Search NASA⌕ Search

SEARCH · Search NASA

Results for “separations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

LARGE PARTICLE SEPARATION FROM NON-NEWTONIAN SLURRIES USING BUMP ARRAYS

Here we evaluate the performance of bump arrays to separate large particles from non-Newtonian slurries with Bingham and Cross rheology. Bump arrays in deterministic lateral displacement devices separate large particles from small particles using arrays of staggered posts. Large particles, defined as those with radii larger than the distance between the edge of a post and the stagnation streamline from the next downstream post, must bump toward one side of the device, whereas particles smaller than this distance slalom from entrance to exit. Although these devices have been used to separate a wide variety of large particles from blood cells to sand, partition of large particles from non-Newtonian fluids remains unexplored. Yet, an important set of modestly concentrated slurries, including Hanford nuclear waste, displays non-Newtonian rheology. Here we evaluate the influence of non-Newtonian rheology on the large-small particle size cutoff in bump arrays using a model that explores the influence of yield stresses, ratios of zero and infinite shear viscosities, and Cross’s exponent under strictly laminar well-developed conditions. Surprisingly, we find that viscosity ratios and Cross’s exponent make no significant difference on the particle cutoffs between large particles that bump and small particles that slalom around the posts from entrance to exit. In contrast, we find that yield stresses do significantly affect the size cutoff. As the yield stress increases, the velocity profiles become more plug like lowering the size cutoff. For nuclear waste separations where removing large particles is a priority, increasing yield stresses is conservative.

slurry, solids removal, deterministic later displa↗

Can Bump Arrays Separate Particles from Turbulent Flows?

In this paper, we evaluate the hypothesis that bump arrays can be used to separate particles from turbulent flows entering the array. Microfluidic bump arrays are known for separating particles by size from laminar inlet flows. However, turbulent inlet flows have not been explored but become important as microfluidic bump arrays are scaled up to mesofluidic bump arrays. We find experimentally that particle separation is indeed effective at higher Reynolds numbers. These experimental findings portend industrial scale particle separation due to the higher flow rates they facilitate.

Pease, Leonard F.↗

Liquid solution centrifugation for safe, scalable, and efficient isotope separation

A general method of separating isotopes by centrifuging dissolved chemical compounds in a liquid is introduced. This technique can be applied to almost all elements and leads to large separation factors. The method has been demonstrated in several isotopic systems including Ca, Mo, O, and Li with single-stage selectivities of 1.046 to 1.067 per neutron mass difference (e.g., 1.43 in 40 Ca/ 48 Ca), which are beyond the capabilities of various conventional methods. Equations are derived to model the process, and the results agree with those of the experiments. The scalability of the technique has been demonstrated by a three-stage enrichment of 48 Ca with a total 40 Ca/ 48 Ca selectivity of 2.43, and the scalability is more broadly supported through analogies to gas centrifuge, whereby countercurrent centrifugation can further multiply the separation factor by 5 to 10 times per stage in a continuous process. Optimal centrifuge conditions and solutions can achieve both high-throughput and highly efficient isotope separation.

07 ISOTOPE AND RADIATION SOURCES↗

Measurement of isotopic separation of argon with the prototype of the cryogenic distillation plant Aria for dark matter searches

The Aria cryogenic distillation plant, located in Sardinia, Italy, is a key component of the DarkSide-20k experimental program for WIMP dark matter searches at the INFN Laboratori Nazionali del Gran Sasso, Italy. Aria is designed to purify the argon, extracted from underground wells in Colorado, USA, and used as the DarkSide-20k target material, to detector-grade quality. In this paper, we report the first measurement of argon isotopic separation by distillation with the 26 m tall Aria prototype. We discuss the measurement of the operating parameters of the column and the observation of the simultaneous separation of the three stable argon isotopes: ${}^{36}\hbox {Ar}$, ${}^{38}\textrm{Ar}$, and ${}^{40}\textrm{Ar}$. We also provide a detailed comparison of the experimental results with commercial process simulation software. This measurement of isotopic separation of argon is a significant achievement for the project, building on the success of the initial demonstration of isotopic separation of nitrogen using the same equipment in 2019.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Chalkboard: An Introduction to Electrochemical Separations

