Search NASA⌕ Search

SEARCH · Search NASA

Results for “triangularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Programming correlated magnetic states with gate-controlled moiré geometry

The ability to control the underlying lattice geometry of a system may enable transitions between emergent quantum ground states. We report in situ gate switching between honeycomb and triangular lattice geometries of an electron many-body Hamiltonian in rhombohedral (R)–stacked molybdenum ditelluride (MoTe 2 ) moiré bilayers, resulting in switchable magnetic exchange interactions. At zero electric field, we observed a correlated ferromagnetic insulator near one hole per moiré unit cell with a widely tunable Curie temperature up to 14 K. Applying an electric field switched the system into a half-filled triangular lattice with antiferromagnetic interactions; further doping this layer-polarized superlattice tuned the antiferromagnetic exchange interaction back to ferromagnetic. Our work demonstrates R-stacked MoTe 2 moirés to be a laboratory for engineering correlated states with nontrivial topology.

Science & Technology - Other Topics↗
DOE OSTI2025

Triangle Method for Dense ReLU Layers [SWR-25-72]

This software is an implementation of the methods for initializing and training neural networks to be more efficient per parameter, described more fully below and in the related publication: In theory, depth should make a ReLU network EXPONENTIALLY more efficient by enabling it to produce an exponential number of piecewise linear sections in its output. This reasoning is largely based on the work of mathematicians that have hand-constructed networks that make good use of depth. In practice however, even very deep ReLU networks that have been randomly initialized will behave identically to their shallow counterparts - missing an entire exponential dimension of efficiency. The triangle method is a first attempt at realizing the exponential potential of deep networks. Instead of randomly setting weights, we force pairs of neurons in each layer learn to build triangles (i.e. functions from [0,1] -> [0,1] that look like triangles). This is a very efficient pattern for generating lots of linear pieces because composing two triangular functions doubles the number of pieces with each composition. The triangle method is more than just a different initialization, it is a new paradigm of training. Instead of making direct updates to the matrix weights, we do an extra step of backpropagation to collect the derivatives of the loss function with respect to the shapes of the triangles, training them to tilt left or right. This process essentially holds the networks hand throughout the loss landscape and forces it to always use depth effectively by producing triangular shapes internally. This can produce several orders of magnitude of improvement on convex one-dimensional regression problems. Much more theoretical work is needed to realize its full potential beyond this context, but the implementation in this repository will still work in arbitrary numbers of dimensions. The file Triangle_Method.py is a generalized form of the method that will build each neuron its own custom 1-d convex activation function (with exponential efficiency). Example usage on one dimensional problems can be found in Example_Usage.ipynb and an example of using this in a real neural network can be found in Example_VGG16_CIFAR10.ipynb.

Milkert, Max [National Renewable Energy Laboratory↗
DOE OSTI2024

Batched sparse direct solver design and evaluation in SuperLU_DIST

Over the course of interactions with various application teams, the need for batched sparse linear algebra functions has emerged in order to make more efficient use of the GPUs for many small and sparse linear algebra problems. In this paper, we present our recent work on a batched sparse direct solver for GPUs. The sparse LU factorization is computed by the levels of the elimination tree, leveraging the batched dense operations at each level and a new batched Scatter GPU kernel. The sparse triangular solve is computed by the level sets of the directed acyclic graph (DAG) of the triangular matrix. Batched operations overcome the large overhead associated with launching many small kernels. For medium sized matrix batches with not-so-small bandwidth, using an NVIDIA A100 GPU, our new batched sparse direct solver is orders of magnitude faster than a batched banded solver and uses less than one-tenth of the memory.

Boukaram, Wajih↗
DOE OSTI2024

Skyrmion soliton motion on periodic substrates by atomistic and particle-based simulations

Abstract We compare the dynamical behavior of magnetic skyrmions interacting with square and triangular defect arrays just above commensuration using both atomistic and particle-based models. Under applied drives, the initial motion is a kink traveling through the pinned skyrmion lattice. For the square defect array, both models agree well and show a regime in which the soliton motion is locked along 45°. The atomistic model also produces locking of a soliton along 30°, which is absent in the particle-based model. For the triangular defect array, the atomistic model exhibits 30° soliton motion over a wide region of external current values. In contrast, the particle-based model gives 45° soliton motion over a small range of external driving force values. The difference arises because the nondeforming particle model facilitates meandering skyrmion orbits while the deformable atomistic model enables stronger skyrmion-skyrmion interactions that reduce the meandering. Our results indicate that soliton motion through pinned skyrmion lattices on a periodic substrate is a robust effect.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Overland flow numerical model prediction, Lower Triangle Region in East River Watershed, Colorado, 3 days

