Search NASA⌕ Search

SEARCH · Search NASA

Results for “redox active materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Quantifying redox heterogeneity in single-crystalline LiCoO 2 cathode particles

Active cathode particles are fundamental architectural units for the composite electrode of Li-ion batteries. The microstructure of the particles has a profound impact on their behavior and, consequently, on the cell-level electrochemical performance. LiCoO 2 (LCO, a dominant cathode material) is often in the form of well-shaped particles, a few micrometres in size, with good crystallinity. In contrast to secondary particles (an agglomeration of many fine primary grains), which are the other common form of battery particles populated with structural and chemical defects, it is often anticipated that good particle crystallinity leads to superior mechanical robustness and suppressed charge heterogeneity. Yet, sub-particle level charge inhomogeneity in LCO particles has been widely reported in the literature, posing a frontier challenge in this field. Herein, this topic is revisited and it is demonstrated that X-ray absorption spectra on single-crystalline particles with highly anisotropic lattice structures are sensitive to the polarization configuration of the incident X-rays, causing some degree of ambiguity in analyzing the local spectroscopic fingerprint. To tackle this issue, a methodology is developed that extracts the white-line peak energy in the X-ray absorption near-edge structure spectra as a key data attribute for representing the local state of charge in the LCO crystal. This method demonstrates significantly improved accuracy and reveals the mesoscale chemical complexity in LCO particles with better fidelity. In addition to the implications on the importance of particle engineering for LCO cathodes, the method developed herein also has significant impact on spectro-microscopic studies of single-crystalline materials at synchrotron facilities, which is broadly applicable to a wide range of scientific disciplines well beyond battery research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The organic redox transistor for neuromorphic computing

Inspired by the in-memory computing architectures of biological systems, neuromorphic computing using crossbar arrays of artificial synapses based on non-volatile memory (NVM) devices with variable conductances has emerged as a new paradigm to enable massively parallel and ultra-low power computing hardware for data centric applications. Although inference has been demonstrated successfully using crossbars based on a variety of NMV technologies, efficient learning and scaling to large arrays (>10 6 elements) remains a challenge due to the synaptic elements' non-ideal electrical characteristics which degrades ANN accuracy. A further challenge is that in the conductive state memristors draw large currents >μA resulting in significant voltage drops in the interconnect wires and increased probability of failure in scaled arrays. We suggest the organic polymer redox transistor (RT) is an alternate approach that could solve many of these challenges, enabling both inference and parallel outer product updates, as recently demonstrated by Fuller et al. An RT consists of redox-active channel and gate electrodes in contact with a liquid or solid electrolyte. lon insertion through the electrolyte controls the channel electronic conductivity, while electron transfer through an external circuit maintains overall charge neutrality. Unlike a rechargeable battery, in the RT the voltage built-up across the electrolyte is kept to a minimum (typically <100 mV) by using the same material for the gate and channel. Elimination of the voltage offset simplifies integration of the RT into programmable arrays by enabling the use of various selectors. RTs based on inorganic and organic materials have been recently demonstrated with conductance tuning occurring at potentials of just a few mV and hundreds to thousands of linearly and symmetrically programmable conductance states, enabling near ideal accuracy in neural network simulations. Introduced in the 1980's, redox transistors with metallic gate electrodes and organic channel materials, also known as organic electrochemical transistors (OECTs), have been explored for a variety of applications such as chem- and bio-sensing, neural interfaces, and low cost printed circuits. A typical channel material for OECTs is the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS). PEDOT is a p-type semiconducting polymer with mobile positively charged polarons that hop chain-to-chain.

Talin, Albert Alec↗
DOE OSTI2022

Supramolecular Control of Redox-Mediated Interactions for Ion-Selective Electroseparations

