Search NASA⌕ Search

SEARCH · Search NASA

Results for “r process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Some optical and kinetic properties of the nearby interstellar gas

A model for resonant scattering of sunlight by the nearby interstellar gas is developed which takes into account the modification of a Maxwell-Boltzmann velocity distribution by a central force. While the formalism applies to both hydrogen and helium, the latter is emphasized. Theoretical line profiles and integrated emission rates for helium are compared with those of approximate models and with existing observations. As a result of this analysis, an upward revision of the bulk flow velocity of interstellar helium relative to the solar system, previously deduced from He 584-A observations, is required. Velocities of 15-20 km/s, temperatures of the order of 5000-10,000 K, and densities of the order of 0.008-0.02 per cu cm are sufficient to explain the (helium) observations. However, higher-precision measurements are required in order to place more stringent limits on the gas parameters. Calculations of the flux of interstellar helium atoms impinging on earth's upper atmosphere show that the resulting impact ionization is small compared with terrestrial processes.

Meier, R. R.↗
NASA NTRS1976

A moving-window parameter adaptive control system for the F8-DFBW aircraft

This paper describes the moving-window parameter adaptive control system developed for the NASA F8-DFBW aircraft. The control system employs a parameter identification process that, iteratively, adjusts parameters of a model of the aircraft motions in a batch processing manner so that responses generated from the model fit the outputs of sensors stored in a finite record referred to as the moving window. Tests are made on the validity of the parameter estimates before using the parameters in an on-line design process. The on-line design process is an algebraic mapping of the parameters of the model into primary control system feedback and feedforward gains. The mapping was selected to satisfy specific flying quality characteristics over the range of parameter variations expected. Results are presented from simulation studies on the identification algorithm, tests for parameter validity, and the on-line design process.

Montgomery, R. C.↗
NASA NTRS1977

The NASA high-power carbon dioxide laser - A versatile tool for laser applications

The NASA Lewis Research Center has designed and fabricated a closed-cycle, continuous wave (CW), carbon dioxide (CO2) high-power laser to support research for the identification and evaluation of possible high-power laser applications. The device is designed to generate up to 70 kW of laser power in annular-shape beams from 1 to 9 cm in diameter. Electric discharge, either self-sustained or electron-beam-sustained, is used for excitation. This laser facility can be used in two ways. First, it provides a versatile tool on which research can be performed to advance the state-of-the-art technology of high-power CO2 lasers in such areas as electric excitation, laser chemistry, and quality of output beams, all of which are important whether the laser application is government or industry oriented. Second, the facility provides a well-defined, continuous wave beam for various application experiments, such as propulsion, power conversion, and materials processing.

Lancashire, R. B.↗
NASA NTRS1976

Metal spherules in Wabar, Monturaqui, and Henbury impactites

The Fe, Ni, and Co contents of 450 spherules with diameters of 3 to 100 microns in impact glasses from three terrestrial meteorite craters are determined by electron microprobe analysis. The objects investigated include 250 spherules from Wabar (Saudi Arabia) impactite and 100 each from Monturaqui (Chile) and Henbury (Australia) impactites. The specimens and spherules are described, noting that the Wabar and Henbury craters were produced in sandstone while the Monturaqui crater was formed in siliceous igneous rocks and has an enigmatic sulfide abundance. It is found that the spherules are enriched in Ni and Co relative to the original meteorite Fe content and are enriched in Ni relative to Co for Ni contents greater than 50%. The results indicate that, on the average, Henbury spherules are more Ni-enriched than Monturaqui spherules, and Wabar spherules exhibit the least Ni-enrichment. It is suggested that the spherules could have formed without experiencing free flight and that instantaneous dissemination of meteoritic material at the meteorite-target contact was the major fractionation process.

