Search NASA⌕ Search

SEARCH · Search NASA

Results for “links”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Handbook for the estimation of microwave propagation effects: Link calculations for earth-space paths (path loss and noise estimation)

A single model for a standard of comparison for other models when dealing with rain attenuation problems in system design and experimentation is proposed. Refinements to the Global Rain Production Model are incorporated. Path loss and noise estimation procedures as the basic input to systems design for earth-to-space microwave links operating at frequencies from 1 to 300 GHz are provided. Topics covered include gaseous absorption, attenuation by rain, ionospheric and tropospheric scintillation, low elevation angle effects, radome attenuation, diversity schemes, link calculation, and receiver noise emission by atmospheric gases, rain, and antenna contributions.

Crane, R. K.↗

A study of 60 Gigahertz intersatellite link applications

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

Anzic, G.↗

Kinetics of copper ion absorption by cross-linked calcium polyacrylate membranes

The absorption of copper ions from aqueous copper acetate solutions by cross-linked calcium acrylate membranes was found to obey parabolic kinetics similar to that found for oxidation of metals that form protective oxide layers. For pure calcium polyacrylate membranes the rate constant was essentially independent of copper acetate concentration and film thickness. For a cross-linked copolymer film of polyvinyl alcohol and calcium polyacrylate, the rate constant was much greater and dependent on the concentration of copper acetate. The proposed mechanism in each case involves the formation of a copper polyacrylate phase on the surface of the membrane. The diffusion of the copper ion through this phase appears to be the rate controlling step for the copolymer film. The diffusion of the calcium ion is apparently the rate controlling step for the calcium polyacrylate. At low pH, the copper polyacrylate phase consists of the normal copper salt; at higher pH, the phase appears to be the basic copper salt.

Philipp, W. H.↗

A flight investigation of simulated data link communications during single-pilot IFR flight

A Flight Data Console (FDC) was developed to allow simulation of a digital communications link to replace the current voice communication system used in air traffic control (ATC). The voice system requires manipulation of radio equipment, read-back of clearances, and mental storage of critical information items, all contributing to high workload, particularly during single-pilot operations. This was an inflight study to determine how a digital communications system might reduce cockpit workload, improve flight proficiency, and be accepted by general aviation pilots. Results show that instrument flight, including approach and landing, can be accomplished quite effectively using a digital data link system for ATC communications. All pilots expressed a need for a back-up voice channel. When included, this channel was used sparingly and principally to confirm any item of information about which there might be uncertainty.

Parker, J. F.↗

Evidence linking coronal mass ejections with interplanetary magnetic clouds

Using proxy data for the occurrence of those mass ejections from the solar corona which are directed earthward, we investigate the association between the post-1970 interplanetary magnetic clouds of Klein and Burlaga and coronal mass ejections. The evidence linking magnetic clouds following shocks with coronal mass ejections is striking; six of nine clouds observed at Earth were preceded an appropriate time earlier by meter-wave type II radio bursts indicative of coronal shock waves and coronal mass ejections occurring near central meridian. During the selected periods when no clouds were detected near Earth, the only type II bursts reported were associated with solar activity near the limbs. Where the proxy solar data to be sought are not so clearly suggested, that is, for clouds preceding interaction regions and clouds within cold magnetic enhancements, the evidence linking the clouds and coronal mass ejections is not as clear; proxy data usually suggest many candidate mass-ejection events for each cloud. Overall, the data are consistent with and support the hypothesis suggested by Klein and Burlaga that magnetic clouds observed with spacecraft at 1 AU are manifestations of solar coronal mass ejection transients.

Wilson, R. M.↗

Polyphenylene ethers with imide linking groups

Novel polyphenylene ethers with imide linking units are disclosed. These polymers incorporate the solvent and thermal resistance of polyimides and the processability of polyphenylene ethers. Improved physical properties over those of the prior art are obtained by incorporating meta linked ethers and/or polyphenylene oxides into the polymer backbone. A novel process for making polymers of this type is also disclosed. The process is unique in that the expected need of high process temperatures and/or special atmospheres are eliminated.