This report summarizes efforts from the Su Group at the University of Illinois at Urbana-Champaign in researching and developing materials and processes for the recovery of rare earth elements and other metal elements that are critical to the United States economy and national security, under DOE Award No. DE-SC0021409. This report highlights efforts in the recovery of: • Transition metal elements (including arsenic, chromium, molybdenum, rhenium, vanadium): Redox-active metallopolymers are able to capture these elements in their oxyanion form. Direct control of target ion capture/release through electrochemical-mediated switching of metallocene binding sites reduces chemical input and lowers generation of waste in element recovery processes. We study the effects of metallopolymer structure on targeted ion binding through a combination of experimental screening of ion selectivity from multi-component mixtures, computational efforts which elucidate the charge-transfer origins of metallocene binding and provide insight on how binding site structure influences selectivity, and state-of-the-art neutron reflectivity of metallocene polymer films to understand the interplay of polymer-ion (charge-transfer), polymer-solvent (polymer hydrophilicity/hydrophobicity), and ion-solvent (ion hydration) interactions with spatial resolution of polymer films. • Rare earth elements (including yttrium, neodymium, europium, gadolinium, dysprosium, cerium): Here we employ redox-copolymers for recovery of rare earth elements by electrochemically regenerated ion-exchange. Rare earth elements require an alternative route to capture/release than directly with metallopolymers since rare earth elements typically exist in cationic form in water. To address this, copolymerization of traditional ion-exchange moieties with metallocene moieties allowed for capture of rare earth elements with the ion-exchange moieties and electrochemical-mediated release of rare earth elements through oxidation of metallocene moieties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrochemical Characterization of Molten Salt Chemistry During Atmospheric Ingressions

This report describes the salt chemistry and sedimentation studies that were completed in FY23 as part of the Pyrochemical Fuel Cycles – ANL project. The primary objective of these activities was to employ electrochemical methods in order to quantify and gain insights into the reaction mechanisms associated with the interaction of O2 and moisture impurities with the molten chloride salts used for the pyrochemical processing of nuclear materials. If not monitored and controlled, the ingression of these atmospheric impurities can lead to changes in the salt redox conditions and initiate the formation of oxide particles, potentially resulting in operational and safeguards challenges. By elucidating the mechanisms underlying the formation of oxide particles, we can effectively monitor the conditions of the salt and design systems to mitigate the influence of atmospheric O2 and H2O. To achieve these goals, we designed a test system that allowed for precisely controlled gas ingressions into the molten salt vessel. This system included on-line monitoring provided by electrochemical probes that enable near real-time measurements of the salt conditions throughout the course of the experiment. Using this system, we systematically varied experimental conditions, including O2/Ar flow rates and O2 concentrations, to comprehensively understand their impact on solid particle formation. We also used a particle size and shape analyzer to characterize the particles that were generated. Tests in FY23 concentrated on the formation of CeO2 particles, but we also prepared a separate apparatus targeting UO2 particles for use in FY24. We additionally conducted extensive modeling activities in support of this work. This included multiphysics simulations of the gas ingressions along with the development of a machine learning workflow to enable accelerated molecular dynamics modeling of the molten salt chemistry of LiCl-KCl-UCl3. The combination of experimental and modeling tools has allowed us to begin to get a more complete understanding of the reactions that occur when atmospheric ingressions occur in pyroprocessing systems.

Guo, Jicheng↗
DOE OSTI2024

Role of Metal–Organic Framework Topology on Thermodynamics of Polyoxometalate Encapsulation

Polyoxometalates (POMs) are discrete anionic clusters whose rich redox properties, strong Brønsted acidity, and high availability of active sites poise them as potent catalysts for oxidation reactions. Here, metal–organic frameworks (MOFs) have emerged as tunable, porous platforms to immobilize POMs, thus increasing their solution stability and catalytic activity. While POM@MOF composite materials have been widely used for a variety of applications, little is known about the thermodynamics of the encapsulation process. Here, we utilize an up-and-coming technique in the field of heterogeneous materials, isothermal titration calorimetry (ITC), to obtain full thermodynamic profiles (ΔH, ΔS, ΔG, K a ) of POM binding. Six different 8-connected hexanuclear Zr-MOFs were investigated to determine the impact of MOF topology (csq, scu, the) on POM encapsulation thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of Substrate Temperature on the Electrochemical and Supercapacitance Properties of Pulsed Laser-Deposited Titanium Oxynitride Thin Films