Gibbons, R. V.↗
NASA NTRS1977

Application of numerical optimization to the design of supercritical airfoils without drag-creep

Recent applications of numerical optimization to the design of advanced airfoils for transonic aircraft have shown that low-drag sections can be developed for a given design Mach number without an accompanying drag increase at lower Mach numbers. This is achieved by imposing a constraint on the drag coefficient at an off-design Mach number while the drag at the design Mach number is the objective function. Such a procedure doubles the computation time over that for single design-point problems, but the final result is worth the increased cost of computation. The ability to treat such multiple design-point problems by numerical optimization has been enhanced by the development of improved airfoil shape functions. Such functions permit a considerable increase in the range of profiles attainable during the optimization process.

Hicks, R. M.↗
NASA NTRS1977

An asymptotic analysis of a general class of signal detection algorithms

For applications to the problem of radio frequency interference identification, or in the search for extraterrestrial intelligence, it is important to have a basic understanding of signal detection algorithms. A general technique for assessing the asymptotic sensitivity of a broad class of signal detection algorithms is given. In these algorithms, the decision is based on the value of X sub 1 + X sub 2...+ X sub n where the X sub 1's are obtained by sampling and preliminary processing of a physical process.

Mceliece, R. J.↗
NASA NTRS1973

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 1A: Summary

IPAD was defined as a total system oriented to the product design process. This total system was designed to recognize the product design process, individuals and their design process tasks, and the computer-based IPAD System to aid product design. Principal elements of the IPAD System include the host computer and its interactive system software, new executive and data management software, and an open-ended IPAD library of technical programs to match the intended product design process. The basic goal of the IPAD total system is to increase the productivity of the product design organization. Increases in individual productivity were feasible through automation and computer support of routine information handling. Such proven automation can directly decrease cost and flowtime in the product design process.

Miller, R. E., Jr.↗
NASA NTRS1977

Laser-zone growth in a Ribbon-To-Ribbon (RTR) process. Silicon sheet growth development for the large area silicon sheet task of the low cost silicon solar array project

The Ribbon-to-Ribbon (RTR) approach to silicon ribbon growth is investigated. An existing RTR apparatus is to be upgraded to its full capabilities and operated routinely to investigate and optimize the effects of various growth parameters on growth results. A new RTR apparatus was constructed to incorporate increased capabilities and improvements over the first apparatus and to be capable of continuous growth. New high power lasers were implemented and this led to major improvements in growth velocity -- 4 inch/min. growth has been demonstrated. A major step in demonstration of the full feasibility of the RTR process is reported in the demonstration of RTR growth from CVD polyribbon rather than sliced polyribbon ingots. Average solar cell efficiencies of greater than 9% and a best cell efficiency of 11.7% are reported. Processing was shown to provide a substantial improvement in material minority carrier diffusion length. An economic analysis is reported which treats both the polyribbon fabrication and RTR processes.

Gurtler, R. W.↗
NASA NTRS1978

Determination of particle size using measurement of scatter

A literature search was conducted to determine the state of the art particle size measurement by the light scatter technique. This technique may involve diffraction pattern analysis, location of minima and maxima in angular dependence of scattered light, magnitude of intensity verses angle, forward lobe scattered intensity ratio using two small angles, forward scatter in a small cone, and total scatter. Some of the more modern recordings and detection systems are video, holographic, and systems using optical processing.

Scott, R. L., Jr.↗
NASA NTRS1980

High-temperature insulation

Lightweight insulating material works over very broad temperature range. Material is unaffected by moisture or hydraulic oil and is usable at temperatures ranging from 2,200 F (1,200 C) to cryogenic levels. It is readily applied to number of high-temperature and cryogenic processes.

Mowers, R. E.↗
NASA NTRS1978

Optical, spin-resonance, and magnetoresistance studies of /tetrathiatetracene/2/iodide/3 - The nature of the ground state

A recent investigation in which Isett and Perez-Albuerne (1977) found that (tetrathiatetracene)2(iodine)3 is a stable organic metal down to 3.3 K is of considerable interest. In view of the diversity of suggestions made regarding this compound, measurements, were made of its electrical, magnetic, and optical properties. The results obtained indicate a metallic state at high temperatures, but also support a nonmetallic state at temperatures below 30 K. At 20-30 K, a metal-to-insulator phase transition occurs. This is indicated by the onset of a large and positive magnetoresistance, the leveling off in the temperature dependence of the ESR linewidth, and by recent derivative analysis of the electrical conductivity in this region. The investigated compound represents an interesting one-dimensional electronic system in which it may be possible to study the combined effects of disorder and interchain coupling on charge transport processes.

