Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered growth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High dopant activation in arsenic doped single-crystal CdTe thin films: Insights from MBE growth and rapid thermal processing

Single-crystal model systems are valuable tools to investigate fundamental material properties. In this work, we use molecular beam epitaxy to deposit in situ arsenic (As) doped single-crystal CdTe films on large area Si substrates to better understand As doping for photovoltaic applications. We found that As incorporation is highly temperature dependent: a substrate temperature difference of 50 °C can lead to several orders of magnitude difference in As concentration. Cd overpressure during in situ doping may limit out-diffusion of As but decrease As incorporation, especially at lower growth temperatures. Carrier concentrations greater than 10 16 cm −3 can be achieved with or without Cd overpressure when annealed at temperatures above 500 °C. However, unlike the low (∼1% to 5%) dopant activation commonly observed in polycrystalline CdTe, our films achieve significantly higher activation ratios—exceeding 50%, and in some cases approaching 80%. These values are consistent with or exceed prior reports in single-crystal CdTe systems. In addition to as-deposited arsenic concentrations, we also consider arsenic distribution after different rapid thermal processing temperatures. We propose a detailed definition and description of how arsenic incorporation is considered and calculated. Due to carrier concentration saturation, As incorporation also needs to be controlled to average levels of 10 17 cm −3 to achieve high activation. These findings suggest that higher annealing temperature regimes may be beneficial to polycrystalline CdTe based PV devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Controlled synthesis and ordered assembly of Co 3 O 4 nanowires using genetically engineered bacterial flagella as biotemplates (Final Technical Report)

The major goals of the project are to gain a fundamental understanding on the influence of the displayed peptides and other processing parameters on the flagella assembly and the resulting biomimetic control over the synthesis and assembly of Co 3 O 4 nanoparticles (NPs) and nanowires (NWs). To pursue these goals, we designed two specific aims: Aim 1: Understanding the self-assembly of genetically engineered flagella and its outcome for site-specific nucleation and growth of Co 3 O 4 NPs and NWs. Aim 2: Understanding controllable alignment of 1D Co 3 O 4 -flagella NWs into highly ordered 2D and 3D structures.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Unveiling mechanism of surface-guided platinum nanowire growth

We report surface-guided growth of non-planar nanowires on functional substrates offers the new opportunity to precisely control their diameter, length, density and alignment, which will greatly benefit their direct integration into practical devices for large-scale applications. However, control of noble metal nanowires growth and arrangement remains a great challenge, and the mechanistic understanding is still limited. Herein, we choose Pt as a model material system to study the synthesis conditions required to control the in situ growth of aligned Pt nanowires on flat titanium substrate via a one-step and room-temperature green chemical synthesis process in aqueous solution. Most importantly, it is for the first time discovered that ordered nanoarrays and self-assembled nanoflowers can be directly grown on flat Ti substrate by merely adjusting the reaction times, without use of any soft/hard templates, surfactants and organic solvents. The proposed surface-guided growth mechanisms for nanoarray and nanoflower formation in this study may shed light on understanding of oriented arrangement/assembly of one-dimensional Pt nanowires into desirable morphologies for a variety of practical device applications.

Pt nanoflower↗
DOE OSTI2022

Experiments on the single-mode Richtmyer–Meshkov instability with reshock at high energy densities

Here, the hydrodynamic instability growth of a reshocked single-mode interface between high energy density fluids is studied. A laser-driven shock wave is used to drive an initially solid, sinusoidal interface between a dense plastic (1.43 g/cc) and a light foam (≈ 0.110 g/cc). After the interface has grown to a nonlinear state where the amplitude is of order of the wavelength, it is reshocked. The reshock compresses the nonlinear perturbation, which then grows at about twice the rate. While the pre-reshock growth rate is sensitive to the initial amplitude and wavelength of the perturbation, the post-reshock growth rate is comparatively insensitive to the initial condition. Qualitatively, we observe that the perturbations are less coherent after reshock, consistent with the idea that having a reshock accelerates the transition to turbulence. We find that some memory of the initial condition remains, even after reshock at late time: it appears if the initial perturbations have large enough wavelengths, and the flow structure of size comparable to the initial wavelength persists through reshock. Our results agree with design simulations and are consistent with the phenomenology of reshock studies in conventional gaseous shock tubes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

