Search NASA⌕ Search

SEARCH · Search NASA

Results for “site conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Uncertainties in Predicting Rice Yield by Current Crop Models Under a Wide Range of Climatic Conditions

Predicting rice (Oryza sativa) productivity under future climates is important for global food security. Ecophysiological crop models in combination with climate model outputs are commonly used in yield prediction, but uncertainties associated with crop models remain largely unquantified. We evaluated 13 rice models against multi-year experimental yield data at four sites with diverse climatic conditions in Asia and examined whether different modeling approaches on major physiological processes attribute to the uncertainties of prediction to field measured yields and to the uncertainties of sensitivity to changes in temperature and CO2 concentration [CO2]. We also examined whether a use of an ensemble of crop models can reduce the uncertainties. Individual models did not consistently reproduce both experimental and regional yields well, and uncertainty was larger at the warmest and coolest sites. The variation in yield projections was larger among crop models than variation resulting from 16 global climate model-based scenarios. However, the mean of predictions of all crop models reproduced experimental data, with an uncertainty of less than 10 percent of measured yields. Using an ensemble of eight models calibrated only for phenology or five models calibrated in detail resulted in the uncertainty equivalent to that of the measured yield in well-controlled agronomic field experiments. Sensitivity analysis indicates the necessity to improve the accuracy in predicting both biomass and harvest index in response to increasing [CO2] and temperature.

crop-model ensembles↗

A 100+ RON Gasoline Blendstock for High Efficiency, Low Emission Vehicles Engines - CRADA 493 (Final Report)

This study aimed at demonstrating production of a 100+RON gasoline fraction from a linear olefins feedstock to help improve further the viability and flexibility of the Pacific Northwest National Laboratory/ LanzaTech alcohol-to-jet (ATJ) patented process that converts ethanol from LanzaTech’s syngas fermentation process to low aromatic jet-range iso-paraffins. To achieve a high RON gasoline and ultimately a 100+RON, the technical approach consisted of converting the linear olefins into an iso-olefins rich mixture and then oligomerizing the iso-olefins rich mixture into high RON compounds in a single bed loaded with an acid catalyst that allows conversion at low reaction temperature. Three families of acid catalysts labeled as type A, B and C were investigated for the single-bed conversion of linear olefins into high RON gasoline range compounds. The effects of the nature of the catalyst, acid sites concentration and operating conditions were investigated. Fuel properties measurements and engine testing were conducted for the most promising catalyst. For type A catalysts, we demonstrated that the conversion increases with the increase of the Brönsted acid site concentration and that lower reaction temperature favors the formation of desired highly branched compounds. The highest dRON obtained with type A catalyst was equal to 94 (from NMR and IQT). Type B catalysts appear very effective for producing dimethyl-olefins compounds when operating at low reaction temperature (i.e., < 100°C). The highest dRON obtained with type B catalyst was equal to 92. The results suggest that type B catalysts are less favorable to internal conversion of linear olefins into iso-olefins compared to type A catalysts which leads to the formation of a gasoline blendstock with a lower dRON. A Type C catalyst that is less commonly used for production of gasoline range compounds from linear olefins was investigated due to its ability to favor conversion of linear olefins into iso-olefins. Compared to type A and type B catalyst, type C favors the formation of highly branched compounds (i.e., with 3+ methyl groups) in the gasoline range. Indeed, a gasoline blendstock containing about 33 wt.% of highly branched compounds was produced with type C catalyst while maintaining a high linear olefins conversion (i.e., 70%). A large quantity of this gasoline blendstock was produced and fuel properties measurements including engine testing for Research Octane Number (RON), Motor Octane Number (MON) and octane sensitivity (S) were conducted. A high RON = 97, MON = 82.7, S =14.3, AKI = 90 and HoV = 334.1kJ/kg were measured. While a RON of 100 was not achieved, the fuel properties of the gasoline blendstock are very acceptable as compared to current premium gasoline. Overall, these results highlight the potential for producing a high RON/ premium gasoline blendstock starting from a linear olefins feedstock.