Electrocatalytically active titanium oxynitride (TiNO) thin films were fabricated on commercially available titanium metal plates using a pulsed laser deposition method for energy storage applications. The elemental composition and nature of bonding were analyzed using X-ray photoelectron spectroscopy (XPS) to reveal the reacting species and active sites responsible for the enhanced electrochemical performance of the TiNO electrodes. Symmetric supercapacitor devices were fabricated using two TiNO working electrodes separated by an ion-transporting layer to analyze their real-time performance. The galvanostatic charge–discharge studies on the symmetric cell have indicated that TiNO films deposited on the polycrystalline titanium plates at lower temperatures are superior to TiNO films deposited at higher temperatures in terms of storage characteristics. For example, TiNO films deposited at 300 °C exhibited the highest specific capacity of 69 mF/cm 2 at 0.125 mA/cm 2 with an energy density of 7.5 Wh/cm 2 . The performance of this supercapacitor (300 °C TiNO) device is also found to be ~22% better compared to that of a 500 °C TiNO supercapacitor with a capacitance retention ability of 90% after 1000 cycles. Furthermore, the difference in the electrochemical storage and capacitance properties is attributed to the reduced leaching away of oxygen from the TiNO films by the Ti plate at lower deposition temperatures, leading to higher oxygen content in the TiNO films and, consequently, a high redox activity at the electrode/electrolyte interface.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Evaluating uncertainty-based active learning for accelerating the generalization of molecular property prediction

Deep learning models have proven to be a powerful tool for the prediction of molecular properties for applications including drug design and the development of energy storage materials. However, in order to learn accurate and robust structure–property mappings, these models require large amounts of data which can be a challenge to collect given the time and resource-intensive nature of experimental material characterization efforts. Additionally, such models fail to generalize to new types of molecular structures that were not included in the model training data. The acceleration of material development through uncertainty-guided experimental design has the promise to significantly reduce the data requirements and enable faster generalization to new types of materials. To evaluate the potential of such approaches for electrolyte design applications, we perform comprehensive evaluation of existing uncertainty quantification methods on the prediction of two relevant molecular properties - aqueous solubility and redox potential. We develop novel evaluation methods to probe the utility of the uncertainty estimates for both in-domain and out-of-domain data sets. Finally, we leverage selected uncertainty estimation methods for active learning to evaluate their capacity to support experimental design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mesoporous Thin Film Architectures: Addressing Material Demands through Molecular Self-Assembly

Mesoporous thin films spark interest across a wide range of disciplines due to their tunable nanostructures, large internal surface areas, and strong compatibility with planar optical, electronic, and microfluidic devices. While attention in the porous materials community has shifted toward macroporous or disordered nanoporous systems, a resurgence in mesoporous thin film research is underway, driven by new molecular self-assembly methods, advanced materials chemistry, and improved characterization techniques. The integration of high-χN block copolymer design, kinetically persistent micelle templating, and postdeposition processing protocols now allows control over structural parameters such as pore size, wall thickness, porosity, and connectivity. These advances have overcome many of the thermodynamic and processing constraints that previously limited widespread adoption. Rather than serving only as high-surface-area supports, mesoporous thin films are engineered as active interfaces where responsive chemistries and nanoscale confinement act in tandem. Embedding switchable ligands, thermoresponsive polymers, redox mediators, or ion-selective groups directly within the pore walls enables real-time control over transport, optical, and electrochemical properties. These capabilities open up new directions in adaptive coatings, gated membranes, and fast-response biosensors. To further expand their functional scope, mesoporous films are integrated into hierarchical and multicomponent architectures. Techniques such as triblock terpolymer templating, crack-directed assembly, and nanoimprint lithography allow for control over spatial organization on the micron and submicron scale and pore system orientation. This enables programmable anisotropy, enhanced molecular diffusion, and wavelength-selective photonic behavior, essential for next-generation sensing, catalysis, and energy applications. Such structural and functional complexity requires equally sophisticated characterization. Multimodal and in situ techniques can track material dynamics under operational conditions. Recent progress includes extended-range ellipsometric porosimetry (EP) for hierarchical architectures, vacuum EP for interface energetics, time-resolved EP for diffusion kinetics, and correlative AFM-SAXS mapping. The introduction of advanced neutron-based spectroscopies, particularly quasielastic neutron scattering (QENS), promises to provide real-time access to ion transport dynamics and segmental motion under nanoscale confinement, offering a path toward deeper mechanistic understanding of structure-performance correlations in mesoporous systems. This Account reflects the technical advances made and the interdisciplinary collaborations that have shaped our collective vision. The particular dimensions of mesopores enable us to subtly tune interactions at the molecular, interfacial, and mesoscopic levels that permit us to harness nanoconfinement. What emerges is a versatile, modular platform capable of chemical gating, energy transduction, and sensing with a level of tunability unmatched by other porous materials. We highlight critical challenges including the need for more robust large-area processing, a deeper understanding of dynamic behavior under cycling, and better integration with device-level architectures. Our strategies support the transition of mesoporous thin films into active high-performance components in next-generation energy, environmental, and biomedical systems.

