Search NASA⌕ Search

SEARCH · Search NASA

Results for “unit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The Carbon Budget of Land Conversion: Sugarcane Expansion and Implications for a Sustainable Bioenergy Landscape in Southeastern United States

The expansion of sugarcane onto land currently occupied by improved (IMP) and semi-native (SN) pastures will reshape the U.S. bioenergy landscape. We combined biometric, ground-based and eddy covariance methods to investigate the impact of sugarcane expansion across subtropical Florida on the carbon (C) budget over a 3-year rotation. With 2.3- and 5.1-fold increase in productivity over IMP and SN pastures, sugarcane displayed a C use efficiency (CUE; i.e., fraction of gross C uptake allocated to plant growth) of 0.59, well above that of pastures (0.31–0.23). Sugarcane also had greater C allocation to aboveground productivity and hence, harvestable biomass relative to IMP and SN. Cane heterotrophic respiration over the 3-year rotation (903 ± 335 gC m −2 year −1 ) was 1% and 14% higher than IMP and SN pastures, respectively. These soil C losses responded largely to disturbance over the first year after conversion (1510 ± 227 gC m −2 year −1 ) but declined in subsequent years to an average 599 ± 90 gC m −2 year −1 —well below those of IMP (933 ± 140 gC m −2 year −1 ) and SN (759 ± 114 gC m −2 year −1 ) pastures—despite a significant 40%–61% increase in soil C inputs. Soil C inputs, however, shifted from root-dominated in pastures to litter-dominated in sugarcane, with only 5% C allocation to roots. Reduced decomposition rates in sugarcane were likely driven by changes in the recalcitrance and distribution rather than the size of the newly incorporated soil C pool. As a result, we observed a rapid shift in the net ecosystem C balance (NECB) of sugarcane from a large source immediately following conversion to approaching the net C losses of IMP pastures only 2 years after conversion. The environmental cost of converting pasture to sugarcane underscores the importance of implementing management practices to harness the soil C storage potential of sugarcane in advancing a sustainable bioeconomy in Southeastern United States.

09 BIOMASS FUELS↗
DOE OSTI2025

Life‐cycle greenhouse gas emissions associated with nuclear power generation in the United States

Under the 2022 Inflation Reduction Act, tax credits of up to $3/kgH 2 are available to hydrogen producers if they generate emissions at levels below 0.45 kgCO 2 e/kgH 2 , spurring producers to explore how hydrogen production via electrolysis using electricity generated by nuclear power may qualify for such tax credits. With uranium as a primary fuel for nuclear power plants (NPPs) and no on-site emissions, the upstream emissions associated with nuclear fuel supply chains largely determine the carbon intensity of nuclear energy. Using the GREET (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model, we evaluated the life-cycle greenhouse gas (GHG) emissions of uranium production and the use of uranium to generate electricity in light water reactor (LWR) NPPs. We evaluated the process chemicals and energy inputs throughout the nuclear fuel supply chain to identify the major contributors to nuclear fuel cycle GHG emissions. Such emissions are estimated at 3.0 gCO 2 e/kWh at NPPs in the United States. The greatest share of nuclear fuel cycle GHG emissions—comprising 53% of total emissions—are associated with electricity consumption throughout the fuel supply chain. We extended the analysis to include an evaluation of the carbon intensity of H 2 production via electrolysis using nuclear power from LWRs. Finally, we examined the impact of future (2035 and 2050) electricity supply chain scenarios on nuclear fuel cycle GHG emissions. Our analysis revealed a decrease of 33% (2035) and 46% (2050) in the carbon intensity of nuclear electricity relative to current nuclear fuel cycle GHG emissions.

greenhouse gas emissions↗
DOE OSTI2026

Frequency-Nadir-Constrained Unit Commitment for Low-Inertia, High-IBR Island Power Systems [Slides]

The process of energy decarbonization in island power systems is accelerated due to the swift integration of inverter-based renewable energy resources (IBRs). The unique features of such systems, including rapid frequency changes resulting from potential generation outages or imbalances due to the unpredictability of renewable power, pose a significant challenge in maintaining the frequency nadir without external support. This paper presents a unit commitment (UC) model with data-driven frequency nadir constraints, including either frequency nadir or minimum inertia requirements, helping to limit frequency deviations after significant generator outages. The constraints are formulated using a linear regression model that takes advantage of real-world, year-long generation scheduling and dynamic simulation data. The efficacy of the proposed UC model is verified through a year-long simulation in an actual island power system using historical weather data. The alternative minimum inertia constraint, derived from actual system operation assumptions, is also evaluated. Findings demonstrate that the proposed frequency nadir constraint notably improves the system's frequency nadir under high photovoltaic (PV) penetration levels, albeit with a slight increase in generation costs, when compared to the alternative minimum inertia constraint.

