Search NASA⌕ Search

SEARCH · Search NASA

Results for “Air Transports”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Extinction of Premixed Counterflow Ammonia-Air Flames

The effects of radiative heat loss and pressure on premixed counterflow ammonia-air flames have been investigated as a function of equivalence ratio. Non-adiabatic counterflow premixed flame simulations incorporating detailed chemistry, transport and radiative heat transfer in the optically thin limit have been employed to elucidate important underlying physics and extinction characteristics. Non-adiabatic counterflow premixed computations show that the combined effects of positive flame stretch and radiative heat loss for sub-unity Lewis number mixtures lead to the extension of the lean flammability limit for ammonia-air flames, revealing a C-shaped curve near the lean flammability limit that exhibits both radiative-induced and stretch-induced extinction states. The computations compare favorably with the experimentally determined extinction stretch rate values for the stretch-induced extinction states over a wide range of equivalence ratios at different pressures up to 6 atm.

10 SYNTHETIC FUELS↗
DOE OSTI2021

The Atmospheric Carbon and Transport (ACT)-America Mission

The Atmospheric Carbon and Transport (ACT)-America NASA Earth Venture Suborbital Mission set out to improve regional atmospheric greenhouse gas (GHG) inversions by exploring the intersection of the strong GHG fluxes and vigorous atmospheric transport that occurs within the midlatitudes. In this study, two research aircraft instrumented with remote and in situ sensors to measure GHG mole fractions, associated trace gases, and atmospheric state variables collected 1,140.7 flight hours of research data, distributed across 305 individual aircraft sorties, coordinated within 121 research flight days, and spanning five 6-week seasonal flight campaigns in the central and eastern United States. Flights sampled 31 synoptic sequences, including fair-weather and frontal conditions, at altitudes ranging from the atmospheric boundary layer to the upper free troposphere. The observations were complemented with global and regional GHG flux and transport model ensembles. We found that midlatitude weather systems contain large spatial gradients in GHG mole fractions, in patterns that were consistent as a function of season and altitude. We attribute these patterns to a combination of regional terrestrial fluxes and inflow from the continental boundaries. These observations, when segregated according to altitude and air mass, provide a variety of quantitative insights into the realism of regional CO 2 and CH 4 fluxes and atmospheric GHG transport realizations. The ACT-America dataset and ensemble modeling methods provide benchmarks for the development of atmospheric inversion systems. As global and regional atmospheric inversions incorporate ACT-America’s findings and methods, we anticipate these systems will produce increasingly accurate and precise subcontinental GHG flux estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Initial Atmospheric Transport of Particles