02 PETROLEUM↗

Monitoring Vegetation Impacts of Night Penning in Idaho and Oregon Grazing Allotments Using Remote Sensing

The practice of night penning, which involves corralling livestock into a fenced, secure area overnight, aims to safeguard animals from predators. Although this method has proven successful in minimizing interactions between livestock and wildlife, the extent of its impact on vegetation communities is still being explored. In this study, we used the Rangeland Analysis Platform (RAP), which aggregates spatially distributed values of vegetation composition, cover, and productivity from the Landsat missions, to quantify the effects of night penning on rangeland vegetation communities. We identified control sites that had similar topographic characteristics to night pen sites used by ranchers in Idaho and Oregon. We then quantified and compared changes in annual net primary productivity (NPP) between night pen and control sites. Our study found that RAP NPP data did not show a noticeable difference between control sites and night penning sites. When analyzed quantitatively, night pen sites showed variability in NPP before and after night penning; however, there were few discernible differences between night pen sites and control sites, suggesting that climate conditions can have more of an effect on NPP measurements compared to land management decisions. In the summer of 2024, field crews from the Natural Resource Ecology Laboratory collected biomass data from these rangeland sites, and this will be used to compare and validate RAP products while continuing to investigate the effects of night penning.

Truman Anarella↗

Changes in active-site geometry on X-ray photoreduction of a lytic polysaccharide monooxygenase active-site copper and saccharide binding

The recently discovered lytic polysaccharide monooxygenases (LPMOs) are Cu-containing enzymes capable of degrading polysaccharide substrates oxidatively. The generally accepted first step in the LPMO reaction is the reduction of the active-site metal ion from Cu 2+ to Cu + . Here we have used a systematic diffraction data collection method to monitor structural changes in two AA9 LPMOs, one from Lentinus similis (LsAA9_A) and one from Thermoascus auranti­acus (TaAA9_A), as the active-site Cu is photoreduced in the X-ray beam. For LsAA9_A, the protein produced in two different recombinant systems was crystallized to probe the effect of post-translational modifications and different crystallization conditions on the active site and metal photoreduction. We can recommend that crystallographic studies of AA9 LPMOs wishing to address the Cu 2+ form use a total X-ray dose below 3 × 10 4 Gy, while the Cu + form can be attained using 1 × 10 6 Gy. In all cases, we observe the transition from a hexa­coordinated Cu site with two solvent-facing ligands to a T-shaped geometry with no exogenous ligands, and a clear increase of the θ 2 parameter and a decrease of the θ 3 parameter by averages of 9.2° and 8.4°, respectively, but also a slight increase in θ T . Thus, the θ 2 and θ 3 parameters are helpful diagnostics for the oxidation state of the metal in a His-brace protein. On binding of cello-oligosaccharides to LsAA9_A, regardless of the production source, the θ T parameter increases, making the Cu site less planar, while the active-site Tyr—Cu distance decreases reproducibly for the Cu 2+ form. Thus, the θ T increase found on copper reduction may bring LsAA9_A closer to an oligosaccharide-bound state and contribute to the observed higher affinity of reduced LsAA9_A for cellulosic substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Methodological Overview of Seismic Analysis for Nuclear Event Detection

Underground explosions generate potentially detectable signatures, including energy waves that travel through the Earth’s subsurface (i.e., seismic waves), low-frequency sound waves (i.e., infrasound and hydroacoustic waves), and radioactive gases and/or particles that might leak from the test cavity (if the event was nuclear). There can also be intelligence indicators of a test, such as observations of modified patterns of life and activity at a suspected test site. If all of these detectable signatures and intelligence indicators are present and self-consistent, then analysts have high confidence in classifying a signature generating event as an explosion. However, because only partial information about an event is likely to be available, determining whether an event was natural (e.g., an earthquake or landslide) or manmade (e.g., a chemical or nuclear explosion) is much more challenging. This primer describes how one category of event signatures—seismic signatures—can augment event analyses. While universities and government organizations have generated detailed technical descriptions of seismic analytic techniques, we seek to translate seismic event analysis for a broad, non-technical audience. When the geologic conditions near an event are well-characterized, seismic data can be used to calculate critical information, such as event location and depth, with relatively high accuracy. Moreover, specific features within seismic datasets can help determine whether an event was an explosion. However, a key challenge in seismic analysis is that geologic site conditions are often poorly characterized, complicating the ability to discern the true nature of the event. To overcome this challenge, geologists answer a series of questions (discussed in section 1) to guide seismic event analysis and determine the most probable nature of an event. As more information is gathered during each analytic step, confidence grows regarding the nature of the event. Section 2 addresses uncertainties in seismic analysis and the vital nature of high-fidelity geologic data for accurate seismic event analysis.

