Search NASA⌕ Search

SEARCH · Search NASA

Results for “low viscosity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hydrothermal liquefaction of wastewater-grown algae to produce synthetic aviation fuel: A combined experimental study and techno-economic assessment

Large-scale algae farms may someday become a consistent source of biomass feedstock for biofuels. Near-term supplies of algal biomass are available at certain water resource recovery facilities as algae cultivation is used as a method for nutrient recovery from specific effluent streams. Algae grown as a service shifts the value to the service rather than its sole use as a feedstock, which could enable the provision of algal biomass at low to no cost to biofuel producers. Hydrothermal liquefaction (HTL) can readily upgrade wet feedstock slurries, such as algae, to produce a carbon-enriched biocrude. The HTL biocrude can be hydrotreated and distilled, producing a variety of distillate fuels, including synthetic aviation fuel (SAF). We present a pathway, showing the experimental production of SAF from wastewater-grown algae via HTL, along with a techno-economic assessment to identify opportunities for process improvements. Critical quality attributes of the SAF, such as density, viscosity, surface tension, and freeze point, were estimated within the expected fuel experience ranges when compared against petroleum jet fuel. The average minimum fuel selling price of fuels from wastewater-grown algae for breakeven economics was $\$9.04$ per gasoline gallon equivalent (GGE). The sale of co-products such as struvite fertilizers and cement additives can add revenue to reduce the net cost. Ultimately, the selling price is influenced by the scale of the HTL processing facility. Adjusting estimations in the process scale, algae yield, and capital cost estimation can lower the price to $\$6.51$/GGE or raise it to $13.07/GGE.

Biofuels↗
DOE OSTI2023

Nozzle Shocks, Disk Tearing, and Streamers Drive Rapid Accretion in 3D GRMHD Simulations of Warped Thin Disks

The angular momentum of gas feeding a black hole (BH) may be misaligned with respect to the BH spin, resulting in a tilted accretion disk. Rotation of the BH drags the surrounding spacetime, manifesting as Lense–Thirring torques that lead to disk precession and warping. We study these processes by simulating a thin (H/r = 0.02), highly tilted ($\tau$ = 65°) accretion disk around a rapidly rotating (a = 0.9375) BH at extremely high resolutions, which we performed using the general-relativistic magnetohydrodynamic code H-AMR. The disk becomes significantly warped and continuously tears into two individually precessing subdisks. We find that mass accretion rates far exceed the standard α-viscosity expectations. We identify two novel dissipation mechanisms specific to warped disks that are the main drivers of accretion, distinct from the local turbulent stresses that are usually thought to drive accretion. In particular, we identify extreme scale height oscillations that occur twice an orbit throughout our disk. When the scale height compresses, "nozzle" shocks form, dissipating orbital energy and driving accretion. Separate from this phenomenon, there is also extreme dissipation at the location of the tear. This leads to the formation of low-angular momentum "streamers" that rain down onto the inner subdisk, shocking it. The addition of low-angular momentum gas to the inner subdisk causes it to rapidly accrete, even when it is transiently aligned with the BH spin and thus unwarped. These mechanisms, if general, significantly modify the standard accretion paradigm. Additionally, they may drive structural changes on much shorter timescales than expected in α-disks, potentially explaining some of the extreme variability observed in active galactic nuclei.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Madison plasma dynamo experiment: A facility for studying laboratory plasma astrophysics

The Madison plasma dynamo experiment (MPDX) is a novel, versatile, basic plasma research device designed to investigate flow driven magnetohydrodynamic instabilities and other high-β phenomena with astrophysically relevant parameters. A 3 m diameter vacuum vessel is lined with 36 rings of alternately oriented 4000 G samarium cobalt magnets, which create an axisymmetric multicusp that contains ∼14 m3of nearly magnetic field free plasma that is well confined and highly ionized (>50%). At present, 8 lanthanum hexaboride (LaB6) cathodes and 10 molybdenum anodes are inserted into the vessel and biased up to 500 V, drawing 40 A each cathode, ionizing a low pressure Ar or He fill gas and heating it. Up to 100 kW of electron cyclotron heating power is planned for additional electron heating. The LaB6cathodes are positioned in the magnetized edge to drive toroidal rotation through J × B torques that propagate into the unmagnetized core plasma. Dynamo studies on MPDX require a high magnetic Reynolds number Rm > 1000, and an adjustable fluid Reynolds number 10 1). Initial results from MPDX are presented along with a 0-dimensional power and particle balance model to predict the viscosity and resistivity to achieve dynamo action.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Surfactant Effects on Carbon Black Slurries for Aqueous Flow-Electrode Applications