14 SOLAR ENERGY↗
DOE OSTI2025

A parcel-level evaluation of distributed wind opportunity in the contiguous United States

This study examines the potential for distributed wind (DW) energy across the contiguous United States, leveraging advancements in the National Renewable Energy Laboratory's distributed wind model, dWind. The novel modeling approach described here utilizes a high-resolution dataset and analyzes over 150 million parcels, a significant improvement from prior methods that extrapolated results from a smaller random sample. This achievement is enabled through key model performance improvements, such as transitioning to multiprocessing, which reduces runtime by 97 %. This optimized, high-resolution approach allows the inspection of technology deployment potential and impact on a variety of scales tailored to individual properties and regions. The results here align with prior work showing substantial opportunity for energy generation using DW technologies. Key findings reveal a substantial increase from prior results in estimated technical and economic potential for DW. Metrics tuned to highlight economic potential also show increased incentives supporting rural adoption. Results are spatially aggregated for usability and published via the U.S. Department of Energy Wind Data Portal and a custom scenario visualization platform, aiding policymakers, industry, and property owners in assessing DW viability across various scenarios and spatial scales.

17 WIND ENERGY↗
DOE OSTI2026

Investigating the opioid epidemic across the United States: Associations between county-level characteristics and overdose mortality

The opioid crisis remains a critical public health challenge in the United States. Despite national efforts that reduced opioid prescribing by nearly 44% between 2011 and 2021, opioid overdose deaths more than tripled during the same period. This alarming trend reflects a major shift in the crisis, with illegal opioids now driving the majority of overdose deaths instead of prescription opioids. Although supply-side factors fueling this transition have been widely studied, the structural and community-level conditions that shape overdose mortality are less well understood. To help address this gap, this study has three primary objectives: (1) overcome structural gaps in national data to construct a complete nationwide county-level dataset from 2010 to 2022; (2) using data analysis, identify and investigate spatiotemporal anomalies in overdose mortality; and (3) using two machine-learning models, quantify the importance of thirteen social vulnerability variables in predicting overdose mortality. Our results identify unemployment and limited vehicle access as key county-level predictors of overdose mortality. Higher levels of these vulnerabilities are associated with elevated mortality, whereas lower levels are associated with reduced mortality. These findings highlight factors that may be relevant for public health planning and policy prioritization within the context of the opioid crisis.

Anomaly analysis↗
DOE OSTI2025

Enabling Multireference Calculations on Multimetallic Systems with Graphic Processing Units

Modeling multimetallic systems efficiently enables faster prediction of desirable chemical properties and the design of new materials. This work describes an initial implementation for performing multireference wave function method localized active-space self-consistent field (LASSCF) calculations through the use of multiple graphics processing units (GPUs) to accelerate time-to-solution. Density fitting is leveraged to reduce memory requirements, and we demonstrate the ability to fully utilize multi-GPU compute nodes. Performance improvements of 5–10x in total application runtime were observed in LASSCF calculations for multimetallic catalyst systems up to 1200 AOs and an active space of (22e,40o) using up to four NVIDIA A100 GPUs. Furthermore, written with performance portability in mind, a comparable performance is also observed in early runs on the Aurora exascale system using Intel Max Series GPUs.