oxides↗
DOE OSTI2022

Aqueous spray-drying synthesis of alluaudite Na 2+2x Fe 2–x (SO 4 ) 3 sodium insertion material: studies of electrochemical activity, thermodynamic stability, and humidity-induced phase transition

In pursuit of high-energy density sodium insertion materials, polyanionic frameworks can be designed with tuneable high-voltage operation stemming from inductive effect. Alluaudite Na 2 Fe 2 (SO 4 ) 3 polysulfate forms one such earth-abundant compound registering the highest Fe 3+ /Fe 2+ redox potential (ca. 3.8 V vs. Na/Na + ). While this SO 4 -based system exhibits high voltage operation, it is prone to thermal decomposition and moisture attack leading to hydrated derivatives, making its synthesis cumbersome. Also, the Na–Fe–S–O quaternary system is rich with (anhydrous to hydrated) phase transitions. Herein, we demonstrate scalable aqueous-based spray drying synthesis of alluaudite Na 2+2x Fe 2–x (SO 4 ) 3 sodium insertion material involving the formation of bloedite Na 2 Fe(SO 4 ) 2 ·4H 2 O as an intermediate phase. Moreover, a reversible phase transition from alluaudite to bloedite under controlled conditions of temperature and relative humidity is reported for the first time. Thermochemistry measurements revealed the enthalpies of formation (ΔH° f ) of alluaudite and bloedite are exothermic. Hydrated bloedite (ΔH° f = –117.16 ± 1.10 kJ/mol) was found to be significantly more energetically stable than anhydrous alluaudite (ΔH° f = –11.76 ± 1.25 kJ/mol). The calorimetric data support the observed synthesis and transformation (hydration-dehydration) pathways. Spray drying route led to spherical morphology delivering capacity ~80 mAh/g. Spray drying can be extended for rapid economic synthesis of sulfate class of battery materials.

25 ENERGY STORAGE↗
DOE OSTI2023

3D-Printed Graded Electrode with Ultrahigh MnO 2 Loading for Non-Aqueous Electrochemical Energy Storage

Electrolytic manganese dioxide is one of the promising cathode candidates for electrochemical energy storage devices due to its high redox capacity and ease of synthesis. Yet, high-loading MnO 2 often suffers from sluggish reaction kinetics, especially in non-aqueous electrolytes. The non-uniform deposition of MnO 2 on a porous current collectors also makes it difficult to fully utilize the active materials at high mass loading. Here, a 3D printed graded graphene aerogel (3D GA) that contains sparsely separated exterior ligaments is developed to create large open channels for mass transport as well as densely arranged interior ligaments providing large ion-accessible active surface. The unique structural design homogenizes the thickness of electro deposited MnO 2 even at an ultrahigh mass loading of ≈70 mg cm -2 . The electrode achieves a remarkable volumetric capacity of 29.1 mA h cm -3 in the non-aqueous electrolyte. A Li-ion hybrid capacitor device assembled with a graded 3D GA/MnO2 cathode and graded 3D GA/VO x anode exhibits a wide voltage window of 0–4 V and a superior volumetric energy density of 20.2 W h L -1 . The findings offer guidance on 3D printed electrode design for supporting ultrahigh loading of active materials and developments of high energy density energy storage devices.

electrochemical energy storage↗
DOE OSTI2022

Direct Observation of Modulated Radical Spin States in Metal–Organic Frameworks by Controlled Flexibility

