable Energy Laboratory (NREL). Apart from enabling an expanded visibility of the geothermal model among other renewable resources, having GETEM in SAM has the advantage of simulation automation, better usability, updates tracking, active user inputs/feedback, and extended financial modeling. GETEM is used in developing supply curves for NREL's Annual Technology Baseline (ATB), which provides inputs to the Renewable Energy Potential (reV) and the Regional Energy Deployment System (ReEDS) models. The geothermal module in NREL's reV model assesses the geothermal energy potential in the conterminous United States by defining the geospatial intersection of geothermal resources with existing grid infrastructure within the constraint of land use characteristics. The ReEDS model is a capacity expansion model used for simulating the long-term build-out and operation of the U.S. generation and transmission system based on current energy costs and policies. To ensure enhanced representation of current industry trends in our model transitions and development, we organized a two-day virtual workshop to elicit geothermal industry stakeholder input and recommendations on our current approaches and assumptions on techno-economic, resource assessment, and deployment scenarios modeling of geothermal technologies. Participants included developers, operators, investors, regulatory agencies, system modelers, national laboratory researchers, consultants, and other stakeholders. In this workshop, we gained stakeholder insights on current geothermal plant performance (i.e., capacity factors), updated drilling costs and learning curves, and next-generation technologies such as closed-loop and superhot rock geothermal. Other outcomes from this workshop and its impact on future geothermal development feasibility, resource availability, and capacity expansion studies are compiled and discussed.

annual technology baseline↗
DOE OSTI2024

Geothermal Power Systems Analysis: Outcome of Industry Stakeholders Workshop: Preprint

Geothermal cost and performance evaluation implemented via technoeconomic assessment (TEA) modeling is critical for the Department of Energy (DOE) and other geothermal industry stakeholders in assessing the current state of geothermal technologies and to identify existing hurdles to commercially viable geothermal development. The Geothermal Electricity Technology Evaluation Model (GETEM) is a major TEA tool used in estimating the economic feasibility and levelized cost of energy (LCOE) of conventional hydrothermal systems and enhanced geothermal systems (EGS). Since 2021, GETEM has been transitioning from an intricate spreadsheet model to a user-friendly tool within the System Advisor Model (SAM) developed by the National Renewable Energy Laboratory (NREL). Apart from enabling an expanded visibility of the geothermal model among other renewable resources, having GETEM in SAM has the advantage of simulation automation, better usability, updates tracking, active user inputs/feedback, and extended financial modeling. GETEM is used in developing supply curves for the Annual Technology Baseline (ATB). The ATB data are inputs to the Renewable Energy Potential (reV) and the Regional Energy Deployment System (ReEDS) models. The geothermal module in NREL’s reV model assesses the geothermal energy potential in the conterminous United States by defining the geospatial intersection of geothermal resources with existing grid infrastructure within the constraint of land use characteristics. The ReEDS model is a capacity expansion model used for simulating the long-term build-out and operation of the US generation and transmission system based on current energy costs and policies. To ensure enhanced representation of current industry trends in our model transitions and development, we organized a two-day virtual workshop to elicit geothermal industry stakeholder input and recommendations on our current approaches and assumptions on technoeconomic, resource assessment, and deployment scenarios modeling of geothermal technologies. Participants included developers, operators, investors, regulatory agencies, system modelers, national laboratory researchers, consultants, and other stakeholders. In this workshop, we gained stakeholder insights on current geothermal plant performance (i.e., capacity factors), updated drilling costs and learning curves, and next generation technologies such as closed loop and superhot rock geothermal. Other outcomes from this workshop and its impact on future geothermal development feasibility, resource availability, and capacity expansion studies are compiled and discussed.

Annual Technology Baseline↗
DOE OSTI2024

Integration of plant and microbial oil processing at oilcane biorefineries for more sustainable biofuel production

