Search NASA⌕ Search

SEARCH · Search NASA

Results for “linking software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Digital Autonomous Terminal Access Communication (DATAC) system

In order to accommodate the increasing number of computerized subsystems aboard today's more fuel efficient aircraft, the Boeing Co. has developed the DATAC (Digital Autonomous Terminal Access Control) bus to minimize the need for point-to-point wiring to interconnect these various systems, thereby reducing total aircraft weight and maintaining an economical flight configuration. The DATAC bus is essentially a local area network providing interconnections for any of the flight management and control systems aboard the aircraft. The task of developing a Bus Monitor Unit was broken down into four subtasks: (1) providing a hardware interface between the DATAC bus and the Z8000-based microcomputer system to be used as the bus monitor; (2) establishing a communication link between the Z8000 system and a CP/M-based computer system; (3) generation of data reduction and display software to output data to the console device; and (4) development of a DATAC Terminal Simulator to facilitate testing of the hardware and software which transfer data between the DATAC's bus and the operator's console in a near real time environment. These tasks are briefly discussed.

Novacki, Stanley M., III↗

Orbiter Flying Qualities (OFQ) Workstation user's guide

This project was devoted to the development of a software package, called the Orbiter Flying Qualities (OFQ) Workstation, for working with the OFQ Archives which are specially selected sets of space shuttle entry flight data relevant to flight control and flying qualities. The basic approach to creation of the workstation software was to federate and extend commercial software products to create a low cost package that operates on personal computers. Provision was made to link the workstation to large computers, but the OFQ Archive files were also converted to personal computer diskettes and can be stored on workstation hard disk drives. The primary element of the workstation developed in the project is the Interactive Data Handler (IDH) which allows the user to select data subsets from the archives and pass them to specialized analysis programs. The IDH was developed as an application in a relational database management system product. The specialized analysis programs linked to the workstation include a spreadsheet program, FREDA for spectral analysis, MFP for frequency domain system identification, and NIPIP for pilot-vehicle system parameter identification. The workstation also includes capability for ensemble analysis over groups of missions.

Myers, Thomas T.↗

IMAT graphics manual

The Integrated Multidisciplinary Analysis Tool (IMAT) consists of a menu driven executive system coupled with a relational database which links commercial structures, structural dynamics and control codes. The IMAT graphics system, a key element of the software, provides a common interface for storing, retrieving, and displaying graphical information. The IMAT Graphics Manual shows users of commercial analysis codes (MATRIXx, MSC/NASTRAN and I-DEAS) how to use the IMAT graphics system to obtain high quality graphical output using familiar plotting procedures. The manual explains the key features of the IMAT graphics system, illustrates their use with simple step-by-step examples, and provides a reference for users who wish to take advantage of the flexibility of the software to customize their own applications.

Stockwell, Alan E.↗

Bi-Level Integrated System Synthesis (BLISS)

BLISS is a method for optimization of engineering systems by decomposition. It separates the system level optimization, having a relatively small number of design variables, from the potentially numerous subsystem optimizations that may each have a large number of local design variables. The subsystem optimizations are autonomous and may be conducted concurrently. Subsystem and system optimizations alternate, linked by sensitivity data, producing a design improvement in each iteration. Starting from a best guess initial design, the method improves that design in iterative cycles, each cycle comprised of two steps. In step one, the system level variables are frozen and the improvement is achieved by separate, concurrent, and autonomous optimizations in the local variable subdomains. In step two, further improvement is sought in the space of the system level variables. Optimum sensitivity data link the second step to the first. The method prototype was implemented using MATLAB and iSIGHT programming software and tested on a simplified, conceptual level supersonic business jet design, and a detailed design of an electronic device. Satisfactory convergence and favorable agreement with the benchmark results were observed. Modularity of the method is intended to fit the human organization and map well on the computing technology of concurrent processing.