Chemical separations are a cornerstone of industrial manufacturing processes that generate products and services that have improved the standard of living for humans across the globe. To give some context as to how ubiquitous separations are in the modern world, they are involved in the production of fuels, medicines, clean water, fertilizers, materials used in semiconductor chip manufacturing, and other goods. A 2019 report by the National Academies of Sciences, Engineering, and Medicine highlights that chemical separations account for about 10 to 15% of energy use in the United States. Of the four broad sectors (residential, transportation, industry, and commerce) that use energy in the United States, industry has the largest use at 32% and about half of the energy use in industry hails from separations. It is likely that the transportation and residential sectors will experience significant decarbonization in the next 25 years with the proliferation of wind and solar energy sources coupled with electrochemical energy storage and electrification of vehicles. Finally, industrial decarbonization, on the other hand, is far more complex and challenging and it is imperative that future engineers and scientists work hard to devise alternative processes that can be powered on renewable electrons while generating little waste to produce the goods and services that make up our modern lives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Mixed Matrix Membranes by Using NH 2 ‐Functionalized UiO‐66 and [APTMS][AC] Ionic Liquid for the Separation of CO 2

The ever‐escalating CO 2 concentration in the atmosphere calls for accelerated development and deployment of carbon capture processes to reduce emissions. Mixed matrix membranes (MMMs), which are fabricated by incorporating the beneficial properties of highly selective inorganic fillers into a polymer matrix, have exhibited significant progress and the ability to enhance the performance of a membrane for gas separation. In this research, an amine‐based ionic liquid (IL) [APTMS][AC] was prepared, which has greater CO 2 affinity and greater solubility due to its amine moiety. The metal–organic framework (MOF) UiO‐66 with a multidimensional crystalline structure was used as a filler due to its appropriate porosity and tunable properties, and it was functionalized with NH 2 . MOFs were further modified with an IL to prepare UiO‐66@IL and UiO‐66‐NH 2 @IL, and MMMs incorporating each MOF were fabricated with the polymer Pebax‐1657. All the prepared membranes and MOFs were characterized to predict their separation efficiency. Several characterization techniques, namely, FTIR spectroscopy, XRD, and SEM, were used to successfully synthesize UiO‐66@IL and UiO‐66‐NH 2 @IL composites and confirmed proper dispersion and excellent polymer‒filler compatibility at filler loadings ranging from 0 to 30 wt.%. The separation performances were investigated, and the results showed that the incorporation of RTIL with the highly crystalline structure and large surface area of UiO‐66 enhanced the separation efficiency of the membrane. The permeability of CO 2 for all fabricated membranes continuously increased with increasing filler concentration, wherein the permeability was comparatively high for the UiO‐66‐NH 2 MMMs. The CO 2 /CH 4 selectivity improved by 35%, 54%, and 60%, respectively, for UiO‐66@IL, UiO‐66‐NH 2 , and UiO‐66‐NH 2 @IL MMMs compared to simple UiO‐66 for CO 2 /CH 4 and by 28%, 36%, and 63%, respectively, for CO 2 /N 2 , with an increase in filler loading in the MMMs.

Khalid, Hafiza Mamoona (ORCID:0009000135165855)↗

Bioprocessing Separations Consortium Three-Year Overview: Technical Advances, Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

09 BIOMASS FUELS↗

Bioprocessing Separations Consortium Three-Year Overview: Technical Advances Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extraction, Separation, and Production of High Purity Rare Earth Elements and Critical Minerals from Coal-Based and Related Resources

The general objectives of this project are to develop concepts for rare earth metal and critical mineral production from coal-based and related (minerals associated with coal) resources and incorporate them into a Technical Research Plan with an associated overall flow sheet. The project team has extensive expertise in market evaluation, mineral separation, leaching, chemical separations, alternative metallothermic reaction technology, electrowinning, and electrorefining that was critical to the success of the proposed project. The project included critical industrial partners needed for project success. The project team has extensive expertise in market evaluation, mineral separation, leaching, chemical separations, alternative reduction technology, electrowinning, and electrorefining as well as appropriate pilot-scale facilities to enable this project. The project encompassed broader opportunities for developing domestic resources of REE/CM materials for a more resilient, diverse, and secure supply chain for REE/CM materials with built-in redundancies and appropriate resource stockpiles. The production of REE/CM materials will help to revitalize and rebuild world-class American manufacturing capacity and the related workforce through new jobs and infrastructure. Furthermore, due to the nature and location of the production sites, economic growth in diverse communities of color and economically distressed areas will be cultivated. Finally, this technology can be applied to reuse and remediate coal waste tailings for REE/CM production.

01 COAL, LIGNITE, AND PEAT↗

Nanoconfined Interfaces for Highly Selective Separation of Critical Rare Earth Elements

Industrial demand for rare earth elements (REEs) has surged over the past three decades due to their unique properties that support sustainable energy and new technologies. Separating individual REEs is challenging and hazardous, typically done through liquid-liquid extraction. There is an urgent need for environmentally friendly and efficient separation technologies for REEs. Porous materials offer promising advances for sustainable REE separation via ion-selective capture. We hypothesize that REE separation can be efficiently achieved in reactive nanopores, such as Zr(IV) and Cr(III) metal-organic frameworks (MOFs), through surface functionalization. By integrating material synthesis, interfacial chemistry experiments, theory, computation, and machine learning, we gained insights into the chemical factors controlling REE speciation and their competitive adsorption on MOFs. Our findings show that these materials’ selectivity can be tuned by surface functionalization. The machine learning component addressed ion-specific diffusion based on MOF topology and chemistry.