Owing to their switchable spin states and dynamic electronic character, organic-based radical species have been invoked in phenomena unique to a variety of fields. When incorporated in solid state materials, generation of organic radicals proves challenging due to aggregation. Metal–organic frameworks (MOFs) are promising candidates for immobilization and stabilization of organic radicals because of the tunable spatial arrangement of organic linkers and metal nodes, which sequesters the reactive species. Herein, a flexible, redox-active tetracarboxylic acid linker bearing two imidazole units was chosen to construct a new Zr 6 -MOF, NU-910, with scu topology. By exploiting the structural flexibility of NU-910, we successfully modulate the dynamics between an isolated organic radical species and an organic radical π-dimer species in the MOF system. Single-crystal X-ray diffraction analysis reveals that through solvent exchange from N,N-diethylformamide to acetone, NU-910 undergoes a structural contraction with interlinker distances decreasing from 8.32 Å to 3.20 Å at 100 K. Organic radical species on the bridging linkers are generated via UV light irradiation. Direct observation of temperature-induced spin switches from an isolated radical species to a magnetically silent radical π-dimer in NU-910 after irradiation in the solid state was achieved via variable-temperature single-crystal X-ray diffraction and variable-temperature electron paramagnetic resonance spectroscopy. Ultraviolet–visible–near infrared spectroscopy and density functional theory calculations further substantiated the formation of a radical cation π-dimer upon irradiation. As a result, this work demonstrates the potential of using flexible MOFs as a platform to modulate radical spin states in the solid phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Phosphonium-Based Metal Halide Semiconductors: When a Single Atom Dictates Water and Thermal Stability

Phosphonium-based (R-P(R’) 3 + ) metal halide semiconductors (MHS) emerged recently as a promising family of materials offering enhanced water and thermal stability over conventional ammonium-based (R-NH 3 + ) MHS. Despite this performance, there is a lack of systematic studies that elucidate the origin of these features as well as the underlying optoelectronic properties. Here, we report here the synthesis of nine new 1D materials (L)PbX 3 (L= C4-P, C6-P, C6-N, P3-P, P4-P, X= I, Br), using custom made organic ligands, namely butyl(triethyl)phosphonium bromide (C4-P), hexyl(triethyl)phosphonium bromide (C6-P), benzyl(triethyl)phosphonium bromide (P3-P), benzyl(trimethyl)phosphonium bromide (P4-P), and hexyl(triethyl)ammonium bromide (C6-N). Most of the materials are water stable for over 21 months, while the assembly of the isostructural (C6-N)PbBr 3 and (C6-P)PbBr 3 allowed us to directly identify the impact of a single atom (phosphorus versus nitrogen), on water stability. Notably, the C6-P analog remains water stable for 21 months, whereas the C6-N analog dissolves in water. It was found that neither crystal packing nor the lack of hydrogen bond interactions with water is responsible for this record stability performance, challenging currently established claims on the 1 origin of water stability in MHS. All materials feature broad light emission at RT, with (P3-P)PbBr 3 exhibiting a PLQY of 22.0% ascribed to permanent traps, while electrochemical studies uncovered for the first time the redox properties and their strong potential for the sensing of per- and polyfluoroalkyl substances (PFAS) in water samples. Our work showcases the potential of these compounds for applications where thermal and water stability are interwoven, potentially rendering their (R-NH 3 + ) based counterparts obsolete.