A new version of the Initial Atmospheric Transport (IAT) model has been developed. This report fully characterizes the new model. IAT is designed to model heat release into the atmosphere that contains contaminated particles. The heat release forms a buoyant puff or plume. Buoyancy is quickly dissipated in 10's to 100's of seconds through drag and entrainment of ambient air. The final location of contaminant particles in the atmosphere after dissipation of abnormal heat is an important input to long term transportation codes such as the National Oceanic and Atmospheric Administration's (NOAA) Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) code. Ultimately the settling of contaminants after long term transport provides a basis for estimating health consequences. In comparison to the old version, the new model includes explicit simulation of particles, newly formulated equations of motion for a rising puff, and a new plume model. The plume model releases many instances of a single puff along a single trajectory in a way that balances energy released over a longer period than would be appropriate for a single puff. The puff model has additions for vorticity, turbulence, virtual mass, drag, and entrainment. The particle model leads to direct interfacing between IAT and the long-term transport code HYSPLIT. Previously, particle locations were given a pattern based on IAT's puff trajectory with no particle simulation. Now, particles are explicitly simulated, and 3-D spatial distributions of particles are output based on final positions. Ballistic particles are thrown outward at high velocity from explosive events and tend to hit the ground before the end of the simulation. Non-ballistic particles tend to get pulled into the rising puff s ring of vorticity with some escaping to ambient conditions as buoyant energy dissipates. A new model verification and validation effort was made for the new plume model. The Wallops Island Solid Rocket Propellant (SRP) fire plume was extracted to a 3-D transient dataset. After calibration, the model performs better than previous single puff attempts. Even so, error levels in the process used to estimate location and ambient weather conditions approach 30%. This leads to the conclusion that unplanned photogrammetry evaluations of the IAT model are useful but not sufficiently accurate to quantify model parameters. Like previous attempts, the vertical motion entrainment parameters come out much too high in comparison to values for other studies in the literature. It is suspected that a new model of shear entrainment would alleviate this problem. Unfortunately, IAT already has more calibration parameters than the data comparisons thus far can resolve with statistical certainty. This underscores the need to verify and validate the IAT model using detailed CFD studies that allow ideal statistical comparison with the IAT model for hundreds of cases. Even so, validation by comparison to carefully planned experiments (i.e. with acceptable error levels) is also necessary because the dynamics of entrainment are at a sub-grid level for CFD. Though better validation and verification are most important, many new enhancements are still envisioned for future IAT development. These include particle rain out due to condensation and agglomeration of water, direct connection to the North American Mesoscale (NAM) weather dataset, dynamic weather conditions, including ambient particle entrainment into the puff, and detrainment at the puff to ambient mixing interface. In general, including detailed aerosol dynamics is the greatest coming challenge which will require an entire new sub-model in IAT. This is very important if contaminant particles change in such a way that they increase or decrease in their potential harm to the environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Availability of Critical Benchmark Experiments for the Pebble Tanker Transportation Model for Nuclear Criticality Safety Validation of TRISO Pebbles

This study addresses the need for comprehensive investigations into TRi-structural ISOtropic (TRISO) fuel pebble transportation validation. In this work, an exploratory model, the pebble tanker(PT), was developed with the aim of facilitating the validation of nuclear criticality safety calculations in the context of industrial-scale transportation of TRISO fuel. The PT model was designed to investigate the availability and applicability of critical benchmark experiments crucial for assessing the transportation of these pebbles. This work incorporated sensitivity/uncertainty (S/U) similarity studies to quantify the applicability of critical benchmark experiments and to address nuclear data uncertainties in the context of TRISO transportation. Two container models were investigated: one for the Hermes-type pebble and one for the Pebble Bed Modular Reactor (PBMR)–type pebble. The models were simplified, considering fuel, containment, and either water or air, to enable a focus on the underlying physics of applications involving TRISO fuel pebbles using the PT model. A crucial aspect under consideration was the capacity of the transport package to hold pebbles while ensuring subcriticality in the flooded state. An approach in the criticality validation process involves assessing the similarity between systems through an integral index parameter evaluation. This involves calculating a correlation coefficient (referred to as c k ) based on shared nuclear data–induced uncertainty between a benchmark experiment and the application of the PT model. To facilitate this analysis, the SCALE tools, particularly the CSAS6-Shift, TSUNAMI-3D-Shift, and TSUNAMI-IP sequences, were employed for comprehensive studies in neutronics and S/U analysis. Our findings showed that there are sufficient critical experimental benchmarks to perform this validation of the PT model in the most reactive state, i.e. when the tanker is flooded. This paper provides valuable insights into validating a transport package for Generation IV TRISO fuel pebbles.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Cloud condensation nuclei activity of internally mixed particle populations at a remote marine free troposphere site in the North Atlantic Ocean

