Search NASA⌕ Search

SEARCH · Search NASA

Results for “BONDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2026

Beyond Melting: Amorphous Bonding for Joining and Consolidation

Crystallization may be the hidden constraint in thermoplastic composite manufacturing. It requires tightly controlled cooling, induces residual stresses through shrinkage, and introduces path-dependent behavior that complicates predictive modeling yet remains essential for structural performance. This work asks: can bonding be achieved without relying on melt-driven crystallization? To address this, thin (5–20 μm) polyetherimide (PEI) interlayers are pre-healed to slow-cooled polyaryletherketone (PAEK) in two contexts. The first, Thermabond®, is sub-melt joining of low melt-PAEK laminates. Results show that bond quality is governed primarily by processing (i.e., adequate healing and film handling) rather than modest changes in interlayer thickness. This concept is then extended to laminate-scale manufacturing through an architecture known as OATMEAL (Out-of-autoclave Amorphous/semicrystalline Thermoplastic Material for Energy-efficient Aerospace-grade Laminates). PEI is healed to carbon fiber reinforced polyetheretherketone (PEEK) at the prepreg and excess PEI is then ablated from the surface. Crystallinity is developed off-line during prepreg fabrication, while subsequent consolidation occurs below the melt temperature to preserve it. Cross-ply warpage experiments show that, contrary to intuition, repeated amorphous interfaces reduce global curvature by lowering the effective stress lock-in temperature and eliminating crystallization shrinkage from the lamina response. Correspondingly, laminate behavior is accurately predicted using classical laminate theory (CLT) with a single effective stress-free temperature, whereas conventional CF/PEEK requires accounting for crystallization-driven effects. By decoupling interfacial healing from crystallization, OATMEAL enables sub-melt consolidation, reduces energy consumption by up to 75%, and increases manufacturing throughput by fivefold. These results demonstrate that amorphous bonding is not only a joining strategy, but a pathway to more predictable and scalable thermoplastic composite manufacturing.

solidification↗
DOE OSTI2025

Ligand‐Directed Actinide Oxo‐Bond Manipulation in Actinyl Thiacalix[4]arene Complexes

Abstract Understanding the chemistry of the inert actinide oxo bond in actinyl ions AnO 2 2+ is important for controlling actinide behavior in the environment, during separations, and in nuclear waste (An=U, Np, Pu). The thioether calixarene TC4A (4‐ tert ‐butyltetrathiacalix[4]arene) binds equatorially to the actinyl cation forming a conical pocket that differentiates the two trans‐ oxo groups. The ‘ate’ complexes, [A] 2 [UO 2 (TC4A)] (A=[Li(DME) 2 ], HNEt 3 ) and [HNEt 3 ] 2 [AnO 2 (TC4A)] (An=U, Np, Pu), enable selective oxo chemistry. Silylation of the U VI oxo groups by bis(trimethylsilyl)pyrazine occurs first at only the unencapsulated exo oxo and only one silylation is needed to enable migration of the endo oxo out of the cone, whereupon a second silylation affords the stable U IV cis‐ bis(siloxide) [A] 2 [U(OSiMe 3 ) 2 (TC4A)]. Calculations confirm that only one silylation event is needed to initiate oxo rearrangement, and that the putative cis dioxo isomer of [UO 2 (TC4A)] 2− would be stable if it could be accessed synthetically, at only 23 kcal.mol −1 in energy above the classical trans dioxo. Calculations for the transuranic cis [AnO 2 (TC4A)] 2− (An=Np, Pu) are at higher energies, 30–35 kcal.mol −1 , retaining the U complexes as the more obvious target for a cis ‐dioxo actinyl ion. The aryloxide (OAr) groups of the macrocycle are essential in stabilizing this as‐yet unseen uranyl geometry as further bonding in the TC4A U‐O Ar groups stabilizes the U=O ‘yl’ bonds, explaining the stability of the putative cis [UO 2 (TC4A)] 2− in this ligand framework.

