Deep learning predicts microbial interactions from self-organized spatiotemporal patterns
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
To facilitate the provision of electric vehicle charging stations (EVCS) in urban areas, this study investigates the benefits of co-locating fleet-owned chargers with public charging stations to enable construction incentives and cord-sharing cost savings. Shared EVCS can serve charging demand from both user types: private (household) EV owners and those managing fleet vehicles – like shared and fully automated EV (SAEV) fleets. Using POLARIS to simulate all person-travel across the 6-county Austin, Texas region, new EVCS were sited and sized with DC fast-charging (DCFC) plugs to lower operating and construction costs while providing public + private (PP) service across an 81-square-mile core geofence (where 200 SAEVs were active) over 24-hour days. When co-location is permitted, 115 DCFC cords were added to the 23 existing (publicly available) stations to enable SAEVs and household EVs (HHEVs) charging access, within the geofence. Each 250-mile-range SAEV was simulated to travel an average of 330 miles per day, serve over 92 person-trips, and recharge 2.7 times a day (for 2.4 h per session). The new DCFC plugs were primarily added to public EVCS at shopping centers and schools, and in residential settings along freeways. The average plug served 4.8 EVs per day. Most co-located PP EVCS permitted immediate (no-wait) charging, except for 2 stations along freeways that averaged 8 min of wait time to begin charging. In conclusion, the co-location strategy lowered fleet owners’ initial EVCS construction costs by 12 % (thanks to cord-sharing to avoid cord duplication), while reducing SAEV wait times to just 3.1 min (versus 10.7 min if SAEV managers had to build and operate their own EVCS).
Designing and carrying out a controlled human infection (CHI) model for hepatitis C virus (HCV) is critical for vaccine development. However, key considerations for a CHI model protocol include understanding of the earliest viral-host kinetic events during the acute phase and susceptibility of the viral isolate under consideration for use in the CHI model to antiviral treatment before any infections in human volunteers can take place. Humanized mouse models lack adaptive immune responses but provide a unique opportunity to obtain quantitative understanding of early HCV kinetics and develop mathematical models to further understand viral and innate immune response dynamics during acute HCV infection. We show that the models reproduce the measured HCV kinetics in humanized mice, which are consistent with early acute HCV-host dynamics in immunocompetent chimpanzees. Our findings suggest that humanized mice are well-suited to support development of a CHI model. In-silico and in-vivo modeling estimates provide a starting point to characterize candidate viruses for testing in CHI model studies.
Each year renewable energy generation increases notably with solar panel installations, but these panels have a limited lifespan and will produce between 2 and 4 million metric tons of waste by 2040. Similarly, there are currently between 20 to 70 million hard-disk drives (HDDs) reaching end-of-life (EOL) annually. The circular economy (CE) strives to recycle and reuse materials that are rare and expensive to obtain, minimizing waste. However, studying the potential circularity of photovoltaics (PV) and HDDs requires various data, for instance, on the maturity of the secondhand markets. In this context, the objective of the present study is to identify the current state of secondhand PV and HDD markets. After conducting a literature review, an automated data collection process was set up for that purpose. The analysis of the literature and collected data assess the maturity of the secondhand PV modules and HDDs markets and highlight differences between them.
The United States currently produces about 1 million metric ton of ocean plastic pollution annually. One proposed solution to combat plastic waste is a circular economy (CE), which aims to transition from today's take-make-waste linear pattern of production and consumption to a system where the value of resources is maximized over time. Two key methods in industrial ecology are useful in assessing the viability of CE: (1) System Dynamics (SD) and (2) Agent Based Modeling (ABM). In prior work, the plastic life cycle was modeled with SD and ABM. The two models calculate recycling rates and costs in different ways, making it difficult to pinpoint necessary next steps. We integrate the ABM and SD models - linking the emergent patterns from micro-level human decisions to system level processes - which allows a more comprehensive understanding of feedbacks, costs, and environmental impacts. The integrated model is more accurate, and can be used to visualize recycling rates and human health and environmental impacts over time. The difference between the integrated and original SD model prompts a Sobol sensitivity analysis, which is used to understand which behavioral factors most affect plastic recycling patterns. We find that the habitual component is typically the most influential in promoting positive recycling behavior. Additionally, we utilize the combined model to understand and visualize how various behavioral intervention scenarios, like improved access to recycling programs and cart tagging, influence recycling patterns; these results can guide future policy-making.