St.clair, T. L.↗

Kinetics of chromium ion absorption by cross-linked polyacrylate films

Three cross-linked ion exchange membranes were studied as to their ability to absorb chromium ion from aqueous chromium III nitrate solutions. Attention was given to the mechanism of absorption, composition of the absorbed product, and the chemical bonding. The membranes were: calcium polyacrylate, polyacrylic acid, and a copolymer of acrylic acid and vinyl alcohol. For the calcium polyacrylate and the copolymer, parabolic kinetics were observed, indicating the formation of a chromium polyacrylate phase as a coating on the membrane. The rate of absorption is controlled by the diffusion of the chromium ion through this coating. The product formed in the copolymer involves the formation of a coordination complex of a chromium ion with 6 carboxylic acid groups from the same molecule. The absorption of the chromium ion by the polyacrylic acid membranes appears to be more complicated, involving cross-linking. This is due to the coordination of the chromium ion with carboxylic acid groups from more than one polymer molecule. The absorption rate of the chromium ion by the calcium salt membrane was found to be more rapid than that by the free polyacrylic acid membrane.

May, C. E.↗

Land Mobile Satellite Service (LMSS) channel simulator: An end-to-end hardware simulation and study of the LMSS communications links

The design and implementation of the Land Mobile Satellite Service (LMSS) channel simulator as a facility for an end to end hardware simulation of the LMSS communications links, primarily with the mobile terminal is described. A number of studies are reported which show the applications of the channel simulator as a facility for validation and assessment of the LMSS design requirements and capabilities by performing quantitative measurements and qualitative audio evaluations for various link design parameters and channel impairments under simulated LMSS operating conditions. As a first application, the LMSS channel simulator was used in the evaluation of a system based on the voice processing and modulation (e.g., NBFM with 30 kHz of channel spacing and a 2 kHz rms frequency deviation for average talkers) selected for the Bell System's Advanced Mobile Phone Service (AMPS). The various details of the hardware design, qualitative audio evaluation techniques, signal to channel impairment measurement techniques, the justifications for criteria of different parameter selection in regards to the voice processing and modulation methods, and the results of a number of parametric studies are further described.

Salmasi, A. B.↗

CLASS - A comprehensive satellite link simulation package

CLASS (Communications Link Analysis and Simulation System) is a software package developed for NASA to predict the communications and tracking performance of the Tracking and Data Relay Satellite System (TDRSS) services. This paper describes the capabilities of CLASS and the communications link model used and discusses typical applications for CLASS.

Braun, W. R.↗

A study of 60 GHz intersatellite link applications

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

Anzic, G.↗

The Communications link analysis and simulation system (CLASS)

The Communications Link Analysis and Simulation System (CLASS) is a comprehensive, computerized communications and tracking system analysis tool under development by the Networks Directorate of the NASA/GSFC. The primary use of this system is to provide the capability to predict the performance of the Tracking and Data Relay Satellite system (TDRSS) User Communications and Tracking links through the TDRSS. The general capabilities and operational philosophy of the current and final versions of the CLASS are described along with some examples of analyses which have been performed utilizing the capabilities of this system.

Godfrey, R. D.↗

Data-link alternatives for the NASA pilot data systems

There are several preliminary, or pilot, efforts for developing data systems for supporting NASA science research. The Pilot Data Systems consist of the Pilot Land Data System (PLDS), the Pilot Ocean Data System (PODS), the Pilot Climate Data System (PCDS), and the Pilot Planetary Data System (PPDS). The PLDS is likely to have the greatest communication needs of the various pilots. Communications issues and requirements are examined in the context of the mature PLDS as it may exist by 1990. The PLDS is seen as a distributed processing system linking resources at a number of NASA research centers and outside universities. Large image data sets, including LANDSAT scenes, are a major data type to be moved along the PLDS communications network. The unusually large size of these data files requires examining new technologies that may allow efficient and affordable communication at rates of up to 60 megabits per second. Potentially useful developments include portable satellite ground stations, and time division multiple access for sharing high-speed satellite links. Further pooling of communications for the various data systems into a single network would reduce costs and may make economic justification of access to the required data rates possible.

