Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Broad frequency tuning of a Nb$_{3}$Sn superconducting microwave cavity for dark matter searches

We demonstrate a novel broad-frequency tuning mechanism for superconducting microwave cavities designed for dark matter searches. Using a Nb$_3$Sn-coated cigar-shaped cavity operating at approximately 9 GHz, we achieve continuous frequency tuning exceeding 1 GHz by mechanically separating the two cavity halves: a "tuning-by-opening" technique. Finite-element method simulations predict that radiative losses do not degrade the quality factor even for large openings, as a closed cavity with an intrinsic quality factor of $10^7$ maintains this value for apertures up to 9 mm, corresponding to a tuning range from 9.0 to 7.5 GHz. Experimental validation using both copper ring spacers and a continuous sliding mechanism confirms $Q_0$ values exceeding the dark matter quality factor across the entire explored frequency range, despite mechanical imperfections and film non-uniformities. This tuning approach avoids inserting elements into the resonant volume, making it particularly suitable for high-Q superconducting cavities in axion haloscope experiments and readily applicable to REBCO-based implementations capable of operating in multi-tesla magnetic fields.

Maiello, D. [Padua U.; INFN, Padua] (ORCID:0009000↗

Calculation of Compressible Flows past Aerodynamic Shapes by Use of the Streamline Curvature

A simple approximate method is given for the calculation of isentropic irrotational flows past symmetrical airfoils, including mixed subsonic-supersonic flows. The method is based on the choice of suitable values for the streamline curvature in the flow field and the subsequent integration of the equations of motion. The method yields limiting solutions for potential flow. The effect of circulation is considered. A comparison of derived velocity distributions with existing results that are based on calculation to the third order in the thickness ratio indicated satisfactory agreement. The results are also presented in the form of a set of compressibility correction rules that lie between the Prandtl-Glauert rule and the von Karman-Tsien rule (approximately). The different rules correspond to different values of the local shape parameter square root sign YC sub a, in which Y is the ordinate and C sub a is the curvature at a point on an airfoil. Bodies of revolution, completely supersonic flows, and the significance of the limiting solutions for potential flow are also briefly discussed.

Perl, W↗

Sensitivity Analysis of Flutter Response of a Wing Incorporating Finite-Span Corrections

Flutter analysis of a wing is performed in compressible flow using state-space representation of the unsteady aerodynamic behavior. Three different expressions are used to incorporate corrections due to the finite-span effects of the wing in estimating the lift-curve slope. The structural formulation is based on a Rayleigh-Pitz technique with Chebyshev polynomials used for the wing deflections. The aeroelastic equations are solved as an eigen-value problem to determine the flutter speed of the wing. The flutter speeds are found to be higher in these cases, when compared to that obtained without accounting for the finite-span effects. The derivatives of the flutter speed with respect to the shape parameters, namely: aspect ratio, area, taper ratio and sweep angle, are calculated analytically. The shape sensitivity derivatives give a linear approximation to the flutter speed curves over a range of values of the shape parameter which is perturbed. Flutter and sensitivity calculations are performed on a wing using a lifting-surface unsteady aerodynamic theory using modules from a system of programs called FAST.

Issac, Jason Cherian↗

Elastic scattering of low-energy electrons by nitromethane

In this work, we present integral, differential, and momentum transfer cross sections for elastic scattering of low-energy electrons by nitromethane, for energies up to 10 eV. We calculated the cross sections using the Schwinger multichannel method with pseudopotentials, in the static-exchange and in the static-exchange plus polarization approximations. The computed integral cross sections show a {pi}* shape resonance at 0.70 eV in the static-exchange-polarization approximation, which is in reasonable agreement with experimental data. We also found a {sigma}* shape resonance at 4.8 eV in the static-exchange-polarization approximation, which has not been previously characterized by the experiment. We also discuss how these resonances may play a role in the dissociation process of this molecule.