Efficient dynamic ride-matching (DRM) in large-scale transportation systems is a key driver in transport simulations to yield answers to challenging problems. Although the DRM problem is simple to solve, it quickly becomes a computationally challenging problem in large-scale transportation system simulations. Therefore, this study thoroughly examines the DRM problem dynamics and proposes an optimization-based solution framework to solve the problem efficiently. To benefit from parallel computing and reduce computational times, the problem’s network is divided into clusters utilizing a commonly used unsupervised machine learning algorithm along with a linear programming model. Then, these sub-problems are solved using another linear program to finalize the ride-matching. At the clustering level, the framework allows users adjusting cluster sizes to balance the trade-off between the computational time savings and the solution quality deviation. A case study in the Chicago Metropolitan Area, U.S., illustrates that the framework can reduce the average computational time by 58% at the cost of increasing the average pick up time by 26% compared with a system optimum, that is, non-clustered, approach. Another case study in a relatively small city, Bloomington, Illinois, U.S., shows that the framework provides quite similar results to the system-optimum approach in approximately 62% less computational time.
Microsimulation models (MSMs) are used to inform policy by predicting population-level outcomes under different scenarios. MSMs simulate individual-level event histories that mark the disease process (such as the development of cancer) and the effect of policy actions (such as screening) on these events. MSMs often have many unknown parameters; calibration is the process of searching the parameter space to select parameters that result in accurate MSM prediction of a wide range of targets. We develop Incremental Mixture Approximate Bayesian Computation (IMABC) for MSM calibration which results in a simulated sample from the posterior distribution of model parameters given calibration targets. IMABC begins with a rejection-based ABC step, drawing a sample of points from the prior distribution of model parameters and accepting points that result in simulated targets that are near observed targets. Next, the sample is iteratively updated by drawing additional points from a mixture of multivariate normal distributions and accepting points that result in accurate predictions. Posterior estimates are obtained by weighting the final set of accepted points to account for the adaptive sampling scheme. We demonstrate IMABC by calibrating CRC-SPIN 2.0, an updated version of a MSM for colorectal cancer (CRC) that has been used to inform national CRC screening guidelines.
It is widely believed that one’s peers influence product adoption behaviors. This relationship has been linked to the number of signals a decision-maker receives in a social network. But it is unclear if these same principles hold when the “pattern” by which it receives these signals vary and when peer influence is directed towards choices which are not optimal. To investigate that, we manipulate social signal exposure in an online controlled experiment using a game with human participants. Each participant in the game decides among choices with differing utilities. We observe the following: (1) even in the presence of monetary risks and previously acquired knowledge of the choices, decision-makers tend to deviate from the obvious optimal decision when their peers make a similar decision which we call the influence decision, (2) when the quantity of social signals vary over time, the forwarding probability of the influence decision and therefore being responsive to social influence does not necessarily correlate proportionally to the absolute quantity of signals. To better understand how these rules of peer influence could be used in modeling applications of real world diffusion and in networked environments, we use our behavioral findings to simulate spreading dynamics in real world case studies. We specifically try to see how cumulative influence plays out in the presence of user uncertainty and measure its outcome on rumor diffusion, which we model as an example of sub-optimal choice diffusion. Together, our simulation results indicate that sequential peer effects from the influence decision overcomes individual uncertainty to guide faster rumor diffusion over time. However, when the rate of diffusion is slow in the beginning, user uncertainty can have a substantial role compared to peer influence in deciding the adoption trajectory of a piece of questionable information.
There is large interest in networked social science experiments for understanding human behavior at-scale. Significant effort is required to perform data analytics on experimental outputs and for computational modeling of custom experiments. Moreover, experiments and modeling are often performed in a cycle, enabling iterative experimental refinement and data modeling to uncover interesting insights and to generate/refute hypotheses about social behaviors. The current practice for social analysts is to develop tailor-made computer programs and analytical scripts for experiments and modeling. This often leads to inefficiencies and duplication of effort. In this work, we propose a pipeline framework to take a significant step towards overcoming these challenges. Our contribution is to describe the design and implementation of a software system to automate many of the steps involved in analyzing social science experimental data, building models to capture the behavior of human subjects, and providing data to test hypotheses. The proposed pipeline framework consists of formal models, formal algorithms, and theoretical models as the basis for the design and implementation. We propose a formal data model, such that if an experiment can be described in terms of this model, then our pipeline software can be used to analyze data efficiently. The merits of the proposed pipeline framework is elaborated by several case studies of networked social science experiments.