This data package contains numerical simulation results of surface flow variables such as flow velocity and water depth in Lower Triangle Region in East River Watershed, Colorado. The surface flow is a consequence of a high intensity rainfall event with a total duration of 3 days, available at a resolution of 10 minutes. The results are computed on triangular multiresolution meshes with resolutions ranging from 10 meter to 80 meter. The data package also contains a simulation on a uniform triangular mesh with a resolution of 10 meter. The simulations consider surface flow only and neglect subsurface flow, infiltration, and evapotranspiration. The purpose of the data is to assess the quality of a mesh refinement strategy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A copula-based rank histogram ensemble filter

Serial ensemble filters implement triangular probability transport maps to reduce high-dimensional inference problems to sequences of state-by-state univariate inference problems. The univariate inference problems are solved by sampling posterior probability densities obtained by combining constructed prior densities with observational likelihoods according to Bayes' rule. Many serial filters in the literature focus on representing the marginal posterior densities of each state. However, rigorously capturing the conditional dependencies between the different univariate inferences is crucial to correctly sampling multidimensional posteriors. This work proposes a new serial ensemble filter, called the copula rank histogram filter (CoRHF), that seeks to capture the conditional dependency structure between variables via empirical copula estimates; these estimates are used to rigorously implement the triangular (state-by-state univariate) Bayesian inference. The success of the CoRHF is demonstrated on two-dimensional examples and the Lorenz'63 problem. A practical extension to the high-dimensional setting is developed by localizing the empirical copula estimation, and is demonstrated on the Lorenz'96 problem.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Revolutionizing Turbine Cooling with Micro-Architectures Enabled by Direct Metal Laser Sintering

The objective of this research effort was to explore innovative cooling architectures enabled by additive manufacturing techniques for improved turbine cooling performance. The ability to create complex internal geometries was leveraged to better distribute coolant as well as to integrate inherently unstable flow devices to enhance internal and external heat transfer. This was accomplished with a multi-faceted approach including analytical, experimental, and computational components. This final report documents progress during the total 4.25 year effort that was extended (at no additional cost) from the original 3-year cooperative agreement. Prior to starting the project, significant effort was invested in investigating innovative cooling designs from the open literature. When the project started, we quickly down-selected to 4 configurations: impingement jet fluidic oscillators (for internal leading edge cooling), reverse film cooling (for pressure surface), sweeping film cooling jets (for suction surface), and trailing edge slot cooling with microchannels. During the 2nd year, the reverse film cooling design was shown to be sub-optimal and work on that topic was halted. The three remaining technologies were integrated into a large scale nozzle guide vane and installed into a low-speed linear cascade facility for further interrogation. Initial results showed the sweeping film cooling jets (on the suction surface) to be the most promising technology compared to a baseline diffusion shaped film hole (777 design). The benefit was particularly evident at high blowing ratios (>1.5) when the 777 coolant film separated from the downstream surface. Benefits were also evident at elevated freestream turbulence levels. The leading edge cooling with unsteady jets was less effective in terms of peak or average cooling – however it was superior to round hole impingement cooling in terms of spatial uniformity. Finally, the trailing edge cooling design with micro-channels was scrapped in favor of a pinned arrangement with centerbody. During the 3rd year, the same three technologies were integrated into a transonic linear cascade for an assessment of compressibility effects. Again, the sweeping film cooling jets proved superior at high blowing ratios while the unsteady leading edge impingement and trailing edge pin-fins with centerbody designs yielded mixed results. Finally, during the 4th and final year, these 3 technologies were integrated into a direct metal laser sintered (DMLS) nozzle guide vane for testing in a high temperature, transonic annular vane cascade. The facility matches the flow temperature, Mach number, and coolant pressure ratios of an actual gas turbine. Before doing this, an additional series of tests were completed to validate a redesigned trailing edge cooling architecture. This final design included a centerbody with triangular pins between the centerbody and the vane external skin. The majority of these triangular pins are fabricated with a 30% gap to the centerbody – reducing their pressure drop considerably while still providing excellent heat transfer augmentation. This additional test campaign required an additional 3-month extension request to complete testing in the high temperature NGV test facility (Turbine Reacting Flow Rig – TuRFR). Testing of the DMLS vane in TuRFR pitted the 3 innovative cooling technologies against more traditional technologies (shaped 777 film hole, round impingement jet, and full pin arrangement in the trailing edge. The sweeping film cooling jets (on the suction surface) showed approximately 15% improvement in overall effectiveness compared to the 777 film hole while the trailing edge showed up to 20% improvement. The leading edge impingement was disappointing with a substantially lower effectiveness than traditional direct impingement. In summary, the study was successful in demonstrating that DMLS-enabled cooling technologies can yield significant gains in cooling performance.