Here, this study reports results from research conducted at the Observatory of Mount Pico (OMP), 2225 m above mean sea level on Pico Island in the Azores archipelago in June and July 2017. We investigated the chemical composition, mixing state, and cloud condensation nuclei (CCN) activities of long-range transported free tropospheric (FT) particles. FLEXible PARTicle Lagrangian particle dispersion model (FLEXPART) simulations reveal that most air masses that arrived at the OMP during the sampling period originated in North America and were highly aged (average plume age > 10 days). We probed size-resolved chemical composition, mixing state, and hygroscopicity parameter ($\mathcal{κ}$) of individual particles using computer-controlled scanning electron microscopy with an energy-dispersive X-ray spectrometer (CCSEM-EDX). Based on the estimated individual particle mass from elemental composition, we calculated the mixing state index, $χ$. During our study, FT particle populations were internally mixed ($χ$ of samples are between 53% and 87%), owing to the long atmospheric aging time. We used data from a miniature Cloud Condensation Nucleus Counter (miniCCNC) to derive the hygroscopicity parameter, $\mathcal{κ}$ CCNC . Combining $\mathcal{κ}$ CCNC and FLEXPART, we found that air masses recirculated above the North Atlantic Ocean with lower mean altitude had higher $\mathcal{κ}$ CCNC due to the higher contribution of sea salt particles. We used CCSEM-EDX and phase state measurements to predict single-particle $\mathcal{κ}$ ($\mathcal{κ}$ CCSEM-EDX ) values, which overlap with the lower range of $\mathcal{κ}$ CCNC measured below 0.15 % SS. Therefore, CCSEM-EDX measurements can be useful in predicting the lower bound of $\mathcal{κ}$, which can be used in climate models to predict CCN activities, especially in remote locations where online CCN measurements are unavailable.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Multi-scale evaluation of diesel commuter rail fuel use, emissions, and eco-driving

Diesel commuter rail emissions affect populations near rail corridors. An approach is demonstrated to quantify mesoscale and microscale diesel commuter rail fuel use and emission rates (FUERs) of CO 2 , CO, NO x , particulate matter, and total hydrocarbons based on two U.S. systems. A speed trajectory simulator, an energy model, and an emissions model were calibrated, evaluated, and applied. FUERs and potential reductions from eco-driving were quantified based on simulated trajectories. Hotspots were defined as sections with ≥ 90 th percentile of section-average FUERs by species. A few key variables explain 74–80% of variability in mesoscopic and microscopic FUERs. On average, FUERs are 7–8 times greater for hotspots than non-hotspots. Eco-driving was estimated to reduce segment-average FUERs by 3–33% and eliminate 2–11% hotspots. However, mesoscale oriented eco-driving can, at some locations, increase microscopic FUERs. The approach is adaptable to other diesel commuter rail systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Linking Small-Scale Flight Manoeuvers and Density Profiles to the Vertical Movement of Insects in the Nocturnal Stable Boundary Layer

Huge numbers of insects migrate over considerable distances in the stably-stratified night-time atmosphere with great consequences for ecological processes, biodiversity, ecosystem services and pest management. We used a combination of meteorological radar and lidar instrumentation at a site in Oklahoma, USA, to take a new look at the general assistance migrants receive from both vertical and horizontal airstreams during their long-distance flights. Movement in the nocturnal boundary layer (NBL) presents very different challenges for migrants compared to those prevailing in the daytime convective boundary layer, but we found that Lagrangian stochastic modelling is effective at predicting flight manoeuvers in both cases. A key feature for insect transport in the NBL is the frequent formation of a thin layer of fast-moving air – the low-level jet. Modelling suggests that insects can react rapidly to counteract vertical air movements and this mechanism explains how migrants are retained in the jet for long periods (e.g. overnight, and perhaps for several hours early in the morning). This results in movements over much longer distances than are likely in convective conditions, and is particularly significant for the reintroduction of pests to northern regions where they are seasonally absent due to low winter temperatures.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

2020 State of the Science Report, Chapter 7: Changes in Oceanographic Systems Associated with Marine Renewable Energy Devices

Oceanographic processes define the marine environment: the flow of water determines the concentrations of dissolved gases and nutrients, transports sediments, and maintains the habitats and water quality that support marine organisms and healthy ecosystems. Important physical processes in the ocean include, but are not limited to, tidal circulation and basin flushing, wave action, local and basin-scale ocean currents, temperature and salinity gradients, sediment transport forming and shaping coastlines, and the exchange of heat and dissolved gases at the air-water interface. Harnessing energy with marine renewable energy (MRE) devices has the potential to affect these processes in both the nearfield (within a few device lengths) and the farfield (farther from the device, from the scale of multiple devices to the scale of an enclosed basin) by removing energy from the system, changing natural flow patterns around devices, and/or decreasing wave heights. https://tethys.pnnl.gov/publications/state-of-the-science-2020-chapter-7-oceanographic-systems