Aqueous carbon black (CB) slurries are promising for flow-electrode applications due to their low cost and high electrical conductivity. Here, in this study, we investigate the impact of introducing a nonionic surfactant (Tween 20) on the rheological and electrical properties of 5 wt % Vulcan XC72R CB slurries in a 50 mM NaCl aqueous solution. We observe a Tween 20 critical concentration around 1.2 wt % that triggers an abrupt transition from a conductive gel to a high-resistance Newtonian fluid. This sudden network collapse coincides with a 250-fold reduction in settled mass, a 1–2 order of magnitude drop in viscosity, and a nearly 100-fold decrease in slurry conductivity. Centrifuged pellet conductivity measurements support the conclusion that this performance loss is largely due to the destruction of the gel network, rather than increased particle-to-particle resistance. SEM imaging suggests that the network is built from large 10 to 50 μm agglomerates that are fully dissolved above the critical surfactant concentration. We found that subcritical surfactant addition improved slurry shelf stability over 90 days, but that electrochemical cell testing revealed progressive performance degradation during operation. These results highlight the need for strategies that maximize long-term electrical conductivity without compromising viscosity, sedimentation stability, or resistance to accumulation on internal surfaces.

Materials science↗
DOE OSTI2022

Progress Towards Extended Cycle Life Si-based Anodes: Investigation of Fluorinated Local High Concentration Electrolytes

Silicon (Si) anodes are promising candidates for Li-ion batteries due to their high specific capacity and low operating potential. Implementation has been challenged by the significant Si volume changes during (de)lithiation and associated growth/regrowth of the solid electrolyte interphase (SEI). In this report, fluorinated local high concentration electrolytes (FLHCEs) were designed such that each component of the electrolyte (solvent, salt, diluent) is fluorinated to modify the chemistry and stabilize the SEI of high (30%) silicon content anodes. FLHCEs were formulated to probe the electrolyte salt concentration and ratio of the fluorinated carbonate solvents to a hydrofluoroether diluent. Higher salt concentrations led to higher viscosities, conductivities, and contact angles on polyethylene separators. Electrochemical cycling of Si-graphite/NMC622 pouch cells using the FLHCEs delivered up to 67% capacity retention after 100 cycles at a C/3 rate. Post-cycling X-ray photoelectron spectroscopy (XPS) analyses of the Si-graphite anodes indicated the FLHCEs formed a LiF rich solid electrolyte interphase (SEI). The findings show that the fluorinated local high concentration electrolytes contribute to stabilizing the Si-graphite electrode over extended cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cost-effective, Thin-film SOFCs for Reliable Power Generation (Final Report)

The project was aimed at developing and demonstrating an advanced solid-oxide fuel cell (SOFC) technology to cost-effectively and reliably generate electricity directly from hydrocarbon fuels (e.g., natural gas and coal-derived syngas) for distributed and central generation applications. The studied technology was built on a planar, porous metal-supported SOFC (MS-SOFC) with a unique thin-film structure having its anode intimately supported on a metal substrate. The porous metal support with graded porosity was fabricated from a low-cost scalable phase-inversion tape casting method. Anode, thin-film electrolyte, and cathode were sequentially deposited on the porous metal substrate using atmospheric plasma spray (APS). In this study, it was shown that the composition of the casting slurry could significantly influence the morphology of the metal support fabricated using the phase-inversion tape-casting method. Increasing the solid loading in the slurry favored the formation and growth of finger-like pores to a point, but the presence of excessive solid loading increased the viscosity of the casting slurry, restraining the growth of finger-like pores. With the increase in the amount of the binder polyethersulfone (PESf) in the slurry, well grown finger-like pores and a thin sponge-like layer were formed. Since the parameters of the APS process have a significant effect on the microstructure of coatings, which in turn affects or determines the SOFC cell performance, a series of metal-supported solid oxide fuel cells with a four-layer cell configuration of 430L/Ni-ScSZ/ScSZ/LSCF have been fabricated by a combination of phase inversion tape casting and APS techniques. Electrochemical testing of the cells fabricated from different deposition APS conditions revealed significant differences in cell performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Computational Fluid Dynamics Simulations of Glass Vitrification Refractory Coupon Tests

