Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Oxygen and sulfur interactions with a clean iron surface and the effect of rubbing contact on these interactions

An investigation was conducted to determine the nature of the chemical interactions of oxygen and sulfur with iron when surfaces are stationary and also during sliding in a vacuum environment. Various gases that contained sulfur, oxygen, or both were adsorbed to iron at 23 C. The gases included oxygen, hydrogen sulfide, methyl mercaptan, and sulfur dioxide. Friction experiments were conducted with a hemispherical rider sliding on a rotating disk. An Auger cylindrical mirror analyzer was used to monitor the iron surface chemistry. The results of this study indicate that oxygen will completely displace sulfide films from iron surfaces. Organic thiols containing sulfur, such as methyl mercaptan, adsorb to an iron surface dissociatively. Only sulfur is detected on the iron surface. Sliding inhibits the formation of sulfide films on iron with the adsorption of hydrogen sulfide and methyl mercaptan. With oxygen and sulfur dioxide, the sliding process does not affect adsorption behavior.

Buckley, D. H.↗
NASA NTRS1975

Study of the reaction of atomic oxygen with aerosols

The rate of disappearance of atomic oxygen was measured at several pressures in a fast flow pyrex reactor system with its walls treated with (NH4)2SO4 (s), H2SO4 (l), and NH4CL (s). Atomic oxygen, P-3 was generated by dissociation of pure, low pressure oxygen in a microwave discharge. Concentrations of atomic oxygen were measured at several stations in the reactor system using chemiluminescent titration with NO2. Recombination efficiencies calculated from experimentally determined wall recombination rate constants are in good agreement with reported values for clean Pyrex and an H2SO4 coated wall. The recombination efficiency for (NH4)2SO4, results in a slightly lower value than for H2S04. A rapid exothermic reaction between atomic oxygen and the NH4Cl wall coating prevented recombination efficiency determination for this coating. The results show that the technique is highly useful for wall recombination measurements and as a means of extrapolating to the case of free stream aerosol-gas interactions.

Akers, F. I.↗
NASA NTRS1975

Oxygen cost during exercise in simulated subgravity environments

Oxygen cost (VO2) and heart rate (HR) were determined during treadmill walking in simulated subgravity environments. The long axis of the subject's body was suspended parallel to the floor in a slow rotation room with feet aligned on the surface of a treadmill mounted 90 deg on the wall. Without rotation, the subjects were virtually weightless against the treadmill; with centrifugation, environments of 0.25, 0.5 and 1 G were simulated. Oxygen cost (open circuit) and HR (ECG) were measured during the 5th minute of walking at 3.2, 4.7 and 6.1 km/h. Similar measurements were also determined during walking at 1/2-G using the inclined plane technique. Oxygen cost per unit mass and HR were significantly reduced in all subgravity environments. However, net oxygen cost per unit weight carried and, therefore, mechanical efficiency was found to be independent of gravity. This supports the idea that the most probable cause for the decreased oxygen cost with reduced gravity is less body weight carried.

Fox, E. L.↗
NASA NTRS1976

High pressure liquid and gaseous oxygen impact sensitivity evaluation of materials for use at Kennedy Space Center

The sensitivity of materials in contact with gaseous oxygen (GOX) or liquid oxygen (LOX) was examined. Specifically, the reactivity of materials when in contact with GOX or LOX if subjected to such stimuli as mechanical impact, adiabatic compression (pneumatic impact), or an electrical discharge in the form of a spark were examined. Generally, materials are more sensitive in gaseous oxygen than in liquid oxygen and impact sensitivity is known to increase with increasing pressure. Materials presently being used or considered for use in oxygen systems at KSC were evaluated. Results are given in tabular form.

