Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY LAYER - EFFECT OF COMPRESSIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Aerodynamic heating in the vicinity of hypersonic, axisymmetric, shock-wave boundary-layer interactions

Aerodynamic heating rates are calculated from time-dependent temperature measurements in the vicinity of shock-wave boundary-layer interactions due to conical compression ramps on an axisymmetric body. The data were acquired at the Ohio State University Aeronautical and Astronautical Research Laboratory and at the Air Force Flight Dynamics Laboratory at Mach numbers of 6 and 10. The model is a cylindrical body with a 10 deg conical nose. Conical ramps with half-angles of 10, 20, 25, 30, and 35 deg serve as shock-wave generators. Flowfield surveys are made in the vicinity of the ramp vertices, separation points, and reattachment points. Experimental results quantify temperature response and the resulting heat transfer rates as a function of ramp angle, Reynolds number and freestream Mach number. The temperature responses within the flowfield appear to be steady-state for all angles and all Reynolds numbers, and hence, the heat transfer rates appear to be steady-state.

Flanagan, M. J., Jr.↗
NASA NTRS1995

Development of a two-equation turbulence model for hypersonic flows: Evaluation of a low Reynolds number correction to the Kappa - epsilon two equation compressible turbulence model - Volume 1

The objective of the current research is the development of an improved k-epsilon two-equation compressible turbulence model for turbulent boundary layer flows experiencing strong viscous-inviscid interactions. The development of an improved model is important in the design of hypersonic vehicles such as the National Aerospace Plane (NASP) and the High Speed Civil Transport (HSCT). Improvements have been made to the low Reynolds number functions in the eddy viscosity and dissipation of solenoidal dissipation of the k-epsilon turbulence mode. These corrections offer easily applicable modifications that may be utilized for more complex geometries. The low Reynolds number corrections are functions of the turbulent Reynolds number and are therefore independent of the coordinate system. The proposed model offers advantages over some current models which are based upon the physical distance from the wall, that modify the constants of the standard model, or that make more corrections than are necessary to the governing equations. The code has been developed to solve the Favre averaged, boundary layer equations for mass, momentum, energy, turbulence kinetic energy, and dissipation of solenoidal dissipation using Keller's box scheme and the Newton spatial marching method. The code has been validated by removing the turbulent terms and comparing the solution with the Blasius solution, and by comparing the turbulent solution with an existing k-epsilon model code using wall function boundary conditions. Excellent agreement is seen between the computed solution and the Blasius solution, and between the two codes. The model has been tested for both subsonic and supersonic flat-plate turbulent boundary layer flow by comparing the computed skin friction with the Van Driest II theory and the experimental data of Weighardt; by comparing the transformed velocity profile with the data of Weighardt, and the Law of the Wall and the Law of the Wake; and by comparing the computed results of an adverse pressure gradient with the experimental data of Fernando and Smits. Good agreement is obtained with the experimental correlations for all flow conditions.

Knight, Doyle D.↗
NASA NTRS1947

A Low-Speed Investigation of a Fuselage-Side Air Inlet for use at Transonic Flight Speeds

A low-speed investigation in the Langley propeller-research tunnel of annular air inlets designed to avoid compression shocks and attendant boundary-layer separation on the fuselage ahead of the inlets at transonic flight speeds by maintaining substream flow velocities on the fuselage nose was reported in NACA RM No. L6J04. In the present investigation, one of the original annular inlets was converted by the installation of a canopy and a nose-wheel fairing into a twin side inlet in order to study problems involved in applying such an inlet to a fighter-type airplane. Extensive measurements of pressures on the surface of the model and surveys of the internal flow were conducted at angles of attack of 0 degrees, 3 degrees, and 6 degrees over a wide range of inlet-velocity ratio.