74 ATOMIC AND MOLECULAR PHYSICS↗

Anatomy of bispectra in general single-field inflation — Modal expansions

We discuss bispectra of single-field inflationary models described by general Lorentz invariant Lagrangians that are at most first order in field derivatives, including the fast-roll models investigated by Noller and Magueijo. Based on a factor analysis, we identify the least correlated basic contributions to the general shape and show quantitatively which templates provide a good approximation. We compute how relative contributions of basic shapes to the total bispectrum scale as slow roll is relaxed. To enable future comparison with CMB observations, we provide a modal expansion of these non-separable bispectra in Fourier space, employing the formalism by Fergusson et al. Convergence is rapid, usually better than ninety-five percent with less than thirty modes, due to the smoothness of these primordial shapes. Truncated polynomial modal expansions have restrictions, which we highlight using an example with slow convergence. The particular shape originates from particle production during inflation (common in trapped inflation) and entails both localized and oscillatory features. We show that this shape can be recovered efficiently using a Fourier basis and outline the prospect of future model parameter extraction and N-body simulations based on modal techniques.

79 ASTRONOMY AND ASTROPHYSICS↗

Description of high-power laser radiation in the paraxial approximation

We consider the feasibility of an adequate description of a laser pulse of arbitrary shape within the framework of the paraxial approximation. In this approximation, using a parabolic equation and an expansion in the small parameter, expressions are obtained for the field of a sufficiently intense laser radiation given in the form of axially symmetric Hermite – Gaussian beams of arbitrary mode and arbitrary polarisation. It is shown that in the case of sufficiently short pulses, corrections to the transverse components of the laser field are the first-order rather than the secondorder quantities in the expansion in the small parameter. The peculiarities of the description of higher-mode Hermite – Gaussian beams are outlined. (light wave transformation)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microscopic description of large-amplitude shape-mixing dynamics with inertial functions derived in local quasiparticle random-phase approximation

On the basis of the adiabatic self-consistent collective coordinate method, we develop an efficient microscopic method of deriving the five-dimensional quadrupole collective Hamiltonian and illustrate its usefulness by applying it to the oblate-prolate shape coexistence/mixing phenomena in proton-rich {sup 68,70,72}Se. In this method, the vibrational and rotational collective masses (inertial functions) are determined by local normal modes built on constrained Hartree-Fock-Bogoliubov states. Numerical calculations are carried out using the pairing-plus-quadrupole Hamiltonian including the quadrupole-pairing interaction within the two major-shell active model spaces both for neutrons and protons. It is shown that the time-odd components of the moving mean-field significantly increase the vibrational and rotational collective masses in comparison with the Inglis-Belyaev cranking masses. Solving the collective Schroedinger equation, we evaluate excitation spectra, quadrupole transitions, and moments. The results of the numerical calculation are in excellent agreement with recent experimental data and indicate that the low-lying states of these nuclei are characterized as an intermediate situation between the oblate-prolate shape coexistence and the so-called {gamma} unstable situation where large-amplitude triaxial-shape fluctuations play a dominant role.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probability Density Functions of Observed Rainfall in Montana

The question of whether a rain rate probability density function (PDF) can vary uniformly between precipitation events is examined. Image analysis on large samples of radar echoes is possible because of advances in technology. The data provided by such an analysis easily allow development of radar reflectivity factors (and by extension rain rate) distribution. Finding a PDF becomes a matter of finding a function that describes the curve approximating the resulting distributions. Ideally, one PDF would exist for all cases; or many PDF's that have the same functional form with only systematic variations in parameters (such as size or shape) exist. Satisfying either of theses cases will, validate the theoretical basis of the Area Time Integral (ATI). Using the method of moments and Elderton's curve selection criteria, the Pearson Type 1 equation was identified as a potential fit for 89 percent of the observed distributions. Further analysis indicates that the Type 1 curve does approximate the shape of the distributions but quantitatively does not produce a great fit. Using the method of moments and Elderton's curve selection criteria, the Pearson Type 1 equation was identified as a potential fit for 89% of the observed distributions. Further analysis indicates that the Type 1 curve does approximate the shape of the distributions but quantitatively does not produce a great fit.

