Search NASA⌕ Search

SEARCH · Search NASA

Results for “model selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Development of a Water Recovery System Resource Tracking Model

A simulation model has been developed to track water resources in an exploration vehicle using Regenerative Life Support (RLS) systems. The Resource Tracking Model (RTM) integrates the functions of all the vehicle components that affect the processing and recovery of water during simulated missions. The approach used in developing the RTM enables its use as part of a complete vehicle simulation for real time mission studies. Performance data for the components in the RTM is focused on water processing. The data provided to the model has been based on the most recent information available regarding the technology of the component. This paper will describe the process of defining the RLS system to be modeled, the way the modeling environment was selected, and how the model has been implemented. Results showing how the RLS components exchange water are provided in a set of test cases.

Chambliss, Joe↗
NASA NTRS1978

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

Mild steel (AISI 1018) was selected as model cold rolling material and Ti-6A1-4V and Inconel 718 were selected as typical hot rolling and cold rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape rolling process were developed. These models utilized the upper bound and the slab methods of analysis, and were capable of predicting the lateral spread, roll separating force, roll torque, and local stresses, strains and strain rates. This computer-aided design system was also capable of simulating the actual rolling process, and thereby designing the roll pass schedule in rolling of an airfoil or a similar shape.

Lahoti, G. D.↗
NASA NTRS1992

Model-driven mapping onto distributed memory parallel computers

The author addresses the problem of exploiting the parallelism available in a program to efficiently employ the resources of the target machine in the context of building a mapping compiler for a distributed memory parallel machine. He demonstrates the effectiveness of using execution models to select the best mapping technique from among those available for a given program segment on a particular machine. Through analysis of the execution models for several mapping techniques for one class of programs on a linear processor array, it is shown that selecting the best technique for a particular program instance can make a significant difference in performance. On the other hand, the results of benchmarks from a mapping compiler for the Warp systolic array machine show that the execution models considered are accurate enough to select the best mapping technique for a given program.

Sussman, Alan↗
NASA NTRS1997

Turbulence Modeling Validation, Testing, and Development

The primary objective of this work is to provide accurate numerical solutions for selected flow fields and to compare and evaluate the performance of selected turbulence models with experimental results. Four popular turbulence models have been tested and validated against experimental data often turbulent flows. The models are: (1) the two-equation k-epsilon model of Wilcox, (2) the two-equation k-epsilon model of Launder and Sharma, (3) the two-equation k-omega/k-epsilon SST model of Menter, and (4) the one-equation model of Spalart and Allmaras. The flows investigated are five free shear flows consisting of a mixing layer, a round jet, a plane jet, a plane wake, and a compressible mixing layer; and five boundary layer flows consisting of an incompressible flat plate, a Mach 5 adiabatic flat plate, a separated boundary layer, an axisymmetric shock-wave/boundary layer interaction, and an RAE 2822 transonic airfoil. The experimental data for these flows are well established and have been extensively used in model developments. The results are shown in the following four sections: Part A describes the equations of motion and boundary conditions; Part B describes the model equations, constants, parameters, boundary conditions, and numerical implementation; and Parts C and D describe the experimental data and the performance of the models in the free-shear flows and the boundary layer flows, respectively.

Bardina, J. E.↗
NASA NTRS1978

Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

Lahoti, G. D.↗
DOE OSTI2025

Leveraging Artificial Intelligence to Predict Novel Eutectic Alloys

The goal of this project was to train an artificial neural network (ANN) to predict the fractional composition and melting point of eutectic alloys using fundamental atomic properties as inputs. The fundamental properties considered include atomic number, atomic weight, atomic radius, valence electron concentration, electronegativity, and electron affinity. The project involved several phases, starting with data preparation, where phase diagram data was harvested from the ASM International database. Approximately 1300 binary eutectics were collected and cleaned to ensure relevance and accuracy. A regression model was selected for training, utilizing a rectified linear unit as the activation function. Various model configurations were evaluated for predictive accuracy, with validation techniques employed to ensure robustness. The model demonstrated predictive capabilities above random guessing and was able to achieve up to 11% accuracy under certain conditions. An ablative test identified atomic radius and valence electron concentration as critical inputs for model performance. Incorporating the melting point of atomic constituents improved accuracy significantly, although ultimately the model’s predictive capability still fell short of the 80% target. This report details the methodology, results, and implications of the research, contributing to the understanding of employing artificial intelligence to predict the phase transition behavior of eutectic alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1980

KU-Band rendezvous radar performance computer simulation model

The preparation of a real time computer simulation model of the KU band rendezvous radar to be integrated into the shuttle mission simulator (SMS), the shuttle engineering simulator (SES), and the shuttle avionics integration laboratory (SAIL) simulator is described. To meet crew training requirements a radar tracking performance model, and a target modeling method were developed. The parent simulation/radar simulation interface requirements, and the method selected to model target scattering properties, including an application of this method to the SPAS spacecraft are described. The radar search and acquisition mode performance model and the radar track mode signal processor model are examined and analyzed. The angle, angle rate, range, and range rate tracking loops are also discussed.