A custom 3D printed paddlewheel improves growth in flat panel photobioreactor

One of the main challenges with using flat panel photobioreactors for algal growth is uneven mixing and settling of cells in corners, especially when bubbling is the only method used for mixing. Here, in order to improve mixing in our flat panel reactor, we designed a custom paddlewheel. Paddlewheels are frequently used in outdoor algae raceway ponds to improve mixing and we are taking advantage of the same principle for mixing in the reactor. The paddlewheel is easily integrated into our PSI FMT150 1‐L flat panel photobioreactor and is printed on a 3D printer using high temperature poly lactic acid (HT‐PLA). With the inclusion of an annealing step, the paddlewheel is autoclavable. Addition of the paddlewheel in the reactor minimized cell settling and improved algal growth, as evidenced by a nearly 40% increase in oxygen production rates. Nutrient dispersion and utilization in the culture was also improved as evidenced by a corresponding 38% decrease in CO 2 concentration. The paddlewheel device presented here is a cost‐effective method for improving algal growth in a flat panel photobioreactor.

09 BIOMASS FUELS↗
DOE OSTI2025

Evolution of Structural Order and Magnetic Anisotropy in Yb 0.5 (Co 1– x Fe x ) 3 Ge 3 through Doping of a Kagome Lattice

Kagome materials provide fruitful grounds for exploring the intersection of topology and magnetism. In this article, the single crystal growth of Yb 0.5 (Co 1–x Fe x ) 3 Ge 3 (x = 0.00, 0.25, 0.50, 0.75, and 1.00) is reported. As Fe is substituted into the Co-containing kagome net, the structure transforms from the disordered Y 0.5 Co 3 Ge 3 /CoSn-type hybrid structure to the ordered HfFe 6 Ge 6 -type structure. Diffusive scattering is observed in all doped concentrations that eventually converge to a single reflection in the Fe end member, ultimately doubling the unit cell along the c-axis. Anisotropic magnetic measurements were performed to evaluate how the magnetism of the kagome lattice is influenced by Fe substitution. Magnetic interactions are primarily observed along the c-axis. Additionally, a reorientation of the magnetic easy axis is observed with increasing Fe incorporation, highlighting how the magnetism of this material can be chemically tuned. Resistivity with unusual behavior observed in the doped compositions is also reported. Furthermore, the rationale behind the structural evolution from disordered to ordered is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In Situ Insights into Cathode Calcination for Predictive Synthesis: Kinetic Crystallization of LiNiO 2 from Hydroxides

Abstract Calcination is a solid‐state synthesis process widely deployed in battery cathode manufacturing. However, its inherent complexity associated with elusive intermediates hinders the predictive synthesis of high‐performance cathode materials. Here, correlative in situ X‐ray absorption/scattering spectroscopy is used to investigate the calcination of nickel‐based cathodes, focusing specifically on the archetypal LiNiO 2 from Ni(OH) 2 . Combining in situ observation with data‐driven analysis reveals concurrent lithiation and dehydration of Ni(OH) 2 and consequently, the low‐temperature crystallization of layered LiNiO 2 alongside lithiated rocksalts. Following early nucleation, LiNiO 2 undergoes sluggish crystallization and structural ordering while depleting rocksalts; ultimately, it turns into a structurally‐ordered layered phase upon full lithiation but remains small in size. Subsequent high‐temperature sintering induces rapid crystal growth, accompanied by undesired delithiation and structural degradation. These observations are further corroborated by mesoscale modeling, emphasizing that, even though calcination is thermally driven and favors transformation towards thermodynamically equilibrium phases, the actual phase propagation and crystallization can be kinetically tuned via lithiation, providing freedom for structural and morphological control during cathode calcination.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Facile Fabrication of Self‐Assembly Functionalized Polythiophene Hole Transporting Layer for High Performance Perovskite Solar Cells