Larsen, Scott D.↗

The detection of molecular gas in the ring galaxy Arp 143

We have used the NRAO 12 m telescope to map the inner 10 kpc of NGC 2445, the ring galaxy in Arp 143, in CO-12(J = 1-0). Emission is peaked near the ring galaxy nucleus, but we find evidence for an additional asymmetric and extended CO component. This extended CO distribution is consistent with an approximately 8 kpc diameter crescent-shaped ring of molecular gas, similar to the one seen in H I, accounting for approximately half of the total CO flux. Assuming this distribution, we derive a total H2 mass for NGC 2445 of 0.4-2.4 x 10(exp 10) solar mass, depending on whether a Galactic or low-metallicity Large Magellanic Cloud (LMC) conversion factor is used, and an H2/H I mass ratio between 0.9 and 5. The ring is experiencing low rates of massive star formation despite very high gas column densities. We find that the gas surface density exceeds the critical threshold for star formation throughout the ring, even without a possible contribution from a significant molecular component. The absence of vigorous star formation is most simply understood in terms of its youth (approximately 30 Myr): massive stars have not had time to form in large numbers. Our results support the interpretation that NGC 2445 is a nascent ring galaxy, seen prior to its ring starburst phase.

Higdon, James L.↗

Analysis of Gaspra lightcurves using Galileo shape and photometric models

Galileo-based models for the shape of 951 Gaspra and the global-average photometric behavior of its surface have been used to model a representative subset of the asteroid's telescopic lightcurves. Fitting the synthetic lightcurves to the observed timing of lightcurve extrema, and knowing the orientation of Gaspra's axes at the time of the Galileo flyby, leads to a sidereal rotation period for the asteroid of 7.042024 +/- 0.000020 hr, a slight change from the period reported by Magnusson et al. (1992). Initially, the shapes, amplitudes, and absolute photometry of the synthetic and observed lightcurves agree with each other to within 0.05-0.1 mag. Small modifications to the Gaspra shape model on sides of the asteroid poorly imaged by Galileo (changes of 700 m or less in the southern hemisphere at longitudes 90 deg-270 deg W) reduce the typical discrepancies to approximately 0.05 mag in lightcurve shape and less than 0.03 mag in absolute photometry. The result demonstrates that Earth-based lightcurves can be used to refine the shape of a spacecraft-imaged irregular object in areas that are poorly constrained by the spacecraft observations. The consistency and phase-angle dependence of the Galileo-based model for Gaspra photometry, supports the accuracy of the absolute calibration of the Galileo SSI camera, and confirms the Earth-based determination of the V-filter geometric albedo of the asteroid (0.22 +/- 0.03; Tholen et al., submitted for publication). Remaining discrepancies between the synthetic and observed lightcurves show no indication of systematic latitudinal variations in albedo and also cannot be explained entirely by isolated albedo spots. These discrepancies are most likely caused by (1) small, remaining, hard-to-constrain errors in the Gaspra shape model and/or (2) moderate variations in macroscopic roughness across the asteroid's surface, in particular making longitudes 130 deg to 300 deg W moderately rougher than the opposite hemisphere.