03 NATURAL GAS↗
DOE OSTI2022

Seven Percent Critical Experiment Core Analysis Approach on Fuel Rods – Core Configurations T155-NoMo, and T155-397Mo.

A series of experiments will be performed to test the integral effects of molybdenum on the reactivity of a critical system. These experiments will use the 7uPCX assembly with the 1.55 cm triangular pitch grid plates. Molybdenum sleeves, consisting of 19.6 inch long 0.5-inch nominal outside diameter molybdenum tubes with 0.031-inch nominal wall thickness and centering hardware, will be placed on some of the fuel rods in the array. The purpose of this analysis is to examine two configurations of the 7uPCX using the 1.55 cm triangular pitch grid plates in fully-reflected approach-to-critical experiments with the number of fuel rods in the array as the approach parameter. This document presents the results of the analysis that was done to allow completion of the 7uPCX Configuration Checklist from Appendix A of SPRF-AP-005 [SNL 2020] for the cores noted above. The checklists for these cores are shown in Appendix A.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Exploring the Great Pyramid: Detector Technical Design Report with Stand-Alone Monte Carlo Simulations

Cosmic-ray muon imaging has been used to non-destructively examine the Pyramids of Khufu and Khafre on the Giza Plateau; the EGP project will continue this line of research by undertaking a full tomographic scan of the former and by doing so will increase the sensitivity of the technique by upwards of two orders of magnitude. For this purpose, a muon telescope using triangular (vernier) detector cells far outperforms one with rectangular cells, providing an angular and positional RMS improvement by a factor of 4 for the same cost per unit area. A refinement algorithm was developed to handle tracks that produce secondaries. The triangular detector yields a positional resolution for a back-projection to the center of the pyramid of less than 20 cm, ensuring that a feature large enough to be of significance will still be seen by the telescope. This method is shown to be able to accurately and precisely reconstruct tracks of muons that pass through the King s Chamber, Queen s Chamber, and Grand Gallery.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Neumann Series in MGS-GMRES and Inner-Outer Iterations: Preprint

A low-synchronization MGS-GMRES Krylov solver employing a truncated Neumann series for the inverse compact WY MGS correction matrix T is presented. A corollary to the backward stability result of Paige et al. [1] establishes that T = I - Lk is sufficient for convergence of GMRES when kLkp F = O("p)_p F (B), where the strictly lower triangular matrix L is defined by the inner products of Krylov vectors V T 1:k-2 vk-1. The preconditioner is the classical Ruge-Stuben AMG algorithm with compatible relaxation and inner-outer Gauss-Seidel smoother. This smoother may also be expressed as a truncated Neumann series. Drop tolerances are applied to the lower triangular matrices arising in the smoother in order to reduce the number of non-zeros and accelerate the time to solution. The number of small matrix elements are found to increase from fine to coarse levels and thus the effciency gains are greater for large problems with many levels in the V -cycle. The solver is applied to the pressure continuity equation for the incompressible Navier-Stokes equations. Unlike the inner-outer iteration, the solver convergence rate with the standard Gauss-Seidel smoother deteriorates with dropping. The solver compute time is reduced by up to 50% without a change in the convergence rate.