The Waste Treatment and Immobilization Plant (WTP) at the Hanford site is nearing the start of the Direct-Feed Low-Activity Waste (DFLAW) operations. DFLAW is destined to convert a pretreated low activity waste portion of the 56 million gallons of tank waste into a stable solid glass. In the subsequent decade completion of the high-level waste (HLW) facility is anticipated. Sustained operational missions of both LAW and HLW melter facilities are expected over multiple decades. In high-temperature glass melters, the refractory lining corrodes over time, which could potentially be an issue for longer term operations, this refractory corrosion is higher at the level of the glass-air interface due to surface tension driven flow. The glass viscosity, melt pool temperature, and glass chemical composition can impact the rate at which the refractory corrodes. This rate is important to quantify for the various waste glasses to be produced at the WTP since the integrity of the refractory should not be a limiting factor affecting the lifetime of the melter. To this end, a series of glasses representative of the first batches of waste glass produced by the WTP will be melted in small-scale crucibles with Monofrax® K-3 coupons inserted. The corrosion of the K-3 will be measured in the melt and at the meltline (or neckline). A model for the corrosion rate will be constructed and implemented into a previously developed framework for a computational fluid dynamics (CFD) model of the full-scale WTP. To assist with experimental design and validate the implementation of the model in the full-scale melter, CFD simulations of the small-scale crucible tests were performed. The bubbling that occurs in the small-scale crucible is initially validated here with a model that uses silicone oil at room temperature. The viscosity of the oil ranges from 1 to 100 Pa•s, which corresponds to operating glass pool temperatures near 1150 °C down to idling temperatures near 950 °C. The simulation results show good agreement with the bubble sizes that form during experiments. CFD modeling of the crucible setup was used to determine bubbling characteristics to match the range of near-wall velocities expected in the full-scale WTP. This study presents the initial CFD modeling results, corrosion testing plan, and some preliminary corrosion samples with an outline for the next steps for the development of the corrosion model.

Abboud, Alexander W. [Idaho National Lab]↗
DOE OSTI2020

Closure Learning for Nonlinear Model Reduction Using Deep Residual Neural Network

Developing accurate, efficient, and robust closure models is essential in the construction of reduced order models (ROMs) for realistic nonlinear systems, which generally require drastic ROM mode truncations. We propose a deep residual neural network (ResNet) closure learning framework for ROMs of nonlinear systems. The novel ResNet-ROM framework consists of two steps: (i) In the first step, we use ROM projection to filter the given nonlinear system and construct a spatially filtered ROM. This filtered ROM is low-dimensional, but is not closed. (ii) In the second step, we use ResNet to close the filtered ROM, i.e., to model the interaction between the resolved and unresolved ROM modes. We emphasize that in the new ResNet-ROM framework, data is used only to complement classical physical modeling (i.e., only in the closure modeling component), not to completely replace it. We also note that the new ResNet-ROM is built on general ideas of spatial filtering and deep learning and is independent of (restrictive) phenomenological arguments, e.g., of eddy viscosity type. The numerical experiments for the 1D Burgers equation show that the ResNet-ROM is significantly more accurate than the standard projection ROM. The new ResNet-ROM is also more accurate and significantly more efficient than other modern ROM closure models.

Xie, Xuping↗
DOE OSTI2020

Low-dissipation centred schemes for hyperbolic equations in conservative and non-conservative form

We propose a one-parameter family of low-dissipation centred numerical schemes for solving hyperbolic equations in conservative or non-conservative form, using finite volume or discontinuous Galerkin finite element methods. The new schemes spring out from the multi-dimensional FORCE method and are determined by a single parameter α ≥ 1. Given an increasing sequence of real numbers 1 ≤ α 1 < α 2 < . . . < α K , there corresponds a sequence of numerical schemes with stability restriction associated to a decreasing sequence of Courant numbers 1 > c 1 > c 2 > . . . > c K > 0 and a decreasing sequence of corresponding numerical viscosity functions d 1 > d 2 > . . . > d K . For a given Courant number c k ≤ 1 there is a real number α k > 0 and a corresponding stable scheme with minimal numerical viscosity d k . The proposed schemes suit very well the family of high-order discontinuous Galerkin finite element methods and the recently proposed class of ADER-TR schemes, whose orders of accuracy define decreasing sequences of Courant numbers, as the order of accuracy increases. The centred methods of this paper are stable in 2D and 3D in the frame of simultaneous updating formulae, unlike other centred methods, such as 1D FORCE, which are not. Furthermore, the schemes are highly accurate for slowly-moving waves, which is precisely the kind of waves that traditional centred methods smear disastrously. Additional features of the proposed schemes include ease of implementation and applicability to any hyperbolic system either in conservative or non-conservative form. Here, the proposed schemes are analysed and computationally assessed through a suite of test problems for a linear model system, for the Euler equations in one and two space dimensions, and for the Baer-Nunziato equations for compressible two-phase flow.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