Bryan, C. J.↗
NASA NTRS1976

A kinetic study of the interaction between atomic oxygen and aerosols

This study was concerned with the effects of NH4Cl and (NH4)2SO4 aerosols on the kinetics of disappearance of atomic oxygen. Atomic oxygen was generated by a 2.45-GHz microwave discharge and the kinetics of disappearance measured in a fast flow system using NO2 titration. Values of the recombination coefficient for heterogeneous wall recombination were determined for clean, H2SO4-coated, and (NH4)2SO4-coated Pyrex to be 0.000050, 0.000020, and 0.000019, respectively. A rapid exothermic chemical reaction was found to occur between atomic oxygen and an NH4Cl wall coating; the products were NH3, NO, H2O, and HCl. The NH4Cl aerosol was generated by gas phase reaction of NH3 with HCl. The aerosol particles were approximately spherical and nearly monodisperse with a mean diameter of 1.6 plus or minus 0.2 micron. The rate constant for the disappearance of atomic oxygen in the presence of NH4Cl aerosol was measured. No significant decrease was observed in the rate of disappearance of atomic oxygen in the presence of an (NH4)2SO4 aerosol at a concentration of 285 mg per cu m.

Akers, F. I.↗
NASA NTRS1976

Atomic oxygen-metal surface studies as applied to mass spectrometer measurements of upper planetary atmospheres

The problem of atomic oxygen loss in mass spectrometer ion sources can be reduced to an understanding of the possible surface interactions between oxygen atoms and the metal surface of the ion source. Results are presented for an experimental study in which an atomic oxygen beam apparatus and a mass spectrometer were used to measure the oxygen atom reflection, recombination, general surface reaction, and occlusion probabilities on six different engineering surfaces as a function of atomic oxygen exposure. The materials studied are gold, Nichrome V, aluminum, titanium, silver, and platinum. The variation in measured reflection probability seems to occur with metals that form oxides, Nichrome V being stable in terms of reflection stability. Recombination is observed an all surfaces except aluminum and platinum. Variation in the complete set of measurements in a single experiment is the result of varying surface conditions.

Sjolander, G. W.↗
NASA NTRS1978

Metastable oxygen emission bands

Recombination of ground-state oxygen atoms populates six different bound electronic states of molecular oxygen. Of the six optical transitions expected between the three upper states at 4 to 4.5 electron volts and the two lowest states, five have been observed in the afterglow of a conventional helium-oxygen microwave discharge in both (O-16)2 and (O-18)2, three of them for the first time in gas-phase spectra. Generation of these emissions from oxygen atoms in a system free of molecular oxygen establishes that atom recombination is the production mechanism.

Slanger, T. G.↗
NASA NTRS1981

Hot oxygen atoms in the upper atmosphere of Venus

Using data obtained by an ultraviolet spectrometer on the Pioneer-Venus Orbiter, energy and altitude distribution of nonthermal oxygen atoms in the Venus atmosphere for typical daytime and nighttime conditions are calculated using two different numerical methods. Agreement is found between results obtained by the two-stream transport method and the diffusion equation technique. Dissociative recombination of molecular oxygen ions and charge exchange of atomic oxygen ions with the neutral hydrogen and oxygen gas are the source terms, and calculations show that the dissociative recombination term is the dominant one. It is shown that measured hot atom concentrations exceed estimates of the thermal hydrogen atom concentrations derived from Brinton et al. (1980) over most of the daytime exosphere, and the calculated concentrations do so to an even greater extent. It is concluded that hot oxygen atoms are an important component of the dayside exosphere of Venus, their most important effect being the absorption of solar wind.

Nagy, A. F.↗
NASA NTRS1982

Oxygen atom reaction with shuttle materials at orbital altitudes

Surfaces of materials used in the space shuttle orbiter payload bay and exposed during STS-1 through STS-3 were examined after flight. Paints and polymers, in particular Kapton used on the television camera thermal blanket, showed significant change. Generally, the change was a loss of surface gloss on the polymer with apparent aging on the paint surfaces. The Kapton surfaces showed the greatest change, and postflight analyses showed mass loss of 4.8 percent on STS-2 and 35 percent on STS-3 for most heavily affected surfaces. Strong shadow patterns were evident. The greatest mass loss was measured on surfaces which were exposed to solar radiation in conjunction with exposure in the vehicle velocity vector. A mechanism which involves the interaction of atomic oxygen with organic polymer surfaces is proposed. Atomic oxygen is the major ambient species at low orbital altitudes and presents a flux of 8 x 10 to the 14th power atoms/cu cm sec for reaction. Correlation of the expected mass loss based on ground-based oxygen atom/polymer reaction rates shows lower mass loss of the Kapton than measured. Consideration of solar heating effects on reaction rates as well as the high oxygen atom energy due to the orbiter's orbital velocity brings the predicted and measured mass loss in surprisingly good agreement. Flight sample surface morphology comparison with ground based Kapton/oxygen atom exposures provides additional support for the oxygen interaction mechanism.

