Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface plasmon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Holography utilizing surface plasmon resonances

A holographic recording medium with a substrate which has a diffraction grating composed of a number of spaced line ridges on the surface is discussed. The first layer consists of a metal with a plasma wavelength shorter than that of the selected light source. A second layer, or coating, on top of the first layer consists of a thin film of photosensitive emulsion. A diagram of the device is provided. The principles of operation are explained.

Cowan, J. J.↗

Mapping VIS-terahertz (=17 THz) surface plasmons sustained on native and chemically functionalized percolated gold thin films using EELS

Heterogeneous assemblies of molecules (Rhodamine B) adsorbed onto a nano-corrugated metallic surface (a percolated Au network) are investigated using electron energy loss spectroscopy in the scanning transmission electron microscope (STEM-EELS). Our first measurements target the native metallic substrate, which consists of a commercial Au thin film atop an ultrathin carbon membrane. The Au film displays a percolated morphology with nanostructures of estimated thickness = 10nm approximately. We observe a rich plasmonic response from the metallic substrate; one which varies nanometrically and spans the VISterahertz region. Multiple localized plasmons are detected at individual nanometric integrated areas, while the spatial distribution of the fields reveal that LSPRs within the same integrated energy window (of 50meV) are supported at different locations simultaneously. We record subsequent EEL spectrum images of the hybrid molecular-metallic construct after deposition of Rhodamine B molecules onto the substrate, where plasmons, molecular vibrations and electronic excitations might all be simultaneously detected. A comparison of average signals for both systems is performed and spectral variations within the three spectral regions where molecular signatures may be observed are discussed. Our measurements and their analysis if applied to the same location before and after molecular deposit, may be used to rationalize optical microscopic and spectroscopic measurements that take advantage of the interplay between molecules and plasmons.

Abellan, Patricia↗

Photoemission electron microscopy of localized surface plasmons in silver nanostructures at telecommunication wavelengths

We image the field enhancement at Ag nanostructures using femtosecond laser pulses with a center wavelength of 1.55 μm. Imaging is based on non-linear photoemission observed in a photoemission electron microscope (PEEM). The images are directly compared to ultra violet PEEM and scanning electron microscopy (SEM) imaging of the same structures. Further, we have carried out atomic scale scanning tunneling microscopy on the same type of Ag nanostructures and on the Au substrate. Measuring the photoelectron spectrum from individual Ag particles shows a larger contribution from higher order photoemission processes above the work function threshold than would be predicted by a fully perturbative model, consistent with recent results using shorter wavelengths. Investigating a wide selection of both Ag nanoparticles and nanowires, field enhancement is observed from 30% of the Ag nanoparticles and from none of the nanowires. No laser-induced damage is observed of the nanostructures neither during the PEEM experiments nor in subsequent SEM analysis. By direct comparison of SEM and PEEM images of the same nanostructures, we can conclude that the field enhancement is independent of the average nanostructure size and shape. Instead, we propose that the variations in observed field enhancement could originate from the wedge interface between the substrate and particles electrically connected to the substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Simultaneous coupling of surface plasmon resonance and photonic bandgap to InGaAs quantum well emission

A photonic bandgap structure was created on the 100 nm thick GaAs barrier layer with Au nanodisks deposited inside the holes. To mitigate the nonradiative surface recombination of GaAs, the Au nanodisks were formed on top of a 15 nm SiO{sub 2} deposited in the holes. A maximum 7.6-fold increase in photoluminescence intensity was obtained at the etch depth of 80 nm. In this configuration, the Au nanodisk is separated from the quantum well by 20 nm of GaAs and 15 nm of SiO{sub 2}. The experimental result was verified by the simulation based on this structure. There was a good agreement between experiments with simulation results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface plasmons induce topological transition in graphene/α-MoO3 heterostructures

Abstract Polaritons in hyperbolic van der Waals materials—where principal axes have permittivities of opposite signs—are light-matter modes with unique properties and promising applications. Isofrequency contours of hyperbolic polaritons may undergo topological transitions from open hyperbolas to closed ellipse-like curves, prompting an abrupt change in physical properties. Electronically-tunable topological transitions are especially desirable for future integrated technologies but have yet to be demonstrated. In this work, we present a doping-induced topological transition effected by plasmon-phonon hybridization in graphene/α-MoO 3 heterostructures. Scanning near-field optical microscopy was used to image hybrid polaritons in graphene/α-MoO 3 . We demonstrate the topological transition and characterize hybrid modes, which can be tuned from surface waves to bulk waveguide modes, traversing an exceptional point arising from the anisotropic plasmon-phonon coupling. Graphene/α-MoO 3 heterostructures offer the possibility to explore dynamical topological transitions and directional coupling that could inspire new nanophotonic and quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Localized surface plasmon resonance mercury detection system and methods

A mercury detection system that includes a flow cell having a mercury sensor, a light source and a light detector is provided. The mercury sensor includes a transparent substrate and a submonolayer of mercury absorbing nanoparticles, e.g., gold nanoparticles, on a surface of the substrate. Methods of determining whether mercury is present in a sample using the mercury sensors are also provided. The subject mercury detection systems and methods find use in a variety of different applications, including mercury detecting applications.