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Clean Cities Coalitions 2021 Activity Report

The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy's Vehicle Technologies Office (VTO) works with local Clean Cities coalitions across the country as part of its Technology Integration Program. These efforts help businesses and consumers make smarter and more-informed transportation energy choices that can save energy, lower costs, provide resilience through fuel diversification, and reduce air emissions. This report summarizes the success and impact of coalition activities based on data and information provided in their annual progress reports.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Updated Commercial Aviation Non-Airport Crash Density Values Using Data Obtained from the U.S. National Transportation Safety Board for 2000 through 2019

This report documents the calculation of the commercial aviation (CA) non-airport crash density for Air Route Traffic Control Center (ARTCC) area associated with the Contiguous United States (CONUS) using the methodology outlined in the Department of Energy (DOE) Standard 3014-2006, Accident Analysis for Aircraft Crash Into Hazardous Facilities. For analytical purposes, the CA aircraft fleet is comprised of aircraft engaged in operations under Title 14 of the Code of Federal Regulations (CFR) Part 121 (i.e., Air Carrier) and Part 135 (i.e., Air Taxi).

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Trace explosive residue detection of HMX and RDX in post-detonation dust from an open-air environment

Explosives are often used in industry, geology, mining, and other applications, but it is not always clear what remains after a detonation or the fate and transport of any residual material. The goal of this study was to determine to what extent intact molecules of high explosive (HE) compounds are detectable and quantifiable from post-detonation dust and particulates in a field experiment with varied topography. We focused on HMX (1,3,5,7-Tetranitro-1,3,5,7-tetrazocane), which is less studied in field detonation literature, as the primary explosive material and RDX (1,3,5-Trinitroperhydro-1,3,5-triazine) as the secondary material. The experiment was conducted at Site 300, Lawrence Livermore National Laboratory’s Experimental Test Site, in California, USA. Two 20.4 kg and one 40.8 kg above ground explosions (primarily comprised of LX-14, an HMX-based polymer-bonded high explosive) were detonated on an open-air firing area on separate days. The complex terrain of the firing area (e.g., buildings, berm, low-height obstacles) was advantageous to study HE deposition in relation to plume dynamics. Three types of samples were collected up to 100 m away from each shot: surface swipes of aluminum plates, surface swipes of fixed objects, and filters from air samples. We used atmospheric flow tube-mass spectrometry (AFT-MS) to quantify picogram levels of molecular residue of HE material in the post-detonation dust. An aliquot of sample extract in methanol (e.g., 1 µL of 0.5 mL) was placed onto a resistive material and then thermally desorbed into the AFT-MS. We successfully detected and quantified both HMX and RDX in many of the samples. Based on mass (pg) detected and solution dilution, we back-calculated the mass collected on the swipe or filter (ng per sample). The aerial distribution of molecular residue was consistent with the path of the plume, which was strongly determined by wind speed and direction at the time of each shot. The quantity of material detected appeared to correlate more with distance from the shot and the wind conditions than with shot size. This study demonstrates that the picogram detection levels of AFT-MS are well-suited for quantification of analytes (e.g., HMX and RDX) in environmental samples.

atmospheric flow tube-mass spectrometry (AFT-MS), ↗
DOE OSTI2024

Developing Platinum-Group-Metal-Free Catalysts for Oxygen Reduction Reaction in Acid: Beyond the Single Metal Site