SAM-ML: Integrating data-driven closure with nuclear system code SAM for improved modeling capability

Advanced reactors often involve complicated thermal-fluid (T-F) phenomena. Modeling such phenomena with the traditional one-dimensional (1-D) system code is a challenging task. The System Analysis Module (SAM), a modern nuclear system code, has developed a coarse mesh multi-dimensional (multi-D) flow model to capture the spatial effect of T-F phenomena in advanced reactors. As a coarse mesh solver, constitutive relations are required for SAM's multi-D model for unresolved fine-scale physics, such as turbulence. Here this work presents a novel approach that integrates neural networks as data-driven closure for SAM's multi-D flow model. The data-driven closure is trained with fine-resolution data to ensure its accuracy while maintaining a coarse mesh setup to ensure its efficiency and consistency with SAM. We demonstrate the applicability of this SAM-ML capability in an open volume thermal stratification problem, where a neural network model serves as the eddy viscosity closure. A customized interface between the neural network and SAM is developed to ensure flexible and efficient data exchange. The SAM-ML results demonstrate superior performance compared to SAM's built-in zero-equation eddy viscosity closure. The case study shows that although the generalization capability of the data-driven closure still needs to be improved for different transient case or different geometric setup, SAM -ML demonstrates good potential for challenging simulation problems with improved accuracy and computational efficiency.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Influence of anomalous perpendicular transport on linear tearing mode dynamics in tokamak plasmas

The analysis of a previous paper [A. Cole and R. Fitzpatrick, Phys. Plasmas 13, 032503 (2006)] that maps out all of the two-fluid response regimes of a linear tearing layer interacting with an externally generated resonant magnetic perturbation, in a large aspect-ratio tokamak plasma, is generalized to take into account realistic levels of perpendicular particle transport. A new response-regime map is obtained that differs substantially, in many respects, from the old one. The improved analysis is first employed to find all of the two-fluid growth-rate regimes of a non-interacting low-mode-number tearing mode in a large aspect-ratio tokamak plasma. The analysis is then used to determine the scaling of the error-field penetration threshold with machine parameters in large aspect-ratio tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Unique Bacterial Pelletized Cultivation Platform in Rhodococcus opacus PD630 Enhanced Lipid Productivity and Simplified Harvest for Lignin Bioconversion

Pelletized liquid cultivation has been widely explored because of its advantages in biomanufacturing, such as easier biomass harvesting, higher product yield, and lower medium viscosity and energy consumption. In this study, we discovered that the nonfilamentous bacterium Rhodococcus opacus PD630 could form pellets during the fermentation of alkaline pretreatment liquor containing lignin as a carbon source. This discovery advanced our understanding of bacterium pelletization, as only filamentous fungi and filamentous bacteria were reported to form pellets without the addition of external agents such as flocculants or polymers in previous research. Several factors were investigated to understand how they affect the process of pelletization. Notably, the lipid content in the pellets was much higher than in the scattered bacteria at low nitrogen concentration (<0.5 g/L), under which condition (high carbon to nitrogen ratio) the industrial microbial production for lipids was carried out. Moreover, the highest pellet percentage (~60% of the total biomass) was observed at 30 g/L soluble solid content, an agitation rate of 180 rpm, 1.4 g/L NH 4 NO 3 , an initial optical density (OD 600 ) of 10, and a centrifugation speed of 6000 rpm. Further, the study also opens new avenues to decrease harvesting and cultivation cost as well as energy consumption for microbial fermentation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Lithium Divertor Targets and Walls for the ASTER Liquid Stellarator Reactor, Distributed Divertor