36 MATERIALS SCIENCE↗

Leveraging Macrocyclic Chelators for Rare Earth Element Separations

The long-term objective of this project is to develop new, more energy-efficient and environmentally benign separations of the rare earth elements. The current approaches to separate the rare earth elements employ liquid-liquid extraction methods, using a biphasic mixture of aqueous and organic solvents containing different metal-binding agents. Although a significant amount of work has been carried out to develop new organic-phase extractants, significantly less has been executed for the design of aqueous complexants. Our approach to achieve better rare earth separations is to modify and optimize these aqueous complexants for achieving different rare earth-binding properties. Once synthesized, these new complexants were evaluated for more environmentally friendly and energy-efficient separations of the rare earth elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operation of Argonne's Liquid Salt-Liquid Metal Separation Testbed for U/TRU Product Processing

Argonne National Laboratory has constructed a liquid salt-liquid metal separation testbed for use in the development and advancement of cathode processing of U/TRU co‑deposits generated by pyroprocessing of used nuclear fuel. The U/TRU product recovered from the electrorefiner contains adhered and entrained salt that must be removed prior to consolidation of the U/TRU alloy for use in advanced reactor fuel fabrication. The bottom pour operation utilizes the low melting points of U/TRU co‑deposits and higher densities of molten metals compared to molten salts to separate and consolidate the U/TRU product. Argonne’s testbed is designed to support the development and optimization of bottom-pouring configurations for batch and semi-continuous operations, integration of process monitoring and control technologies, and determination of operational requirements for implementing in an industrial setting. Scoping tests were performed to demonstrate operational aspects of the testbed, including operation using single-pour spout and dual-pour spout configurations, effectiveness of salt containment and extent of salt vaporization, and the use of sensor probes to detect the location of the interface between the metal and salt phases during pouring. Recommendations for process optimization testing for further development of bottom pour processing to separate U/TRU alloys from adhered salt were made based on the results of scoping tests. Completing the recommended activities will increase the technical readiness level (TRL) of the liquid salt-liquid metal separation operation and consolidation of U/TRU alloys to support industrialization of pyroprocessing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BOTTLE: Hybrid Chemical-Mechanical Separation and Upcycling of Mixed Plastic Waste

The main objective of this project is to develop a hybrid mechanical-chemical recycling technology for multilayered and laminated plastics. We aimed to separate and upcycle up to more than 80% of the two main constituents of such structures, polyolefins and polyesters, for a significantly lower cost and at higher energetic efficiency and much larger throughputs than chemical recycling. At the end of the project, the team was able to: a) Develop an extrusion-based separation technology that resorts to polyester depolymerizaton and extraction and allows for more than 90% of the polyester to be separated in the melt from the main polyolefin stream. b) Depolymerize the separated PET to more than 90%, which facilitates its posterior repolymerization and guarantees its retention in the polymer value-chain. c) Develop a zeolite-induced extrusion-based technology able to conduct continuous catalytic cracking of polyolefins, including highly contaminated PCR streams, at temperatures as low as 350 OC. d) Show, using LCA/TEA analysis that the two technologies are much more advantageous techno-economically and over the material’s life cycle than existing recycling technologies.

36 MATERIALS SCIENCE↗

OGLE-2016-BLG-1227L: A Wide-separation Planet from a Very Short-timescale Microlensing Event

We present the analysis of the microlensing event OGLE-2016-BLG-1227. The light curve of this short-duration event appears to be a single-lens event affected by severe finite-source effects. Analysis of the light curve based on a single-lens single-source (1L1S) model yields very small values of the event timescale, t{sub E}∼3.5 days, and the angular Einstein radius, θ{sub E}∼0.009 mas, making the lens a candidate of a free-floating planet. Close inspection reveals that the 1L1S solution leaves small residuals with an amplitude of ΔI ≲ 0.03 mag. We find that the residuals are explained by the existence of an additional widely separated heavier lens component, indicating that the lens is a wide-separation planetary system rather than a free-floating planet. From Bayesian analysis, it is estimated that the planet has a mass of M{sub p}=0.79{sub −0.39}{sup +1.30} M{sub J} and it is orbiting a low-mass host star with a mass of M{sub host}=0.10{sub −0.05}{sup +0.17} M{sub ⊙} located with a projected separation of a{sub ⊥}=3.4{sub −1.0}{sup +2.1} au. The planetary system is located in the Galactic bulge with a line-of-sight separation from the source star of D{sub LS}=1.21{sub −0.63}{sup +0.96} kpc. The event shows that there is a range of deviations in the signatures of host stars for apparently isolated planetary lensing events and that it is possible to identify a host even when a deviation is subtle.

