Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Hormonal responses of metoclopramide-treated subjects experiencing nausea or emesis during parabolic flight

The concentrations of adrenocorticotropic hormone (ACTH), vasopressin (AVP), epinephrine (EPI), and norepinephrine (NE) in 22 subjects administered 10 to 20 mg of metoclopramide prior to parabolic flight are measured. The effect of metoclopramide on motion sickness is examined. It is observed that metoclopramide is ineffective in the modulation of motion sickness due to stressful linear and angular acceleration and orbital flight, and it does not affect serum hormones prior to parabolic flight. It is detected that the serum level of AVP declines following emesis induced by parabolic flight and stressful angular acceleration; the serum levels of ACTH and EPI are elevated by parabolic flight and stressful angular acceleration; and serum NE is significantly elevated immediately following emesis. The possible roles of these hormones in the etiology of space motion sickness are discussed.

Kohl, Randall L.↗
NASA NTRS1992

Laboratory demonstrations of superconducting gravity and inertial sensors for space and airborne gravity measurements

The paper describes the superconducting gravity gradiometers (SGGs) and superconducting accelerometers being developed at the University of Maryland, which take advantage of many exotic properties of superconductivity to obtain the required low noise, high stability, and large dynamic range. Results of laboratory demonstrations of some of these instruments are presented together with the design and operating principles. Particular attention is given to the three-axis Model II SGG and a six-axis superconducting accelerometer model (Model I SSA). Model II SGG, after a residual common-mode balance, exhibited a noise level of 0.05/sq rt Hz above 0.1 Hz and a 1/f-squared noise below 0.1 Hz. All six channels of Model I SSA operated simultaneously with linear and angular acceleration noise levels of 3 x 10 exp -10 g(E)/sq rt Hz and 5 x 10 exp -8 rad/sec per sec per sq rt Hz, respectively.

Paik, Ho J.↗
NASA NTRS1990

Direct Numerical Simulations of Turbulent Convection: Variable Gravity and Uniform Rotation - Part 1

Turbulent convection may have played a major role in determining the structure and evolution of the primordial solar nebula, but current, incomplete models of convection and turbulence give very different results and remain largely untested in the absence of detailed astronomical observations. Numerical simulations provide an 'experimental' database for comparison with these models, and, to this end, direct numerical simulations of turbulent convection were performed with modifications intended to mimic some of the unique physical features of thin accretion disks, such as the primordial solar nebula: internal heating, a gravitational acceleration that is linearly proportional to the distance from midplane of the nebula, and rapid rotation. Peclet numbers in the simulations are comparable to those in solar nebula models; Rossby numbers in the simulations are an order of magnitude larger than those in solar nebula models because of the unrealistically high Prandtl and low, Reynolds numbers required to resolve all scales of the convective flow. We find that, despite the loss of buoyancy at midplane, turbulent motions easily penetrate the midplane region with little loss of intensity, providing efficient transport of heat and turbulent kinetic energy throughout the interior. A simple mixing length model modified to include rotation is found to give convective heat fluxes for the interior flow in rough agreement with the numerical simulations. We discuss these preliminary results with regard to assumptions about heating distributions and convective heat fluxes made in standard solar nebula models. More definitive comparisons with solar nebula modelling will become possible when more realistic effects of shear, density, stratification, and compression are included.

Cabot, W.↗
NASA NTRS1996

Otolith-Canal Convergence in Vestibular Nuclei Neurons

During manned spaceflight, acute vestibular disturbances often occur, leading to physical duress and a loss of performance. Vestibular adaptation to the weightless environment follows within two to three days yet the mechanisms responsible for the disturbance and subsequent adaptation are still unknown In order to understand vestibular system function in space and normal earth conditions the basic physiological mechanisms of vestibular information co coding must be determined. Information processing regarding head movement and head position with respect to gravity takes place in the vestibular nuclei neurons that receive signals From the semicircular canals and otolith organs in the vestibular labyrinth. These neurons must synthesize the information into a coded output signal that provides for the head and eye movement reflexes as well as the conscious perception of the body in three-dimensional space The current investigation will for the first time. determine how the vestibular nuclei neurons quantitatively synthesize afferent information from the different linear and angular acceleration receptors in the vestibular labyrinths into an integrated output signal. During the second year of funding, progress on the current project has been focused on the anatomical orientation of semicircular canals and the spatial orientation of the innervating afferent responses. This information is necessary in order to understand how vestibular nuclei neurons process the incoming afferent spatial signals particularly with the convergent otolith afferent signals that are also spatially distributed Since information from the vestibular nuclei is presented to different brain regions associated with differing reflexive and sensory functions it is important to understand the computational mechanisms used by vestibular neurons to produce the appropriate output signal.