This project is to develop M (x) -N-C catalysts with dense multiple metal center (MMC) sites to meet the DOE 2025 activity target of 0.044 mA/cm 2 at 0.9 V IR-free ., as well as other goals such as durability. We have made important contributions to both catalyst development and fundamental understandings of the active sites in M-N-C catalysts in this project. We successfully made M (x) -N-C catalysts with some multiple metal center (MMC) sites by combining ionothermal carbonization with chemical vapor deposition (CVD). These catalysts, however, are not as active as the most active single-atom Fe-N-C catalysts made by the similar CVD process, owing likely to the low site density and the presence of inorganic Fe species such as iron carbides and nanoparticles. The most significant accomplishments we achieved in this project are: (1) we unraveled the formation pathway of Fe-N 4 sites during pyrolysis step-by-step and identified the trans-metalation mechanism, in collaboration with Deborah Myers and her colleagues at Argonne National Laboratory (ANL); (2) inspired by this finding, we pioneered the CVD synthesis of M-N-C catalysts (M = Mn, Fe, and Co), in which the Fe-N-C catalyst by CVD demonstrated an ORR activity of 33 mA/cm 2 at 0.9 V in H 2 -O 2 proton exchange membrane fuel cells (PEMFCs), very close to the ultimate goal of 35 mA/cm 2 of our project. This catalyst is the first Fe-N-C catalyst that contains only D1 sites without the D2 sites; whereas D1 and D2 sites have been always identified by Mossbauer in previous Fe-N-C catalysts. This finding helps to understand what the D1 and D2 sites are and their roles in catalyzing the ORR. (3) by improving the mass transport of the carbon matrix prior to the CVD process, the revised Fe-N-C catalyst made by CVD delivered a maximum power density of 0.53 W/cm 2 in H 2 -air PEMFCs. The improvement strategy was partly inspired by the computational modeling work by Adam Weber from LBNL, the Co-PI of this project, by developing, coding, and exercising a continuum level model of transport phenomena within a PGM-free catalyst layer. The model demonstrated that local resistances combined with limited site density of the PGM-free catalyst can result in limiting currents and poor polarization performance. The model also gave design guidance for impact of ECSA and overall catalyst-layer thickness. However, both Fe-N-C and Co-N-C catalysts developed by CVD showed poor durability in PEMFCS, in comparison with the traditional M-N-C catalysts synthesized via regular pyrolysis process. Consequently, we did not achieve the proposed durability targets. Despite so, we believe the FeNC-CVD catalysts with the poor durability and D1 sites only provides an excellent platform to understand the degradation mechanism of Fe-N-C in PEMFCs, the most important challenge in the development of M-N-C catalysts.

08 HYDROGEN↗
DOE OSTI2020

Hydrogen Transport in a Model 9979 Shipping Package with Inner Convenience Cans

Radiolytic hydrogen production and accumulation inside containment packages is a concern at any facility responsible for their packaging, storage, transportation, and/or disposal. When hydrogen gas accumulates to concentrations above the Lower Flammability Limit (LFL) which is 4% or 40,000 ppm in air, the possibility of a deflagration or explosion increases. This concern persists over the course of the package lifetime which is unlimited when disposed of by burial or in permanent repositories. Here, we report on a numerical model used to predict the concentration of hydrogen within each layer of a Model 9979 package containing a convenience can assembly. Simulations show the hydrogen concentration to always be highest in the inner convenience can containing the radioactive source. When the radioactive source is within the Los Alamos National Laboratory (LANL) Packaging Limits, the hydrogen concentration is shown to remain well below the LFL at all times including packaging, storage, transportation, and disposal. A hydrogen transport model is presented for a Model 9979 package system containing a nested arrangement of convenience cans, which are tin oxide coated steel cans of various sizes with a slip-lid assembly. The inner convenience can contains the radioactive source material along with an unknown quantity of incidental water acquired from humid air or processing. While visible organic materials such as paper and plastics were purposely excluded from the inner can, it is not possible to claim the wastes are entirely organic free. The inner convenience can is tape sealed and placed into a plastic bag which is horsetail closed (i.e., twisted and taped). The bagged can is placed into an outer convenience can that is also tape sealed. The can assembly is then placed into the 30 gallon drum and subsequently placed inside the 55 gallon drum in the 9979 package. Here we assume hydrogen gas is produced in the inner convenience can from alpha radiolysis of water at a rate dependent on the quantity of uranium isotopes and water present. The hydrogen transport model was used to calculate hydrogen accumulations within the package’s five layers at different times and conditions. These simulations serve two purposes; (i) to build confidence in the model by comparing predicted values to measured values, and (ii) to check the steady state hydrogen concentrations that are approached at long times in the package’s lifetime. Model simulations were compared to gas samples taken from the 30 gallon drum after storage at LANL’s Chemistry and Metallurgy Research (CMR) building for around 500 days. Hydrogen concentration calculations over much longer periods (i.e., more than 270 years) included extreme storage durations, transportation at extreme cold temperatures, and disposal of packages assuming different average temperatures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Evaporation from thin porous Coatings: Pore size effects and predictive equation for homogeneous coatings