Sobieszczanski-Sobieski, Jaroslaw↗

Bi-Level Integrated System Synthesis (BLISS)

BLISS is a method for optimization of engineering systems by decomposition. It separates the system level optimization, having a relatively small number of design variables, from the potentially numerous sub-system optimizations that may each have a large number of local design variables. The subsystem optimizations are autonomous and may be conducted concurrently. Subsystem and system optimizations alternate, linked by sensitivity data, producing a design improvement in each iteration. Starting from a best guess initial design, the method improves that design in iterative cycles, each cycle comprised of two steps. In step one, the system level variables are frozen and the improvement is achieved by separate, concurrent, and autonomous optimizations in the local variable subdomains. In step two, further improvement is sought in the space of the system level variables. Optimum sensitivity data link the second step to the first. The method prototype was implemented using MATLAB and iSIGHT programming software and tested on a simplified, conceptual level supersonic business jet design, and a detailed design of an electronic device.

Sobieszczanski-Sobieski, Jaroslaw↗

Some Aeronautical Communications Experiments

Classically there has existed an asymmetry between the computing and communicating sides of aerospace systems. Over the past few decades, this asymmetry has shifted to favoring communication link technologies, meaning that advancements in available central processing units (CPUs), storage devices, and internal data buses have stagnated. Indeed, the increased emphasis placed on refining subsystem performance such as with antenna bandwidth in phased arrays, amplifier power efficiency, software defined radio (SDR) flexibility and encoding for data compression and error correction has given rise to successful debuts of multi-gigabit-per-second data return from long space-link distances. These accomplishments are easily quantifiable through link budgets and illustrate what is possible, but also reveal the deficiencies in overall communications capabilities. In particular, the ever-accelerating presence of aerospace vehicles gives rise to newer and larger classes of challenges to address the needs of 21st century systems. Furthermore remote sensing and imaging capabilities have far outpaced our ability to transmit their products to the ground, so we are increasingly dependent on pre-processing and downselection to contend with the communications bottleneck. No longer may we depend upon the constrained logistics in delivering end-to-end data delivery through manual reconfigurations, static event scheduling and execution on a per-vehicle basis, for these methods do not scale and therefore must give way to dynamic, networked approaches with an overall systems view in mind. Emerging mission requirements exhibit a trend toward multiple smaller-scale vehicles working together to perform dissimilar observations. Such operations necessitate sensor fusion across a constellation, and where data processing may be distributed throughout a fairly disconnected network whose topology changes over time in non-deterministic manners. Individual communications link performance is still very relevant to deploying an effective communications system, but now must be embedded within a greater architecture of capability to optimally utilize the bandwidth available from each link to generate an ultimate end-to-end quality of service. The deleterious effects of timing uncertainty across the arrangement presents a challenge to measurement synchronization and delivery, so a successful deployed system needs to be tolerant to the delays inherent in time-of-light between elements and digital processing latencies existing at each node. In this presentation we share the flight test results from a high performance Gbps laser communications terminal evaluated with a suite of store and forward capabilities called High-rate Delay Tolerant Networking (HDTN). The communications payload is operated over Lake Erie across a range of configurations including several convergence layers, and is evaluated to determine recovery time after link disruptions, information loss, efficiency and speed. The effectiveness of utilizing a flying laboratory to increase the Technology Readiness Level (TRL) of an integrated system in relevant environments is discussed, as well as the value of conducting aeronautics experiments to retire risk for technology infusion into space missions. Upcoming flight campaigns will be presented, including opportunities to demonstrate secure command and control, data intensive hyperspectral imaging, quantum link characterization, 4k High Definition (HD) video streaming and internetworked space-ground-aero relay operations. These experiments will pave the way for future missions which will depend upon interoperability across disparate government and privately owned networks, involve contention with uncertain and dynamic timing, and require agility to autonomously configure optimal parameters across networks of ever-increasing size and complexity to ensure data delivery. https://www1.grc.nasa.gov/space/scan/acs/tech-studies/dtn/

