SEARCH · Search NASA

Results for “source models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1990

A model of the 8-25 micron point source infrared sky

A model is developed that permits the representation of the Galactic disk and bulge, the molecular ring, extragalactic sky, and other Galactic structures in terms of the IR point-source sky. Full characterization is achieved for up to 87 types of Galactic sources in terms of scale heights and absolute magnitudes, and the model is guided by a parallel Monte Carlo simulation of the Galaxy at 12 microns. The model predicts differential and cumulative IR source counts for all bandpasses in the IRAS ranges and can therefore be employed to predict the character of the point-source sky related to IR space observations.

Wainscoat, Richard J.↗

NASA NTRS1981

A transient MHD model applicable for the source of solar cosmic ray acceleration

A two-dimensional, time-dependent magnetohydrodynamic model is used to describe the possible mechanisms for the source of solar cosmic ray acceleration following a solar flare. The hypothesis is based on the propagation of fast mode MHD shocks following a sudden release of energy. In this presentation, the effects of initial magnetic topology and strength on the formation of MHD shocks have been studied. The plasma beta (thermal pressure/magnetic pressure) is considered as a measure of the initial, relative strength of the field. During dynamic mass motion, the Alfven Mach number is the more appropriate measure of the magnetic field's ability to control the outward motion. It is suggested that this model (computed self-consistently) provides the shock waves and the disturbed mass motion behind it as likely sources for solar cosmic ray acceleration.

Dryer, M.↗

NASA NTRS1988

X-ray spectral models of Galactic bulge sources - The emission-line factor

Current difficulties in finding unique and physically meaningful models for the X-ray spectra of Galactic bulge sources are exacerbated by the presence of strong, variable emission and absorption features that are not resolved by the instruments observing them. Nine Einstein solid state spectrometer (SSS) observations of five Galactic bulge sources are presented for which relatively high resolution objective grating spectrometer (OGS) data have been published. It is found that in every case the goodness of fit of simple models to SSS data is greatly improved by adding line features identified in the OGS that cannot be resolved by the SSS but nevertheless strongly influence the spectra observed by SSS.

Vrtilek, S. D.↗

NASA NTRS1983

On the evolutionary status of bright, low-mass X-ray sources

A model of bright, low-mass X-ray binaries is proposed which features a lower giant-branch star losing mass on a nuclear time scale to an accreting compact companion. Simple numerical models show that mass transfer rates equal to or greater than 10 to the -9th solar masses per yr are sustained at very nearly a constant rate until the envelope of the donor star is exhausted. The model predicts orbital periods in the range 1-200 days and X-ray to optical luminosity ratios Lx/Lopt = 200-1000 for these sources. It accounts in a natural way for the large fraction of the total galactic bulge luminosity emitted by a few bright (10 to the 37th erg/s or greater) sources. It also accords very well with the observed X-ray and optical properties of the halo source Cyg X-2 and also with those of 2S 0921-63, provided this latter system contains a massive accreting white dwarf rather than a neutron star. Problems of the prior evolution of low-mass X-ray sources are also briefly delineated.

Webbink, R. F.↗

NASA NTRS1987

The triose model - Glyceraldehyde as a source of energy and monomers for prebiotic condensation reactions

Glyceraldehyde acts as a source of energy and monomers in a new model of the origin of life. The simplest form of the model functions by converting formaldehyde from the environment into glyceraldehyde which spontaneously forms hemiacetal adducts that are oxidized to polyglyceric acid. Polyglyceric acid, in turn, acts as an autocatalyst with a rudimentary replicating ability. A unique property of the model is its ability to unite the origin of metabolism and the origin of polymer synthesis into a single process. Furthermore, the chemical resemblance of the model to glycolysis gives it the potential to develop a biological metabolism in a straightforward manner.