58 GEOSCIENCES↗

Worldwide benchmarking of cost-effective radiometers for direct and diffuse irradiance

Solar energy projects can benefit from direct normal irradiance (DNI) and diffuse horizontal irradiance (DHI) measurements during all project phases. Several commercial measurement systems for DNI and DHI are available. Sun trackers with pyranometers and pyrheliometers can provide highly accurate measurements but are often impractical in solar energy applications. For less expensive and more robust sensors, it is often unclear which accuracy can be expected under a project site's specific atmospheric conditions. We address this challenge through our dedicated experimental comparison of relevant sensor systems (rotating shadowband irradiometer [short RSI], Delta-T SPN1, EKO MS-90, PyranoCam, Sunto CaptPro, Kipp & Zonen CSD3) at up to six sites worldwide. The RSI systems (rRMSD 3 to 8.6%, DNI; 4.8 to 7.6%, DHI) and PyranoCam (rRMSD 2.6 to 5.2%, DNI; 4.4 to 5.8%, DHI) exhibit similar error metrics and are the most accurate systems in the test. Delta-T SPN1 and EKO MS-90 (rRMSD 6.8 to 15%, DNI; 10.6 to 20.1%, DHI) but especially Kipp & Zonen CSD3 and Sunto CaptPro show significant deviations (rRMSD 17.7 to 20%, DNI; 33 to 58%, DHI). We evaluate the influence of relevant atmospheric parameters on the sensors' accuracies by a rather unique measurement setup. MS-90's DNI errors depend on DNI itself, with overestimations for low reference DNI. The deviations of SPN1's DHI and DNI measurements increase sharply in situations with high circumsolar irradiance. Also CaptPro and CSD3's increased measurement errors are related to circumsolar irradiance. For RSI and PyranoCam, only moderate influences on the measurements are identified, indicating a general applicability of these instruments.

14 SOLAR ENERGY↗

An Overview of Non-LWR Vessel Cooling Systems for Passive Decay Heat Removal (Technical Letter Final Report)

The following report provides a technical review of various reactor vessel cooling system (VCS) concepts under consideration for decay heat removal (DHR) in non-light water advanced reactor designs. This review focuses on ex-vessel designs, including the Reactor Cavity Cooling System (RCCS), the Reactor Vessel Auxiliary Cooling System (RVACS), and hybrid iterations, using both air and water cooling to achieve their heat removal function. Based on a literature review of publicly available sources published between 1979 and 2021, a technical summary is presented detailing existing and planned VCS design options, their applicability to specific reactor type, and review of authored research and development studies. Following an assessment of the availability of data and modeling tools, an evaluation was performed analyzing their likely performance during normal, degraded, and accident conditions, including reliability, stability, and longevity. With renewed consideration of air-based DHR systems by some US vendors, there is a need to fully understand the complexities inherent to natural circulation systems, and more importantly, how they may influence safety-related heat removal functions and system performance. For DHR systems that rely on air-based mode of cooling, this entails quantification of the impacts of low flow conditions during start-up, relative elevations of inlet and outlet ducts for below-grade installations, effects of the use of multiple parallel chimneys for redundancy, and impact of weather conditions at the plant site. For systems relying on water-based mode cooling, reliance on limited coolant inventory in an event of pipe break or extended duration accident scenarios, sensitivities related to stability of boiling flow and heat transfer conditions, and quantification of full-scale structural vibrations on balance of plant structures are among the complicating factors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Visible Light Photolysis at Single Atom Sites in Semiconductor Perovskite Oxides