Gauss-Seidel smoother↗
DOE OSTI2022

Novel Solver Algorithms for Nearly Singular Linear Systems Arising in Combustion Modelling

Direct Numerical Simulations of realistic combustion devices are extremely challenging due to the wide separation of scales in the simulation, for example an internal combustion (IC) engine chamber, and the flame thickness of a high-pressure flame. The PeleLMeX solver uses adaptive mesh refinement (AMR) to evolve multi-species reacting flows in the low Mach number limit at the Exascale and relies on an embedded boundary (EB) approach to represent complex geometries. In that framework, the EB geometries often give rise to very small cut-cells along the boundary, which translate into extreme ill-conditioning of the pressure-projection, with eigenvalues that span 15-16 orders of magnitude. In this talk, we focus on the case of a typical IC piston bowl geometry for which we present on a novel approach towards solving these nearly singular linear systems with ILU-based, C-AMG smoothers on massively parallel architectures. In particular, we use scaling and equilibration algorithms to handle the non-normality of the upper triangular factors. This enables us to approximate the highly sequential triangular solve algorithm, embedded in the AMG smoothing-solve phase, with Jacobi iterations. This approximation can be written as a convergent Neumann series whose terms are composed of highly parallel sparse matrix vector multiplications. The result is an algorithm that substantially decreases setup and solve time, compared to state-of-the-art, for these challenging linear systems.

combustion modelling↗
DOE OSTI2023

Experiments to Measure the Effect of Tantalum on Critical Systems

Sandia National Laboratories (SNL) and Oak Ridge National Laboratory (ORNL) collaborated to develop a capability to test the epithermal/intermediate cross sections of materials at the SNL critical experiment facility using the Seven Percent Critical Experiment (7uPCX) fuel. As a result, a new set of critical experiments has been designed to target the epithermal cross sections of tantalum (Ta) and is scheduled to be performed at SNL in 2023. These critical experiments will be evaluated for inclusion in the 2024 edition of the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. The focus of these critical experiments is to measure the effects of Ta on the critical array size. The critical array size will be determined by an approach-to-critical experiment with the number of fuel rods in the array as a free parameter. The core configurations are designed to optimize the reactivity worth of Ta and the overall percentage of Ta absorption rates in the epithermal/intermediate energy range (0.625 eV – 100 keV). The baseline core configuration includes 7uPCX fuel rods set at a triangular pitch of 1.016 cm and a central dry test region that utilizes a cadmium liner for filtering out thermal neutrons. The central test region has locations for 85 Ta rods set at a triangular pitch of 0.813 cm. The Ta reactivity worth for the case with 85 Ta rods is approximately 2.55%, with the percentage of Ta absorption rates within the intermediate energy range at nearly 90%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Hole‐Carrier‐Dominant Transport in 2D Single‐Crystal Copper

Abstract In 2D noble metals like copper, the carrier scattering at grain boundaries has obscured the intrinsic nature of electronic transport. However, it is demonstrated that the intrinsic nature of transport by hole carriers in 2D copper can be revealed by growing thin films without grain boundaries. As even a slight deviation from the twin boundary is perceived as grain boundaries by electrons, it is only through the thorough elimination of grain boundaries that the hidden hole‐like attribute of 2D single‐crystal copper can be unmasked. Two types of Fermi surfaces, a large hexagonal Fermi surface centered at the zone center and the triangular Fermi surface around the zone corner, tightly matching to the calculated Fermi surface topology, confirmed by angle‐resolved photoemission spectroscopy (ARPES) measurements and vivid nonlinear Hall effects of the 2D single‐crystal copper account for the presence of hole carriers experimentally. This breakthrough suggests the potential to manipulate the majority carrier polarity in metals by means of grain boundary engineering in a 2D geometry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Density estimation via measure transport: Outlook for applications in the biological sciences

Abstract One among several advantages of measure transport methods is that they allow or a unified framework for processing and analysis of data distributed according to a wide class of probability measures. Within this context, we present results from computational studies aimed at assessing the potential of measure transport techniques, specifically, the use of triangular transport maps, as part of a workflow intended to support research in the biological sciences. Scenarios characterized by the availability of limited amount of sample data, which are common in domains such as radiation biology, are of particular interest. We find that when estimating a distribution density function given limited amount of sample data, adaptive transport maps are advantageous. In particular, statistics gathered from computing series of adaptive transport maps, trained on a series of randomly chosen subsets of the set of available data samples, leads to uncovering information hidden in the data. As a result, in the radiation biology application considered here, this approach provides a tool for generating hypotheses about gene relationships and their dynamics under radiation exposure.

gene expression data↗
DOE OSTI2022

Static and dynamic magnetic properties of the spiin-$\frac{5}{2}$triangle lattice antiferromagnet Na 3 Fe(PO 4 ) 2 studied by 31 P NMR