Leger, L. J.↗
NASA NTRS1980

Armalcolite - An oxygen fugacity indicator

Lunar armaloclites, (Fe, Mg)Ti2O5, contain appreciable amounts of Ti(3+) (less than 1 to 17% of Ti mole fraction). This is a function of the oxygen fugacity occurring at the time of its formation, with lower fugacities being reflected in higher Ti(3+) contents. Controlled cooling-rate and isothermal experimentation on synthetic analog and natural specimens of 70017 and 74275 have been used to calibrate an oxygen geobarometer. Most lunar rocks have followed crystallization paths in oxygen fugacity/T space such that the prevailing oxygen fugacity can be represented by a curve near parallel to the I/W buffer curve. The oxygen fugacity estimates derived from Ti(3+) considerations of armalcolites range from the iron/wustite curve to about 1.5 log units below.

Stanin, F. T.↗
NASA NTRS1983

The effect of a non-Maxwellian electron distribution on oxygen and iron ionization balances in the solar corona

Analytic expressions are derived for ionization and recombination rates in a parameterized non-Maxwellian electron velocity distribution with an enhanced high-energy tail. These expressions are then used in investigating the effect of such an enhancement in the high-energy tail of the coronal electron velocity distribution on the oxygen and iron ionization balances, O(+6) - O(+7) and Fe(+11) - Fe(+12). Relative to a Maxwellian of the same mean electron energy, the degree of ionization allowed by such a distribution is found to be either unchanged or slightly decreased for iron but often substantially increased for oxygen. The greater sensitivity of oxygen ionization balance to the high-energy distribution tail derives from the higher oxygen ionization threshold energy. It is noted that the electron temperature inferred from a measurement of the oxygen ionization ratio, O(+6)/O(+7), could indeed overestimate the actual coronal electron temperature by nearly 10 to the 6th K if the coronal electron distribution is incorrectly assumed to be Maxwellian.

Owocki, S. P.↗
NASA NTRS1983

Temporal variations of the anomalous oxygen component

Data from the cosmic ray experiment on Voyagers 1 and 2 was used to examine anomalous oxygen in the time period from launch in 1977 to the end of 1981. Several time periods were found where large periodic (typically 26 day) temporal variations of the oxygen intensity between approximately 5 - 15 MeV/nuc are present. Variations in intensity by up to a factor of 10 are observed during these periods. Several characteristics of these variations indicate that they are not higher energy extensions of the low energy particle (approximately 1 MeV/nuc) increases found in many corotating interaction regions (CIR's). Many of these periodic temporal variations are correlated with similar, but much smaller, recurrent variations in the 75 MeV proton rate. Voyager 1 and Voyager 2 counting rates were compared to estimate the local radial gradient for both the protons and the oxygen. The proton gradients during periods of both maximum and minumum fluxes are consistent with the overall positive radial gradients reported by others from Pioneer and near-Earth observations, supporting the view that these variations are due to local modulation of a source outside the radial range of project measurements. In contrast, the oxygen gradients during periods of maximum proton flux differ in sign from those during minimum proton fluxes, suggesting that the origin of the oxygen variations is different from that of the protons.