Evaporation of small water droplets on solids is hindered because surface tension pulls the droplet into a spherical cap that has a small perimeter. Our solution is to coat a solid with a very thin, porous layer into which the droplet flows to create a large-area disk with concomitant high rate of evaporation. We investigate evaporation by varying factors that have not been previously considered: pore size and distribution, contact angle, temperature, and relative humidity (RH). A larger pore size resulted in faster evaporation, which we explain through faster transport within the coating. Even faster evaporation occurred for a bilayer structure with small particles on the air side and larger particles on the solid side. Further, the water advancing contact angle had an insignificant effect in the range from < 10° through to 60°. Our results for different pore sizes, temperature, humidity, and contact angle all collapse onto a single curve when appropriately normalized. This validates an equation that can be used for the evaporation from a homogeneous coating that depends only one empirical factor and the droplet volume. Since the volume is often user-controlled, we envisage that this equation can be used to predict evaporation and guide design of fast-drying coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Biofuel Options for Marine Applications: Technoeconomic and Life-Cycle Analyses

This study performed technoeconomic and life-cycle analyses to assess the economic feasibility and emission benefits and tradeoffs of various biofuel production pathways as an alternative to conventional marine fuels. We analyzed production pathways for (1) Fischer-Tropsch diesel from biomass and cofeeding biomass with natural gas or coal, (2) renewable diesel via hydroprocessed esters and fatty acids from yellow grease and cofeeding yellow grease with heavy oil, and (3) bio-oil via fast pyrolysis of low-ash woody feedstock. We also developed a new version of the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) marine fuel module for the estimation of life-cycle greenhouse gas (GHG) and criteria air pollutant (CAP) emissions of conventional and biobased marine fuels. The alternative fuels considered have a minimum fuel selling price between 2.36 and 4.58 $/heavy fuel oil gallon equivalent (HFOGE), and all exhibit improved life-cycle GHG emissions compared to heavy fuel oil (HFO), with reductions ranging from 40 to 93%. The alternative fuels also exhibit reductions in sulfur oxides and particulate matter emissions. Additionally, when compared with marine gas oil and liquified natural gas, they perform favorably across most emission categories except for cases where carbon and sulfur emissions are increased by the cofed fossil feedstocks. The pyrolysis bio-oil offers the most promising marginal CO2 abatement cost at less than $100/tonne CO2e for HFO prices >$1.09/HFOGE followed by Fischer-Tropsch diesel from biomass and natural gas pathways, which fall below $100/tonne CO2e for HFO prices >$2.25/HFOGE. Pathways that cofeed fossil feedstocks with biomass do not perform as well for marginal CO2 abatement cost, particularly at low HFO prices. This study indicates that biofuels could be a cost-effective means of reducing GHG, sulfur oxide, and particulate matter emissions from the maritime shipping industry and that cofeeding biomass with natural gas could be a practical approach to smooth a transition to biofuels by reducing alternative fuel costs while still lowering GHG emissions, although marginal CO2 abatement costs are less favorable for the fossil cofeed pathways.