Abstract Crystallinity and crystal orientation have a predominant impact on a materials’ semiconducting properties, thus it is essential to manipulate the microstructure arrangements for desired semiconducting device performance. Here, ultra‐uniform hole‐transporting material (HTM) by self‐assembling COOH‐functionalized P3HT (P3HT‐COOH) is fabricated, on which near single crystal quality perovskite thin film can be grown. In particular, the self‐assembly approach facilitates the P3HT‐COOH molecules to form an ordered and homogeneous monolayer on top of the indium tin oxide (ITO) electrode facilitate the perovskite crystalline film growth with high quality and preferred orientations. After detailed spectroscopy and device characterizations, it is found that the carboxylic acid anchoring groups can down‐shift the work function and passivate the ITO surface, retarding the interface carrier recombination. As a result, the device made with the self‐assembled HTM show high open‐circuit voltage over 1.10 V and extend the lifetime over 4,300 h when storing at 30% relative humidity. Moreover, the cell works efficiently under much reduced light power, making it useful as power source under dim‐light conditions. The demonstration suggests a new facile way of fabricating monolayer HTM for high efficiency perovskite devices, as well as the interconnecting layer needed for tandem cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Interpretation of wide-angle x-ray diffraction patterns from mesophase pitch-based carbon fibers – a simulation and experimental study

Carbon fiber is a critical material in a wide range of industries, where it is highly valued for its high specific strength/stiffness, excellent wear resistance, efficient electrical and thermal transport properties, chemical resistance, and low coefficient of thermal expansion. The properties of a specific carbon fiber are closely tied to its structural characteristics at all length scales. Here, in this work, we applied wide-angle x-ray diffraction to a set of heat-treated mesophase pitch-based carbon fibers, with the goal of elucidating the crystalline structures as a function of fiber orientation. To assist with analysis and interpretation of the experimental data, we employed diffraction pattern simulations using the scalar and vector forms of the Debye scattering equation to determine the influence of basal plane orientation, crystalline ordering (turbostratic-graphitic), and basal plane asymmetry on the diffraction patterns. The results presented here suggest that growth of the transverse crystallites in mesophase pitch-based carbon fiber is fixed until graphitization temperatures are reached. The work completed here provides a framework for the analysis of carbon fiber and other oriented carbon-based materials via diffraction.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bandgap recovery of monolayer MoS 2 using defect engineering and chemical doping

Two-dimensional transition metal dichalcogenide materials have created avenues for exciting physics with unique electronic and photonic applications. Among these materials, molybdenum disulfide is the most known due to extensive research in understanding its electronic and optical properties. In this paper, we report on the successful growth and modification of monolayer MoS 2 (1L MoS 2 ) by controlling carrier concentration and manipulating bandgap in order to improve the efficiency of light emission. Atomic size MoS 2 vacancies were created using a Helium Ion Microscope, then the defect sites were doped with 2,3,5,6-tetrafluro7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The carrier concentration in intrinsic (as-grown) and engineered 1L MoS 2 was calculated using Mass Action model. The results are in a good agreement with Raman and photoluminescence spectroscopy as well as Kelvin probe force microscopy characterizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing unintentional Fe impurity incorporation in MOCVD homoepitaxy GaN: Toward GaN vertical power devices