Pyrch, Mikaela M. [College of Chemistry University↗
DOE OSTI2025

Late-Stage Oxidation of C( sp 3 )─H Bonds with High Efficiency and Alkyl Group Dihydroxylation of Complex Molecules

Here, the late-stage oxidation of C(sp 3 )─H bonds is highly valuable for modulating the solubility and binding of bioactive compounds and for diversification of complex molecules. Undirected methods for C(sp 3 )─H oxidation are valuable for the installation of hydroxyl groups at sites remote from other functional groups present in the molecule, but existing catalysts are limited by low turnover numbers and lengthy ligand syntheses. Perfluorinated ruthenium porphyrins are highly active catalysts for the oxidation of alkyl C─H bonds, but the scope of the transformation with complex molecules under conditions of limiting substrate has not been investigated. We report that carbonylruthenium(II) tetrakis(pentafluorophenyl)porphyrin [Ru(TPFPP)(CO)] catalyzes the selective oxidation of tertiary C(sp 3 )─H bonds in a broad range of complex natural products and drugs, with turnover numbers as high as 1000, and the tolerance of the reaction to various functional groups was rapidly assessed by performing a model reaction in the presence of additives. We show how the combination of this undirected C(sp 3 )─H oxidation and a directed C(sp 3 )─H silylation and oxidation provides rapid access to highly oxidized, 1,2-diol derivatives of natural products by a formal dihydroxylation of an alkyl group.

Alcohols↗
DOE OSTI2025

Ligand‐Directed Actinide Oxo‐Bond Manipulation in Actinyl Thiacalix[4]arene Complexes

Understanding the chemistry of the inert actinide oxo bond in actinyl ions AnO2 2+ is important for controlling actinide behavior in the environment, during separations, and in nuclear waste (An=U, Np, Pu). The thioether calixarene TC4A (4-tert-butyltetrathiacalix[4]arene) binds equatorially to the actinyl cation forming a conical pocket that differentiates the two trans-oxo groups. The 'ate' complexes, [A]2[UO2(TC4A)] (A=[Li(DME)2], HNEt3) and [HNEt3]2[AnO2(TC4A)] (An=U, Np, Pu), enable selective oxo chemistry. Silylation of the UVI oxo groups by bis(trimethylsilyl)pyrazine occurs first at only the unencapsulated exo oxo and only one silylation is needed to enable migration of the endo oxo out of the cone, whereupon a second silylation affords the stable UIV cis-bis(siloxide) [A]2[U(OSiMe3)2(TC4A)]. Calculations confirm that only one silylation event is needed to initiate oxo rearrangement, and that the putative cis dioxo isomer of [UO2(TC4A)]2- would be stable if it could be accessed synthetically, at only 23 kcal.mol-1 in energy above the classical trans dioxo. Calculations for the transuranic cis[AnO2(TC4A)]2- (An=Np, Pu) are at higher energies, 30-35 kcal.mol-1, retaining the U complexes as the more obvious target for a cis-dioxo actinyl ion. The aryloxide (OAr) groups of the macrocycle are essential in stabilizing this as-yet unseen uranyl geometry as further bonding in the TC4A U-OAr groups stabilizes the U=O 'yl' bonds, explaining the stability of the putative cis[UO2(TC4A)]2- in this ligand framework.

Pyrch, Mikaela M↗
DOE OSTI2024

Disentangling Acid‐Base Chemistry through Blue Shifting Hydrogen Bond Contributions

The blue shifting of vibrational frequencies in hydrogen bonded molecules, as observed in aqueous environments, has been attributed to local partial charge transfer from solvation. Here, in this study, we extrapolate the blue shift model to the stronger ionic interactions between hydrogen bond acceptors associated with protonation through augmented pH levels and competitive interactions with counter ion pairing. The chemical model we utilize in this work is the aqueous pyridine‐pyridinium equilibrium to characterize the blue shifts observed in the pyridinium chloride ionic system. The observed agreement between observed experimental and calculated spectral shifts shows that the blue shifting model can be extrapolated to stronger interactions and accurately describe the nature of the hydrogen bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nitrogen‐Nitrogen Bond Breaking in Irradiation Products of Hexanitrohexaazaisowurtzitane (CL‐20)

While the primary result of an interaction of ionizing radiation with an organic material is the ejection of electrons from molecular orbitals producing cations, the free electrons can further interact, yielding excited states; and, potentially, anions. In this work, we computed reaction barriers and energies for N−N bond breaking in the CL-20 cation, anion, and excited state to investigate if CL-20 degradation is accelerated after radiation exposure. We focused on N−N bond dissociation because it is the rate-determining step in the thermal degradation of CL-20. We found that N−N cleavage rapidly takes place in the CL-20 cation and anion with greatly reduced reaction energies as compared to CL-20. We also outlined a potential path for photodissociation of the N−N bond. While CL-20 is kinetically stable, initial degradation occurs readily in its irradiation products. In conclusion, this is of importance for the performance of the explosive after high-dose exposure and influences aging if CL-20 is irradiated at a low dose over extended periods of time.