Greenhouse gas, life cycle assessment, techno-econ↗
DOE OSTI2021

DireWolf

DireWolf is an integrated micro-reactor capability being developed using an advanced multiphysics modeling and simulation capability for heat pipe-cooled micro-reactor concepts. The DireWolf application is built on INL’s Multiphysics Object-Oriented Simulation Environment (MOOSE) development and runtime framework and is composed of the following MOOSE- based applications as submodules, coupled together using the MOOSE MultiApps and Transfers capability and executed as a single application: Griffin (reactor physics and radiation transport), BISON (nuclear fuel performance), Grizzly (structural mechanics), Sockeye (heat pipe technology), and RELAP-7 (open-air and super-critical CO2 Brayton cycle).

Permann, Cody↗
DOE OSTI2020

Impacts of Ice-Shelf Melting on Water-Mass Transformation in the Southern Ocean from E3SM Simulations

Abstract The Southern Ocean overturning circulation is driven by winds, heat fluxes, and freshwater sources. Among these sources of freshwater, Antarctic sea ice formation and melting play the dominant role. Even though ice-shelf melt is relatively small in magnitude, it is located close to regions of convection, where it may influence dense water formation. Here, we explore the impacts of ice-shelf melting on Southern Ocean water-mass transformation (WMT) using simulations from the Energy Exascale Earth System Model (E3SM) both with and without the explicit representation of melt fluxes from beneath Antarctic ice shelves. We find that ice-shelf melting enhances transformation of Upper Circumpolar Deep Water, converting it to lower density values. While the overall differences in Southern Ocean WMT between the two simulations are moderate, freshwater fluxes produced by ice-shelf melting have a further, indirect impact on the Southern Ocean overturning circulation through their interaction with sea ice formation and melting, which also cause considerable upwelling. We further find that surface freshening and cooling by ice-shelf melting cause increased Antarctic sea ice production and stronger density stratification near the Antarctic coast. In addition, ice-shelf melting causes decreasing air temperature, which may be directly related to sea ice expansion. The increased stratification reduces vertical heat transport from the deeper ocean. Although the addition of ice-shelf melting processes leads to no significant changes in Southern Ocean WMT, the simulations and analysis conducted here point to a relationship between increased Antarctic ice-shelf melting and the increased role of sea ice in Southern Ocean overturning.

Jeong, Hyein↗
DOE OSTI2023

Experimental Characterization of Hydrocarbons and Nitrogen Oxides Production in a Heavy-Duty Diesel–Natural Gas Reactivity-Controlled Compression Ignition Engine

Reactivity-Controlled Compression Ignition (RCCI) combustion is considered one of the most promising Low-Temperature Combustion (LTC) concepts aimed at reducing greenhouse gases for the transportation and power generation sectors. Due to the spontaneous combustion of a lean, nearly homogeneous mixture of air and low-reactivity fuel (LRF), ignited through the direct injection of a small quantity of high-reactivity fuel (HRF), RCCI (dual-fuel) shows higher efficiency and lower pollutants compared to conventional diesel combustion (CDC) if run at very advanced injection timing. Even though a HRF is used, the use of advanced injection timing leads to high ignition delays, compared to CDC, and generates high cycle-to-cycle variability, limited operating range, and high pressure rise rates at high loads. This work presents an experimental analysis performed on a heavy-duty single-cylinder compression ignited engine in dual-fuel diesel–natural gas mode. The objective of the present work is to investigate and highlight the correlations between combustion behavior and pollutant emissions, especially unburned hydrocarbons (HC) and oxides of nitrogen (NOx). Based on the analysis of crank-resolved pollutants measurements performed through fast FID and fast NOx systems under different engine operating conditions, two correlations were found demonstrating a good accordance between pollutant production and combustion behavior: Net Cyclic Hydrocarbon emission—cyclic IMEP variations (R 2 = 0.86), and Cyclic NOx—maximum value of the Rate of Heat Released (R 2 = 0.82).

33 ADVANCED PROPULSION SYSTEMS↗