Data supporting the paper "Impact of climate change on adaptive management decisions in the face of water scarcity" in the Journal of Hydrology.
This work describes the Grid-Enhanced, Mobility-Integrated Network Infrastructures for Extreme Fast Charging (GEMINI) architecture for the co-simulation of distribution and transportation systems to evaluate EV charging impacts on electric distribution systems of a large metropolitan area and the surrounding rural regions with high fidelity. The current co-simulation is applied to Oakland and Alameda, California, and in future work will be extended to the full San Francisco Bay Area. It uses the HELICS co-simulation framework to enable parallel instances of vetted grid and transportation software programs to interact at every model timestep, allowing high-fidelity simulations at a large scale. This enables not only the impacts of electrified transportation systems across a larger interconnected collection of distribution feeders to be evaluated, but also the feedbacks between the two systems, such as through control systems, to be captured and compared. The findings are that with moderate passenger EV adoption rates, inverter controls combined with some distribution system hardware upgrades can maintain grid voltages within ANSI C.84 range A limits of 0.95 to 1.05 p.u. without smart charging. However, EV charging control may be required for higher levels of charging or to reduce grid upgrades, and this will be explored in future work.
This study investigates the joint water–power system resilience of an irrigation district in southeastern Idaho. Irrigation districts face difficulties in the delivery of water to farmers under drought conditions, during equipment failures, or unplanned infrastructure disruptions. The resilience of interconnected water and power systems can be better analyzed and understood through an integrated approach, using a model that connects the dependencies between the two halves of the system. Using a multi-agent system model capturing both water and power system components, as well as their linkages, we capture the interdependencies of these systems and highlight opportunities for improvement when faced with disruptions. Through simulation scenarios, we examine the system resilience using system performance, quantified as the percentage of met demand of the power and water system, when subjected to drought water year, an unforeseen water demand increase, power outage and dam failure. Scenario results indicate that the effects of low flow years are mostly felt in the power system; unexpected increases in water demand marginally impact irrigation system performance; dams and pumps present vulnerabilities of the system, causing substantial unmet demand during disruptions. Noting the interdependencies between the water–power system halves while leveraging an integrated simulation allows for an insightful analysis of the system impacts during disruptions.
Autonomous systems are being used in a multitude of areas at an increasing rate and require a high level of adaptivity and intelligence to operate safely, especially under faulty conditions. This paper introduces a novel genetic algorithm tailored for UAV trajectory replanning, with an improved execution time via search space reduction based on the operating conditions of the UAV and its remaining mission. A unique characteristic of the replanning agent is its fast-start and adaptive properties, pre-seeding candidates with partial solutions and dynamically tuning elitism, crossover, and mutation rates in correspondence to the average fitness and diversity of the population. A population restart mechanism and early stopping mechanism are evaluated as well to assess their effect on solution quality and runtime. Previous work on genetic algorithms for UAV replanning were conducted with short trajectories in a small state space. Our UAV operates in a 56,000 square meter simulated urban environment, with static obstacles and a total of 53 possible waypoints. The agent increases the safety and reliability of UAV autonomy when operating under faulty conditions and when replanning is required.
This slide deck provides a high-level overview of wholesale electricity market design model development activities occurring at NREL. The motivation for this work, as well as the broader NREL modeling landscape in which it belongs, is first presented. Then the various model formulations and features are described.
This presentation provides an update on the dGen beta release as it approaches the full release in September 2020. The presentation includes the open source approach, updates for the open source, a dGen setup and demo, and the road map for the full release and upcoming reports.
The National Renewable Energy Laboratory (NREL) is analyzing the rapidly increasing role of energy storage in the electrical grid through 2050 through its Storage Futures Study. In one phase of the study, NREL used the laboratory's Distributed Generation Market (dGen) model to examine the various future distributed storage capacity adoption scenarios, results, and implications.
This talk presents the recent progress in building a predictive movement model for predicting conflict between soaring raptors and wind turbines. In particular, it details the recently developed numerical tool called Stochastic Soaring Raptor Simulator for simulating updraft-subsidized paths for soaring raptors through variety of wind conditions and the associated directional intent.
NREL presents recent progress in the development and validation of new eagle behavioral models, highlighting applications for wind-plant siting and operations. This webinar features talks focused on three areas: atmospheric modeling across the spatiotemporal scales of interest, facility-scale behavioral modeling, and turbine-scale data-driven behavioral modeling. A final presentation demonstrates micrositing as an application of our completely open-source analysis framework.