Stellarators may have advantages for certain liquid metal options as Plasma Facing Components (PFC) for divertor targets and first walls due to the wide range of possible magnetic configurations, which additionally are free of disruptions and fast field variations. In a previous work (V. Queral et al., IEEE Trans. Plasma Sci. 52, 2024), a concept of stellarator reactor (ASTER-CP) based on swirling Li-molten salts and liquid lithium floating on the molten salt as PFC was presented. The divertor matters were not studied then and, thus, they are being studied and experimentally tested now. The ASTER-CP reactor concept, the initial liquid metal experiments and potential concepts for the ASTER-CP divertor and first wall are reported. Concerning the experiments, several small scale experiments of galinstan in a small rotating cylinder under magnetic field have been produced, including one experiment with high viscosity galinstan-mixture for increased thickness of layer. An experiment of floating lithium on the molten salt LiCl-PbCl2 gave fast volatilization/decomposition of the molten salt. Particularly for divertors, the traditional free-flow, Capillary Porous Systems and ‘divertorlets’ have been studied for application to ASTER-CP. Surface waves (hot spots), lack of enough surface fluid turbulence and excessive fluid speed are the main issues found in fast free-flow. The perhaps original concept of Distributed Divertor and Equi-power Surface is tentatively proposed and studied, taking advantage of stellarator fields and low recycling regime.

distributed divertor↗
DOE OSTI2024

Low-Temperature Characterization of a Nonaqueous Liquid Electrolyte for Lithium Batteries

Rechargeable batteries exhibit poor performance at low temperatures due to sluggish ion transport through the electrolytic phase. Ion transport is governed by three transport parameters—conductivity, diffusion coefficient, and the cation transference number with respect to the solvent velocity—and the thermodynamic factor. Understanding how these parameters change with temperature is necessary for designing improved electrolytes. In this work, we combine electrochemical techniques with electrophoretic NMR to determine the temperature dependence of these parameters for a liquid electrolyte, LiTFSI salt dissolved in tetraglyme between −20 and 45 °C. At colder temperatures, all species in the electrolyte tend to move more slowly due to increasing viscosity, which translates to a monotonic decrease in conductivity and diffusion coefficient with decreasing temperature. Surprisingly, we find that the field-induced velocity of solvent molecules at a particular salt concentration is a nonmonotonic function of temperature. The cation transference number with respect to the solvent velocity thus exhibits a complex dependence on temperature and salt concentration. The measured thermodynamic and transport properties are used to predict concentration gradients that will form in a lithium-lithium symmetric cell under a constant applied potential as a function of temperature using concentrated solution theory. The calculated steady current at −20 °C is lower than that at 45 °C by roughly two orders of magnitude.

25 ENERGY STORAGE↗
DOE OSTI2023

Simulations of biomass compression-screw feeding using a compressible non-Newtonian constitutive model

There is global interest in the conversion of biomass into sustainable low-carbon-footprint fuels and chemicals as an alternative to non-renewable fossil feedstocks. Feeding biomass solids into pressurized reactors is one of the key steps in biomass conversion. Predicting mechanical failure and energy requirements for this step helps avoid upstream processing bottlenecks and enables efficient operation of a biorefinery. Here, in this work, we developed a predictive computational model for biomass screw feeders that capture the highly viscous, non-Newtonian and compressible behavior of biomass slurries. Biomass compressible behavior is formulated by an equation of state and the non-Newtonian rheology is represented by a density-dependent viscosity model. Experimental data from two compression screw-feeder systems are presented as a validation for our model. Our model successfully predicted the location of the compressed biomass “plug”, biomass flow rate, and the required torque at different operating conditions for the experimental conditions studied in this work.

09 BIOMASS FUELS↗
DOE OSTI2025

Mechanically Accelerated Depolymerization of Entangled Linear Polymer Melts

Mechanical forces can enhance the chemical depolymerization of synthetic polymers when shear flow accelerates chain scission. To quantify the extent of mechanically-accelerated scission, the effect of simple shear flow (duration and strength) with low Weissenberg and Deborah numbers was investigated by considering the impact of applied work in both simple shear and shear dominated mixed flows. Hydrogenated polyisoprene was chosen as a model linear, entangled system. The conditions (strain amplitude, frequency, and shearing time) necessary to increase chain scission were assessed in the rubbery melt. Shear flow accelerated chain scission at higher temperatures, suggesting an activated process. Isothermal scission versus work curves were superposed by applying shift factors a T,S , whose Arrhenius-like temperature dependence gave an apparent activation energy for chain scission of ~ 110 kJ/mol, which is likely a combination of the activation energy of viscosity and bond energy. This work provides a base for quantifying the impact of shear on depolymerization of polymer melts and highlight the connection between viscous dissipation and scission chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Heavy Oil Polymer EOR in the Challenging Alaskan Arctic - It Works!