Griffin, J. W.↗
DOE OSTI2024

MFiX Development Updates

This presentation discusses recent developments of the Multiphase Flow with Interphase eXchanges (MFiX) software. A brief review of all modeling approaches along with their cost versus accuracy is provided to guide users when selecting a model for a given application. The main new features of the past five official releases of MFiX are described. Improvement in chemistry management allow for easier simulation setup, and faster simulation speed. Progress in the implementation of a thin-wall boundary condition is presented. The major new model development over the past year is the release of the Glued Sphere Particle model (GSP), where component spheres are combined together to represent non-spherical particles. The integration of Machine Learning (ML) workflow in the CFD process is discussed with two applications: a surrogate model for stiff chemistry and the development of a PIC stress model using ML.

Dietiker, Jeff↗
NASA NTRS2012

Urban Climate Station Site Selection Through Combined Digital Surface Model and Sun Angle Calculations

Meteorological measurements within urban areas are becoming increasingly important due to the accentuating effects of climate change upon the Urban Heat Island (UHI). However, ensuring that such measurements are representative of the local area is often difficult due to the diversity of the urban environment. The evaluation of sites is important for both new sites and for the relocation of established sites to ensure that long term changes in the meteorological and climatological conditions continue to be faithfully recorded. Site selection is traditionally carried out in the field using both local knowledge and visual inspection. This paper exploits and assesses the use of lidar-derived digital surface models (DSMs) to quantitatively aid the site selection process. This is acheived by combining the DSM with a solar model, first to generate spatial maps of sky view factors and sun-hour potential and second, to generate site-specific views of the horizon. The results show that such a technique is a useful first-step approach to identify key sites that may be further evaluated for the location of meteorological stations within urban areas.

digital surface model↗
NASA NTRS1973

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

Problems related to the design and control of a mobile planetary vehicle to implement a systematic plan for the exploration of Mars are reported. Problem areas include: vehicle configuration, control, dynamics, systems and propulsion; systems analysis, terrain modeling and path selection; and chemical analysis of specimens. These tasks are summarized: vehicle model design, mathematical model of vehicle dynamics, experimental vehicle dynamics, obstacle negotiation, electrochemical controls, remote control, collapsibility and deployment, construction of a wheel tester, wheel analysis, payload design, system design optimization, effect of design assumptions, accessory optimal design, on-board computer subsystem, laser range measurement, discrete obstacle detection, obstacle detection systems, terrain modeling, path selection system simulation and evaluation, gas chromatograph/mass spectrometer system concepts, and chromatograph model evaluation and improvement.

Frederick, D. K.↗
DOE OSTI2025

Large language models for batteries

Large Language Models (LLMs) are advanced artificial intelligence systems capable of solving diverse tasks using language, reasoning, and external tools. Despite their growing deployment in academia and industry, their potential remains underexplored in battery research. This review presents a comprehensive overview of existing and emerging applications of LLMs in batterie field, addressing two critical questions: What can LLMs offer to support battery-related tasks, and how to develop more effective models for this purpose. We begin by outlining the principles of LLMs and criteria for selecting appropriate models and tools for battery research and development. We then explore their roles in text-mining, data interpretation, and the development of intelligent battery systems. In parallel, we discuss technical challenges, such as data standardizing and sharing, model evaluation, and tool integration. Lastly, we propose future research directions with short-, medium-, and long-term goals and highlight more broad perspectives for connecting experts and cross-disciplinary collaborations.

SoC↗
NASA NTRS1980

Loss model for off-design performance analysis of radial turbines with pivoting-vane, variable-area stators

An off-design performance loss model for a radial turbine with pivoting, variable-area stators is developed through a combination of analytical modeling and experimental data analysis. A viscous loss model is used for the variation in stator loss with setting angle, and stator vane end-clearance leakage effects are predicted by a clearance flow model. The variation of rotor loss coefficient with stator setting angle is obtained by means of an analytical matching of experimental data for a rotor that was tested with six stators, having throat areas from 20 to 144% of the design area. An incidence loss model is selected to obtain best agreement with experimental data. The stator vane end-clearance leakage model predicts increasing mass flow and decreasing efficiency as a result of end-clearances, with changes becoming significantly larger with decreasing stator area.

Meitner, P. L.↗
NASA NTRS1991

A signal model for GPS

As the development of GPS continues, there will be an increasing need for a software-centered signal model. This model must accurately generate the observed pseudorange that would typically be encountered. The observed pseudorange varies from the true geometric range because of range measurement errors, which stem from a variety of hardware and environmental factors. In this paper, these errors are classified as either deterministic or random, and, where appropriate, their models are summarized. Of particular interest is the model for Selective Availability, which was derived from actual GPS data. The procedure for determination of this model, known as system identification theory, is briefly outlined. The synthesis of these error sources into the final signal model is given, along with simulation results.