Oilcane—an oil-accumulating crop engineered from sugarcane—and microbial oil have the potential to improve renewable oil production and help meet the expected demand for bioderived oleochemicals and fuels. To assess the potential synergies of processing both plant and microbial oils, the economic and environmental implications of integrating microbial oil production at oilcane and sugarcane biorefineries were characterized. Due to decreased crop yields that lead to higher simulated feedstock prices and lower biorefinery capacities, current oilcane prototypes result in higher costs and carbon intensities than microbial oil from sugarcane. To inform oilcane feedstock development, we calculated the required biomass yields (as a function of oil content) for oilcane to achieve financial parity with sugarcane. At 10 dw% oil, oilcane can sustain up to 30% less yield than sugarcane and still be more profitable in all simulated scenarios. Assuming continued improvements in microbial oil production from cane juice, achieving this target results in a minimum biodiesel selling price of 1.34 [0.90, 1.85] USD∙L –1 (presented as median [5th, 95th] percentiles), a carbon intensity of 0.51 [0.47, 0.55] kg CO 2 e L –1 , and a total biodiesel yield of 2140 [1870, 2410] L ha –1 year –1 . Compared to biofuel production from soybean, this outcome is equivalent to 3.0–3.9 as much biofuel per hectare of land and a 57%–63% reduction in carbon intensity. While only 20% of simulated scenarios fell within the market price range of biodiesel (0.45–1.11 USD∙L –1 ), if the oilcane biomass yield would improve to 25.6 DMT∙ha –1 ∙y –1 (an equivalent yield to sugarcane) 87% of evaluated scenarios would have a minimum biodiesel selling price within or below the market price range.

09 BIOMASS FUELS↗
DOE OSTI2025

Improved Understanding of Multicentury Greenland Ice Sheet Response to Strong Warming in the Coupled CESM2‐CISM2 With Regional Grid Refinement

The simulation of ice sheet‐climate interactions, such as surface mass balance fluxes, is sensitive to model grid resolution. Here we simulate the multi‐century evolution of the Greenland Ice Sheet (GrIS) and its interaction with the climate using the Community Earth System Model version 2.2 (CESM2.2) including an interactive GrIS component (the Community Ice Sheet Model v2.1 [CISM2.1]) under an idealized warming scenario (atmospheric CO 2 increases by 1% yr -1 until quadrupling the pre‐industrial level and then is held fixed). A variable‐resolution (VR) grid with 1/4° regional refinement over the broader Arctic and 1° resolution elsewhere is applied to the atmosphere and land components, and the results are compared with conventional 1° lat‐lon grid simulations to investigate the impact of grid refinement. Compared with the 1° runs, the VR run features a slower rate of surface melt, especially over the western and northern GrIS, where the ice surface slopes gently toward the periphery. This difference pattern originates primarily from higher snow albedo and, thus, weaker albedo feedback in the VR run. The VR grid better captures the CISM ice sheet topography by reducing elevation discrepancies between CAM and CISM and is, therefore, less reliant on the downscaling algorithm, which is known to underestimate albedo gradients. The sea level rise contribution from the GrIS in the VR run is 53 mm by year 150 and 831 mm by year 350, approximately 40% and 20% less than that of the 1° runs, respectively.

Earth System Model↗
DOE OSTI2026

The relative importance of wind and hydroclimate drivers in modulating the interannual variability of dust emissions in Earth system models

Windblown dust emissions are controlled by near-surface wind speed and sediment erodibility, the latter modulated by hydroclimate and land-use conditions. Accurate representations of these drivers are critical for reproducing historical dust variability and projecting future dust changes in Earth system models (ESMs). This study examines the discrepancies among 21 ESMs in the relative importance of wind speed versus five hydroclimate drivers in explaining the historical (1980–2014) variability of dust emissions from global drylands. In hyperarid areas, models show poor agreement in the simulated dust variability, with only 9 % out of 210 inter-model comparisons exhibiting significant positive correlations. In contrast, arid and semiarid areas exhibit a dual pattern driven by a “double-edged sword” effect of land surface memory: models with coherent hydroclimate variability show better agreement, whereas those with divergent hydroclimate representations show larger disagreement. While the ESMs capture the dominant role of wind speed in hyperarid areas, they diverge markedly in the relative contributions of wind and hydroclimate drivers in arid and semiarid areas. Replacing the Zender et al. (2003) dust scheme with the Kok et al. (2014) scheme in CESM and E3SM generally strengthens hydroclimate influences while reducing wind speed contributions to simulated dust variability. MERRA-2 reanalysis produces stronger wind influences than most ESMs across all dryland regions. These results underscore the need for improved near-surface wind simulations in hyperarid areas and more realistic land surface and hydroclimate representations in arid and semiarid areas to reduce uncertainties in global dust emission simulations.