Daniel Raible↗

TDRSS Onboard Navigation System (TONS) flight qualification experiment

The National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) is currently developing an operational Tracking and Data Relay Satellite (TDRS) System (TDRSS) Onboard Navigation System (TONS) to provide realtime, autonomous, high-accuracy navigation products to users of TDRSS. A TONS experiment was implemented on the Explorer Platform/Extreme Ultraviolet Explorer (EP/EUVE) spacecraft, launched June 7, 1992, to flight qualify the TONS operational system using TDRSS forward-link communications services. This paper provides a detailed evaluation of the flight hardware, an ultrastable oscillator (USO) and Doppler extractor (DE) card in one of the TDRSS user transponders and the ground-based prototype flight software performance, based on the 1 year of TONS experiment operation. The TONS experiment results are used to project the expected performance of the TONS 1 operational system. TONS 1 processes Doppler data derived from scheduled forward-link S-band services using a sequential estimation algorithm enhanced by a sophisticated process noise model to provide onboard orbit and frequency determination and time maintenance. TONS 1 will be the prime navigation system on the Earth Observing System (EOS)-AM1 spacecraft, currently scheduled for launch in 1998. Inflight evaluation of the USO and DE short-term and long-term stability indicates that the performance is excellent. Analysis of the TONS prototype flight software performance indicates that realtime onboard position accuracies of better than 25 meters root-mean-square are achievable with one tracking contact every one to two orbits for the EP/EUVE 525-kilometer altitude, 28.5 degree inclination orbit. The success of the TONS experiment demonstrates the flight readiness of TONS to support the EOS-AM1 mission.

Gramling, C. J.↗

IceVal DatAssistant: An Interactive, Automated Icing Data Management System

As with any scientific endeavor, the foundation of icing research at the NASA Glenn Research Center (GRC) is the data acquired during experimental testing. In the case of the GRC Icing Branch, an important part of this data consists of ice tracings taken following tests carried out in the GRC Icing Research Tunnel (IRT), as well as the associated operational and environmental conditions documented during these tests. Over the years, the large number of experimental runs completed has served to emphasize the need for a consistent strategy for managing this data. To address the situation, the Icing Branch has recently elected to implement the IceVal DatAssistant automated data management system. With the release of this system, all publicly available IRT-generated experimental ice shapes with complete and verifiable conditions have now been compiled into one electronically-searchable database. Simulation software results for the equivalent conditions, generated using the latest version of the LEWICE ice shape prediction code, are likewise included and are linked to the corresponding experimental runs. In addition to this comprehensive database, the IceVal system also includes a graphically-oriented database access utility, which provides reliable and easy access to all data contained in the database. In this paper, the issues surrounding historical icing data management practices are discussed, as well as the anticipated benefits to be achieved as a result of migrating to the new system. A detailed description of the software system features and database content is also provided; and, finally, known issues and plans for future work are presented.

Levinson, Laurie H.↗

FAIR Data Meets FAIR Software

Modern scientific research is increasingly defined by the interplay between data, software, and the workflows that connect them. Yet while the FAIR (Findable, Accessible, Interoperable, Reusable) principles have become foundational for scientific data stewardship, the same level of structure and expectation has only recently begun to extend to research software. This talk covers why and how FAIR principles are being applied to data and software to support data reuse. It outlines the gaps in current sharing norms, the growing federal emphasis on persistent identifiers and public access, and the opportunities created when datasets, computational workflows, code, and models are linked through rich, standardized metadata. Practical implementation pathways for the EIC and JLab communities are described, including datacards for structured dataset documentation and provenance-aware workflows. By aligning data lifecycle management with FAIR-aligned software practices, the scientific community can advance toward autonomous knowledge graphs, generative workflows, and high-quality, AI-ready scientific datasets.