Algorithms↗
DOE OSTI2026

TRIZ-Based Design Improvement for Facilitating Transmission Control Unit Remanufacturing

Design for Remanufacturing (DfRem) centers on enhancing product design and operations to facilitate remanufacturing while increasing both economic and environmental sustainability. DfRem requires a comprehensive understanding of product characteristics, production conditions, and operational constraints. Thus, DfRem requires a systematic methodology to identify and implement alternative designs. Among many critical steps in remanufacturing, disassembly is essential because it directly supports remanufacturing by separation of product components for cleaning, inspection, and other subsequent process steps. This study proposes a TRIZ-based framework to improve product design for disassembly in support of remanufacturing. The framework is applied to a transmission control unit (TCU) case study. The current TCU design prevents remanufacturing due to the sealant-based component joinery, which complicates disassembly and risks damaging the printed circuit board (PCB). After defining technical contradictions for the TCU product design and reviewing the suggested TRIZ principles to solve the conflicts, a cantilever snap-fit design alternative is developed. The economic feasibility of the snap-fit design is assessed by comparing the current and snap-fit design costs for three life cycles. The cost analysis demonstrates that the cost of the snap-fit design remains the same as the current design. Additionally, the snap-fit design offers substantial cost savings for three life cycles compared to the current design. We demonstrate how snap-fit design supports both environmental and economic sustainability.

42 ENGINEERING↗
DOE OSTI2025

Benchmarking Near-Surface Winds in the HRRR Analyses Using Multisource Observations over Complex Terrain in the Southeastern United States

Wind energy plays a crucial role in sustainable power generation, yet its full potential in the southeast United States (SEUS) remains underexplored. This study advances wind resource assessment in the SEUS using existing regional modeling and multisource observations. We find that terrain complexity, influenced by orography and forest canopy, significantly impacts the accuracy of modeled wind speed. While the High-Resolution Rapid Refresh (HRRR) model effectively simulates wind profiles over flat, nonforested terrain, larger errors are produced above forest canopies, and particularly for those stands in hilly and mountainous terrain where there are no observations aloft that could be used by HRRR’s data assimilation software. Seasonal variations, e.g., changes in the leaf area index, further complicate the relationship between terrain complexity and simulation errors. Here, our findings emphasize the critical need for comprehensive wind profile measurements, extending from below the canopy to height above the canopy and through the lower planetary boundary layer, to fully quantify model performance over and near forests, and for improving wind resource assessment, planning, and management. This study provides valuable insights not only for further model development but also for future field campaign deployment with the goal of further improving our understanding of wind resources in the region.

Complex terrain↗
DOE OSTI2025

Comparisons of Montane Snow Water Equivalent Projections: Calculating Total Snow Mass in Regions with Projection Agreement and Divergence in the Western United States

Montane snowpack is a vital source of water in the western United States. Here, we use a large-ensemble approach to evaluate the agreement across 124 snow water equivalent (SWE) projections with statistically downscaled forcing between end-of-century (2076–95) and early twenty-first century (2106–35) periods. Comparisons were performed on dates corresponding with the end of winter (15 April) and midspring snowmelt (15 May) in five western U.S. domains. Using 1) the percent change to end-of-century SWE across different ensembles of snow projections and 2) the shift between early twenty-first century and end-of-century SWE distributions for each snow projection, we identified relationships between projections that were consistent across each domain. In low to midelevations, end-of-century SWE decreases were 48% and larger on 15 April. These regions had projected changes to SWE that were both high confidence and in relative agreement across projections. Despite this, the majority of 15 April SWE volume existed in higher elevations where the magnitude and direction (positive or negative) of SWE changes were most uncertain. The results of this study show that large-ensemble approaches can be used to measure coherence between snow projections and identify 1) the highest confidence changes to future snow water resources and 2) the locations and periods where and when improvements to snow projections would most benefit estimates of future snow water resources.

Climate models↗
DOE OSTI2026

Impact of hydropower availability on resource adequacy of the United States western interconnection

Hydropower is a key energy source in the western interconnection of the United States, comprising about 25% of the annual installed nameplate capacity in 2020. However, its generation is increasingly impacted by changing hydrological conditions, operational constraints, environmental factors, water availability, and aging dam infrastructure. Assessing hydropower availability and resource adequacy is valuable for shaping energy policies and infrastructure requirements. In this study we evaluate the sensitivity of resource adequacy in the Western Interconnection to the unavailability of hydropower plants, under a wide-ranging set of 16,384 hydropower loss scenarios derived from a combination of 14 major hydrologic regions. Although a complete loss of hydropower capacity in any region is unlikely, studying such scenarios helps in identifying hydrologic regions most critical for maintaining resource adequacy. So, we identify key hydrologic regions with disproportionately large adequacy impacts relative to their installed hydropower capacity and study compounding effects between regions using classification and regression trees. Even after controlling for total installed capacity, we find that hydropower resources in the Pacific Northwest contribute the most to interconnection-wide adequacy outcomes, with resources in Northern California and the Desert Southwest providing more moderate incremental contributions.