Dickman, J. David↗
NASA NTRS1999

Entry Guidance for the Reusable Launch Vehicle

The X-33 Advanced Technology Demonstrator is a half-scale prototype developed to test the key technologies needed for a full-scale single-stage reusable launch vehicle (RLV). The X-33 is a suborbital vehicle that will be launched vertically, and land horizontally. The goals of this research were to develop an alternate entry guidance scheme for the X-33 in parallel to the actual X-33 entry guidance algorithms, provide comparative and complementary study, and identify potential new ways to improve entry guidance performance. Toward these goals, the nominal entry trajectory is defined by a piecewise linear drag-acceleration-versus-energy profile, which is in turn obtained by the solution of a semi-analytical parameter optimization problem. The closed-loop guidance is accomplished by tracking the nominal drag profile with primarily bank-angle modulation on-board. The bank-angle is commanded by a single full-envelope nonlinear trajectory control law. Near the end of the entry flight, the guidance logic is switched to heading control in order to meet strict conditions at the terminal area energy management interface. Two methods, one on ground-track control and the other on heading control, were proposed and examined for this phase of entry guidance where lateral control is emphasized. Trajectory dispersion studies were performed to evaluate the effectiveness of the entry guidance algorithms against a number of uncertainties including those in propulsion system, atmospheric properties, winds, aerodynamics, and propellant loading. Finally, a new trajectory-regulation method is introduced at the end as a promising precision entry guidance method. The guidance principle is very different and preliminary application in X-33 entry guidance simulation showed high precision that is difficult to achieve by existing methods.

Lu, Ping↗
NASA NTRS1997

Jerk Minimization Method for Vibration Control in Buildings

In many vibration minimization control problems for high rise buildings subject to strong earthquake loads, the emphasis has been on a combination of minimizing the displacement, the velocity and the acceleration of the motion of the building. In most cases, the accelerations that are involved are not necessarily large but the change in them (jerk) are abrupt. These changes in magnitude or direction are responsible for most building damage and also create discomfort like motion sickness for inhabitants of these structures because of the element of surprise. We propose a method of minimizing also the jerk which is the sudden change in acceleration or the derivative of the acceleration using classical linear quadratic optimal controls. This was done through the introduction of a quadratic performance index involving the cost due to the jerk; a special change of variable; and using the jerk as a control variable. The values of the optimal control are obtained using the Riccati equation.

Abatan, Ayo O.↗
NASA NTRS1992

Stabilization of gaze during circular locomotion in darkness. II. Contribution of velocity storage to compensatory eye and head nystagmus in the running monkey

1. Yaw eye in head (Eh) and head on body velocities (Hb) were measured in two monkeys that ran around the perimeter of a circular platform in darkness. The platform was stationary or could be counterrotated to reduce body velocity in space (Bs) while increasing gait velocity on the platform (Bp). The animals were also rotated while seated in a primate chair at eccentric locations to provide linear and angular accelerations similar to those experienced while running. 2. Both animals had head and eye nystagmus while running in darkness during which slow phase gaze velocity on the body (Gb) partially compensated for body velocity in space (Bs). The eyes, driven by the vestibuloocular reflex (VOR), supplied high-frequency characteristics, bringing Gb up to compensatory levels at the beginning and end of the slow phases. The head provided substantial gaze compensation during the slow phases, probably through the vestibulocollic reflex (VCR). Synchronous eye and head quick phases moved gaze in the direction of running. Head movements occurred consistently only when animals were running. This indicates that active body and limb motion may be essential for inducing the head-eye gaze synergy. 3. Gaze compensation was good when running in both directions in one animal and in one direction in the other animal. The animals had long VOR time constants in these directions. The VOR time constant was short to one side in one animal, and it had poor gaze compensation in this direction. Postlocomotory nystagmus was weaker after running in directions with a long VOR time constant than when the animals were passively rotated in darkness. We infer that velocity storage in the vestibular system had been activated to produce continuous Eh and Hb during running and to counteract postrotatory afterresponses. 4. Continuous compensatory gaze nystagmus was not produced by passive eccentric rotation with the head stabilized or free. This indicates that an aspect of active locomotion, most likely somatosensory feedback, was responsible for activating velocity storage. 5. Nystagmus was compared when an animal ran in darkness and in light. the beat frequency of eye and head nystagmus was lower, and the quick phases were larger in darkness. The duration of head and eye quick phases covaried. Eye quick phases were larger when animals ran in darkness than when they were passively rotated. The maximum velocity and duration of eye quick phases were the same in both conditions. 6. The platform was counterrotated under one monkey in darkness while it ran in the direction of its long vestibular time constant.(ABSTRACT TRUNCATED AT 400 WORDS).