Designing catalysts with well-defined active sites with chemical functionality responsive to visible light has significant potential for overcoming scaling relations limiting chemical reactions over heterogeneous catalyst surfaces. Visible light can be leveraged to facilitate the removal of strongly bound species from well-defined single cationic sites (Rh) under mild conditions (323 K) when they are incorporated within a photoactive perovskite oxide (Rh-doped SrTiO 3 ). CO, a key intermediate in many chemistries, forms stable geminal dicarbonyl Rh complexes (Rh + (CO) 2 ), that could act as site blockers or poisons during a catalytic cycle. For the first time, we demonstrate that CO removal can occur at mild temperatures (323 K) under low-energy red light (635 nm) irradiation, which is not possible for supported isolated-site Rh catalysts (0.2 wt % Rh/γ-Al 2 O 3 ). Photolysis of supported Rh + (CO) 2 complexes (e.g., 0.2 wt % Rh/γ-Al 2 O 3 ) has been demonstrated but is limited to high energy UV photons. Rigorous kinetic experiments elucidate disparate mechanisms for CO photodepletion from Rh-doped SrTiO 3 and supported isolated site Rh/γ-Al 2 O 3 . CO photodepletion from supported isolated site Rh/γ-Al 2 O 3 involves a direct metal to ligand charge transfer mechanism, whereas Rh-doped SrTiO 3 is governed by electron–hole pair formation in the perovskite. In this work, we show that under visible, low-energy red light, surface Rh species in Rh-doped SrTiO 3 introduce midgap energy states above the valence band that facilitate electronic excitations leading to surface CO removal. Isolated Rh sites in Rh-doped SrTiO 3 also exhibit exceptional stability under multiple CO photodepletion cycles. Overall, incorporating single sites into photoactive perovskite oxides is an effective strategy to influence surface chemistries with visible light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Responses of a Modular Floating Wind TLP of MarsVAWT Supporting a 10 MW Vertical Axis Wind Turbine

Offshore floating wind foundations supporting a large wind turbine require a large yard facility or significant facility upgrades for their fabrication. To overcome the cost increase associated with facility upgrades, an innovative lightweight modular floating foundation is developed. The foundation comprises multiple modules to enable their assembly on water, offering many benefits and expanding fabrication options for a reduction in the overall cost of the platform. In this paper, the foundation modules and their assembly are briefly described, and an analysis of the platform’s dynamic responses is presented. The modular foundation includes a modular and lightweight tension leg platform (TLP) called “MarsVAWT” which supports a Darrieus 10 MW vertical axis wind turbine (VAWT). The platform is moored with highly pretensioned wire rope tendons. The responses of the platform are analyzed in the time domain in a semi-coupled manner under the turbine operating and parked conditions for an offshore site in the US Northeast. The tower base shear forces and bending moments increase considerably with the combination of wind and waves, compared to those with wind only. The tendon tensions on the weatherside in the operating condition at high wind speeds are comparable to the values of the 50-year extreme (parked). The tendon tension increases are highly correlated to the platform pitch, as well as the horizontal and vertical velocities and vertical acceleration at the tendon porch. The modular platform performances and tendon designs are confirmed to comply with industry standards and practices.

Boo, Sung Youn↗

Future Response of Coastal Wetlands to Environmental Stresses: Algorithm Comparison of Numerical Models

Coastal wetlands are a critical component of the earth system that strongly influence the global water and biogeochemical cycles. They are also likely important sentinel of climate change. Because eco-geomorphological processes have long been recognized to be important for coastal wetland survival under accelerated sea-level rise (SLR), many eco-geomorphology models have been developed to assess the impact of climate change on coastal wetlands. Although these models differ substantially in complexity and numerical methods, few studies have investigated the algorithm-level uncertainties in these models. In this study, we developed a multiple-algorithm model framework of coastal wetlands that represents coastal hydrodynamics (such as water level, significant wave height and bottom shear stress) and four eco-geomorphological processes: mineral accretion, organic matter accretion, storm surge erosion and landward migration. We validated the model at three representative coastal wetland sites (Venice Lagoon, Plum Island Estuary and Hunter Estuary) for hydrodynamics, mineral accretion and organic matter accretion. Through model-data comparison, we showed that the model can well capture the dynamics of hydrodynamical and eco-geomorphological conditions in the study sites. Importantly, analysis of the multiple-algorithm simulations suggests that differences in the process representation of mineral and organic matter accretion may contribute to the recent contradicting predictions of coastal wetland evolution under accelerated SLR.

