Search NASA⌕ Search

SEARCH · Search NASA

Results for “optimality analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Finite Element Based HWB Centerbody Structural Optimization and Weight Prediction

This paper describes a scalable structural model suitable for Hybrid Wing Body (HWB) centerbody analysis and optimization. The geometry of the centerbody and primary wing structure is based on a Vehicle Sketch Pad (VSP) surface model of the aircraft and a FLOPS compatible parameterization of the centerbody. Structural analysis, optimization, and weight calculation are based on a Nastran finite element model of the primary HWB structural components, featuring centerbody, mid section, and outboard wing. Different centerbody designs like single bay or multi-bay options are analyzed and weight calculations are compared to current FLOPS results. For proper structural sizing and weight estimation, internal pressure and maneuver flight loads are applied. Results are presented for aerodynamic loads, deformations, and centerbody weight.

Gern, Frank H.↗
NASA NTRS1984

Aerospace engineering design by systematic decomposition and multilevel optimization

This paper describes a method for systematic analysis and optimization of large engineering systems, e.g., aircraft, by decomposition of a large task into a set of smaller, self-contained subtasks that can be solved concurrently. The subtasks may be arranged in many hierarchical levels with the assembled system at the top level. Analyses are carried out in each subtask using inputs received from other subtasks, and are followed by optimizations carried out from the bottom up. Each optimization at the lower levels is augmented by analysis of its sensitivity to the inputs received from other subtasks to account for the couplings among the subtasks in a formal manner. The analysis and optimization operations alternate iteratively until they converge to a system design whose performance is maximized with all constraints satisfied. The method, which is still under development, is tentatively validated by test cases in structural applications and an aircraft configuration optimization. It is pointed out that the method is intended to be compatible with the typical engineering organization and the modern technology of distributed computing.

Sobieszczanski-Sobieski, J.↗
DOE OSTI2024

Performance Analysis of an Optimization Algorithm for Metamaterial Design on the Integrated High-Performance Computing and Quantum Systems

Optimizing metamaterials with complex geometries is a big challenge. Although an active learning algorithm, combining machine learning (ML), quantum computing, and optical simulation, has emerged as an efficient optimization tool, it still faces difficulties in optimizing complex structures that have potentially high performance. In this work, we comprehensively analyze the performance of an optimization algorithm for metamaterial design on the integrated HPC and quantum systems. We demonstrate significant time advantages through message-passing interface (MPI) parallelization on the high-performance computing (HPC) system showing approximately 54% faster ML tasks and 67 times faster optical simulation against serial workloads. Furthermore, we analyze the performance of a quantum algorithm designed for optimization, which runs with various quantum simulators on a local computer or HPC-quantum system. Results showcase ~24 times speedup when executing the optimization algorithm on the HPC-quantum hybrid system. This study paves a way to optimize complex metamaterials using the integrated HPC-quantum system.

Kim, Seongmin↗
NASA NTRS1976

Analytical and experimental design and analysis of an optimal processor for image registration

The author has identified the following significant results. A quantitative measure of the registration processor accuracy in terms of the variance of the registration error was derived. With the appropriate assumptions, the variance was shown to be inversely proportional to the square of the effective bandwidth times the signal to noise ratio. The final expressions were presented to emphasize both the form and simplicity of their representation. In the situation where relative spatial distortions exist between images to be registered, expressions were derived for estimating the loss in output signal to noise ratio due to these spatial distortions. These results are in terms of a reduction factor.

Mcgillem, C. D.↗
NASA NTRS1986

Mission analysis flow sequencing optimization

This investigation is an extension of a project dealing with the problem of optimal use of ground resources for future space missions. This problem was formulated as a linear programming problem using an indirect approach. Instead of minimizing the inventory level of needed ground resources, the overlapping periods during which the same types of resources are used by various flights are minimized. The model was built upon the assumption that during the time interval under consideration, the costs of various needed resources remain constant. Under other assumptions concerning costs of resources, the objective function, in general, assumes a non-linear form. In this study, one case where the form of the objective function turns out to be quadratic is considered. Also, disadvantages and limitations of the approach used are briefly discussed.

