Search NASA⌕ Search

SEARCH · Search NASA

Results for “response theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Briefing on Sonic Boom and Aircraft Noise

This document is a presentation for a NAS-NRC committee on the SuperSonic Transport (SST) sonic boom. It consists of copies of the slides presented during the briefing. The topics covered in reference to Sonic Booms are: the result of sonic boom results on generation and propagation, the atmospheric effects, flight research and laboratory research and prediction theory developments, the structural responses, seismic responses and simulation and human factors from the recent research on the effects of sonic booms, Domestic SST, and evaluation of certain minimum boom concepts from advanced configuration studies. The topics covered in the aircraft noise section are studies on compressor noise reduction, acoustic treatment of nacelle ducts, some technical problems of airplane certification and studies relating to subjective responses.

Source record↗

Direct Relationship Between Perceptual and Motor Variability

The time that elapses between stimulus onset and the onset of a saccadic eye movement is longer and more variable than can be explained by neural transmission times and synaptic delays (Carpenter, 1981, in: Eye Movements: Cognition & Visual Perception, Earlbaum). In theory, noise underlying response-time (RT) variability could arise at any point along the sensorimotor cascade, from sensory noise arising Vvithin the early visual processing shared Vvith perception to noise in the motor criterion or commands necessary to trigger movements. These two loci for internal noise can be distinguished empirically; sensory internal noise predicts that response time Vvill correlate Vvith perceived stimulus magnitude whereas motor internal noise predicts no such correlation. Methods. We used the data described by Liston and Stone (2008, JNS 28:13866-13875), in which subjects performed a 2AFC saccadic brightness discrimination task and the perceived brightness of the chosen stimulus was then quantified in a second 21FC perceptual task. Results. We binned each subject's data into quartiles for both signal strength (from dimmest to brightest) and RT (from slowest to fastest) and analyzed the trends in perceived brightness. We found significant effects of both signal strength (as expected) and RT on normalized perceived brightness (both p less than 0.0001, 2-way ANOVA), without significant interaction (p = 0.95, 2-way ANOVA). A plot of normalized perceived brightness versus normalized RT show's that more than half of the variance was shared (r2 = 0.56, P less than 0.0001). To rule out any possibility that some signal-strength related artifact was generating this effect, we ran a control analysis on pairs of trials with repeated presentations of identical stimuli and found that stimuli are perceived to be brighter on trials with faster saccades (p less than 0.001, paired t-test across subjects). Conclusion. These data show that shared early visual internal noise jitters perceived brightness and the saccadic motor output in parallel. While the present correlation could theoretically result, either directly or indirectly, from some low-level brainstem or retinal mechanism (e.g., arousal, pupil size, photoreceptor noise) that influences both visual and oculomotor circuits, this is unlikely given the earlier fin ding that the variability in perceived motion direction and smooth-pursuit motor output is highly correlated (Stone and Krauzlis, 2003, JOV 3:725-736), suggesting that cortical circuits contribute to the shared internal noise.

Liston, Dorion B.↗

Mesoscale Modeling Approach for Quantifying Microstructure-Aware Micromechanical Responses in Metal Hydrides

Metal hydrides can undergo significant volume changes upon hydrogen uptake and release, which induce a mechanical response that depends not only on the evolving hydrogen composition but also on the microstructure. We present a comprehensive mesoscale modeling framework based on microelasticity theory to quantify the micromechanical responses of metal hydrides, specifically focusing on a hydrogenating polycrystalline MgH 2x particle within a host material as a model micromechanical system. Utilizing digitally generated realistic microstructures and density-functional-theory-derived parameters, we analyzed highly nonuniform local stress profiles in the polycrystalline hydrides under the clamping force exerted by the host during hydrogenation. Our framework also allows us to predict the corresponding strain energy accumulation and mechanical hot spots formation in the hydrides, highlighting their roles in thermodynamic destabilization and mechanical failure, respectively. Through extensive parametric simulations, we further quantified the influence of interface type, crystallinity, grain size, loading ratio, and host stiffness, providing practical guidance for optimizing microstructural design and host material selection. This proposed approach is broadly applicable to micromechanical systems with complex microstructural features involving chemical reaction- and/or phase-transformation-induced deformation.