54 ENVIRONMENTAL SCIENCES↗

Recent land cover changes in the Southwestern US lead to an increase in surface temperature

The increase in large-scale land cover change (LCC) in recent decades, particularly in response to climate-driven disturbances, has potential to impact local and regional changes in climate due to modification of carbon sources and sinks, albedo, surface roughness and energy fluxes. Using observational data, we predict the impact of two of the most extensive LCCs occurring in the Southwestern US: drought-induced tree mortality and shrub encroachment into grasslands, on surface temperature. We developed a new energy balance method that extracts the biophysical responses to environmental conditions, to predict how structural changes in albedo, surface roughness and canopy conductance following LCC will alter surface temperature. This method allows us not only to explain the observed differences in surface temperature between two non-adjacent study sites with different environmental conditions, but also to separate the contribution of biophysical and non-biophysical properties to surface temperature. Our results suggest that changes in biophysical properties due to shrub encroachment and tree mortality in the Southwestern US (independent of changes in other environmental properties) can potentially lead to an increase in midday surface temperature (11AM to 2PM) of 1 to 2 degrees Celsius, comparable to changes in surface temperature following deforestation. Although the average surface temperature increase in response to both shrub encroachment and tree mortality is similar, the biophysical properties driving the temperature change are different in each scenario. Change in aerodynamic conductance following tree mortality is the largest contributor to heating, while reduced albedo and canopy conductance drive the increase in surface temperature following shrub encroachment. Finally, we also show how this increase in daytime surface temperature could be further intensified with future climate, especially with the expected reduction in soil water availability in the Southwest.

54 ENVIRONMENTAL SCIENCES↗

Mapping Surface Cover Parameters Using Aggregation Rules and Remotely Sensed Cover Classes

A coupled model, which combines the Biosphere-Atmosphere Transfer Scheme (BATS) with an advanced atmospheric boundary-layer model, was used to validate hypothetical aggregation rules for BATS-specific surface cover parameters. The model was initialized and tested with observations from the Anglo-Brazilian Amazonian Climate Observational Study and used to simulate surface fluxes for rain forest and pasture mixes at a site near Manaus in Brazil. The aggregation rules are shown to estimate parameters which give area-average surface fluxes similar to those calculated with explicit representation of forest and pasture patches for a range of meteorological and surface conditions relevant to this site, but the agreement deteriorates somewhat when there are large patch-to-patch differences in soil moisture. The aggregation rules, validated as above, were then applied to remotely sensed 1 km land cover data set to obtain grid-average values of BATS vegetation parameters for 2.8 deg x 2.8 deg and 1 deg x 1 deg grids within the conterminous United States. There are significant differences in key vegetation parameters (aerodynamic roughness length, albedo, leaf area index, and stomatal resistance) when aggregate parameters are compared to parameters for the single, dominant cover within the grid. However, the surface energy fluxes calculated by stand-alone BATS with the 2-year forcing, data from the International Satellite Land Surface Climatology Project (ISLSCP) CDROM were reasonably similar using aggregate-vegetation parameters and dominant-cover parameters, but there were some significant differences, particularly in the western USA.

Arain, Altaf M.↗

Adaptations of Endolithic Communities to Abrupt Environmental Changes in A Hyper-Arid Desert

The adaptation mechanisms of microbial communities to natural perturbations remain relatively unexplored, particularly in extreme environments. The extremophilic communities of halite (NaCl) nodules from the hyper-arid core of the Atacama Desert are self-sustained and represent a unique opportunity to study functional adaptations and community dynamics with changing environmental conditions. We transplanted halite nodules to different sites in the desert and investigated how their taxonomic, cellular, and biochemical changes correlated with water availability, using environmental data modeling and metagenomic analyses. Salt-in strategists, mainly represented by haloarchaea, significantly increased in relative abundance at sites characterized by extreme dryness, multiple wet/dry cycles, and colder conditions. The functional analysis of metagenome-assembled genomes (MAGs) revealed site-specific enrichments in archaeal MAGs encoding for the uptake of various compatible solutes and for glycerol utilization. These findings suggest that opportunistic salt-in strategists took over the halite communities at the driest sites. They most likely benefited from metabolites newly released in the environment by the death of microorganisms least adapted to the new conditions. The observed changes were consistent with the need to maximize cellular bioenergetics when confronted with lower water availability and higher salinity, providing valuable information on microbial community adaptations and resilience to climate change.