Weber, Arthur L.↗

NASA NTRS1989

Computing induced velocity perturbations due to a helicopter fuselage in a free stream

The velocity field of a representative helicopter fuselage in a free stream is computed. Perturbation velocities due to the fuselage are computed in a plan above the location of the helicopter rotor (rotor removed). The velocity perturbations computed by a source-panel model of the fuselage are compared with experimental measurements taken with a laser velocimeter. Three paneled fuselage models are studied: fuselage shape, fuselage shape with hub shape, and a body of revolution. The velocity perturbations computed for both fuselage shape models agree well with the measured velocity field except in the close vicinity of the rotor hub. In the hub region, without knowing the extent of separation, modeling of the effective source shape is difficult. The effects of the fuselage perturbations are not well-predicted with a simplified ellipsoid fuselage. The velocity perturbations due to the fuselage at the plane of the measurements have magnitudes of less than 8 percent of free-stream velocity. The velocity perturbations computed by the panel method are tabulated for the same locations at which previously reported rotor-inflow velocity measurements were made.

Berry, John D.↗

NASA NTRS1997

Modeling of Water Injection into a Vacuum

A loosely coupled two-phase vacuum water plume model has been developed. This model consists of a source flow model to describe the expansion of water vapor, and the Lagrangian equations of motion for particle trajectories. Gas/Particle interaction is modeled through the drag force induced by the relative velocities. Particles are assumed traveling along streamlines. The equations of motion are integrated to obtain particle velocity along the streamline. This model has been used to predict the mass flux in a 5 meter radius hemispherical domain resulting from the burst of a water jet of 1.5 mm in diameter, mass flow rate of 24.2 g/s, and stagnation pressure of 21.0 psia, which is the nominal Orbiter water dump condition. The result is compared with an empirical water plume model deduced from a video image of the STS-29 water dump. To further improve the model, work has begun to numerically simulate the bubble formation and bursting present in a liquid stream injected into a vacuum. The technique of smoothed particle hydrodynamics was used to formulate this simulation. A status and results of the on-going effort are presented and compared to results from the literature.

Alred, John W.↗

NASA NTRS1995

Heliomagnetic Latitude Dependence of the Heliospheric Magnetic Field

ICE and IMP-8 data were analyzed in a heliomagnetic coordinate system defined by the orientation of the solar magnetic dipole. Observations were compared with several solar magnetic field models. The radial component of the magnetic field was found to reverse sign abruptly at the sector boundary; this is consistent with the sheet model, but inconsistent with source surface models .

ICE↗

NASA NTRS1986

On the two states of CYG X-1 and related sources

A model for active galactic nuclei (AGN), employing quasi-spherical accretion onto a black hole, when scaled down to solar mass objects, provides a straightforward account of the bimodal spectral behavior of Cyg X-1 and the other galactic black hole candidates. It is argued that the change in the spectrum is due to the drastic increase of the source compactness (L/R) with the accretion rate m and the subsequent conversion of most of the energy released by accretion into e(+)e(-) pairs. It is also argued that similar changes may be observed in active galactic nuclei.

Kazanas, D.↗

NASA NTRS2001

Electromagnetic Modeling of Distributed-Source-Excitation of Coplanar Waveguides: Applications to Traveling-Wave Photomixers

In this work an electromagnetic model and subsequent design is presented for a traveling-wave, coplanar waveguide (CPW) based source that will operate in the THz frequency regime. The radio frequency (RF) driving current is a result of photoexcitation of a thin GaAs membrane using two frequency-offset lasers. The GaAs film is grown by molecular-beam-epitaxy (MBE) and displays sub-ps carrier lifetimes which enable the material conductivity to be modulated at a very high rate. The RF current flows between electrodes deposited on the GaAs membrane which are biased with a DC voltage source. The electrodes form a CPW and are terminated with a double slot antenna that couples the power to a quasi-optical system. The membrane is suspended above a metallic reflector to launch all radiation in one direction. The theoretical investigation and consequent design is performed in two steps. The first step consists of a direct evaluation of the magnetic current distribution on an infinitely extended coplanar waveguide excited by an impressed electric current distributed over a finite area. The result of the analysis is the difference between the incident angle of the laser beams and the length of the excited area that maximizes the RF power coupled to the CPW. The optimal values for both parameters are found as functions of the CPW and membrane dimensions as well as the dielectric constants of the layers. In the second step, a design is presented of a double slot antenna that matches the CPW characteristic impedance and gives good overall performance. The design is presently being implemented and measurements will soon be available.