We report 31 P nuclear magnetic resonance (NMR) measurements have been carried out to investigate the magnetic properties and spin dynamics of Fe 3+ (S = 5/2) spins in the two-dimensional triangular lattice (TL) compound Na 3 Fe(PO 4 ) 2 . The temperature (T) dependence of nuclear spin-lattice relaxation rates (1/T 1 ) shows a clear peak around Néel temperature, T N = 10.9 K, corresponding to an antiferromagnetic (AFM) transition. From the temperature dependence of NMR shift (K) above T N , an exchange coupling between Fe 3+ spins was estimated to be J/k B ≃ 1.9 K using the spin-5/2 Heisenberg isotropic-TL model. The temperature dependence of 1/T 1 T divided by the magnetic susceptibility (χ), 1/T 1 T χ , above T N proves the AFM nature of spin fluctuations below ~50 K in the paramagnetic state. In the magnetically ordered state below T N , the characteristic rectangular shape of the NMR spectra is observed, indicative of a commensurate AFM state in its ground state. The strong temperature dependence of 1/T 1 in the AFM state is well explained by the two-magnon (Raman) process of the spin waves in a 3D antiferromagnet with a spin-anisotropy energy gap of 5.7 K. The temperature dependence of sublattice magnetization is also well reproduced by the spin waves. Those results indicate that the magnetically ordered state of Na 3 Fe(PO 4 ) 2 is a conventional 3D AFM state, and no obvious spin frustration effects were detected in its ground state

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

A data-driven approach to real-time vertical position estimation for NSTX-U vertical stability control

In this paper, a database of 77 996 plasma equilibrium reconstructions from 727 discharges during the initial operation of the NSTX-U spherical tokamak is analyzed to develop a statistically robust model of the plasma vertical position for real-time control. A variety of regression models are developed and tested, ranging in complexity from linear models to deep neural networks, and including input signals ranging from the four pairs of flux loops used historically on NSTX-U up to the full set of 389 real-time signals available to the plasma control system. A linear model based on 140 real-time magnetics signals is found to offer excellent accuracy, with a coefficient of determination R 2 = 0.906. The robustness of this model to limited training data, new operating scenarios, and signal errors is tested, and a procedure is demonstrated to tune the model parameters to optimize its robustness. A time-dependent plasma equilibrium solver, TokaMaker, is used to simulate vertical stability control in NSTX-U, demonstrating that it should be possible to iteratively tune the parameters of a linear vertical position model to stabilize both positive and negative triangularity plasmas in future experiments.

magnetic diagnostics↗
DOE OSTI2022

Radiative pulsed L-mode operation in ARC-class reactors

Abstract A new ARC-class, highly-radiative, pulsed, L-mode, burning plasma scenario is developed and evaluated as a candidate for future tokamak reactors. Pulsed inductive operation alleviates the stringent current drive requirements of steady-state reactors, and operation in L-mode affords ELM-free access to ∼ 90 % core radiation fractions, significantly reducing the divertor power handling requirements. In this configuration the fusion power density can be maximized despite L-mode confinement by utilizing high-field to increase plasma densities and current. This allows us to obtain high gain in robust scenarios in compact devices with P fus > 1000 MW despite low confinement. We demonstrate the feasibility of such scenarios here; first by showing that they avoid violating 0D tokamak limits, and then by performing self-consistent integrated simulations of flattop operation including neoclassical and turbulent transport, magnetic equilibrium, and radiofrequency current drive models. Finally we examine the potential effect of introducing negative triangularity with a 0D model. Our results show high-field radiative pulsed L-mode scenarios are a promising alternative to the typical steady state advanced tokamak scenarios which have dominated tokamak reactor development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

MHD stability analysis against pressure and current-driven modes in the SMall Aspect Ratio Tokamak

Linear magnetohydrodynamic (MHD) simulations for the SMall Aspect Ratio Tokamak (SMART) have been carried out for the first time, for both positive (PT) and negative triangularity (NT) shaped plasmas using the MARS-F code. The MHD stability of projected SMART plasmas against internal kinks, infernal modes and edge peeling-ballooning modes have been analyzed for a wide range of realistic equilibria. A stabilization of internal kinks and infernal modes is observed when increasing the safety factor profile and reducing plasma beta. PT shaped plasmas are more stable against both internal kinks and infernal modes than their counterpart NT shaped plasmas. Toroidal flows have little impact on the MHD stability of the internal kinks, but they have a strong stabilizing effect on infernal modes, which can be further mitigated in NT shaped plasmas. The MHD stability of peeling-ballooning modes is reduced in NT shaped plasmas, as observed in conventional tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