Somoano, R. B.↗
NASA NTRS1979

On the internal structure of the major satellites of the outer planets

The structures and thermal evolutions of the large icy-satellites of the outer solar system are considered. It is shown (for bodies comparable in size and mass to the Galilean satellites, having sizeable mass fraction of H2O, and with meteoritic abundances of radioactive materials contained within their silicate fractions) that the crust of solid ice over a liquid mantle predicted by conductive heat-transfer calculations is unstable to large-scale solid-state convection. For appropriate material parameters, convective heat-transfer rates are sufficient to freeze a large liquid mantle on a time scale that is short compared to the lifetime of the body. It is also concluded that the ice layer is convecting at the present time. A reevaluation of previous work, using improved values for material parameters and boundary conditions, reverses earlier conclusions and implies a rigid outer crust with resulting long-term stability of surface features to creep deformation. The combination of a rigid crust with active internal convection presents the additional possibility of surface features that are produced and maintained by dynamic internal processes.

Reynolds, R. T.↗
NASA NTRS1979

Beta-galactosidase and selective neutrality

Three hypotheses to explain the amino acid composition of proteins are inconsistent (about 10 to the minus 9th) with the experimental data for beta-galactosidase from Escherichia coli. The exceptional length of this protein, 1021 residues, permits rigorous tests of these hypotheses without complication from statistical artifacts. Either this protein is not at compositional equilibrium, which is unlikely from knowledge about other proteins, or the evolution of this protein and its coding gene have not been selectively neutral. However, the composition of approximately 60% of the molecule is consistent with either a selectively neutral or nonneutral evolutionary process.

Holmquist, R.↗
NASA NTRS1979

Monitoring of thickness changes of the continental ice sheets by satellite altimetry

Radar altimeter measurements from the GEOS 3 satellite are being utilized to define the topography of the southern Greenland ice sheet between latitudes 60 deg N and 65 deg N. The resultant elevations have been correlated with two geoceiver sites on the ice surface; the agreement is within a few meters. The internal repeatability of the altimeter-derived elevations has been assessed at the crossovers of the satellite ground tracks; the observed agreements vary from 0.07 to 3.10 m, intervening times being 1 day and 674 days, respectively. Improved knowledge of the temporal changes in the topographic expression of the continental ice sheets, via satellite altimetry, will significantly add to the understanding of glaciological and climatological processes.

Brooks, R. L.↗
NASA NTRS1979

Characteristics of the spectra of protons and alpha particles in recurrent events at 1 AU

A study of 31 individual recurrent events from three long-lived corotating particle streams is presented. The spectra of protons and alpha particles during these streams are fit well by an exponential in particle rigidity. Although the spectra show considerable temporal variation, the proton and alpha particle spectra are correlated so that the e-folding rigidities Po(alpha) and Po(p) of the two spectra are in the ratio Po(alpha)/Po(p) = 1.5 plus or minus 0.1. The consistency of this ratio may be a characteristic of the interplanetary acceleration process.

Mewaldt, R. A.↗
NASA NTRS1981

Improving MOS minority-carrier lifetime

Fluorine implantation increases minority-carrier lifetime in silicon by factor of 100, enhancing power efficiency in MOS applications. Implantation does not increase microdefects at silicon surface when thin oxide layers are grown, and process gathers existing impurities near surface without adversely affecting MOS electrical parameters. With these advantages, fluorine may be left on wafer surfaces after processing.

Cockrum, R. H.↗
NASA NTRS1980

Textbooks and technical references for remote sensing

A selective bibliography is presented which cites 89 textbooks, monographs, and articles covering introductory and advanced remote sensing techniques, photointerpretation, photogrammetry, and image processing.

Rudd, R. D.↗