Atacama↗

Fundamental Study of Migration Behavior of Cesium under the Unsaturated Condition through One-dimensional Column Simulating Soil around the Disposal Site - 20262

Using a packed column simulating unsaturated soil around the disposal site, flow experiments of cesium ions were conducted in order to examine the difference of retardation effect between saturated and unsaturated conditions. The column was packed with silica sand particles of 350 μm in diameter. In this study, it was confirmed that the X-ray CT images of the column showed that the water saturation was mostly uniform within the column under unsaturated conditions. The values of water saturation in the flow experiments of Cs ions were in a range from 0.85 to 0.93. The retardation coefficients(Rd) were estimated by applying the one-dimensional advection-dispersion equation to the experimental results. The comparison of the Rd-values estimated experimentally and theoretically showed that the experimental value was estimated to be larger than the theoretical value. This means that the theoretical value evaluated through a conventional method would bring the conservative value as an apparent retardation coefficient, at least when the flow direction is from top to bottom as shown in this study. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Monitoring the vernal advancement and retrogradation (green wave effect) of natural vegetation

The author has identified the following significant results. Continued evaluation of autumnal phase and early vernal phase data indicate that the quality of ERTS-1 imagery over the Great Plains Corridor test sites are adequate to show relatively small temporal changes in the condition and quantity of vegetation at the several test sites. Vegetation changes measured from August through April are observable in reflectance changes recorded by ERTS-1. Vegetation changes due to grazing treatment and environmental conditions at the test sites are being monitored with ground data and ERTS-1 data, and appear adequate to complete all phases of the Great Plains Corridor investigation. NASA high flight aerial photography proved to be an indispensable tool for locating the Great Plains Corridor test sites on the computer derived grey maps of ERTS-1 digital data.

Rouse, J. W., Jr.↗

Rhizosphere Microbiome Diversity Potentially Supports Robust Nature of Field Pennycress ( Thlaspi arvense L.) in Dryland Cropping Systems of Eastern Washington

ABSTRACT Field pennycress ( Thlaspi arvense L.) is an annual in the Brassicaceae family and is currently being developed as an oilseed intermediate crop suitable for renewable biodiesel and jet fuel. It displays many desirable characteristics for this role including cold tolerance, a rapid life cycle, and a seed fatty acid profile conducive to bioenergy generation. These traits make field pennycress favorable for winter oilseed cultivation in the inland Pacific Northwest (iPNW). Simultaneously, intermediate crops are an increasingly recognized component of both agronomic sustainability and soil health management. Intermediate crops enhance soil microbial diversity, which benefits both soil and plant health. To understand the impact of field pennycress on soil microbial diversity, two natural accessions and seven experimental accessions were grown at three sites in Eastern Washington. Aboveground biomass and rhizosphere soil were then collected. Soil genomic DNA was extracted from rhizosphere samples and used to generate an amplicon library for bacterial (16S) and fungal (ITS) rRNA sequences. The resulting libraries were analyzed in QIIME2, which revealed that not only did the fad2 deficient line from the Spring32‐10 background have significantly increased aboveground biomass production compared to other pennycress genotypes, but also displayed significantly higher β‐diversity in the rhizosphere community specifically at the site experiencing the driest conditions. ANCOM analysis showed that multiple sequences similar to beneficial plant and soil health enhancing organisms such as Trichoderma spirale , Pseudomonas spp., and Methylobacterium goesingense were found to be enriched in the microbiome of the fad2 Spring32‐10 background also at that site. To add additional context to rhizosphere community data, root exudates from two pennycress genotypes were captured in magenta boxes and analyzed using HPLC. Future work will expand our understanding of the mechanisms by which field pennycress creates diversity in the rhizosphere, thus expanding our ability to cultivate this crop in the iPNW.