CL-20 anion↗
DOE OSTI2026

Formation of carbon homonuclear bonds in β-SiC under neutron irradiation at various temperatures and neutron doses

To elucidate radiation defect processes in SiC, Raman spectroscopy was systematically applied to high-purity, polycrystalline β-SiC that was neutron irradiated at a range of temperature and dose conditions. The analysis specifically focused on formation of carbon homonuclear bonds by irradiation; these bonds were indicated by D and G bands and amorphous carbon peaks. Intensity of the carbon peaks relative to SiC peaks significantly decreased in the case of high temperature and/or high neutron dose of 500 °C to 29 displacements per atom (dpa) and about 800 °C to 1.38 and 29 dpa. The absence of carbon bond peaks under those conditions was explained by growth of stoichiometric defect clusters, consistent with previous atomistic simulations on SiC defect stability. The lack of Raman bands associated with carbon clusters under high-temperature and high-dose radiation conditions accounts for the resistance of SiC to phase separation under irradiation. The findings further suggest that material compositions and chemical properties that are inherently resistant to chemical disordering under high-dose radiation conditions are indicative of the long-term durability of ceramic compounds in radiation environments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis and structural characterization of 2,2’-bipyridine zinc formate: Analysis of formate bonding and hydrosilylation of CO 2 and carbonyl compounds

The zinc formate compound (bipy)Zn(O 2 CH) 2 is obtained via the reaction of Zn(O 2 CH) 2 with 2,2’-bipyridine (bipy). In addition, (bipy)Zn(O 2 CH) 2 may be formed from zinc hydride via addition of bipy followed by addition of (i) HCO 2 H and (ii) CO 2 . The molecular structure of (bipy)Zn(O 2 CH) 2 has been determined by X-ray diffraction, thereby demonstrating that it exists as a monomeric species with a distorted tetrahedral zinc center and monodentate formate ligands. Analysis of the bonding within the formate ligand indicates that the zinc–formate moiety is not best represented by a Zn–O–C(=O)H resonance structure, but instead possesses a significant ionic component that reduces the C=O bond order and increases the C–O bond order. The formate compound (bipy)Zn(O 2 CH) 2 participates in hydrosilylation transformations involving CO 2 and carbonyl compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cs X Si 15 P 21 ( X = Sn or Pb): Polar Noncentrosymmetric Si–P Frameworks Stabilized by Covalent X –P Bonding

Metal silicon phosphides composed of earth-abundant Si and P tend to exhibit semiconducting properties and adopt diverse crystal structures with relatively small additions of structure-directing elements. The potential of silicon phosphide materials in nonlinear optical applications has been hindered by the inability to systematically produce noncentrosymmetric structures with such a flexible framework. Here, in this work, two isostructural compounds with a novel noncentrosymmetric structure were made possible by the inclusion of elements with stereochemically active lone pairs (Sn 2+ and Pb 2+ ). The structures were determined through single-crystal and synchrotron powder X-ray diffraction. Analysis of chemical bonding in real space through the electron localization function revealed stereochemically active Pb 2+ and Sn 2+ species in a trigonal pyramidal coordination with {Pb/Sn}–P bonds. Such covalent bonding between Pb and P is quite uncommon in extended solids and has been reported in a few rare instances. Band structure calculations and linear optical measurements confirm the semiconducting nature of Cs X Si 15 P 21 ( X = Sn or Pb). The synthesis was optimized to yield high-purity polycrystalline samples. The nonlinear optical properties show promising second-harmonic generation (SHG) coefficients from the Kurtz–Perry method. First-principles calculations of the nonlinear optical properties support the experimentally determined SHG values and provide moderate values of birefringence, suggesting Cs X Si 15 P 21 could be phase-matchable and practical nonlinear optical materials in the mid-IR region.

crystal structure↗
DOE OSTI2024

Impacts of Hydrogen Bond Donor Structures in Phenolic Aldehyde Deep Eutectic Solvents on Pretreatment Efficiency