PFAS sensing↗
DOE OSTI2024

Supported Organochromium Ethylene Oligomerization Enabled by Surface Lithiation

Here, in this work, supported organochromium ethylene polymerization catalysts have been tuned to mediate ethylene oligomerization via surface lithiation, which provides a generalizable protocol to control stereoelectronics and redox states of surface organometallic active sites. The homoleptic chromium(IV) alkyl complex Cr(CH 2 SiMe 3 ) 4 was grafted on high-surface-area anatase titania (TiO 2 ) nanoparticles as well as on silica to produce Cr/TiO 2 and Cr/SiO 2 , respectively. Treatment of these materials with excess n-butyllithium led to the reduced chromium complexes Cr/Li x TiO 2 and Cr/Li/SiO 2 , each of which still retains one hydrocarbyl ligand on chromium. A set of heterogeneous complexes were studied by electron paramagnetic resonance and X-ray absorption spectroscopy, which indicate a reduction in the oxidation state of the major chromium species to Cr II upon lithiation. Cr/Li x TiO 2 converts ethylene to hexenes with a high selectivity (>80%), which was persistent over 10 days at 80 °C, achieving >950 turnovers. The exclusive formation of C 4 and C 6 olefins, preferring the trimerization product, without a statistical (Flory–Schulz) distribution is characteristic of the oxidative cyclization oligomerization mechanism rather than the traditional Cossee–Arlman mechanism, whereas Cr/Li/SiO 2 produced a mixture of trimerization and polymerization products, suggesting site heterogeneity in the silica-based material. On the other hand, the unreduced chromium(IV) materials as well as low lithium-containing Cr/Li x TiO 2 (x < 0.16) exclusively produced ultrahigh molecular weight polyethylene, determined by differential scanning calorimetry and gel permeation chromatography analysis, likely formed via a linear-insertion mechanism, with a crossover from the polymerization to oligomerization regime observed at ~16% Li intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interfacial Engineering of Metal Chalcogenides‐based Heterostructures for Advanced Sodium‐Ion Batteries

Sodium-ion batteries (SIBs) have become one of the most promising candidates for large-scale energy storage applications. Metal chalcogenides anode materials based on alloying or conversion reactions are widely studied because of their high theoretical capacities and rich redox reactions. However, their intrinsic limitations such as high voltage hysteresis and large volume expansion hinder their further applications. The construction of heterostructures has become an attractive strategy to alleviate the above issues. Here, the formation of built in electric fields (BIEFs) at the heterointerfaces will accelerate the migration of Na + and electrons. Moreover, heterostructures can also enhance the structural stability, generate more active sites and provide additional capacity. It is worth noting that heterointerfacial properties play a significant role in promoting the overall electrochemical performance of the heterostructures. However, a systematic understanding of their interfacial engineering is currently lacking. This article reviews the research progress of metal chalcogenides-based heterostructure anode materials in the near term. First, the definition, classification and the roles of heterostructures are introduced. Second, the detailed research progress of the metal chalcogenide-based heterostructures anodes in SIBs is discussed. Finally, the future prospects and potential research directions of the heterostructures for batteries are discussed.

anode↗
DOE OSTI2025

Exsolution of NiCo alloys over Ruddlesden-Popper perovskite for mild electrochemical synthesis of ammonia on protonic ceramic electrochemical cells

Ammonia synthesis from renewable energies on protonic ceramic electrochemical cells (PCECs) shows great potential. The primary challenges in ammonia synthesis on PCECs include sluggish catalytic activity, competition from the hydrogen evolution reaction, and unsatisfactory durability of the cathode, which is the active site of ammonia generation. Here, in this study, we report an elaborate design of the cathode with an intended formula of Pr 4 Ni 1.79 Co 1.2R u 0.01 O 10-δ , where NiCo alloy nanoparticles are exsolved from Ruddlesden-Popper perovskite substrates after the reduction in 5 % H 2 /Ar at 400 °C for 1 h, for electrocatalysis of the nitrogen reduction reaction to ammonia. The host material Pr 4 Ni 1.8 Co 1.2 O 10-δ with embeddable layered structure and stability was deliberately chosen to fix the Ru cation and maximize the catalytic activity of NiCo. Also, density functional theory calculations suggest that Ru doping provides an optimal balance between structural stability and redox activity, facilitating the controlled exsolution of NiCo nanoparticles and enhancing catalytic performance. As a result, the composite electrode with exsolved NiCo alloy and abundant oxygen vacancies on fuel-electrode-supported PCECs achieves a superior electrochemical activity towards ammonia synthesis: a peak ammonia formation rate of 27.84 μg h −1 cm −2 and excellent Faradaic efficiencies of 62.6 % at 350 °C.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Scalable Solar Fuels Production in A Reactor Train System by Thermochemical Redox Cycling of Novel Nonstoichiometric Perovskites