36 MATERIALS SCIENCE↗

Inelastic deformation of metal matrix composites

A theoretical model capable of predicting the thermomechanical response of continuously reinforced metal matrix composite laminates subjected to multiaxial loading was developed. A micromechanical model is used in conjunction with nonlinear lamination theory to determine inelastic laminae response. Matrix viscoplasticity, residual stresses, and damage to the fiber/matrix interfacial zone are explicitly included in the model. The representative cell of the micromechanical model is considered to be in a state of generalized plane strain, enabling a quasi two-dimensional analysis to be performed. Constant strain finite elements are formulated with elastic-viscoplastic constitutive equations. Interfacial debonding is incorporated into the model through interface elements based on the interfacial debonding theory originally presented by Needleman, and modified by Tvergaard. Nonlinear interfacial constitutive equations relate interfacial tractions to displacement discontinuities at the interface. Theoretical predictions are compared with the results of an experimental program conducted on silicon carbide/titanium (SiC/Ti) unidirectional, (O4), and angle-ply, (+34)(sub s), tubular specimens. Multiaxial loading included increments of axial tension, compression, torque, and internal pressure. Loadings were chosen in an effort to distinguish inelastic deformation due to damage from matrix plasticity and separate time-dependent effects from time-independent effects. Results show that fiber/matrix debonding is nonuniform throughout the composite and is a major factor in the effective response. Also, significant creep behavior occurs at relatively low applied stress levels at room temperature.

Lissenden, C. J.↗

The responses of the thermosphere due to a geomagnetic storm: A MHD model

A magnetohydrodynamics theory was used to study the dynamic response of the neutral atmosphere to a geomagnetic storm. A full set of magnetohydrodynamic equations appropriate for the present problem is derived and their various orders of approximation are discussed in some detail. In order to demonstrate the usefulness of this theoretical model, the May 1967 geomagnetic storm data were used in the resulting set of nonlinear, time dependent, partial differential magnetohydrodynamic equations to calculate variations of the thermosphere due to the storm. The numerical results are presented for wind speeds, electric field strength, and amount of joule heating at a constant altitude for the data recorded. Data show that the strongest thermospheric responses are at the polar region becoming weaker in the equatorial region. This may lead to the speculation that a thermospheric wave is generated in the polar region due to the geomagnetic storm which propagates towards the equator.

Wu, S. T.↗

Statistical mechanics of light elements at high pressure. V Three-dimensional Thomas-Fermi-Dirac theory

A numerical technique for solving the Thomas-Fermi-Dirac (TED) equation in three dimensions, for an array of ions obeying periodic boundary conditions, is presented. The technique is then used to calculate deviations from ideal mixing for an alloy of hydrogen and helium at zero temperature and high presures. Results are compared with alternative models which apply perturbation theory to calculation of the electron distribution, based upon the assumption of weak response of the electron gas to the ions. The TFD theory, which permits strong electron response, always predicts smaller deviations from ideal mixing than would be predicted by perturbation theory. The results indicate that predicted phase separation curves for hydrogen-helium alloys under conditions prevailing in the metallic zones of Jupiter and Saturn are very model dependent.

Macfarlane, J. J.↗

Efficient simulations of charge density waves in the transition metal Dichalcogenide TiSe 2

Charge density waves (CDWs) in transition metal dichalcogenides are the subject of growing scientific interest due to their rich interplay with exotic phases of matter and their potential technological applications. Here, using density functional theory with advanced meta-generalized gradient approximations (meta-GGAs) and linear response time-dependent density functional theory (TDDFT) with state-of-the-art exchange-correlation kernels, we investigate the electronic, vibrational, and optical properties in 1T-TiSe 2 with and without CDW. In both bulk and monolayer TiSe 2 , the electronic bands and phonon dispersions in either normal or CDW (semiconducting) phase are described well via meta-GGAs, which separate the valence and conduction bands just as HSE06 does but with significantly more computational feasibility. The experimentally observed humps of electron energy loss spectroscopy are successfully reproduced in TDDFT. Our work opens the door to simulating these complexities in CDW compounds from first principles by revealing meta-GGAs as an accurate low-cost alternative to HSE06.