As a green solvent for biomass processing, deep eutectic solvents (DESs) have shown effectiveness in biomass processing. Here, in this study, phenolic aldehydes with different numbers of methoxy groups, including 4-hydroxybenzaldehyde (HBA, no methoxy), vanillin (VA, monomethoxy), and syringaldehyde (SA, dimethoxy) were employed to synthesize DESs with choline chloride (ChCl). The presence of methoxy groups in the hydrogen bond donor structure affected DES properties, as well as biomass pretreatment performance. The high thermal stability of phenolic aldehyde DESs was shown with over 225 °C onset temperature. The hydrogen bond donor with one aldehyde and one hydroxyl group at the para position without a methoxy group (ChCl-HBA) showed the highest xylan removal and delignification, reaching 59.3 and 88.0%, respectively, leading to the highest enzymatic hydrolysis yield. Sonication after pretreatment further enhanced the hydrolysis yields, achieving 83.3% glucan conversion and 50.1% xylan conversion. In the lignin-rich fraction, the recovered lignin showed a low weight–average molecular weight under 2100 g/mol with a relatively uniform molecular weight dispersity below 1.5. This study provides insights into how the chemical structure of hydrogen bond donors in DESs affects biomass processing and paves the way for designing effective lignin-derived DES in future biorefinery processes.

09 BIOMASS FUELS↗
DOE OSTI2025

Probing the Redox Reactivity of Alkyl Bound Astatine: A Study on the Formation and Cleavage of a Stable At–C Bond

The formation of a stable alkyl At–C bond occurs during the shipment of 211 At on a 3-octanone-impregnated column and the reactivity of 211 At stripped from columns has been studied. The 211 At could not be recovered from the 3-octanone organic phase using nitric acid or sodium hydroxide, even up to 10 and 15.7 M, respectively. Several reducing and oxidizing agents, including hydrazine, hydroxylamine, ascorbic acid, ceric ammonium nitrate, potassium permanganate, sodium hypochlorite, and calcium hypochlorite were used to promote the recovery of 211 At. The most effective reducing agent was hydroxylamine, where ~70% of the 211 At was recovered, while among oxidizing agents ceric ammonium nitrate, potassium permanganate, and sodium hypochlorite all showed near quantitative recovery of 211 At. These results indicate an At–C bond is being formed during the shipment of the column and a redox reaction is required for bond cleavage to occur. Furthermore, DFT calculations have been used to propose several products of an AtO + -3-octanone reaction, with 4-astato-5-hydroxy-octa-3-one being the most probable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

CoSn-type NiIn1–xSbx (0 ≤ x ≤ 0.17): Site-Selective Substitution, Electronic Structure, Chemical Bonding, and Structural Transformation

CoSn-type intermetallic compounds have emerged as a model platform for Kagome-derived flat-band physics, where subtle chemical perturbations can strongly influence electronic structure and phase stability. Here, we present a combined experimental and theoretical study of Sb-substitution in CoSn-type NiIn1–xSbx (0 ≤ x ≤ 0.17) to elucidate the interplay between site selectivity, solubility limit, chemical bonding, and electronic structure. Rietveld refinements on Neutron powder diffraction data confirmed the selective Sb-substitution at the electron-rich In2 (2d) site forming the honeycomb substructure, while the In1 (1a) site within the Kagome layer remains exclusively occupied by In. Density functional theory (DFT) calculations revealed that pristine CoSn-type NiIn hosts Ni 3d-dominated flat bands near the Fermi level (EF), originating from the Kagome-like Ni substructure. Partial replacement of In by Sb within the honeycomb layer alters these flat-band features below EF, reducing the density of states and suppressing the flat-band topology near the Fermi level. Orbital-resolved electronic structure and chemical-bonding analyses show that Sb-substitution enhances Ni-p-block (In/Sb) covalency and optimizes charge compensation, stabilizing the CoSn-type structure up to the solubility limit x ≈ 0.17. Beyond the limit, the higher-Sb compositions show satellite reflections consistent with an incommensurately modulated phase. These results establish a link between site-selective chemical substitution, bonding optimization, and flat-band electronic structure evolution, providing fundamental insights into how chemical substitution influences the electronic properties of Kagome-based intermetallic compounds.

Roy, Nilanjan [National Institute of Technology Si↗
DOE OSTI2026

Ensemble Effects on Hydroxide Bond Dissociation Free Energies in Polyoxovanadate Clusters