NASA Discipline Neuroscience↗
NASA NTRS2004

NASA Tech Briefs, February 2004

Topics include: Simulation Testing of Embedded Flight Software; Improved Indentation Test for Measuring Nonlinear Elasticity; Ultraviolet-Absorption Spectroscopic Biofilm Monitor; Electronic Tongue for Quantitation of Contaminants in Water; Radar for Measuring Soil Moisture Under Vegetation; Modular Wireless Data-Acquisition and Control System; Microwave System for Detecting Ice on Aircraft; Routing Algorithm Exploits Spatial Relations; Two-Finger EKG Method of Detecting Evasive Responses; Updated System-Availability and Resource-Allocation Program; Routines for Computing Pressure Drops in Venturis; Software for Fault-Tolerant Matrix Multiplication; Reproducible Growth of High-Quality Cubic-SiC Layers; Nonlinear Thermoelastic Model for SMAs and SMA Hybrid Composites; Liquid-Crystal Thermosets, a New Generation of High-Performance Liquid-Crystal Polymers; Formulations for Stronger Solid Oxide Fuel-Cell Electrolytes; Simulation of Hazards and Poses for a Rocker-Bogie Rover; Autonomous Formation Flight; Expandable Purge Chambers Would Protect Cryogenic Fittings; Wavy-Planform Helicopter Blades Make Less Noise; Miniature Robotic Spacecraft for Inspecting Other Spacecraft; Miniature Ring-Shaped Peristaltic Pump; Compact Plasma Accelerator; Improved Electrohydraulic Linear Actuators; A Software Architecture for Semiautonomous Robot Control; Fabrication of Channels for Nanobiotechnological Devices; Improved Thin, Flexible Heat Pipes; Miniature Radioisotope Thermoelectric Power Cubes; Permanent Sequestration of Emitted Gases in the Form of Clathrate Hydrates; Electrochemical, H2O2-Boosted Catalytic Oxidation System; Electrokinetic In Situ Treatment of Metal-Contaminated Soil; Pumping Liquid Oxygen by Use of Pulsed Magnetic Fields; Magnetocaloric Pumping of Liquid Oxygen; Tailoring Ion-Thruster Grid Apertures for Greater Efficiency; and Lidar for Guidance of a Spacecraft or Exploratory Robot.

Source record↗
NASA NTRS2018

Practical Orbit Determination for Aerobraking with Accumulated Accelerometer Data

Navigation during aerobraking missions has historically relied solely on radiometric Doppler data. Accelerometer data, available on all modern spacecraft, has the potential to supplement Doppler data, increasing operational tempos, filling tracking data gaps, and improving the accuracy of orbit determination solutions. However, integration of Doppler and accelerometer data into the batch filter solutions used for operational navigation has proven to be practically challenging, due to the narrow region of adequate linear approximation for acceleration incurred by drag. This work proposes to use the accumulated velocity changes derived from these values as a more compatible data type. Demonstrations of results focus on NASA’s Maven and ESA’s TGO mission, and how this technique can be used to improve operations for the upcoming Maven aerobraking phase with reduced tracking data and lighter staffing requirements.

Young, Brian↗
NASA NTRSDate not supplied

Toward A Method for Scaling Human Body Models in an IMU-Based Workflow

- Scaled biomechanical models can more accurately inform crew health decisions when tailored to the wide range of astronaut sizes. One component to improve scaling of existing models to better represent each unique astronaut’s size is the individual length scaling of limbs. Traditionally, limb lengths are determined by motion capture or manual measurement. - A new method is herein proposed for length scaling which can be done by measuring linear and angular accelerations at a desired point during isolated motion around a point of rotation, then calculating the distance between the desired point and point of rotation. - When an Inertial Measurement Unit (IMU) device is placed at the distal point of a limb, the isolated motion is about that limb’s proximal joint. This method of scaling limb segments can be used for any limb that has an easily defined proximal joint for the limb to rotate around including hands, arms, legs, feet. - Calculated limb lengths are then used to scale models to each unique astronaut’s size, thereby improving the applicability of the model. - This method was investigated as a possible away to obtain scaling information in data collections where IMUs are worn, but optical motion capture may not always be available, such as inside spacesuits or during crew exercise on the International Space Station.