Under co-sponsorship of the US Department of Energy and Hilcorp Alaska LLC the first ever polymer field pilot commenced on 8/28/2018 in the Schrader Bluff heavy oil reservoir at the Milne Point Field on Alaska North Slope (ANS). The primary objective of the pilot is to prove the efficacy of polymer Enhanced Oil Recovery (EOR) to unlock the vast heavy oil resources on ANS. More than two and half years after startup, the polymer injection, supporting laboratory experiments and simulation studies steadily continue. The pilot started injecting hydrolyzed polyacrylamide (HPAM), at a concentration of 1,750 ppm to achieve a target viscosity of 45 cP, into the two horizontal injectors in the flood pattern. Production is monitored in the two horizontal producers. Based on laboratory measurements of polymer viscosity at reservoir conditions, the team decided to reduce polymer concentration to 1,200 ppm since July 2020 in an effort to control injection pressure and optimize polymer utilization. Quality control (QC) on the field ensures uniform polymer solution properties. Representative rock and fluid systems and test conditions are utilized in the corefloods on polymer retention, effect of injection water salinity, polymer loading, and their combinations on oil recovery. A history matched reservoir simulation model for forecasting oil recovery was developed on the basis of all the available field data. Field concerns related to the post-polymer breakthrough impact on flow assurance is addressed via specialized laboratory tests. Notwithstanding early operational disruptions and hydration issues, continuous polymer injection in both injectors has been achieved. To date, 950,000 lbs of polymer or 2 million barrels of polymer solution, equating to 13% of total pore volume (PV), has been placed in the flood pattern, serving as an effective indicator of adequate polymer injectivity. So far, the success of polymer EOR is evident from drastically reduced water cut in the producers, an estimated incremental 1,000 bopd over waterflood, and a favorable polymer utilization of 1.7 lbs/barrel of incremental oil. Polymer breakthrough was observed 26 months after the start of polymer injection. Main observations from corefloods are unusually high polymer retention values in some cases and a positive response to low salinity water. Although the heterogeneity in the flood pattern and exceptionally low water cut pose some challenges, persistent novel and justifiable simulation approaches have resulted in a robust history matched model. Experimental results on produced fluids treatment provide operational guidance for improved oil-water separation and mitigation of heater tube fouling. The ongoing success of the pilot is a key indicator of bringing the team ever closer to meeting the project’s primary objective. The encouraging results of the pilot is one of the drivers that has provided the impetus to apply polymer EOR throughout the Milne Point Field, which would increase oil recovery and extend the economic life of the Trans Alaska Pipeline System. The scientific knowledge, including the many lessons learned from this pilot also has referential value for other potential heavy oil EOR projects throughout the world. The collected data, operational lessons learned, and the overall success of the pilot are summarized in the paper.

None, None↗
DOE OSTI2024

Insights into the Assembly and Conformation of Nanoparticle Organic Hybrid Materials (NOHMs) in Solution with Varying Grafting Type

Recently, nanoparticle organic hybrid materials (NOHMs) have been considered promising electrolytes for energy storage applications due to their unique combination of properties, which include high thermal stability, negligible vapor pressure, and easy synthesis. However, the structural features of NOHMs in electrochemical systems are not well understood. Hence, we investigate the impact of grafting type (ionic vs covalent) on the structure and performance of NOHMs that consist of a silica core and grafted HPE polymer (Jeffamine M2070) in aqueous solution with and without the presence of the supporting electrolyte (0.1 M KHCO 3 ) using small-angle neutron scattering. Careful analyses of the results indicate that even at low grafting density (0.8 chains nm –2 ) and concentration (1–3 wt %), ionic NOHMs solutions contain a free polymer that may interact with the grafted polymer, altering the assembly of NOHMs in solution. Our investigation also elucidates that the covalent NOHM solutions consist of both aggregated and dispersed NOHMs in the solution. Moreover, the addition of the supporting electrolyte affects the assembly and structure of the polymer in the ionic NOHMs solution significantly, whereas only a slight change in the conformation of the grafted polymer is observed for covalent NOHMs. These conformational changes alter the performance of the NOHMs solution, resulting in a dramatic change in viscosity. Careful analysis shows that this significant alteration of solution viscosity in the ionic NOHMs can be traced back to the presence of the free polymer that interacts with the grafted layer and the attenuation of this interaction between the free and grafted polymers with the addition of salt. Furthermore, these studies elucidate the impact of grafting type on the overall structure, assembly, and performance of functionalized NOHMs in aqueous solution and explicitly correlate the structure and assembly of NOHMs to their transport properties and must be considered when designing functional systems that incorporate NOHMs.

25 ENERGY STORAGE↗