Search NASA⌕ Search

SEARCH · Search NASA

Results for “supercritical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development and Validation of Physics-Based Sub-Models of High-Pressure Supercritical Fuel Injection at Diesel Conditions Insert

The project sought to develop and validate accurate, physics-based, numerical submodels and implement them in computational fluid dynamics (CFD) software codes to enable accurate predictions of diesel sprays at pressures higher than the current systems. The combined experimental-computational effort has four main objectives: (1) acquire spatially and temporally resolved scalar measurements of fuel-oxidizer mixing in the near field of the fuel jet, (2) develop software modules to calculate thermo-physical properties of diesel surrogates and their mixtures with oxidizer of interest in real-gas operating regime, (3) integrate the real-fluid model into a commercial and an open-source CFD code to simulate fuel-air mixing in high-pressure diesel sprays, and (4) assess the robustness, accuracy, and uncertainty of the integrated CFD solvers in computing diesel sprays. Project accomplishments are consistent with the original goals of the project. Although we acquired spatially and temporally resolved scalar measurements, they were limited to refractive index difference and not to thermodynamic properties such as temperature and equivalence ratio. However, we successfully developed the theoretical background needed to acquire such measurements at diesel conditions and demonstrated the capability of the RSD for scalar measurements in a canonical turbulent jet flow replicating features of the diesel jet. Additional work will be needed to implement these procedures at high-pressure, high-temperature engine-like conditions of the CPFR. Mainly, we did not anticipate the need to find the liquid boundary and its statistical features or the state relationships between refractive index and thermodynamic properties, assuming the widely known Dale-Gladstone equation would suffice. Still, efforts devoted to these tasks were essential to fulfil the goals of the project and serves as the foundation on which many of the conclusions and key contributions of this project are based. Further assessment and application of the developed CFD codes is recommended to fully realize the benefits of this research.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Technology Development for Modular, Low-Cost, High-Temperature Recuperators for Supercritical CO 2 Power Cycles (Final Report)

The program’s focus was to evaluate, advance, and demonstrate recuperator design concepts, materials, and fabrication methods that facilitate the commercial availability of compact and low-cost recuperators. Emphasis was placed on recompression closed Brayton cycles having a turbine inlet temperature exceeding 700°C and differential pressures on the order of 200 bar and were scalable to accommodate plant sizes from 10 to 1,000 MWe. The primary objectives of the first budget period, which included conceptual design, preliminary development, and prototype fabrication and testing, were accomplished. A new recuperator design concept, stacked-sheet heat exchanger (SSHX), was realized during the project. The design was taken from paper to hardware and successfully tested. The SSHX prototype recuperator met or exceeded program thermal, hydraulic and performance/cost metrics goals. The first budget period was extended to retire risk in scaling the recuperator from the kWt to MWt thermal capacity scale. The fabrication and design requirements for the budget period one extension were met. Delays associated with the Covid-19 pandemic prevented the fabrication and testing of the industrial scale prototype.

14 SOLAR ENERGY↗
DOE OSTI2020

Measuring Heat Transfer Coefficients for Supercritical Carbon Dioxide Cycle Recuperators

This paper describes the measurement of convective heat transfer coefficients and friction factors for sCO 2 flowing in pin-fin patterned pipes at the US DoE’s National Energy Technology Laboratory (NETL) in Morgantown, WV. The measurement procedures were validated by conducting benchmark tests with smooth stainless-steel tube and comparing the results with published correlations for Nusselt number (𝑁𝑢) and friction factor. Over Reynolds numbers (Re D ) ranging from 5×104 to 2.5×105 , measured 𝑁𝑢 was within 5% of the Dittus-Boelter correlation and measured friction factors were within 5% of the McAdams correlation for smooth tube flow.