79 ASTRONOMY AND ASTROPHYSICS↗

Holography vs. Scale Separation

In this work, we point out a contradiction between holography and scale-separated AdS (i.e. parametrically large mass gap) in string theory, making the standard assumption that the holographic CFT describes the IR degrees of freedom on a brane that decouple from gravity. We show that the CFT can only decouple from gravity if the scalar potential in the dual AdS satisfies a certain criterion. Namely, there must exist a scalar field trajectory that follows the gradient of the scalar potential to the asymptotic region of the scalar field space in which limit $\partial_ϕ\ln(V)\partial_ϕ\ln(Λ_s)\leq2/(d-2)$, where $Λ_s$ is the quantum gravity cut-off. This condition, which generically implies lack of scale-separation, is satisfied in the standard examples of AdS/CFT. However, proposed attempts at achieving scale separation, such as DGKT, employ scalar potentials that violate this condition. We therefore conclude that the CFT duals of DGKT vacua cannot exist in string theory. Barring fine-tuning, our conclusions apply to other Ricci-flat flux compactifications including the KKLT scenario which relies on scale separation to obtain a metastable de Sitter uplift.

FOS: Physical sciences↗

Improved methods for separation of Cobalt, Manganese, Nickel, Lithium from Waste Lithium-ion Battery Scrap

Improved methods for separation of Cobalt, Manganese, Nickel, Lithium from Waste Lithium-ion Battery Scrap Mark L. Strauss1, John Klaehn1 Luis Diaz Aldana1, Tedd Lister1 Idaho National Laboratory1, Biological and Chemical Processing Department, Idaho Falls, Idaho 83415 ABSTRACT The current methods for the separation of Co, Mn, Ni, Li require that the leach solution have a pH between 2-4 in order to use many Cyanex cationic exchange products. Using a unique buffer solution for the reagent combined with the leachate of innovative electrochemical leaching process for lithium batteries demonstrates the separation is possible without a large of pH modification as other commercial hydrometallugical separation process. This research demonstrates a process that is more environmentally sustainable because the reagent consumption may be less. The corresponding McCable-Thiele diagrams and number of theoretical stages were determined to achieve a 80-90% purity of cobalt, manganese, nickel and lithium.

42 ENGINEERING↗

Development of Two-Phase Dense Fluid Expander for Advanced Cryogenic Air Separation and Low-Grade Heat Recovery

Cryogenic air separation represents the state-of-the-art technology to produce oxygen to feed coal gasification units. Given the maturity of this technology, it is difficult to identify opportunities to improve process efficiency and reduce the cost of the oxygen produced. However, Air Products conducted research and a feasibility investigation into the use of a two-phase (liquid-vapor) dense fluid expander (DFE) to improve the overall efficiency of cryogenic air separation. Demonstration of this novel concept was intended to allow two important process improvements: 1) elimination of the need for the DFE discharge to be single phase 2) expansion of the operating region of expanders in ASU service. Expanding the scope of turboexpander application beyond current application limits and traditional device designs would allow an increase in power recovery, and application of refrigeration and power recovery at new locations in process cycles would also enable the implementation of new process concepts. These new process concepts include power recovery from compression waste heat and refrigeration extraction and power recovery by replacing let-down valves with two-phase DFEs. Considering the maturity of cryogenic air separation, these new process options could represent a step change in power reduction and provide significant savings in operating costs. These new concepts would be particularly well-suited to large-scale oxygen production by cryogenic air separation and would enhance the economics of producing oxygen for use in coal gasification processes. Rotoflow, an Air Products business unit, manufactures dense fluid expanders in Pennsylvania for sites around the world. This project was executed in two phases, which are illustrated in Figure 1 below. Phase 1 consisted of a feasibility investigation of multiple applications of two-phase DFEs. In Phase 2, devices were identified, designed, fabricated and tested to explore the feasibility of commercial applications of DFEs operating in two-phase service. Engineering and testing were performed by personnel in Air Products’ Rotoflow business unit, with coordination with other Air Products business units.

01 COAL, LIGNITE, AND PEAT↗

Process for component separation utilizing miscibility depression near a freezing point

A process for separating a mixture of components is disclosed. A liquid mixture is provided to a separation vessel substantially near a temperature at which a product component freezes. The liquid mixture comprises the product component and a carrier component. The product component and the carrier component are essentially immiscible substantially near the temperature. The liquid mixture is separated into two or more phases, the two or more phases comprising a product component-rich liquid phase and a product component-depleted liquid phase. In this manner, a mixture of components is separated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