36 MATERIALS SCIENCE↗

Surface plasmon resonance assisted rapid laser joining of glass

Rapid and strong joining of clear glass to glass containing randomly distributed embedded spherical silver nanoparticles upon nanosecond pulsed laser irradiation (∼40 ns and repetition rate of 100 kHz) at 532 nm is demonstrated. The embedded silver nanoparticles were ∼30–40 nm in diameter, contained in a thin surface layer of ∼10 μm. A joint strength of 12.5 MPa was achieved for a laser fluence of only ∼0.13 J/cm{sup 2} and scanning speed of 10 mm/s. The bonding mechanism is discussed in terms of absorption of the laser energy by nanoparticles and the transfer of the accumulated localised heat to the surrounding glass leading to the local melting and formation of a strong bond. The presented technique is scalable and overcomes a number of serious challenges for a widespread adoption of laser-assisted rapid joining of glass substrates, enabling applications in the manufacture of microelectronic devices, sensors, micro-fluidic, and medical devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Surface Plasmon Resonance Evaluation of Colloidal Metal Aerogel Filters

We have fabricated aerogels containing gold, silver, and platinum nanoparticles for gas catalysis applications. By applying the concept of an average or effective dielectric constant to the heterogeneous interlayer surrounding each particle, we extend the technique of immersion spectroscopy to porous or heterogeneous media. Specifically, we apply the predominant effective medium theories for the determination of the average fractional composition of each component in this inhomogeneous layer. Hence, the surface area of metal available for catalytic gas reaction is determined. The technique is satisfactory for statistically random metal particle distributions but needs further modification for aggregated or surfactant modified systems. Additionally, the kinetics suggest that collective particle interactions in coagulated clusters are perturbed during silica gelation resulting in a change in the aggregate geometry.

Smith, David D.↗

Band-gap structures of surface-plasmon polaritons in a subwavelength metal slit filled with periodic dielectrics

We propose a combination structure which consists of a subwavelength metal slit filled periodically with two different dielectrics to modulate slit plasmon polaritons (slit-PPs). The transmission spectra are simulated by the finite-difference time-domain method and the photonic band gaps are observed. The theoretical formula to calculate the band-gap structures is deduced and the calculation results agree satisfactorily with simulated results. This structure can be termed as slit-PP crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum bus of metal nanoring with surface plasmon polaritons

We develop an architecture for distributed quantum computation using quantum bus of plasmonic circuits and spin qubits in self-assembled quantum dots. Deterministic quantum gates between two distant spin qubits can be reached by using an adiabatic approach in which quantum dots couple with highly detuned plasmon modes in a metallic nanoring. Plasmonic quantum bus offers a robust and scalable platform for quantum optics experiments and the development of on-chip quantum networks composed of various quantum nodes, such as quantum dots, molecules, and nanoparticles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of the localized surface plasmon resonance of noble metal quasispherical nanoparticles on their crystallinity-related morphologies

The absorption spectra of 5 nm noble metal nanoparticles (Ag, Au, and Cu) with typical morphologies of multiply twinned particles (MTPs) and single crystals are calculated by using the discrete dipole approximation method. Among the considered morphologies, it is found that icosahedral, cuboctahedral and truncated octahedral particles behave like quasispherical particles whereas the optical response of the decahedral particles significantly differs from the others. This result, which originates from the shape anisotropy of the decahedron, points out the capacity to discriminate decahedral MTPs from a population of particles with mixed crystallinities and related quasispherical shapes.

36 MATERIALS SCIENCE↗

Self-ordering anodized nanotubes: Enhancing the performance by surface plasmon for dye-sensitized solar cell

In the present work, electrochemical anodization has been used to prepare uniform TiO{sub 2} nanotube array photoelectrode. The average internal diameter, tube length and wall thickness of the optimized morphology is {approx}180 nm, 14 {mu}m and 10 nm, respectively. It was found that the tube diameter increases with the anodization voltage. Diffraction data reveals that the nanotubes consist solely of anatase phase. Back illuminated geometry of dye-sensitized solar cell (DSSC), with nanotubes grown at 60 V for 2 h, gave a cell performance of 4.5%. TiO{sub 2} nanotubes are loaded with silver (Ag) nanoparticles synthesized by a hydrothermal route. The Ag particle size is controlled resulting in solar conversion efficiency to increase by 22%. The DSSC based on TiO{sub 2} nanotube with Ag nanoparticles shows power conversion efficiency of 5.5%. Detailed characterization are performed, presented and discussed. - Graphical abstract: Enhanced solar conversion efficiency of dye-sensitized solar cells by decorating TiO{sub 2} nanotube array with Ag nanoparticles. Highlights: Black-Right-Pointing-Pointer Uniform array of TiO{sub 2} nanotubes synthesized via electrochemical anodization. Black-Right-Pointing-Pointer Back illuminated DSSC gave a cell performance of 4.5%. Black-Right-Pointing-Pointer TiO{sub 2} nanotubes are loaded with Ag nanoparticles, which increased the power conversion efficiency to 5.5%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene oxide coated side polished surface plasmon resonance optical fibre sensor with varying polishing losses

Four batches of side-polished SMF optical fibres with different polishing losses, − 0.5 dBm, − 5 dBm, − 10 dBm and − 15 dBm were coated with a graphene oxide layer of ~ 0.5 μm via drop casting. TE polarized light was propagated through the light during experiments and four different transformer oils with different water contents were dropped onto the sensor. The drop in the power of transmitted light was recorded. The responses of the sensors showed good linearity for all, but the least polished fibre showed the weakest response in terms of power drop towards change in concentration. The − 5 dBm fibre showed the best response per unit concentration change. Additional tests showed the increased response for a GO coated side polished sensor compared to an uncoated side polished sensor. Simulation using COMSOL was performed to show the effects on the electric field of a sensor with and without GO coating. Another set of simulations were performed to show the effects of reducing cladding thickness on the coupling of the electric field. Simulations show that the optimal cladding thickness is not the most polished fibre, coinciding with our results that − 15 dBm loss fibre did not show the most response per unit change in the analyte.

77 NANOSCIENCE AND NANOTECHNOLOGY↗