Simonelli, Damon P.↗

Modeling error PDF optimization based wavelet neural network modeling of dynamic system and its application in blast furnace ironmaking

In general, the modeling errors of dynamic system model are a set of random variables. The traditional performance index of modeling such as means square error (MSE) and root means square error (RMSE) can not fully express the connotation of modeling errors with stochastic characteristics both in the dimension of time domain and space domain. Therefore, the probability density function (PDF) is introduced to completely describe the modeling errors in both time scales and space scales. Based on it, a novel wavelet neural network (WNN) modeling method is proposed by minimizing the two-dimensional (2D) PDF shaping of modeling errors. First, the modeling error PDF by the tradional WNN is estimated using data-driven kernel density estimation (KDE) technique. Then, the quadratic sum of 2D deviation between the modeling error PDF and the target PDF is utilized as performance index to optimize the WNN model parameters by gradient descent method. Since the WNN has strong nonlinear approximation and adaptive capability, and all the parameters are well optimized by the proposed method, the developed WNN model can make the modeling error PDF track the target PDF, eventually. Simulation example and application in a blast furnace ironmaking process show that the proposed method has a higher modeling precision and better generalization ability compared with the conventional WNN modeling based on MSE criteria. Furthermore, the proposed method has more desirable estimation for modeling error PDF that approximates to a Gaussian distribution whose shape is high and narrow.

Modelling↗

Shape transition of unstrained flattest single-walled carbon nanotubes under pressure

Single walled carbon nanotube's (SWCNT's) cross section can be flattened under hydrostatic pressure. One example is the cross section of a single walled carbon nanotube successively deforms from the original round shape to oval shape, then to peanut-like shape. At the transition point of reversible deformation between convex shape and concave shape, the side wall of nanotube is flattest. This flattest tube has many attractive properties. In the present work, an approximate approach is developed to determine the equilibrium shape of this unstrained flattest tube and the curvature distribution of this tube. Our results are in good agreement with recent numerical results, and can be applied to the study of pressure controlled electric properties of single walled carbon nanotubes. The present method can also be used to study other deformed inorganic and organic tube-like structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Visualization and 3D Mesh Generation for ASSEMBLERS Range of Motion

In an effort to create a base and foundation for ASSEMBLERS with an informed layout, data representing the range of motion of varying heights of Stewart platforms were analyzed. 3D shapes were generated first to be approximately representative of these data in the form of rotationally symmetric shells, making use of 2D alpha shapes to create a border that did not account for asymmetry inherent in the true range of motion. Further work was performed to generate mesh files more fully representative of reach, creating 3D alpha shapes based directly on point clouds generated from uniformly random platform positions. These shapes were initially not representative of the entire range of motion of a platform stack due to the low likelihood of the most extreme positions being added to a given point cloud but were more representative of the asymmetry inherent in the possible positions of a Stewart platform as they no longer relied on a single 2D contour. The same algorithm for generating 3D alpha shapes was then applied to point clouds designed to represent extreme positions, generating larger smooth shells with six clear planes of symmetry. All shells were converted to STLs to aid in further modeling of range of motion for base layouts and in visualizing reachable area for varying stack heights, successfully creating closed shells representative of typical and extreme positions for platform stacks of varying heights.

Jonah DeGuire Vanke↗

Deterministic and Monte Carlo Nuclear Data Adjustment Methods [Slides]

For the Bayesian Monte Carlo methodology, a need to understand convergence of the posterior moments as a function of the number of parameter realizations is required. In high-dimensional systems, it can be very costly to sample entire parameter space and perform functional evaluation for every realization. Bayesian Monte Carlo allows one to relax the GLLS approximations of model linearity and prior/posterior PDF shape. The Bayesian Stochastic Collocation Method is a deterministic approach to “sample” the parameter space. It allows one to relax the GLLS approximations of model linearity and posterior PDF shape. Higher-order posterior moments (i.e., skewness, kurtosis, etc.) can be studied through polynomial expansion. Tensor product quadrature scales poorly and can use sparse grid quadrature methods.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Efficient algorithm for generating spectra using line-by-lne methods