13 HYDRO ENERGY↗
DOE OSTI2026

The 10 September 2025 M w 4.1 Earthquake in Northeastern Utah, United States: An Archetypal Continental Mantle Event

The 10 September 2025 M w 4.1 earthquake in northeastern Utah, United States, had a focal depth 68 km beneath sea level, which is ∼20–25 km greater than estimates of local crustal thickness, making it a rare example of a continental mantle earthquake (CME). The focal depth is well resolved from arrival-time inversion (nearest station ∼13 km away) and moment tensor inversion of regional waveforms. Similar to other CMEs in the Intermountain West, there were no obvious aftershocks or foreshocks, and the waveforms were enriched in high-frequency energy. Spectral modeling gives a stress drop of ∼80 MPa and a radiation efficiency of ∼0.08, albeit with large uncertainties. The high stress drop and low radiation efficiency are consistent with a dissipative source process such as thermal runaway. Also similar to previous Intermountain West CMEs, the event occurred along the boundary of the Archean Wyoming craton, where pressure–temperature conditions favor ductile deformation. We hypothesize that edge-driven or regional-scale mantle convection produces increased strain rates near the craton boundary that make either conventional brittle failure or thermal runaway feasible at relatively high pressure–temperature conditions. High conductivity inferred around the edge of the craton may suggest that fluids also contribute to CME occurrence.

Koper, Keith D. [Univ. of Utah, Salt Lake City, UT↗
DOE OSTI2025

Extending SST vanadis to Add SIMT Functional Units

Sandia National Laboratories is currently investigating scalable architectural simulation capabilities, with a focus on simulating and evaluating highly scalable supercomputers for high-performance computing applications. This exploration is driven by the shift toward more specialized forms of compute and the need for a more diverse set of accurate models. This project will explore the use of General-Purpose Graphical Processing Units (GPGPUs) in high-performance computing using both physical systems and new simulator models – traditional GPUs as well as tightly-coupled SIMT accelerators.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Decision support for United States—Canada energy integration is impaired by fragmentary environmental and electricity system modeling capacity

The renewable energy transition is leading to increased electricity trade between the United States and Canada, with Canadian hydropower providing firm lower-carbon power and buffering variability of wind and solar generation in the U.S. However, long-term power purchase agreements and transborder transmission projects are controversial, with two of four proposed transmission lines between Quebec, Canada and the northeast U.S. cancelled since 2018. Here, we argue that controversies are exacerbated by a lack of open-source data and tools to understand tradeoffs of new hydropower generation and transmission infrastructure in comparison to alternatives. This gap includes impacts that incremental transmission and generation projects have on the economics of the entire system, for example, how new transmission projects affect exports to existing markets or incentivize new generation. We identify priority areas for data synthesis and model development, such as integrating linked hydropower and hydrologic interactions in energy system models and openly releasing (by utilities) or back-calculating (by researchers) hydropower generation and operational parameters. Publicly available environmental (e.g. streamflow, precipitation) and techno-economic (e.g. costs, reservoir size,) data can be used to parameterize freely usable and extensible models. Existing models have been calibrated with operational data from Canadian utilities that are not publicly available, limiting the range of scientific and commercial questions these tools have been used to answer and the range of parties that have been involved. Studies conducted using highly resolved, national-scale public data exist in other countries, notably, the United States, and demonstrate how greater transparency and extensibility can drive industry action. Improved data availability in Canada could facilitate approaches that (1) increase participation in decarbonization planning by a broader range of actors; (2) allow independent characterizations of environmental, health, and economic outcomes of interest to the public; and (3) identify decarbonization pathways consistent with community values.