Pasqualini, Davide↗

NASA NTRS1986

The two states of Cyg X-1 and related sources

The model for active galactic nuclei of Kazanas and Ellison (1986a), employing quasi-spherical accretion onto a black hole, when scaled down to solar mass objects, provides a straightforward account of the bimodal spectral behavior of Cyg X-1 and the other galactic black hole candidates. It is argued that the change in the spectrum is due to the drastic increase of the source compactness with the accretion rate and the subsequent conversion of most of the energy released by accretion into e(+)e(-) pairs. It is also argued that similar changes may be observed in active galactic nuclei.

Kazanas, D.↗

NASA NTRS1973

Models for compact pulsing X-ray sources.

Development of a model of a neutron star (Cen X-3) which releases the infall energy of accreted matter. Some general remarks are made on the possibility of accretion as a source of energy. It is shown that overflow of the Roche lobe is neither necessary as a source of mass nor probable in view of the observed stellar line widths of the two identified X-ray companions. While not excluding the possibility that tidal forces may drive some mass outflow, a number of models are investigated in which the material to be accreted appears in the form of a stellar wind. The behavior of the accreted gas near the accreting object is discussed, as well as the transfer of angular momentum near the accreting object. It is concluded that a relatively simple stellar wind driven accretion model appears to satisfactorily account, in a quantitative but not precise way, for most of the observed features of Cen X-3.

Ostriker, J. P.↗

NASA NTRS1976

A soft X-ray map of the Perseus cluster of galaxies

A 0.5-3-keV X-ray map of the Perseus cluster of galaxies is presented. The map shows a region of strong emission centered near NGC 1275 plus a highly elongated emission region which lies along the line of bright galaxies that dominates the core of the cluster. The data are compared with various models that include point and diffuse sources. One model which adequately represents the data is the superposition of a point source at NGC 1275 and an isothermal ellipsoid resulting from the bremsstrahlung emission of cluster gas. The ellipsoid has a major core radius of 20.5 arcmin and a minor core radius of 5.5 arcmin, consistent with the values obtained from galaxy counts. All acceptable models provide evidence for a compact source (less than 3 arcmin FWHM) at NGC 1275 containing about 25% of the total emission. Since the diffuse X-ray and radio components have radically different morphologies, it is unlikely that the emissions arise from a common source, as proposed in inverse-Compton models.

Cash, W.↗

NASA NTRS1993

Low-frequency source parameters of twelve large earthquakes

A global survey of the low-frequency (1-21 mHz) source characteristics of large events are studied. We are particularly interested in events unusually enriched in low-frequency and in events with a short-term precursor. We model the source time function of 12 large earthquakes using teleseismic data at low frequency. For each event we retrieve the source amplitude spectrum in the frequency range between 1 and 21 mHz with the Silver and Jordan method and the phase-shift spectrum in the frequency range between 1 and 11 mHz with the Riedesel and Jordan method. We then model the source time function by fitting the two spectra. Two of these events, the 1980 Irpinia, Italy, and the 1983 Akita-Oki, Japan, are shallow-depth complex events that took place on multiple faults. In both cases the source time function has a length of about 100 seconds. By comparison Westaway and Jackson find 45 seconds for the Irpinia event and Houston and Kanamori about 50 seconds for the Akita-Oki earthquake. The three deep events and four of the seven intermediate-depth events are fast rupturing earthquakes. A single pulse is sufficient to model the source spectra in the frequency range of our interest. Two other intermediate-depth events have slower rupturing processes, characterized by a continuous energy release lasting for about 40 seconds. The last event is the intermediate-depth 1983 Peru-Ecuador earthquake. It was first recognized as a precursive event by Jordan. We model it with a smooth rupturing process starting about 2 minutes before the high frequency origin time superimposed to an impulsive source.