Electronic properties and materials↗

Scattering of an utlrashort laser pulse by a spherical air bubble

The scattering of an ultrashort laser pulse by an air bubble in water is investigated by means of the Lorenz-Mie theory and the Debye expansion. A 70 fs, 800 nm pulse is considered as a plane wave with a Gaussian temporal envelope. The transient response is treated with the theory derived from Gouesbet and Gréhan [ Part. Part. Syst. Charact. 17 , 213 –224 ( 2000 ) ], taking now into account chromatic dispersion and absorption of water. It is observed that contrary to the case of water droplet in air, the Debye modes p ≥ 1 start their transient scattering at the same time and the same angle (≈90 ° ) and for a large size parameter, they differentiate as time elapses. A parametric study on the size parameter and the spatial extension of the pulse is performed to identify regimes where the different Debye mode are distinguishable in time. Dependence on the scattering angle is also treated. Finally, by considering pulse chirp, it is shown that the laser/bubble distance has an influence on the separability of modes p = 0 and p = 1.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analytic Guided-Search Model of Human Performance Accuracy in Target- Localization Search Tasks

Current models of human visual search have extended the traditional serial/parallel search dichotomy. Two successful models for predicting human visual search are the Guided Search model and the Signal Detection Theory model. Although these models are inherently different, it has been difficult to compare them because the Guided Search model is designed to predict response time, while Signal Detection Theory models are designed to predict performance accuracy. Moreover, current implementations of the Guided Search model require the use of Monte-Carlo simulations, a method that makes fitting the model's performance quantitatively to human data more computationally time consuming. We have extended the Guided Search model to predict human accuracy in target-localization search tasks. We have also developed analytic expressions that simplify simulation of the model to the evaluation of a small set of equations using only three free parameters. This new implementation and extension of the Guided Search model will enable direct quantitative comparisons with human performance in target-localization search experiments and with the predictions of Signal Detection Theory and other search accuracy models.

Eckstein, Miguel P.↗

Less Common Topological Phenomena in Bulk Materials

"Prediction and subsequent discovery of topological insulators is considered to be one of the main results in condensed matter physics in the last decades. Not surprisingly, it has received major attention of both researchers and funding agencies. This attention is well-deserved; yet, one cannot but note that nearly all this research revolves about essentially the same concept: electronic excitations with linear dispersion, covering, of course, such diverse and intriguing phenomena as topological insulator, bulk Dirac states (or Weyl, if not spin degenerate), Mayorana fermions. In this project, we will address, mainly, other topological phenomena, such as topologically nontrivial magnetic patterns (as, for instance, topological Hall and related phenomena). Specifically, we propose three interrelated trusts: (1) Time-reversal symmetry breaking nonrelativistic antiferromagnets, called altermagnets. These are materials that break Kramers degeneracy of electronic bands, despite having zero net magnetization by symmetry and being fully collinear, and not necessarily non-centrosymmetric. The corresponding band structure is very similar to the band structure in non-centrosymmetric spin-orbital materials, but materials that we propose to study are distinctly different, first and foremost in the sense that despite sharing many aspects of their electronic properties with the latter, they break the time-reversal symmetry without either spin-orbit coupling or lack of inversion symmetry. (2) Topologically nontrivial magnetic spirals. The PI has been engaged with the experimental group of Dr. Ghimire at GMU investigating Dirac materials with helical magnetism, based on stacked magnetic Kagome layers, with a generic formula of RMn6Sn6. In particular, Y Mn6Sn6 demonstrates a component of the Hall effect that is naturally interpreted in terms of a topological spin texture, as well as linear magnetoresistance. Our calculation identify Dirac states that are robust with respect to the spiral formation, and let us derive an advance mean-field model explaining the observed phase diagram. This model predicted four distinct phases, with very distinct properties, which have now been seen in neutron experiments. The same compound is known to demonstrate topological Hall effect in a particular magnetic phase, and only at elevated temperature. Based on our understanding of the phase diagram, we have worked out a phenomenological theory of a chiral (skyrmionic) response to an external magnetic field, similar to the nematic response to external strain in Fe-based superconductors, which is possible in a centrosymmetric lattice and without interplanar Dzyaloshinskii-Moriya interaction. This phenomenological theory agrees quantitatively with the experiment. It is in our plans to research other similar materials for this effect. (3) Search for 3D analogues of Fe-based superconductors. We want to investigate materials that can be viewed as 3D analogues of FeSe. Specifically, we want materials that are good metals and host antiferromagnetism, which can be suppressed by pressure and generate an s-wave superconductivity, as in Fe-based superconductors. We have in mind some candidates already. This work will proceed in close collaboration with the experimental group of Prof. Nirmal Ghimire in the same department, whose expertise lies in sample making, magnetometry and transport measurements of materials with complex magnetic structures."