McSpadden, Diana [Thomas Jefferson National Accele↗

Optical Software Defined Radio Transmitter Extinction Ratio Enhancement with Differential Pulse Carving

A unique challenge in the development of a deep space optical software defined radio (SDR) transmitter is the optimization of the extinction ratio (ER). For a Mars to Earth optical link, an ER approaching 40dB may be necessary. However, a high ER can be difficult to achieve at the low PPM orders and narrow slot widths required for high data rates. The quality of the digital signal transmitted by the SDR does not meet the amplitude and timing characteristics needed by an analog optical modulator. The conflicting implementation constraints of these two fundamentally different systems, the digital SDR and analog optical modulator, can make achieving the required ER very difficult. In this paper, the causes of fidelity loss at the interface between the SDR and optical modulator are discussed. The SDR signal quality requirements are derived and explored. It is shown that increasing the SDR signal quality enough to meet these requirements is impractical to implement due to bandwidth limitations of electronic components as well as Field Programmable Gate Array (FPGA) clock speed constraints. A novel optical modulation architecture based on low-voltage differential signaling and dual Mach-Zehnder modulators is presented which reduces the signal quality requirements on the SDR and increases the system ER.

Electro-Optic Modulator↗

Optical Software Defined Radio Transmitter Extinction Ratio Enhancement with Differential Pulse Carving

A unique challenge in the development of a deep space optical software defined radio (SDR) transmitter is the optimization of the extinction ratio (ER). For a Mars to Earth optical link, an ER approaching 40dB may be necessary. However, a high ER can be difficult to achieve at the low PPM orders and narrow slot widths required for high data rates. The quality of the digital signal transmitted by the SDR does not meet the amplitude and timing characteristics needed by an analog optical modulator. The conflicting implementation constraints of these two fundamentally different systems, the digital SDR and analog optical modulator, can make achieving the required ER very difficult. In this paper, the causes of fidelity loss at the interface between the SDR and optical modulator are discussed. The SDR signal quality requirements are derived and explored. It is shown that increasing the SDR signal quality enough to meet these requirements is impractical to implement due to bandwidth limitations of electronic components as well as Field Programmable Gate Array (FPGA) clock speed constraints. A novel optical modulation architecture based on low-voltage differential signaling and dual Mach-Zehnder modulators is presented which reduces the signal quality requirements on the SDR and increases the system ER.

Electro-Optic Modulator↗

Small Satellite Reliability Initiative (SSRI) Knowledge Base Tool: Update and Future Direction

NASA’s Small Satellite Reliability Initiative (SSRI), in conjunction with NASA’s Small Spacecraft Systems Virtual Institute (S3VI), has developed the SSRI Knowledge Base to improve mission confidence for small spacecraft. The SSRI Knowledge Base is a comprehensive and searchable online tool that consolidates and organizes resources, best practices, and lessons learned from previous small satellite missions sponsored by NASA, other government agencies, and academia. This free, publicly available tool is available to the entire SmallSat community at: NASA SSRI Knowledge Base | Explore. The SSRI Knowledge Base provides vetted, high-quality sources of information on elements that are key to successful small satellite missions. These resources include SSRI working group generated documents and presentations in addition to existing guides, publications, standards, software tools, websites, and books. The Knowledge Base is fully searchable, offers downloadable content when possible, and otherwise links to or references content directly from within the tool. All 58 of the planned topic pages that comprise the SSRI Knowledge Base have been recently completed and include over 450 unique resources that are now available for review. Over the past several months significant enhancements to the tool’s capabilities have been developed and implemented. These enhancements consist of the completed baseline content; development of an Application Programming Interface (API); improved user interfaces; scalable and searchable Best Practices and Lessons Learned (BPLL) lists with ratings; and custom website analytics. This presentation and paper will discuss the motivation for and development of the SSRI Knowledge Base, demonstrate the existing tool, and outline plans for further development. The SSRI is a collaborative activity with broad participation from civil, Department of Defense, and both national and international commercial space systems providers and stakeholders. The S3VI is jointly sponsored by NASA’s Space Technology Mission Directorate and Science Mission Directorate.