E. K. Marecki↗
NASA NTRS1989

Computational Aspects of Sensitivity Calculations in Linear Transient Structural Analysis

A study has been performed focusing on the calculation of sensitivities of displacements, velocities, accelerations, and stresses in linear, structural, transient response problems. One significant goal was to develop and evaluate sensitivity calculation techniques suitable for large-order finite element analyses. Accordingly, approximation vectors such as vibration mode shapes are used to reduce the dimensionality of the finite element model. Much of the research focused on the accuracy of both response quantities and sensitivities as a function of number of vectors used. Two types of sensitivity calculation techniques were developed and evaluated. The first type of technique is an overall finite difference method where the analysis is repeated for perturbed designs. The second type of technique is termed semianalytical because it involves direct, analytical differentiation of the equations of motion with finite difference approximation of the coefficient matrices. To be computationally practical in large-order problems, the overall finite difference methods must use the approximation vectors from the original design in the analyses of the perturbed models.

Greene, William H.↗
NASA NTRS1988

Cosmic-ray transport in accelerating flows

The quasi-linear transport equation of energetic charged particles is derived, including scattering by Alfven waves propagating parallel and antiparallel to a uniform magnetic field, losses by synchrotron radiation, and acceleration of the cold background fluid supporting the waves. As in the comoving frame equations of radiative transfer, scattering, and loss terms are evaluated in the frame in which the fluid is locally at rest. The diffusion approximation is applied to the resulting equation, yielding a transport equation for the isotropic part of the distribution function and a first-order approximation to the anisotropy. The conditions under which this approximation may be applied are discussed. In the nonrelativistic regime, the standard equation of the diffusion approximation is recovered. As contributions previously investigated, new effects appear from the spatial and temporal variations of the fluid velocity as well as the synchrotron radiation terms. These are discussed in detail.

Kirk, John G.↗
NASA NTRS1961

A Theoretical Treatment of the Steady-Flow, Linear, Crossed-Field, Direct-Current Plasma Accelerator for Inviscid, Adiabatic, Isothermal, Constant-Area Flow

The theory is developed from the individual equations of motion of the three components of the plasma. The effect of the ion cyclotron angle (omega tau), which is the product of the ion cyclotron frequency and the ion mean free time between collisions with neutral particles and which is proportional to the axial component of the ion slip velocity, on both Joule heating rate and accelerator length is included in the results and is shown to be small only for values of about 10(exp -3) radian or less.

Wood, George P.↗
NASA NTRS1992

Quasi-linear velocity space diffusion of heavy cometary pickup ions on bispherical diffusion characteristics

We consider an ion transport equation describing the source, convection, adiabatic acceleration, and quasi-linear velocity diffusion of cometary pickup ions. The equation is solved numerically along solar wind plasma flow lines for the environment of Comet Halley, to obtain distributions at positions on the Giotto spacecraft trajectory which may be compared with observations. We obtain full two-dimensional (pitch angle and velocity) numerical distributions which show pitch angle scattering about the wave scattering centers at +/- V(A), where V(A) is the Alfven wave speed in the solar wind frame. Peak ion phase-space densities approximately follow the bispherical shell geometry. The energy distributions F(v) agree well with Giotto observations at lower v, but in the high-energy tail there is evidence possibly for the first-order Fermi acceleration mechanism taking place in the Comet Halley foreshock region.

Huddleston, D. E.↗
NASA NTRS2009

Apparatus and method to pulverize rock using a superconducting electromagnetic linear motor

A rock pulverizer device based on a superconducting linear motor. The superconducting electromagnetic rock pulverizer accelerates a projectile via a superconducting linear motor and directs the projectile at high speed toward a rock structure that is to be pulverized by collision of the speeding projectile with the rock structure. The rock pulverizer is comprised of a trapped field superconducting secondary magnet mounted on a movable car following a track, a wire wound series of primary magnets mounted on the track, and the complete magnet/track system mounted on a vehicle used for movement of the pulverizer through a mine as well as for momentum transfer during launch of the rock breaking projectile.

Ignatiev, Alex↗
NASA NTRS1977

Rayleigh-Taylor modes in constant-density incompressible fluids accelerated by radiation pressure

The paper examines the behavior of linear perturbations in an incompressible fluid undergoing acceleration by radiation pressure, with reference to processes occurring in quasars, supernovae, and planetary nebulae. It is shown that, contrary to prior expectation, fluids accelerated by radiation pressure, are not always unstable to Rayleigh-Taylor modes. Some are, in fact, unstable, but the nature of the instability is qualitatively different.

Krolik, J. H.↗