Cummings, A. C.↗
NASA NTRS1984

Atomic-oxygen stimulated outgassing (A0034)

The objective of this experiment is to determine if the impingement of atomic oxygen in near-Earth orbit is a major factor in producing optically damaging outgassed products. The expected results will be to obtain samples which have been exposed to atomic oxygen for long durations. Analysis of these samples will determine if the impingement of atomic oxygen on the thermal control surfaces stimulates a significant amount of outgassed products. This experiment will give a clearer picture of the contamination problem and will assist in assuring that future Shuttle payloads, such as the Space Telescope and High-Energy Astronomy Observatory, will not experience Skylab contamination levels. Selected thermal control surfaces will be exposed to the atomic oxygen in near-Earth orbit. Passive collecting samples will collect any induced outgassing resulting from oxygen impingement. The optical condition of the passive samples will be measured using a ground-based integrating sphere reflectometer and a directional reflectometer.

Scott, R. L., Jr.↗
NASA NTRS1984

Increase in whole-body peripheral vascular resistance during three hours of air or oxygen prebreathing

Male and female subjects prebreathed air or 100% oxygen through a mask for 3.0 hours while comfortably reclined. Blood pressures, heart rate, and cardiac output were collected before and after the prebreathe. Peripheral vascular resistance (PVR) was calculated from these parameters and increased by 29% during oxygen prebreathing and 15% during air prebreathing. The oxygen contributed substantially to the increase in PVR. Diastolic blood pressure increased by 18% during the oxygen prebreathe while stystolic blood pressure showed no change under either procedure. The increase in PVR during air prebreathing was attributed to procedural stress common to air and oxygen prebreathing.

Waligora, J. M.↗
NASA NTRS1984

The effect of oxygen on denitrification during steady-state growth of Paracoccus halodenitrificans

Steady-state cultures of Paracoccus halodenitrificans were grown anaerobically prior to establishing steady states at different concentrations of oxygen. In the absence of oxygen, nitrate-limited cultures produced dinitrogen, and as the oxygen supply increased, these cultures produced nitrous oxide, then nitrite. These changes reflected two phenomena: the inactivation of nitrous oxide reductase by oxygen and the diversion of electrons from nitrite to oxygen.

Hochstein, L. I.↗
NASA NTRS1986

Oxygen-Concentrating Cell

High-purity oxygen produced from breathing air or from propellantgrade oxygen in oxygen-concentrating cell. Operating economics of concentrator attractive: Energy consumption about 4 Wh per liter of oxygen, slightly lower than conventional electrochemical oxygen extractors.

Buehler, K.↗
NASA NTRS1986

Oxygen and the evolution of metabolic pathways

While a considerable amount of evidence has been accumulated about the history of oxygen on this planet, little is known about the relative amounts to which primitive cells might have been exposed. One clue may be found in the metabolic pathways of extant microorganisms. While eucaryotes are principally aerobic organisms, a number are capable of anaerobic growth by fermentation. One such eucaryotic microorganism, Saccharomyces cerevisiae, will grow in the complete absence of oxygen when supplemented with unsaturated fatty acid and sterol. Oxygen-requiring enzymes are involved in the synthesis of both of these compounds. Studies have demonstrated that the oxidative desaturation of palmitic acid and the conversion of squalene to sterols occur in the range of 10-(3) to 10(-2) PAL. Thus, if the oxygen requirements of these enzymatic processes are an indication, eucaryotes might be more primitive than anticipated from the microfossil record. Results of studies on the oxygen requirements for sterol and unsaturated fatty acid synthesis in a more primitive procaryotic system are also discussed.

Jahnke, L. L.↗
NASA NTRS1985

Concentrations and behavior of oxygen and oxide ion in melts of composition CaO.MgO.xSiO2

The behavior of oxygen and oxide ion in silicate melts was investigated through their electrochemical reactions at a platinum electrode. Values are given for the diffusion coefficient for molecular oxygen in diopside melt and the activation energy of diffusion. It is shown that molecular oxygen dissociates prior to undergoing reduction and that oxide ion reacts quickly with silicate polymers when it is produced. The concentration of oxide ion is kept low by a buffering effect of the silicate, the exact level being dependent on the silicate composition. Data on the kinetics of reaction of the dissociation of molecular oxygen and on the buffering reactions are provided. It is demonstrated that the data on oxygen in these silicate melts are consistent with those for solid buffers.

Semkow, K. W.↗