Small Spacecraft↗

The SSRI Knowledge Base Tool: Current Tool Functionality Review and Planned Future Enhancements

NASA’s Small Satellite Reliability Initiative (SSRI), in conjunction with NASA’s Small Spacecraft Systems Virtual Institute (S3VI), has developed the SSRI Knowledge Base to improve mission confidence for small spacecraft. The SSRI Knowledge Base provides vetted, high-quality sources of information on elements that are key to successful small spacecraft missions. These resources include SSRI working group generated documents and presentations in addition to existing guides, publications, standards, software tools, websites, and books. The Knowledge Base is fully searchable, offers downloadable content when possible, and otherwise links to or references content directly from within the tool. All 58 of the planned topic pages that comprise the SSRI Knowledge Base have been recently completed and include over 450 unique resources that are now available for review. Over the past several months significant enhancements to the tool’s capabilities have been developed and implemented. These enhancements consist of the completed baseline content; development of an Application Programming Interface (API); improved user interfaces; scalable and searchable Best Practices and Lessons Learned (BPLL) lists with ratings; and custom website analytics. The SSRI Knowledge Base is a comprehensive and searchable online tool that consolidates and organizes resources, best practices, and lessons learned from previous small spacecraft missions sponsored by NASA, other government agencies, and academia. This free, publicly available tool is available to the entire SmallSat community at: NASA SSRI Knowledge Base | Explore. This presentation will discuss the motivation for and development of the SSRI Knowledge Base, demonstrate the existing tool, share how the smallsat community can get involved and outline plans for further enhancement development. The SSRI is a collaborative activity with broad participation from civil, Department of Defense, and both national and international commercial space systems providers and stakeholders. The S3VI is jointly sponsored by NASA’s Space Technology Mission Directorate and Science Mission Directorate.

Small Spacecraft↗

Small Satellite Reliability Initiative (SSRI) Knowledge Base Tool: Use Case Review and Future Functionality and Content Direction

NASA’s Small Satellite Reliability Initiative (SSRI), in conjunction with NASA’s Small Spacecraft Systems Virtual Institute (S3VI), has developed the SSRI Knowledge Base to improve mission confidence for small spacecraft. The SSRI is a collaborative activity with broad participation from civil, Department of Defense, and both national and international commercial space systems providers and stakeholders. The S3VI is jointly sponsored by NASA’s Space Technology Mission Directorate and Science Mission Directorate. The SSRI Knowledge Base is a comprehensive and searchable online tool that consolidates and organizes resources, best practices, and lessons learned from previous small satellite missions sponsored by NASA, other government agencies, and academia. This free, publicly available tool is available to the entire SmallSat community at https://s3vi.ndc.nasa.gov/ssri-kb/. The SSRI Knowledge Base provides vetted, high-quality sources of information on elements that are key to successful small satellite missions. These resources include SSRI working group generated documents and presentations in addition to existing guides, publications, standards, software tools, websites, and books. The Knowledge Base is fully searchable, offers downloadable content when possible, and otherwise links to or references content directly from within the tool. All 58 of the planned topic pages that comprise the SSRI Knowledge Base have been recently completed and include over 450 unique resources that are now available for review. Over the past several months, significant enhancements to the tool’s capabilities have been developed and implemented. These enhancements consist of the completed baseline content, an Application Programming Interface (API), improved user interfaces, new interfaces for crowdsourcing of content and user ratings, and custom website analytics to inform future development. This presentation and paper will discuss the motivation for the SSRI Knowledge Base, review educational use case(s), and outline plans for further development. The 2022 session topic that best fits the abstract (select only one): Coordinating Successful Educational Programs

Small Spacecraft↗

Small Satellite Reliability Initiative (SSRI) Knowledge Base Tool: Update and Future Direction

The Small Satellite Reliability Initiative (SSRI)Knowledge Base is a comprehensive and searchable online tool that consolidates and organizes resources, best practices, and lessons learned from previous small satellite missions sponsored by NASA, other government agencies, and academia. This free, publicly available tool is available to the entire SmallSat community. The SSRI Knowledge Base provides vetted, high-quality sources of information on elements that are key to successful small satellite missions. These resources include SSRI working group generated documents and presentations in addition to existing guides, publications, standards, software tools, websites, and books. The Knowledge Base is fully searchable, offers downloadable content when possible, and otherwise links to or references content directly from within the tool. This presentation and paper will discuss the motivation for and development of the SSRI Knowledge Base, demonstrate the existing tool, and outline plans for further development. The SSRI is a collaborative activity with broad participation from civil, Department of Defense, and both national and international commercial space systems providers and stakeholders. NASA’s Small Spacecraft Systems Virtual Institute (S3VI) funds the SSRI Knowledge Base. The S3VIis jointly sponsored by NASA’s Space Technology Mission Directorate and Science Mission Directorate.