Unintentional impurity incorporation in GaN drift layers represents a challenging issue that can limit their potential performance in vertical power devices. In this paper, we focus on studying the origins of Fe impurity incorporation in metal-organic chemical vapor deposition (MOCVD) grown GaN materials. Acting as a compensator in n-type GaN drift layers, Fe impurities can reduce the electron mobility in GaN and limit the lowest controllable doping level. Two sources, the sample cleaning process and growth susceptor, were identified as the main mechanisms of Fe incorporation in the MOCVD GaN growth process. It was found that solvent cleaning of the wafer can introduce significant Fe contamination at the growth interface, which would slowly be incorporated into the GaN epilayer, thus causing background Fe impurity as high as 10 17 cm -3 level. Moreover, the Fe impurity in the coating material on the susceptor can introduce additional Fe impurity during the growth process. Our studies revealed that the Fe impurity level could be significantly suppressed by more than two orders when an alternative cleaning process was used and the susceptor surface was fully covered by substrates. Characterization of the Fe impurity concentrations was performed via secondary ion mass spectrometry. The trap level (E C - 0.57) eV from deep-level transient spectroscopy that had previously been attributed to Fe confirmed the carrier compensation effect from Fe. Room temperature Hall mobility as high as 1007 cm 2 /V s was achieved on the MOCVD grown low-Fe GaN. Results from this work will provide guidance for achieving high purity GaN toward high performance GaN vertical power devices.

42 ENGINEERING↗
DOE OSTI2023

Demonstration of a 4.32 μ m cutoff InAsSbBi n B n photodetector, a lattice-matched random alloy III–V solution for mid-wave infrared sensing

InAsSbBi nBn photodetectors are demonstrated that are lattice-matched to the underlying GaSb substrate with a 4.32 μm wavelength cutoff at 150 K that is 0.3 μm longer than that of lattice-matched InAsSb at this temperature reflecting a 0.5% Bi mole fraction in the InAsSbBi active region. A low growth temperature was utilized to facilitate the incorporation of Bi, resulting in a minority carrier lifetime on the order of 24 ns in the InAsSbBi active region. Nevertheless, the detectors exhibit a quantum efficiency of 17% at 3.3 μm wavelength with a dark current density of 50 μA/cm2 at 150 K and −0.4 V bias and the strong photoresponse turn-on characteristic of a random alloy at 4.32 μm wavelength and 150 K. A shot noise-equivalent irradiance analysis indicates that this detectors' dark-current-limited noise-equivalent irradiance of 1012 cm−2 s−1 is two orders of magnitude greater than the Rule 07 expectation for this cutoff, and dark-current-limited shot noise-equivalent irradiance performance transitions to photon-limited at 1.7 × 1015 photons/cm2 s.

Physics↗
DOE OSTI2022

CoLoRe: fast cosmological realisations over large volumes with multiple tracers

We present CoLoRe, a public software package to efficiently generate synthetic realisations of multiple cosmological surveys.CoLoRe can simulate the growth of structure with different degrees of accuracy, with the current implementation supporting lognormal fields, first, and second order Lagrangian perturbation theory.CoLoRe simulates the density field on an all-sky light-cone up to a desired maximum redshift, and uses it to generate multiple 2D and 3D maps: galaxy positions and velocities, lensing (shear, magnification, convergence), integrated Sachs-Wolfe effect, line intensity mapping, and line of sight skewers for simulations of the Lyman-α forest. We test the accuracy of the simulated maps against analytical theoretical predictions, and showcase its performance with a multi-survey simulation including DESI galaxies and quasars, LSST galaxies and lensing, and SKA intensity mapping and radio galaxies. We expect CoLoRe to be particularly useful in studies aiming to characterise the impact of systematics in multi-experiment analyses, quantify the covariance between different datasets, and test cross-correlation pipelines for near-future surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Magnetic field induced a b -plane rotation of the Eu magnetic moments in trigonal EuMg 2 Bi 2 and EuMg 2 Sb 2 single crystals below their Néel temperatures