Scott, M.↗
NASA NTRS1987

Performance analysis of an optimal file transfer protocol for integrated mobile satellite services

A file-transfer protocol based on the selective-repeat automatic-retransmission-request (ARQ) scheme has been developed for the Mobile Satellite Experiment (MSAT-X). In this protocol, each file is divided into packets, which are error-detected and acknowledge individually. A file can be transferred in either the open- or closed-end connection. In the open-end connection, the file is transmitted continuously according to the selective-repeat scheme until all packets are positively acknowledged; in the closed-end connection, each retransmission will initiate its own connection request. The relationship between the packet size and the average end-to-end delay in the mobile fading environment is investigated. The communications channel uses trellis-coded modulation with symbol interleaving, packet replication, and error detection. The packet error performance in such a channel is evaluated by simulation, and the optimal packet size for various operating conditions is derived, using the simulated results. It is shown that for a symbol-energy-to-noise ratio of 12 dB, each file should be divided into packets of length between 256 bits and 512 bits (excluding the overhead) to minimize the average end-to-end delay.

Wang, Charles C.↗
NASA NTRS1988

Linear statistical analysis of maneuver optimization techniques

It is shown how a method for maneuver design during the Jovian satellite tour phase of the Galileo mission requires a full-scale redesign of the tour at each maneuver. Software was developed to provide insight into the statistical properties of this process; it is based on the use of linear perturbations to provide trajectory propagation and a least squares representation of the optimization. The result is a Monte Carlo program, making it possible to evaluate the proposed strategy.

Maize, Earl H.↗
NASA NTRS1991

Spacecraft design optimization using Taguchi analysis

The quality engineering methods of Dr. Genichi Taguchi, employing design of experiments, are important statistical tools for designing high quality systems at reduced cost. The Taguchi method was utilized to study several simultaneous parameter level variations of a lunar aerobrake structure to arrive at the lightest weight configuration. Finite element analysis was used to analyze the unique experimental aerobrake configurations selected by Taguchi method. Important design parameters affecting weight and global buckling were identified and the lowest weight design configuration was selected.

Unal, Resit↗
NASA NTRS1991

Analysis of the optimal laminated target made up of discrete set of materials

A new class of problems was analyzed to estimate an optimal structure of laminated targets fabricated from the specified set of homogeneous materials. An approximate description of the perforation process is based on the model of radial hole extension. The problem is solved by using the needle-type variation technique. The desired optimization conditions and quantitative/qualitative estimations of optimal targets were obtained and are discussed using specific examples.

Aptukov, Valery N.↗
NASA NTRS1992

Aerodynamic shape optimization via sensitivity analysis on decomposed computational domains

Direct and iterative method considered to be most applicable to large systems of linear equations arising in discrete sensitivity analysis are assessed. Based on a single-domain grid, computations are performed using a banded matrix solver and an iterative solver, the generalized minimum residual (GMRES) method. The banded matrix solver is found to be generally the most economical method for those applications where the number of right-hand sides is large (i.e., a large number of design variables or a large number of adjoint vectors). For systems of equations that are too large to be solved by direct methods, an approach is proposed whereby the computational domain is divided into small subdomains, and each subdomain is solved separately.

Eleshaky, Mohamed E.↗
NASA NTRS1993

A new sensitivity analysis for structural optimization of composite rotor blades

This paper presents a detailed mathematical derivation of the sensitivity derivatives for the structural dynamic, aeroelastic stability and response characteristics of a rotor blade in hover and forward flight. The formulation is denoted by the term semianalytical approach, because certain derivatives have to be evaluated by a finite difference scheme. Using the present formulation, sensitivity derivatives for the structural dynamic and aeroelastic stability characteristics, were evaluated for both isotropic and composite rotor blades. Based on the results, useful conclusions are obtained regarding the relative merits of the semi-analytical approach, for calculating sensitivity derivatives, when compared to a pure finite difference approach.

Venkatesan, C.↗
NASA NTRS1993

The cost of model reference adaptive control - Analysis, experiments, and optimization

In this paper the performance of Model Reference Adaptive Control (MRAC) is studied in numerical simulations and verified experimentally with the objective of understanding how differences between the plant and the reference model affect the control effort. MRAC is applied analytically and experimentally to a single degree of freedom system and analytically to a MIMO system with controlled differences between the model and the plant. It is shown that the control effort is sensitive to differences between the plant and the reference model. The effects of increased damping in the reference model are considered, and it is shown that requiring the controller to provide increased damping actually decreases the required control effort when differences between the plant and reference model exist. This result is useful because one of the first attempts to counteract the increased control effort due to differences between the plant and reference model might be to require less damping, however, this would actually increase the control effort. Optimization of weighting matrices is shown to help reduce the increase in required control effort. However, it was found that eventually the optimization resulted in a design that required an extremely high sampling rate for successful realization.

Messer, R. S.↗