Li, Xinzhu [Michigan Technological University, Hou↗
DOE OSTI2023

A new process-based and scale-aware desert dust emission scheme for global climate models – Part I: Description and evaluation against inverse modeling emissions

Desert dust accounts for most of the atmosphere's aerosol burden by mass and produces numerous important impacts on the Earth system. However, current global climate models (GCMs) and land-surface models (LSMs) struggle to accurately represent key dust emission processes, in part because of inadequate representations of soil particle sizes that affect the dust emission threshold, surface roughness elements that absorb wind momentum, and boundary-layer characteristics that control wind fluctuations. Furthermore, because dust emission is driven by small-scale (~ 1 km or smaller) processes, simulating the global cycle of desert dust in GCMs with coarse horizontal resolutions (~ 100 km) presents a fundamental challenge. This representation problem is exacerbated by dust emission fluxes scaling nonlinearly with wind speed above a threshold wind speed that is sensitive to land-surface characteristics. Here, we address these fundamental problems underlying the simulation of dust emissions in GCMs and LSMs by developing improved descriptions of (1) the effect of soil texture on the dust emission threshold, (2) the effects of nonerodible roughness elements (both rocks and green vegetation) on the surface wind stress, and (3) the effects of boundary-layer turbulence on driving intermittent dust emissions. We then use the resulting revised dust emission parameterization to simulate global dust emissions in a standalone model forced by reanalysis meteorology and land-surface fields. We further propose (4) a simple methodology to rescale lower-resolution dust emission simulations to match the spatial variability of higher-resolution emission simulations in GCMs. The resulting dust emission simulation shows substantially improved agreement against regional dust emissions observationally constrained by inverse modeling. We thus find that our revised dust emission parameterization can substantially improve dust emission simulations in GCMs and LSMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Historical global Earth System Model simulations with E3SM's dynamic root module

This data package contains global-scale Earth System Model simulations run with DOE's E3SM Model. The package includes one set of simulations run in the default configuration and a second set of simulations run with the dynamic root module enabled. These two datasets can be used to assess the impact that dynamic roots have on Land Surface fluxes such as carbon and water. The outputs are provided here on a 0.5 x 0.5 global grid at monthly resolution. The simulations were run with atmospheric forcing from the Global Soil Wetness Project. We provide specifically here Gross Primary Production, Transpiration, relative root fraction per soil layer as well as Air Temperature, Precipitation and all the parameterizations used for the simulations. Our purpose for generating and analyzing these simulations was to assess the role that root dynamics and foraging for water has in the recovery timescale of ecosystems following climate perturbation. All data provided are in the "netcdf" format using standard CF-1 (Climate and Forecast) Convention. The data are broken up into 20 year chunks to facilitate easier read-in. The data are all machine readable using various software platforms including Matlab, NCO, Panoply and GrADS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Improving North American Wildfire Prediction by Integrating a Machine-Learning Fire Model in a Land Surface Model

Wildfires have shown increasing trends in both frequency and severity across the Contiguous United States (CONUS). However, process-based fire models have difficulties in accurately simulating the burned area over the CONUS due to a simplification of the physical process and cannot capture the interplay among fire, ignition, climate, and human activities. The deficiency of burned area simulation deteriorates the description of fire impact on energy balance, water budget, and carbon fluxes in the Earth System Models (ESMs). Alternatively, machine learning (ML) based fire models, which capture statistical relationships between the burned area and environmental factors, have shown promising burned area predictions and corresponding fire impact simulation. We develop a hybrid framework (ML4Fire-XGB) that integrates a pretrained eXtreme Gradient Boosting (XGBoost) wildfire model with the Energy Exascale Earth System Model (E3SM) land model (ELM) version 2.1. A Fortran-C-Python deep learning bridge is adapted to support online communication between ELM and the ML fire model. Specifically, the burned area predicted by the ML-based wildfire model is directly passed to ELM to adjust the carbon pool and vegetation dynamics after disturbance, which are then used as predictors in the ML-based fire model in the next time step. Evaluated against the historical burned area from Global Fire Emissions Database 5 from 2001-2020, the ML4Fire-XGB model outperforms process-based fire models in terms of spatial distribution and seasonal variations. Sensitivity analysis confirms that the ML4Fire-XGB well captures the responses of the burned area to rising temperatures. The ML4Fire-XGB model has proved to be a new tool for studying vegetation-fire interactions, and more importantly, enables seamless exploration of climate-fire feedback, working as an active component in E3SM.

54 ENVIRONMENTAL SCIENCES↗