The thermodynamic and electronic-transport properties of trigonal EuMg 2 Bi 2 in ab-plane magnetic fields H x and the A-type antiferromagnetic structure have recently been reported. The Eu magnetic moments with spin S = 7/2 remain locked in the ab plane up to and above the ab-plane critical field $H^{c}_{x}$ = 27.5 kOe at which the Eu moments become parallel to H x . Here additional measurements at low fields are reported that reveal a new spin-reorientation transition at a field H c1 ≈ 465 Oe where the Eu moments remain in the ab plane but become perpendicular to H x . At higher fields, the moments cant toward the field resulting in M ∝ H x up to $H^{c}_{x}$. Similar results are reported from measurements of the magnetic properties of EuMg 2 Sb 2 single crystals, where H c1 ≈ 220 Oe is found. Theory is formulated that models the low-field magnetic behavior of both materials, and the associated anisotropies are calculated. Further, the ab-plane trigonal anisotropy in EuMg 2 Sb 2 is found to be significantly smaller than in EuMg 2 Bi 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The coronavirus spread: the Italian case

A model based on population growth, chaotic maps and turbulent flows is applied to the spread of Coronavirus for each Italian region in order to obtain useful information and help to contrast it. We divide the regions into different risk categories and discuss anomalies. The worst cases are confined between the Appenine and the Alps mountain ranges but the situation seem to improve closer to the sea. The Veneto region gave the most efficient response so far and some of their resources could be diverted to other regions, in particular more tests to the Lombardia, Liguria, Piemonte, Marche and V. Aosta regions, which seem to be worst affected. We noticed worrying anomalies in the Lazio, Campania and Sicilia regions to be monitored. We stress that the number of fatalities we predicted on March 12 has been confirmed daily by the bulletins. This suggests a change of strategy in order to reduce such number maybe moving the weaker population (and negative to the virus test) to beach resorts, which should be empty presently. The ratio deceased/positives on April 4, 2020 is 5.4% worldwide, 12.3% in Italy, 1.4% in Germany, 2.7% in the USA, 10.3% in the UK and 4.1% in China. Furthermore, these large fluctuations should be investigated starting from the Italian regions, which show similar large fluctuations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Growth phase estimation for abundant bacterial populations sampled longitudinally from human stool metagenomes

Longitudinal sampling of the stool has yielded important insights into the ecological dynamics of the human gut microbiome. However, human stool samples are available approximately once per day, while commensal population doubling times are likely on the order of minutes-to-hours. Despite this mismatch in timescales, much of the prior work on human gut microbiome time series modeling has assumed that day-to-day fluctuations in taxon abundances are related to population growth or death rates, which is likely not the case. Here, we propose an alternative model of the human gut as a stationary system, where population dynamics occur internally and the bacterial population sizes measured in a bolus of stool represent a steady-state endpoint of these dynamics. We formalize this idea as stochastic logistic growth. We show how this model provides a path toward estimating the growth phases of gut bacterial populations in situ. We validate our model predictions using an in vitro Escherichia coli growth experiment. Finally, we show how this method can be applied to densely-sampled human stool metagenomic time series data. We discuss how these growth phase estimates may be used to better inform metabolic modeling in flow-through ecosystems, like animal guts or industrial bioreactors.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Coupled Microbial-Conversion and Computational-Fluid-Dynamics (CFD) Models for Butanediol Production in Micro-Aerated Reactors