42 ENGINEERING↗
DOE OSTI2022

Predictive Large-Eddy Simulation of Supercritical-Pressure Reactive Flows in the Cold Ignition Regime

This report describes a one-year study performed under DOE sponsorship, continuing the investigation of high-pressure turbulent reactive flows. The interest is in the effect of the chemical species distribution in high-pressure turbulent flows in the presence of strong temperature gradients as would occur during reactions in realistic flows. The prime example of such flows are boundary layers in which the wall is at a lower temperature than that of the fluid, as would be the case in Diesel engines. Previous DOE BES work in the program further highlighted the importance of the boundary layer as a configuration for fundamental studies: soot formation in boundary layers is still a problem poorly understood and depends on the availability of particular chemical species at that location, and when boundary layer Large Eddy Simulations results were compared with measurements, the agreement was unfavorable, showing that this important ‘unit’ problem is not well understood. To understand this unit problem, modeling and Direct Numerical Simulations of this unit problem were conducted for the simplest possible multispecies system, that is a binary-species system. The results discovered a new phenomenon, that is, Soret effect induced uphill diffusion. The far-reaching implication is that through an imposed wall/fluid temperature difference it is possible to control the distribution of the species in the boundary layer. Because the results have been documented in one paper published in the refereed literature, and also in conference papers, this final report is in the form of an Executive Summary succinctly describing the results and putting them in perspective with respect to existing information. The refereed and conference papers published are individually listed as Appendices and attached to this report. One manuscript is still in progress and is thus not listed.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Collective Summary of sCO2 Materials Development (Supercritical Transformational Electric Power Generation (STEP) Level 2 Milestone Report) (Parts I - II)

Polymers such as PTFE (polytetrafluorethylene or Teflon), EPDM (ethylene propylene diene monomer) rubber, FKM fluoroelastomer (Viton), Nylon 11, Nitrile butadiene (NBR) rubber, hydrogenated nitrile rubber (HNBR) and perfluoroelastomers (FF_202) are commonly employed in super critical CO 2 (sCO2) energy conversion systems. O-rings and gaskets made from these polymers face stringent performance conditions such as elevated temperatures, high pressures, pollutants, and corrosive humid environments. In FY 2019, we conducted experiments at high temperatures (100°C and 120°C) under isobaric conditions (20 MPa). Findings showed that elevated temperatures accelerated degradation of polymers in sCO2, and that certain polymer microstructures are more susceptible to degradation over others. In FY 2020, the focus was to understand the effect of sCO2 on polymers at low (10 MPa) and high pressures (40 MPa) under isothermal conditions (100°C). It was clear that the same selectivity was observed in these experiments wherein certain polymeric functionalities showed more propensity to failure over others. Fast diffusion, supported by higher pressures and long exposure times (1000 hours) at the test temperature, caused increased damage in sCO2 environments to even the most robust polymers. We also looked at polymers under compression in sCO2 at 100°C and 20 MPa pressure to imitate actual sealing performance required of these materials in sCO2 systems. Compression worsened the physical damage that resulted from chemical attack of the polymers under these test conditions. In FY 2021, the effect of cycling temperature (from 50°C to 150°C to 50°C) for polymers under a steady sCO2 pressure of 20 MPa was studied. The aim was to understand the influence of cycling temperatures of sCO2 for typical polymers under isobaric (20 MPa) conditions. Thermoplastic polymers (Nylon, and PTFE) and elastomers (EPDM, Viton, Buna N, Neoprene, FF202, and HNBR) were subjected to 20 MPa sCO2 pressure for 50 cycles and 100 cycles in separate experiments. Samples were extracted for ex-situ characterization at 50 cycles and upon the completion of 100 cycles. Each cycle constituted of 175 minutes of cycling from 50°C to 150°C. The polymer samples were examined for physical and chemical changes by Dynamic Mechanical and Thermal Analysis (DMTA), Fourier Transform Infrared (FTIR) spectroscopy, and compression set. Density and mass changes immediately after removal from test were measured for degree of swell comparisons. Optical microscopy techniques and micro computer tomography (micro CT) images were collected on select specimens. Evaluations conducted showed that exposures to super-critical CO2 environments resulted in combinations of physical and/or chemical changes. For each polymer, the dominance of cycling temperatures under sCO2 pressures, were evaluated. Attempts were made to qualitatively link the permanent sCO2 effects to polymer micro- structure, free volume, backbone substitutions, presence of polar groups, and degree of crystallinity differences. This study has established that soft polymeric materials are conducive to failure in sCO2 through mechanisms of failure that are dependent on polymer microstructure and chemistry. Polar pendant groups, large atom substitutions on the backbone are some of the factors that are influential structural factors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solid State Additive Manufacturing of Oxide Dispersion Strengthened-FeCrAl Alloy Components for High-Temperature Supercritical CO2 Power Cycle Applications