Harabaglia, Paolo↗

NASA NTRS2000

Model Study of the Sources of Upper Tropospheric Ozone Over The Atlantic, with Emphasis on Interhemispheric Asymmetries

Measurements of ozone and aerosols from ships transecting the Atlantic Ocean reveal considerable interhemispheric asymmetries in the vertical structure of the ozone distribution. There is much more upper tropospheric ozone to the South of the Equator than in the northern hemisphere. These profiles suggest that the air in the southern hemispheric tropics and subtropics has a source in the stratosphere, while that in the northern hemisphere originates in the boundary layer. A model experiment designed to investigate this problem will be discussed. They are based on a new general circulation model, based on a Finite-Volume dynamical core and the physical parametrizations from the Community Climate Model at the National Center for Atmospheric Research (NCAR). The model simulates a climatological state in reasonable agreement with observations, comparable to other contemporary climate models, but has a much more accurate transport capability than most other present-day models. The experiment involves using a suite of tracers, designed to highlight air from different source regions. Some of these (water vapor and ozone) represent real atmospheric quantities, while others are markers which indicate whether the air originates in the stratosphere, the boundary layer, or has traversed regions of convection (for example). The experiments were run for periods of up to one month, initialized from snapshots from a long climate integration of the model. A sample of results will be presented, chosen to illustrate the different sources of air in the upper troposphere and the physical mechanisms by which these air parcels arrived there.

Pawson, Steven↗

NASA NTRS2011

Modeling Geometric Arrangements of TiO2-Based Catalyst Substrates and Isotropic Light Sources to Enhance the Efficiency of a Photocatalystic Oxidation (PCO) Reactor

The closed confined environments of the ISS, as well as in future spacecraft for exploration beyond LEO, provide many challenges to crew health. One such challenge is the availability of a robust, energy efficient, and re-generable air revitalization system that controls trace volatile organic contaminants (VOCs) to levels below a specified spacecraft maximum allowable concentration (SMAC). Photocatalytic oxidation (PCO), which is capable of mineralizing VOCs at room temperature and of accommodating a high volumetric flow, is being evaluated as an alternative trace contaminant control technology. In an architecture of a combined air and water management system, placing a PCO unit before a condensing heat exchanger for humidity control will greatly reduce the organic load into the humidity condensate loop ofthe water processing assembly (WPA) thereby enhancing the life cycle economics ofthe WPA. This targeted application dictates a single pass efficiency of greater than 90% for polar VOCs. ~ Although this target was met in laboratory bench-scaled reactors, no commercial or SBIR-developed prototype PCO units examined to date have achieved this goal. Furthermore, the formation of partial oxidation products (e.g., acetaldehyde) was not eliminated. It is known that single pass efficiency and partial oxidation are strongly dependent upon the contact time and catalyst illumination, hence the requirement for an efficient reactor design. The objective of this study is to maximize the apparent contact time and illuminated catalyst surface area at a given reactor volume and volumetric flow. In this study, a Ti02-based photocatalyst is assumed to be immobilized on porous substrate panels and illumination derived from linear isotropic light sources. Mathematical modeling using computational fluid dynamics (CFD) analyses were performed to investigate the effect of: 1) the geometry and configuration of catalyst-coated substrate panels, 2) porosity of the supporting substrate, and 3) varying the light source and spacing on contact time and illuminated catalyst area.

Richards, Jeffrey T.↗

NASA NTRS2003

Review of Diagnostics for Water Sources in General Circulation Models (GCMs)

We will describe the uses of passive tracers in GCMs to compute the geographical sources of water for precipitation. We will present a summary of recent research and how this methodology can be applied in climate and climate change studies. We will also discuss the possibility of using passive tracers in conjunction with simulations and observations of stable observations.

Bosilovich, M.↗

NASA NTRS1993

Source term evaluation for combustion modeling

A modification is developed for application to the source terms used in combustion modeling. The modification accounts for the error of the finite difference scheme in regions where chain-branching chemical reactions produce exponential growth of species densities. The modification is first applied to a one-dimensional scalar model problem. It is then generalized to multiple chemical species, and used in quasi-one-dimensional computations of shock-induced combustion in a channel. Grid refinement studies demonstrate the improved accuracy of the method using this modification. The algorithm is applied in two spatial dimensions and used in simulations of steady and unsteady shock-induced combustion. Comparisons with ballistic range experiments give confidence in the numerical technique and the 9-species hydrogen-air chemistry model.

Sussman, Myles A.↗