Microbial conversion of substrates to macromolecules has been widely used in the synthesis of value-added products in pharmaceutical and biotechnology industries. These bioreactions are also being investigated in the production of low-value commodities such as biofuels [1]. Gas-liquid mass-transfer and transport-reaction coupling are important challenges when designing and scaling up these reactor systems. Experiments in wellmixed small-scale reactors have enabled characterization of microbial reactivity, while their coupling with macroscale transport remains relatively unexplored. In this work, we use a coupled metabolic-CFD model to study the action of a genetically engineered microbe Zymomonas mobilis [2] on sugars to produce 2,3-Butanediol (BDO). BDO is an important hydrocarbon intermediate that can be catalytically upgraded to several fuels and chemicals [3]. An important aspect to this particular microbial conversion is the need for micro-aerated environments as opposed to traditional aerobic fermentation. Slight variations in oxygen concentration can result in competing reaction pathways that disable BDO production. Hence, gas-liquid mass transfer and transport need to be optimized in large-scale reactors to maximize BDO production, for which CFD is a valuable tool. The aerobic-fermentation CFD model previously developed by the authors [5] for simulating bubble-column and airlift reactors at scale was used in this study. The Reynolds-averaged mass, momentum and energy transport equations for interpenetrating gas and liquid phase are solved in this model along with the transport and interphase mass transfer of oxygen. Our previous work used a phenomenological model for microbial oxygen uptake that neglected microbial growth and other reaction pathways. In this work, a detailed metabolic model enabled prediction of product formation and inhibition pathways. In order to manage computational cost, we used a subcycling technique [6] that takes advantage of the clear separation in transport (~ 200 sec) and reaction (~ 2-3 hours) timescales. The CFD model is first solved to steady state, after which the metabolic model is advanced at every cell in the computational domain using the local oxygen concentration. The CFD model is then run to achieve a new steady state that provides a new oxygen distribution for the metabolic model. This process, where reaction and fluid updates are interleaved together, is iterated until reactants are completely exhausted. This work will examine the performance of different reactor designs such as bubble column and airlift reactors at scale (250-500 m3). Oxygen mass-transfer coefficient and distribution are critically analyzed among reactors, and optimization studies pertaining to aeration is presented. Furthermore, it has been observed in experiments that high BDO production may be achieved by manipulating the aerobic environment over the course of reaction, such that oxygen concentration is high during the growth phase, and very low as sugar is depleted. This characteristic will be addressed by our simulations for which a timedependent scheduling strategy for aeration is presented that maximizes BDO production. [1] Humbird, D., Davis, R., and McMillan, J., Aeration costs in stirred-tank and bubble column bioreactors, Biochemical Engineering Journal, 127, 161—166, 2017 [2] Yang, S., Mohagheghi, A., Franden, M. A., Chou, Y.-C., Chen, X., Dowe, N., Himmel, M. E., and Zhang, M., Metabolic engineering of zymomonas mobilis for 2, 3-butanediol production from lignocellulosic biomass sugars. Biotechnology for biofuels, 9(1):189, 2016 [3] Kim, S. J., Sim, H. J., Kim, J. W., Lee, Y. G., Park, Y. C., and Seo, J. H., Enhanced production of 2,3-butanediol from xylose by combinatorial engineering of xylose metabolic pathway and cofactor regeneration in pyruvate decarboxylase-deficient Saccharomyces cerevisiae. Bioresource Technology, 245:1551–1557, 2017 [4] Weller, H., Tabor, G., Jasak, H. and Fureby, C., A tensorial approach to computational continuum mechanics using object-oriented techniques, Computers in physics, 12, 6, 620--631, 1998

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Hidden order across online extremist movements can be disrupted by nudging collective chemistry

Disrupting the emergence and evolution of potentially violent online extremist movements is a crucial challenge. Extremism research has analyzed such movements in detail, focusing on individual- and movement-level characteristics. But are there system-level commonalities in the ways these movements emerge and grow? Here we compare the growth of the Boogaloos, a new and increasingly prominent U.S. extremist movement, to the growth of online support for ISIS, a militant, terrorist organization based in the Middle East that follows a radical version of Islam. We show that the early dynamics of these two online movements follow the same mathematical order despite their stark ideological, geographical, and cultural differences. The evolution of both movements, across scales, follows a single shockwave equation that accounts for heterogeneity in online interactions. These scientific properties suggest specific policies to address online extremism and radicalization. We show how actions by social media platforms could disrupt the onset and ‘flatten the curve’ of such online extremism by nudging its collective chemistry. Our results provide a system-level understanding of the emergence of extremist movements that yields fresh insight into their evolution and possible interventions to limit their growth.

99 GENERAL AND MISCELLANEOUS↗