In this research, material extrusion additive manufacturing (MEAM) has been explored as an SSAM method for fabrication of 3-D components using ODS-FeCrAl alloy. MEAM-printed 3-D parts go through a series of process steps, e.g., chemical treatment, thermal treatment etc. in order to create a high density fully metallic part. Final 3-D part quality is associated with various process steps, e.g., filament fabrication, print design, and thermal treatment optimization. In MEAM, a metal powder loaded filament is used for printing 3-D shapes. Composition of the filament is very important since it provides shape retention at low-to-medium temperature. There are a few commercially available metallic alloy filaments. However, FeCrAl alloy filaments are not commercially available. In this project, we came up with a method to fabricate high quality composite FeCrAl filaments that could be used for MEAM printing. Subsequently, we have optimized MEAM print methods to fabricate samples that are larger than 10 mm, by using a modular print design approach. Finally, we have been able to optimize the chemical and high temperature heat treatment steps to achieve very high density (>98%) in sintered MEAM-printed products.

36 MATERIALS SCIENCE↗
DOE OSTI2025

WEC-SIM Support for an Innovative Zero Discharge Supercritical Water Based Wave Energy Desalination System (CRADA Final Report)

NREL will assist East Carolina University in its development of the foundational knowledge and proof of concept that are needed for future process scale up and commercialization of a sustainable wave-to-water (direct pressurization) desalination unit powered by a wave energy converter. NREL will provide guidance and support to East Carolina University on its: use of the NREL developed WEC-Sim based wave to water system, exploring the WEC-Sim/ASPEN Plus data exchange communication, and using experimental data to hopefully provide validation of analytical models.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

Additively Manufactured Graded Composite Transition Joints for Dissimilar Metal Weldments in Advanced Ultra-Supercritical Power Plant (Final Technical Report)

In this project, we successfully achieved all the goals we proposed: ① Code Development; ② Transition Joint Design; ③ Lab-scale GCTJ Testing Piece Development; ④ Heat Treatment; ⑤ Welding of DMW; ⑥ Mechanical Characterization; ⑦ Corrosion; ⑧ Fabrication of Prototype GCTJ; ⑨In-field Test in SWRI and ⑩Tech-economic Analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Modeling supercritical CO 2 flow and mineralization in reactive host rocks with PFLOTRAN v7.0

Understanding the flow and reactivity of CO 2 injected into geological reservoirs is important for many subsurface applications including secure geologic carbon storage (GCS), critical mineral extraction, enhanced geothermal systems (EGS), and enhanced oil recovery (EOR). Traditionally, subsurface CO 2 injection for GCS applications has focused on geologic formations with favorable subsurface configurations for CO 2 migration and trapping through non-reactive mechanisms such as structural, solubility, and petrophysical trapping. Recently, CO 2 -reactive rocks such as mafic and ultramafic basalts have been investigated for their potential to react with injected CO 2 in situ to simultaneously dissolve host rock minerals and mineralize CO 2 as carbonates. Engineering rapid CO 2 mineralization in the subsurface is attractive because of the increased density of stored CO 2 , the additional safety factors associated with solidification, and the potential to extract valuable critical minerals. Here we present recent developments in the parallel flow and reactive transport simulator PFLOTRAN to model coupled CO 2 -brine flow and reactive transport for a wide range of injection and production applications involving reactive CO 2 -brine systems. These developments are based on the well established and trusted CO 2 flow capabilities in the STOMP-CO 2 simulator. New capabilities added to PFLOTRAN include new CO 2 -brine equations of state with optional thermal coupling, several new constitutive relationships like capillary pressure smoothing and scanning path hysteresis, a fully implicit well model, and native linkage with PFLOTRAN's well-established reactive transport libraries. A series of benchmarks between PFLOTRAN and STOMP-CO 2 verify the newly developed CO 2 -brine flow capabilities. Demonstrations of coupled CO 2 -brine flow modeling and reactive transport show how CO 2 mineralization can be engineered in reactive host rocks. Finally, an example use case involving copper leaching by CO 2 and critical mineral extraction is presented to showcase the strengths of this new implementation. Several limitations still remain, including limited availability of field data to parameterize models. Future work should constrain the evolution of mineral surface area during mineralization and the temperature and/or pH dependence of geochemical reactions for specific systems of interest.

Critical Minerals↗