A method is presented for efficient generation of spectra using line-by-line approaches. The only approximation is replacing the line shape function with an interpolation procedure, which makes the method independent of the line profile functional form. The resulting computational savings for large number of lines is proportional to the number of frequency points in the spectral range. Therefore, for large-scale problems the method can provide speedups of two orders of magnitude or more. A method was presented to generate line-by-line spectra efficiently. The first step was to replace the explicit calculation of the profile by the Newton divided-differences interpolating polynomial. The second step is to accumulate the lines effectively reducing their number to the number of frequency points. The final step is recognizing the resulting expression as a convolution and amenable to FFT methods. The reduction in computational effort for a configuration-to-configuration transition array with large number of lines is proportional to the number of frequency points. The method involves no approximations except for replacing the explicit profile evaluation by interpolation. Specifically, the line accumulation and convolution are exact given the interpolation procedure. Furthermore, the interpolation makes the method independent of the line profile functional form contrary to other schemes using FFT methods to generate line-by-line spectra but relying on the analytic form of the profile Fourier transform. Finally, the method relies on a uniform frequency mesh. For non-uniform frequency meshes, however, the method can be applied by using a suitable temporary uniform mesh and the results interpolated onto the final mesh with little additional cost.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fixed gain and adaptive techniques for rotorcraft vibration control

The results of an analysis effort performed to demonstrate the feasibility of employing approximate dynamical models and frequency shaped cost functional control law desgin techniques for helicopter vibration suppression are presented. Both fixed gain and adaptive control designs based on linear second order dynamical models were implemented in a detailed Rotor Systems Research Aircraft (RSRA) simulation to validate these active vibration suppression control laws. Approximate models of fuselage flexibility were included in the RSRA simulation in order to more accurately characterize the structural dynamics. The results for both the fixed gain and adaptive approaches are promising and provide a foundation for pursuing further validation in more extensive simulation studies and in wind tunnel and/or flight tests.

Roy, R. H.↗

Remote Sensing Analyses of Localized Lunar Dark Mantle Deposits

Near-infrared spectral reflectance data were obtained for 12 localized lunar dark mantle deposits. The dominant feature in these data is the Fe(+2) absorption band in the 1.0 micron wavelength region. In order to emphasize differences in the characteristics of this absorption band, a straight-line continuum was removed from these spectra. On the basis of the depth and shape of this 1.0 micron absorption band, these spectra can be separated into three groups. Group 1 includes spectra from Grimaldi pyroclastics, Franklin floor, Atlas dhc 1, and Archimedes south rim. Absorption band centers in this group are located near 0.93 to 0.95 microns, and depths are approximately 4 to 5%. The shape of the 1.0 micron band in these spectra can be described as check-like, with a straight, steep short-wavelength edge and a straight longer-wavelength edge with a shallower slope. Group 2 is comprised of spectra from Aristoteles East 1 and 2, Rima Fresnel and Atlas dhc 2. These 1.0 micron bands are centered near 0.96 micron, and are deeper (7%) and more symmetrical than those in Group 1. Spectra in group 3 are represented by that of J. Herschel; which have a moderately deep (7%), broad absorption band in the 1.0 micron wavelength region.

Gaddis, L. R.↗

Observations from varying the lift and drag inputs to a noise prediction method for supersonic helical tip speed propellers

Previous comparisons between calculated and measured supersonic helical tip speed propeller noise show them to have different trends of peak blade passing tone versus helical tip Mach number. It was postulated that improvements in this comparison could be made first by including the drag force terms in the prediction and then by reducing the blade lift terms at the tip to allow the drag forces to dominate the noise prediction. Propeller hub to tip lift distributions were varied, but they did not yield sufficient change in the predicted lift noise to improve the comparison. This result indicates that some basic changes in the theory may be needed. In addition, the noise predicted by the drag forces did not exhibit the same curve shape as the measured data. So even if the drag force terms were to dominate, the trends with helical tip Mach number for theory and experiment would still not be the same. The effect of the blade shock wave pressure rise was approxmated by increasing the drag coefficient at the blade tip. Predictions using this shock wdave approximation did have a curve shape similar to the measured data. This result indicates that the shock pressure rise probably controls the noise at supersonic tip speed and that the linear prediction method can give the proper noise trend with Mach number.

Dittmar, J. H.↗