13 HYDRO ENERGY↗
DOE OSTI2025

Low Cost High-Performance HRE-Free 3-in-1 Electric Drive Unit

The project team completed work to expand upon American Axle & Manufacturing’s (AAM) baseline technology and develop a high-speed, AC induction electric drive unit (EDU) with total direct-oil-cooling and integrated power electronics. The project accelerated advancements in EDU technology by allowing AAM to build upon the progress made in developing the underlying baseline technologies. The following seven improvements to AAM’s baseline technology were implemented in this research and development program: 1) Increased speed (30k RPM) AC induction motor, 2) Silver-sintering of discrete silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFET) to heat sinks, 3) Electrically insulated rotor bars, 4) Optimized lamination steel, 5) EDU-integrated 650VDC inverter package, 6) Over-molded stator with molded liners, and 7) 650VDC power-dense stator design. The successful development of the technology resulted in a meaningful cost reduction for EDU systems in the market. Coupled with falling battery system costs, lower EDU costs will likely accelerate the market acceptance and related production scaling of battery electric vehicles. The objective of this project was to research, develop, and test a Heavy Rare Earth (HRE)-free 3-In-1 electric drive unit (EDU) that has class leading power density and cost. The key technologies to be developed were anticipated to meet or exceed the Department of Energy (DOE) targets of a cost ≤ $\$$7/kilowatt (kW), power density ≥ 12 kW/liter, and operating voltage ≥ 600 VDC.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Slug Test Characterization Results for the Upper Three Runs Aquifer at the Chemicals, Metals, and Pesticides Pits Operable Unit

Slug tests were performed on 21 wells screened within the Upper Three Runs aquifer (UTRA) at the Chemical, Metals, and Pesticide (CMP) Pits Operable Unit (OU) to determine unit-specific hydraulic properties. The UTRA is the water table aquifer at CMP Pits and is comprised of three discrete zones that are separated by two semi-continuous confining zones. These zones include the transmissive zone (TZ, unconfined), the middle aquifer zone (MAZ, semi-confined), and the lower aquifer zone (LAZ, semi-confined). The LAZ, the most substantial portion of the UTRA in the area, extends vertically to the green clay confining zone (GCCZ). A subset of wells from each zone was selected for slug testing. The objective of the project was to determine hydraulic properties of the three zones of the UTRA for use in future updates to the CMP pits groundwater flow and contaminant transport modeling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Notice of Illegal Foreign Pesticides Entering the United States: Information Bulletin v.01

This information bulletin is intended to generate a heightened awareness of illicit pesticide importation, distribution, and use in the United States. This bulletin focuses on solid, fumigant materials which are primarily used in the production of marijuana growth and cultivation. Exposure to illicit pesticides, fumigant fumes, or residual materials may pose a public health and officer safety concern. Many illegal fumigant pesticide products have been seized and determined to consist of a mixture of several pesticides and is often in contrast with the pesticide labelling. This information bulletin is not a complete account of all illegal pesticides found in country; it serves to highlight frequently encountered materials and present patterns in product presentation, packaging, and shipment containment which are intended to aid in identification and intervention. Other varieties of illegal pesticide fumigants are known to exist, and additional variations are expected to be encountered in policing intervention. This bulletin includes information on the presentation of illegal pesticides, label review recommendations, a field reference guide, which includes example photographs of seized pesticide/fumigants and their labels, and related United States federal regulation information, including relevant tariff code information for reference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Summertime methane and carbon dioxide emission rates and associated variables from a national-scale survey of 146 reservoirs in the United States, 2016-2023

Reservoirs are globally important sources of greenhouse gases, but the magnitude of their emissions is highly uncertain. Here we present data for 146 reservoirs from two surveys of reservoir methane and carbon dioxide emissions, one at the regional scale in the midwestern United States and one at the national scale in the conterminous United States, plus data from one reservoir in Washington and another in Puerto Rico. At all reservoirs, ebullitive and diffusive emissions and basic physiochemistry were measured at 15-70 locations during one 22 to 64-hour period during the summers of 2016-2023, with four reservoirs revisited a second time. Concomitant water chemistry measurements were also made at an index site. The dataset is comprised of two geospatial files and seven .csv files containing greenhouse gas emissions, water chemistry, morphology, and other relevant data. These data comprise the largest multi-reservoir emissions dataset ever assembled using consistent measurement methods.

Beaulieu, Jake [University of Notre Dame, IN]↗