Hydrogen production via two-step thermochemical water splitting redox cycles using nonstoichiometric redox-active metal oxides has the potential to dramatically increase fuel production rates. At moderate-to-low water splitting temperatures, surface reaction kinetics co-limit the process. In such cases, stable and high surface area microstructures that allow exploitation of the full thermodynamic potential of the materials are essential as is tight thermal integration of the reactor module. This project’s goals were the development of novel nonstoichiometric perovskite oxides with high stability and favorable thermodynamic and kinetic properties, to optimize their microstructure for maximizing the fuel productivity, and to build a prototype reactor train system (RTS) comprising at least one reactor to meet specific performance targets: (1) capable of an in-house solar thermochemical hydrogen (STCH) productivity ≥ 12 mL g -1 for stable continuous operation ≥ 20 cycles; and (2) demonstration of scalable solar fuels production at practical solar reactor level in an industrial-scale concentrated solar tower (CST) using developed perovskites to achieve a hydrogen production rate ≥ 1 g h -1 .

08 HYDROGEN↗
DOE OSTI2025

Wastepaper-derived porous carbon supported cobalt nanocomposites for all solid-state flexible supercapacitor

The conversion of wastepaper into high-value carbon materials has gained significant attention as a sustainable strategy for energy storage applications. Owing to its low cost, abundance, and intrinsic fibrous structure, wastepaper serves as an attractive precursor for carbon-based electrode materials. In this work, a novel electrode comprising cobalt nanoparticles and Co 3 O 4 embedded in wastepaper-derived porous carbon has been developed for use in a flexible all-solid-state asymmetric supercapacitor. The integration of cobalt nanoparticles and Co 3 O 4 introduces redox-active centres, which enhance the electrochemical activity of the carbon framework. Mean while, the interconnected porous and conductive carbon network enables rapid ion diffusion and efficient electron transport, synergistically improving the overall electrochemical performance. It delivers a high specific capacitance of 61.5 Fg -1 , a power density of 5143 W kg -1 , and an energy density of 9 Wh kg -1 at a current density of 2.5 A/ g. Furthermore, the device maintains outstanding cycling stability, retaining 82.86 % of its capacitance after 10,000 charge-discharge cycles. Practical applicability is confirmed through its ability to power

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reactive Carbon Capture: Cooperative and Bifunctional Adsorbent-Catalyst Materials and Process Integration for a New Carbon Economy

To say the least, releasing CO 2 into the atmosphere is reaping undue environmental consequences given the ever-present increase in severe global weather events over the past five years. However, it can be argued that–at least in the confines of current technological capabilities–the atmospheric release of CO 2 is somewhat unavoidable given that even shifting toward clean energy sources–such as solar, nuclear, wind, battery, or H 2 power–incurs an initial carbon requirement by way of manufacturing the very production abilities through which “clean” energy is generated. Even years from now, experts agree that energy production will be diversified and–as the global population continues to drive the growth of global energy consumption–thermal power derived from carbon combustion is likely to remain one intrinsic energetic source, of which CO 2 will always be a byproduct. In this context, it is the responsibility of the scientific community to devise improved pathways of carbon management such that (i) the consequences of combustion on the global environment are reduced and (ii) carbon fuels can be leveraged in a sustainable fashion. In this Account, we discuss a pivotal perspective shift on CO 2 emissions derived from a considerable breakthrough in material science from our work on shape engineering of nanoporous adsorbents and catalysts. This account details the development of materials which no longer vilify CO 2 emissions as a valueless combustion byproduct, instead providing a path for them to become a potential feedstock. In more specific terms, this work details the development of structured, cooperative “bifunctional” materials (BFMs) comprised of (i) a high-temperature adsorbent and (ii) a heterogeneous catalyst that enable single-bed CO 2 capture and utilization in oxidative ethane dehydrogenation (ODHE), oxidative propane dehydrogenation (ODHP), and dry methane reforming (DMR) processes. This Account begins with the conceptual development of the BFMs in the powdered state, followed by detailing the first-ever reports of structuring the materials into facile honeycomb contactors by 3D printing. The Account then summarizes the impressive performance of the 3D-printed BFMs, specifically focusing on how their catalysts (metal oxides and perovskites) influence their reactive CO 2 capture performances in ODHE, ODHP, and DMR processes. Such promise of CO 2 -as-fuel offers a glimpse into the future of a diversified energy economy, in which CO 2 /fuel looping can play an important role. A major factor in achieving this future is, of course, developing an appropriately active catalyst; an account of whose first breakthroughs in material science are detailed herein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