Braasch, Michael S.↗
NASA NTRS1999

A System for Integrated Reliability and Safety Analyses

We present an integrated reliability and aviation safety analysis tool. The reliability models for selected infrastructure components of the air traffic control system are described. The results of this model are used to evaluate the likelihood of seeing outcomes predicted by simulations with failures injected. We discuss the design of the simulation model, and the user interface to the integrated toolset.

Kostiuk, Peter↗
DOE OSTI2025

Entropy-based feature selection for capturing impacts in Earth system models with abrupt forcing

This paper presents the development of a new entropy-based feature selection method for identifying and quantifying impacts. Here, impacts are defined as statistically significant differences in spatio-temporal fields when comparing datasets with and without an external forcing in an Earth system model. Temporal feature selection is performed by first computing the cross-fuzzy entropy to quantify similarity of patterns between two datasets and then applying changepoint detection to identify regions of statistically constant entropy. The method is used to capture temperate north surface cooling from a 9-member simulation ensemble of the Mt. Pinatubo volcanic eruption, which injected 10 Tg of SO 2 into the stratosphere. The results estimate a mean difference decrease in near surface air temperature of -0.560 K with a 99% confidence interval between -0.864 K and -0.257 K between April and November of 1992, one year following the eruption. A sensitivity analysis with decreasing SO 2 injection revealed that the impact is statistically significant at 5 Tg but not at 3 Tg. Using identified features, a dependency graph model based on a 9-day lag had significantly fewer nodes than a graph based on monthly means. Furthermore, this demonstrates our method’s ability to perform dimension reduction while still uncovering source-to-impact pathways.

Changepoint detection↗
NASA NTRS1993

Component Selection, Accelerated Testing, and Improved Modeling of AMTEC Systems for Space Power (abstract)

Alkali metal thermal to electric converter (AMTEC) designs for space power are numerous, but selection of materials for construction of long-lived AMTEC devices has been limited to electrodes, current collectors, and the solid electrolyte. AMTEC devices with lifetimes greater than 5 years require careful selection and life testing of all hot-side components. The likely selection of a remote condensed design for initial flight test and probable use with a GPHS in AMTEC powered outer planet probes requires the device to be constructed to tolerate T greater than 1150K, as well as exposure to Na(sub (g)), and Na(sub (liq)) on the high pressure side. The temperatures involved make critical high strength and chemical resistance to Na containing Na(sub 2)O. Selection among materials which can be worked should not be driven by ease of fabricability, as high temperature stability is the critical issue. These concepts drive the selection of Mo alloys for Na(sub (liq)) containment in AMTEC cells for T to 1150K operation, as they are significantly stronger than comparable NB or Ta alloys, are less soluble in Na(sub (liq)) containing dissolved Na(sub 2)O, are workable compared to W alloys (which might be used for certain components), and are ductile at the T greater than 500K of proposed AMTEC modules in space applications.

AMTEC thermal to electric conversion↗
NASA NTRS1993

Component Selection, Accelerated Testing, and Improved Modeling of AMTEC Systems for Space Power

Alkali metal thermal to electric converter (AMTEC) designs for space power are numerous, but the selection of materials for construction of long-lived AMTEC devices has been limited to electrodes, current collectors, and the solid electrolyte. AMTEC devices with lifetimes greater than 5 years require careful selection and life testing of all hot-side components. The likely selection of a remote condensed design for initial flight test and probable use with a radioisotope heat source in AMTEC powered planet probes requires the device to be constructed to tolerate operating T greater than 1150K, as well as exposure to Na (g) , and Na (liq) on the high pressure side. The temperatures involved make the characterization of high strength and chemical resistance to Na containing Na 2 O critical. Selection among materials which can be worked should not be driven by ease of fabricablity, as high temperature stability is the critical issue. These concepts drive the selecton of Mo alloys for Na (liq) containment in AMTEC cells for T to 1150K operation, as they are significantly stronger than comparable Nb or Ta alloys, are less soluble in Na (liq) containing dissolved Na 2 O, are workable compared with W alloys (which might be used for certain components), and are ductile at the T greater than 500K of proposed AMTEC modules in space applications.

AMTEC↗
NASA NTRS1983

A preliminary damage tolerance methodology for composite structures

The certification experience for the primary, safety-of-flight composite structure applications on the F-16 is discussed. The rationale for the selection of delamination as the major issue for damage tolerance is discussed, as well as the modeling approach selected. The development of the necessary coupon-level data base is briefly summarized. The major emphasis is on the description of a full-scale fatigue test where delamination growth was obtained to demonstrate the validity of the selected approach. A summary is used to review the generic features of the methodology.

Wilkins, D. J.↗