Understanding structure-property relationships is foundational to numerous modern chemistries, such as proton-coupled electron transfer (PCET). However, an experimentally measured property is the result of the behavior from an ensemble of molecules. Neglecting ensemble effects, especially under complex chemical environments, may obfuscate these relationships and lead to discrepancies between theory and experiment. In this work, we demonstrate the impact of configurational entropy and local chemical environments on hydroxide bond dissociation free energies [BDFE- (O−H)] for a set of polyoxovanadate nanoclusters, at ambient conditions. The O−H bond strengths are investigated via density functional theory (DFT) coupled with statistical thermodynamic analysis and bilinear modeling, and compared with previous experimental results on the same systems, namely electrochemical solutions of: [V 6 O 13−x (OH) x (TRIOL R ) 2 ] −2 (x = 2, 4, 6; R = NO 2 , Me) and [V 6 O 11−x (OMe) 2 (OH) x (TRIOL NO 2 ) 2 ] −2 (x = 2, 4). Interestingly, we find that ensemble effects, even at room temperature, can account for a significant portion of the BDFE(O−H) trend with the degree of reduction via H atom binding, which cannot be fully captured by single-structure, static DFT calculations. Moreover, we find that the ensemble effects may be replicated statistically, requiring only enumeration of energetically accessible H-binding sites. With the ensemble effects resolved, we present a simple bilinear model to reconcile remaining biases between experiment and ensemble-informed theory, which corelate with clusterspecific electronic environment differences. The bilinear model achieves outstanding accuracy vs experiments with a root-mean squared error of 0.4 kcal/mol. Finally, based on the physicochemical characteristics of hydrogen interaction with polyoxometalates, we present a simple methodology that captures the BDFE(O−H) trend while dramatically reducing required DFT calculations by 98% and achieving accuracy within 1 kcal/mol. Overall, this work elucidates the roles and structural origins of configurational entropy and chemical effects on polyoxometalate hydroxide bond energies, with potential applicability to various atomically precise metal oxide systems. Importantly, it introduces models for rapid and highly accurate property calculations in connection with experiments.

Cluster chemistry↗
DOE OSTI2024

Structure, Bonding, and Vibrational Dynamics of a Triamine High Energy Density Material under Pressure

High energy density materials have complex intermolecular interactions which influence their stability and performance. We used a combination of synchrotron X-ray diffraction, synchrotron infrared spectroscopy, and Raman vibrational spectroscopy, supplemented by density functional theory calculations, to probe pressure-induced changes in structure and intermolecular interactions of 1H,4'H-[3,3'-bis(1,2,4-triazole)]-4',5,5'-triamine as a model high energy density material up to 40 GPa. We find that compression of the triamine is accompanied by increased intermolecular interactions that give rise to an interesting evolution of the structure and bonding with pressure. Analysis of the equation of state determined from the X-ray diffraction indicates a change in compression mechanism near 19 GPa consistent with changes in vibrational spectra that provide evidence for a structural rearrangement associated with changes in hydrogen bonding near that pressure. As a result, the overall compressional behavior calculated theoretically agrees with that observed experimentally though differences are found that indicate the need for improved treatment of the intermolecular interactions including hydrogen bonding under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Surface Chemistry of Methanol on TiO 2 (110): Effects of Pressure and Temperature on the Stability of C–O and C–H Bonds

Synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the surface chemistry of methanol on TiO 2 (110), examining the effects of methanol pressure, oxide temperature, and coadsorption with H 2 . At 300 K, the adsorption of methanol on TiO 2 (110) leads to the formation of CH 3 O on the surface with a minor amount of CH 3 OH present. The easy cleavage of the O–H bond in the alcohol agrees with the predictions of theoretical calculations, and most of the adsorbed CH 3 O was not associated with the presence of Ti 3+ sites in the oxide substrate. The adsorbed CH 3 O was removed from the TiO 2 (110) surface by heating to 600 K without the deposition of CH x fragments or C on the oxide. The results of temperature-programmed desorption (TPD) showed the evolution of methanol and formaldehyde at 360 and 490 K as a result of a disproportionation reaction: 2CH 3 O → CH 3 OH + CH 2 O. This surface chemistry, where there is no rupture of the C–O bond, and only selective cleavage of O–H and C–H bonds, is very different from that found on metals used in catalysts for methanol reforming, where massive conversion of the alcohol into CO, CH x and C species is seen. Furthermore, the TPD data indicate that any CH 3 O formed on the oxide surface can be hydrogenated and desorbed as CH 3 OH at temperatures below 550 K. In this respect, titania is an ideal support for catalysts employed to achieve methanol synthesis through CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Insights into Nonelectroactive C–C Bond Formation on Cu(100) during Electrochemical CO 2 Reduction from Multiconfigurational Wavefunction Theory