Small Spacecraft↗

The SSRI Knowledge Base Tool: Current Tool Functionality Review and Planned Future Enhancements

NASA’s Small Satellite Reliability Initiative (SSRI), in conjunction with NASA’s Small Spacecraft Systems Virtual Institute (S3VI), has developed the SSRI Knowledge Base to improve mission confidence for small spacecraft. The SSRI Knowledge Base provides vetted, high-quality sources of information on elements that are key to successful small spacecraft missions. These resources include SSRI working group generated documents and presentations in addition to existing guides, publications, standards, software tools, websites, and books. The Knowledge Base is fully searchable, offers downloadable content when possible, and otherwise links to or references content directly from within the tool. All 58 of the planned topic pages that comprise the SSRI Knowledge Base have been recently completed and include over 450 unique resources that are now available for review. Over the past several months significant enhancements to the tool’s capabilities have been developed and implemented. These enhancements consist of the completed baseline content; development of an Application Programming Interface (API); improved user interfaces; scalable and searchable Best Practices and Lessons Learned (BPLL) lists with ratings; and custom website analytics. The SSRI Knowledge Base is a comprehensive and searchable online tool that consolidates and organizes resources, best practices, and lessons learned from previous small spacecraft missions sponsored by NASA, other government agencies, and academia. This free, publicly available tool is available to the entire SmallSat community at: NASA SSRI Knowledge Base | Explore. This presentation will discuss the motivation for and development of the SSRI Knowledge Base, demonstrate the existing tool, share how the smallsat community can get involved and outline plans for further enhancement development. The SSRI is a collaborative activity with broad participation from civil, Department of Defense, and both national and international commercial space systems providers and stakeholders. The S3VI is jointly sponsored by NASA’s Space Technology Mission Directorate and Science Mission Directorate.

Small Spacecraft↗

Small Satellite Reliability Initiative (SSRI) Knowledge Base Tool: Update and Future Direction

NASA’s Small Satellite Reliability Initiative (SSRI), in conjunction with NASA’s Small Spacecraft Systems Virtual Institute (S3VI), has developed the SSRI Knowledge Base to improve mission confidence for small spacecraft. The SSRI Knowledge Base is a comprehensive and searchable online tool that consolidates and organizes resources, best practices, and lessons learned from previous small satellite missions sponsored by NASA, other government agencies, and academia. This free, publicly available tool is available to the entire SmallSat community at: NASA SSRI Knowledge Base | Explore. The SSRI Knowledge Base provides vetted, high-quality sources of information on elements that are key to successful small satellite missions. These resources include SSRI working group generated documents and presentations in addition to existing guides, publications, standards, software tools, websites, and books. The Knowledge Base is fully searchable, offers downloadable content when possible, and otherwise links to or references content directly from within the tool. All 58 of the planned topic pages that comprise the SSRI Knowledge Base have been recently completed and include over 450 unique resources that are now available for review. Over the past several months significant enhancements to the tool’s capabilities have been developed and implemented. These enhancements consist of the completed baseline content; development of an Application Programming Interface (API); improved user interfaces; scalable and searchable Best Practices and Lessons Learned (BPLL) lists with ratings; and custom website analytics. This presentation and paper will discuss the motivation for and development of the SSRI Knowledge Base, demonstrate the existing tool, and outline plans for further development. The SSRI is a collaborative activity with broad participation from civil, Department of Defense, and both national and international commercial space systems providers and stakeholders. The S3VI is jointly sponsored by NASA’s Space Technology Mission Directorate and Science Mission Directorate.

Small Spacecraft↗