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Postbuckling response and failure prediction of flat rectangular graphite-epoxy plates loaded in axial compression

The objectives of the study are to assess the capability of a first-order shear deformable degenerated shell finite element theory to predict the postbuckling response and failure modes of various graphite-epoxy panels loaded in axial compression. Two panels without holes and one with a hole are studied, and the resulting responses and failure modes correlated well with the experimental results. A progressive damage failure mechanism is applied in the nonlinear analysis, which proved successful in predictions of failure location, mode, and load.

Engelstad, S. P.↗

A chemical kinetics theory for interpreting the non-monotonic temperature dependence of enzymatic reactions

Abstract. One notable observation of enzymatic chemical reactions is that, for a given abundance of enzymes and substrates, temperature increases cause reaction rates to first increase consistent with the Arrhenius relationship, then plateau, and finally fall off quickly to zero at high temperatures. While many mathematical functions have been used to describe this pattern, we here propose a chemical kinetics theory which successfully replicates this observation and provides insights into the processes responsible for these dynamics. The chemical kinetics theory combines the law of mass action, von Smoluchowski's diffusion-limited chemical reaction theory, and Eyring's transition state theory. This new theory reveals that the thermally reversible enzyme denaturation ensured by the ceaseless thermal motion of molecules and ions in an enzyme solution explains the plateau and subsequent decrease in chemical reaction rates with increasing temperature. The temperature-dependent affinity parameter (K) that relates enzymes and substrates through their binding also affects the shape of the emergent temperature response. We demonstrate that with an increase in substrate availability, K shifts the optimal temperature, where reaction rates plateau, towards higher values. Further, we show that the chemical kinetics theory accurately represents 12 sets of published enzyme assay data and includes the popular mechanistic model by Ratkowsky et al. (2005) as a special case. Given its good performance and solid theoretical underpinning, we believe this new theory will facilitate the construction of more mechanistic-based environmental biogeochemical models.

Tang, Jinyun↗

Influence of an asymmetric ring on the modeling of an orthogonally stiffened cylindrical shell

Structural models are examined for the influence of a ring with an asymmetrical cross section on the linear elastic response of an orthogonally stiffened cylindrical shell subjected to internal pressure. The first structural model employs classical theory for the shell and stiffeners. The second model employs transverse shear deformation theories for the shell and stringer and classical theory for the ring. Closed-end pressure vessel effects are included. Interacting line load intensities are computed in the stiffener-to-skin joints for an example problem having the dimensions of the fuselage of a large transport aircraft. Classical structural theory is found to exaggerate the asymmetric response compared to the transverse shear deformation theory.

Rastogi, Naveen↗

A Nonvolume Preserving Plasticity Theory with Applications to Powder Metallurgy

A plasticity theory has been developed to predict the mechanical response of powder metals during hot isostatic pressing. The theory parameters were obtained through an experimental program consisting of hydrostatic pressure tests, uniaxial compression and uniaxial tension tests. A nonlinear finite element code was modified to include the theory and the results of themodified code compared favorably to the results from a verification experiment.

Cassenti, B. N.↗

Transient response of multidegree-of-freedom linear systems to forcing functions with inequality constraints

Optimal control theory is applied to analyze the transient response of discrete linear systems to forcing functions with unknown time dependence but having known bounds. Particular attention is given to forcing functions which include: (1) maximum displacement of any given mass element, (2) maximum relative displacement of any two adjacent masses, and (3) maximum acceleration of a given mass. Linear mechanical systems with an arbitrary number of degrees of freedom and only one forcing function acting are considered. In the general case, the desired forcing function is found to be a function that switches from the upper-to-lower bound and vice-versa at certain moments of time. A general procedure for finding such switching times is set forth.

Michalopoulos, C. D.↗

An endochronic model for the response of unidirectional composites under off-axis tensile load

A methodology of modelling both nonlinear elastic and dissipative response of transversely isotropic fibrous composites is developed and illustrated with the aid of the observed response of graphite-polyimide off-axis coupons. The methodology is based on the internal variable formalism employed within the text of classical irreversible thermodynamics and entails extension of Valanis' endochronic theory to transversely isotropic media. Applicability of the theory to prediction of various response characteristics of fibrous composites is illustrated by accurately modelling such often observed phenomena as: stiffening reversible behavior along fiber direction; dissipative response in shear and transverse tension characterized by power-laws with different hardening exponents; permanent strain accumulation; nonlinear unloading and reloading; and stress-interaction effects.

Pindera, M. J.↗