Likens, W. C.↗

Computer model for a waveguide relay link

A computer model used for design of a ground microwave data relay link is described. The link includes long runs of waveguide for which simulated high-speed data distortion is experimentally verified.

Jones, S. C.↗

Power conversion distribution system using a resonant high-frequency AC link

Static power conversion systems based on a resonant high frequency (HF) link offers a significant reduction in the size and weight of the equipment over that achieved with conventional approaches, especially when multiple sources and loads are to be integrated. A faster system response and absence of audible noise are the other principal characteristics of such systems. A conversion configuration based on a HF link which is suitable for applications requiring distributed power is proposed.

Sood, P. K.↗

The northern Utah satellite (NUSAT) communications link

During the planning Stages of the NUSAT satellite, an obvious issue to be discussed was the method of communications to be used. The frequencies would have to be high enough to pass through the atmosphere relatively unattenuated but low enough that antennas and transmission lines would not be so critical in length and properties that unexperienced students would have difficulty with handling them. In conversations with the Federal Communications Commission (FCC) in Washington D.C., the frequencies of 450.000 MHz and 137.900 MHz were decided upon and applied for licensing. The 450.000 MHt up-link is used on a "non-interference" basis to control the satellite while the 137.900 MHz frequency down-links data from the satellite. A reasonable amount of time was spent discussing the mods of transmission to be used in communication with the satellite. Representatives of the amateur radio satellite organization, AMSAT, were contacted for ides. This organization seems to favor AM types of emissions such as CW to control their OSCAR series of satellites and also the current Phase 111 unit. NUSAT personnel felt, however, that there would be merit in the improved signal to noise ratio usually obtained in an FM mode. Doppler shift of the transmitted information on the NUSAT also had to be considered. The final decision WBS to use Audio Frequency Shift Keying (AFSK) modulated on an FM carrier. In this mode the audio tones used would not shift frequency with Doppler - only the carrier would shift in frequency. If necessary, the receivers could be fitted with a form of AFC control or simply have enough bandwidth to handle the Doppler shift with an acceptable increase in noise.

Lee Barrett↗

The 60 GHz antenna system analyses for intersatellite links, phase B

The purpose of this study is first to investigate, classify, and compare applicable antenna systems capable of establishing and maintaining intersatellite links at 60 GHz and secondly to select the most applicable system for a detailed conceptual design. The results are to be applicable to the development of intersatellite links at 60 GHz for future programs. Design goals are listed.

Source record↗

Making Linked, Wound-Filament Bands

Chains produced by use of rotating mandrel. Mandrel and locating and driving disks assembled around first band. Mandrel and band then mounted in respective positions on filament-winding machine. Second band linked to first by winding filament around first band on rotating mandrel. Short chains made this way have variety of uses; example, thermal isolators, each consisting of two linked bands of insulating material, used to support two separated insulating sheilds surrounding container of liquid helium.

Bamford, Robert M.↗

A Ka-band (32 GHz) beacon link experiment (KABLE) with Mars Observer

A proposal for a Ka-Band (32 GHz) Link Experiment (KABLE) with the Mars Observer mission was submitted to NASA. The experiment will rely on the fourth harmonic of the spacecraft X-band transmitter to generate a 33.6 GHz signal. The experiment will rely also on the Deep Space Network (DSN) receiving station equipped to simultaneously receive X- and Ka-band signals. The experiment will accurately measure the spacecraft-to-Earth telecommunication link performance at Ka-band and X-band (8.4 GHz).

Riley, A. L.↗