54 ENVIRONMENTAL SCIENCES↗

Distribution of Infiltration in the 216-U-10 and 216-B-3 Pond Systems 1944-1997

A modeling system to simulate fate and transport of contaminant plumes in groundwater beneath the Central Plateau to support the Cumulative Impact Evaluation (CIE) and Composite Analysis (CA) is being developed. The CIE will evaluate the cumulative effect of multiple Central Plateau radiological and chemical sources on groundwater quality (DOE/RL-2018-69, Cumulative Impact Evaluation Technical Approach Document ). This will enable cleanup decisions to be evaluated in the context of all Central Plateau waste sites and existing groundwater conditions. The CA evaluates the cumulative effect of all sources of radioactive materials on radiological dose to future members of the public (DOE/RL-2018-60, Annual Status Report (FY 2018): Composite Analysis of Low Level Waste Disposal in the Central Plateau of the Hanford Site ). Fate and transport modeling will be used to forecast future groundwater concentrations for both the CIE and CA. The CIE/CA subsurface modeling system is divided into source (inventory), vadose zone, and saturated zone facets. Source inventory is a necessary input to the vadose zone facet, and releases from the vadose zone to groundwater are inputs to the saturated zone facet. The vadose zone facet simulates historical and future releases from the vadose zone to groundwater for both liquid waste and solid waste disposal sites. Effluent release volumes and radionuclide inventory estimates for liquid waste sites are contained in ECFHANFORD- 17-0079, Hanford Soil Inventory Model (SIM-v2) Calculated Radionuclide Inventory of Direct Liquid Discharges to Soil in the Hanford Site’s 200 Areas , herein referred to as SIM-v2. The liquid waste sites in SIM-v2 include the 216-B-3 Pond near 200 East Area and the 216-U-10 Pond in 200 West Area. The 216-B-3 Pond system consisted of a main pond and 3 expansion lobes that were operational during overlapping time periods. It also included influent ditches, but these are not listed as liquid waste sources in SIM-v2 and are not included in the CIE/CA modeling. The total effluent volume released to the pond system was measured, but the partitioning of this volume to the various expansion lobes was not determined and is not accounted for in SIM-v2. Regarding the 216-U-10 Pond, it received water from several influent ditches. The pond and the influent ditches are listed as liquid waste sites in SIM-v2 and are included as sources in the CIE/CA modeling. Because water in the ditches flowed into the pond, only a portion of the effluent volumes and contaminant inventories assigned to the ditches in SIM-v2 infiltrated from the ditches. Thus, partitioning of infiltration and contaminant inventories between the ditches and the pond is not fully accounted for in SIM-v2. Further, some of the water in the 216-U-10 Pond entered overflow ditches and the amount of this overflow was not recorded and is not accounted for in SIM-v2. Thus, the purpose of this Environmental Calculation File (ECF) is to partition the infiltration of wastewater and contaminant inventory between the main pond and each expansion lobe of the 216-B-3 Pond system, and to partition the infiltration of wastewater and contaminant inventory between the ditches and pond of the 216-U-10 Pond system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Physically based correction of systematic errors of Rotating Shadowband Irradiometers

Accurate measurements of direct normal, diffuse horizontal and global horizontal irradiance (DNI, DHI and GHI) are needed for meteorological studies and are essential for the solar resource assessment at potential solar power plant sites. Often, these potential sites are remote and hence require robust sensors that require minimal maintenance that are not affected strongly by soiling. Therefore, Rotating Shadowband Irradiometers (RSI) are widely used for resource assessment. To achieve the required accuracy, corrections for the raw values of RSIs depending on systematic temperature, incidence angle and spectral errors must be used, and a thorough calibration of the sensor head must be applied. The existing correction functions are derived from comparisons of RSIs to thermopile radiometers at selected sites and therefore empirical. Their accuracy is considered to be site dependent. In this work a new correction and calibration method is presented that removes the systematic errors using a physical approach. It is based on information of the sensor properties as well as measurements of its directional response, and incorporates the atmospheric conditions at the measurement site. In this case, no empiric relations obtained from a specific site are required. The method requires estimates of the current DHI and GHI spectra during each measurement of the RSI. Based on these spectra, a spectral correction, which includes a spectrum dependent temperature correction, can be made without employing empirical relationships. The new physical calibration and correction method is tested at three sites and reaches similar results compared to the empirical functions. This is already achieved with rudimentary estimations of the GHI and DHI spectra and we expect that these estimations can be improved in the future. The results indicate that the physical approach reduces the problematic location dependence of the current calibration and correction methods. The physical correction and calibration method show promise for a further improvement of the RSI accuracy.

47 OTHER INSTRUMENTATION↗