Carbon–carbon (C–C) bond formation is necessary for hydrocarbon (and oxygenate) synthesis beyond methane (and formate/formic acid) during electrochemical CO and CO 2 reduction (ECOR and ECO 2 R). Cu has notable ability to form hydrocarbons compared to other pure metals. In particular, the (100) facet of face-centered cubic Cu forms ethylene competitively with H 2 and methane during both ECOR and ECO 2 R. Past simulations based on density functional theory (DFT) with standard exchange-correlation functional approximations predict fast nonelectroactive C–C bond formation channels involving adsorbed (*) CO together with another *CO, formyl (*CHO), or hydroxymethylidyne (*COH), forming OC*–*CO, OC*–CHO*, and OC*–*COH, respectively. Such simulations support the prevailing hypothesis that emergence of C 2 products is kinetically determined at the early stages of the reduction chemistry. Here we show, via simulations with more accurate many-body, i.e., “correlated”, wavefunction theory (enabled by an embedding scheme), that the coupling of *CO with a *CO or a *COH (previously predicted at the same level of theory to kinetically dominate over *CHO as the one-electron reduction product of *CO) is highly activated (kinetically impeded), with free energy barriers >1 eV, in contradiction to previous DFT-based simulations. Intriguingly, we find that the coupling of two adjacent *COHs incurs only a small barrier (<0.3 eV) and is exoergic (< –1 eV); however, given the predicted low surface mobility of *COH, the emergence of HOC*–*COH is also improbable, at least at low *COH coverages. We therefore conclude that it is highly unlikely for *CO to participate in nonelectroactive C–C bond formation on pristine Cu(100), contrary to conventional wisdom, and that the energetically favorable *COH dimerization may occur only after substantial buildup of *COH on the surface.

adsorption↗
DOE OSTI2025

Cation-π Bonding in Actinides: UO x + (Benzene) ( x = 0, 1, 2) Complexes Studied with Threshold Photodissociation Spectroscopy and Theory

Cation-π complexes of the form UO x + (benzene) (x = 0, 1, 2) are produced by laser vaporization and cooled in a supersonic molecular beam. These ions are mass selected and studied with UV–visible laser photodissociation spectroscopy. Each of these complexes photodissociates by elimination of the benzene ligand. Above an energetic threshold, the absorption and photodissociation are continuous, indicating a high density of strongly coupled electronic states. The thresholds for the dissociation of each of these three complexes are measured and assigned as their respective bond dissociation energies. The bond energies determined [U + –(benzene): 42.5 ± 0.3 kcal/mol; UO + –(benzene): 41.0 ± 0.3 kcal/mol; UO 2 + –(benzene): 39.7 ± 0.3 kcal/mol] are comparable to those of transition metal ion-benzene complexes. Computational studies at the DFT/B3LYP level complement the experiments, predicting dissociation energies in reasonably good agreement with the experiments. Experiments and theory agree that the U+(benzene) complex is more strongly bound than its corresponding oxide ions. This new thermochemistry on actinide cation-π bonding should stimulate higher-level computational studies on these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Capturing Ring Opening in Photoexcited Enolic Acetylacetone upon Hydrogen Bond Dissociation by Ultrafast Electron Diffraction

Photoinduced biological and chemical reactions are often based on key structural transformations of a molecule driven across multiple electronic states. Acetylacetone (AcAc) is a prototypical system for complex chemical pathways involving several conical intersections (CI) and singlet–triplet intersystem crossings (ISC) characterized by distinct geometries. In the gas phase, AcAc is predominantly in a planar ring-like enolic form stabilized by a strong intramolecular O–H···O hydrogen bond. Following excitation into the S 2 (ππ*) state at 266 nm, acetylacetone undergoes rapid internal conversion followed by intersystem crossing. Such relaxation pathways are associated with structural changes including ring opening, deplanarization, and bond elongation. In this work, ultrafast electron diffraction (UED) at the SLAC MeV-UED setup is employed as a direct structural probe with a time resolution of 160 fs. Together with trajectory surface hopping simulations, analysis of the UED data provides a new perspective on the early time nuclear dynamics in acetylacetone. Specifically, AcAc is observed to undergo ring opening, deplanarization, and bond elongation all within the first 700 fs after photoexcitation. The monitored dynamics is associated mainly with the nuclear motion on the S 1 potential energy surface, formed after very rapid transfer from S 2 to S 1 , allowing AcAc to reach the conical intersection to intersystem crossing. Such time scales of nuclear motion are contrasted with the time scales of electronic transitions in AcAc that were previously characterized with spectroscopic methods, specifically internal conversion (<100 fs) and intersystem crossing (∼1.5 ps).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