Nichols, Mark R.↗
NASA NTRS2014

A Vortical Dawn Flank Boundary Layer for Near-Radial IMF: Wind Observations on 24 October 2001

We present an example of a boundary layer tailward of the dawn terminator which is entirely populated by rolled-up flow vortices. Observations were made by Wind on 24 October 2001 as the spacecraft moved across the region at the X plane approximately equal to −13 Earth radii. Interplanetary conditions were steady with a near-radial interplanetary magnetic field (IMF). Approximately 15 vortices were observed over the 1.5 hours duration of Wind's crossing, each lasting approximately 5 min. The rolling up is inferred from the presence of a hot tenuous plasma being accelerated to speeds higher than in the adjoining magnetosheath, a circumstance which has been shown to be a reliable signature of this in single-spacecraft observations. A blob of cold dense plasma was entrained in each vortex, at whose leading edge abrupt polarity changes of field and velocity components at current sheets were regularly observed. In the frame of the average boundary layer velocity, the dense blobs were moving predominantly sunward and their scale size along the X plane was approximately 7.4 Earth radii. Inquiring into the generation mechanism of the vortices, we analyze the stability of the boundary layer to sheared flows using compressible magnetohydrodynamic Kelvin-Helmholtz theory with continuous profiles for the physical quantities. We input parameters from (i) the exact theory of magnetosheath flow under aligned solar wind field and flow vectors near the terminator and (ii) the Wind data. It is shown that the configuration is indeed Kelvin-Helmholtz (KH) unstable. This is the first reported example of KH-unstable waves at the magnetopause under a radial IMF.

Magnetosheath↗
NASA NTRS2018

Tetrahedral-Mesh Simulations of Shock-Turbulence Interaction

Despite decades of development of unstructured mesh methods, direct numerical simulations (DNS) of turbulent flows are still predominantly performed on structured or unstructured hexahedral meshes with high-order finite-difference methods, weighted essentially nonoscillatory (WENO) schemes, or hybrid schemes formed by their combinations. Tetrahedral meshes offer easy mesh generation and adaptation around complex geometries and the potential of an orientation-free grid that would benefit the isotropic nature of small-scale dissipation, as well as the solution accuracy of intermediate scales. To advance the state of the art of unstructured-mesh simulation capabilities for shock/turbulence interaction, DNS using pure tetrahedral meshes are carried out with the space-time conservation element, solution element (CESE) method in this research. By its design, the CESE method is constructed based on a non-dissipative scheme and is a genuinely multidimensional numerical framework that is free from the use of an approximate Riemann-solver. The numerical framework also provides the ability to add numerical dissipation (the nondissipative scheme acts as the reference state like that of the reversible state in thermodynamics) when needed (with justification from mathematics/physics). The above-mentioned features along with the CESE method's consistent shock-capturing approach and strong enforcement of flux conservation in spacetime offers a novel method to accurately simulate turbulent flows and their interaction with shocks using tetrahedral meshes. Two canonical problems, namely, isotropic turbulence interaction with a normal shock and a Mach 2.9 turbulent boundary layer flow over a 24deg compression corner are investigated in this study. Computational results show reasonably good agreement with experimental data and results from structured-mesh, high-order simulations available in the literature. Successful validation of these canonical problems demonstrated here paves the way for future high-fidelity supersonic flow simulations involving complex-geometries.

Venkatachari, Balaji Shankar↗
NASA NTRS1991

Methods for direct simulation of transition in hypersonic boundary layers

An implicit numerical algorithm for the time accurate solution of the compressible Navier-Stokes equations is described. Results for steady flow past a finite flat plate are presented, together with preliminary results for the temporal simulation of second mode instability in a flat plate boundary layer at Mach 4.5.

Vandervegt, J. J. W.↗
NASA NTRS2006

Validation of High-Speed Turbulent Boundary Layer and Shock-Boundary Layer Interaction Computations with the OVERFLOW Code

The capability of the OVERFLOW code to accurately compute high-speed turbulent boundary layers and turbulent shock-boundary layer interactions is being evaluated. Configurations being investigated include a Mach 2.87 flat plate to compare experimental velocity profiles and boundary layer growth, a Mach 6 flat plate to compare experimental surface heat transfer,a direct numerical simulation (DNS) at Mach 2.25 for turbulent quantities, and several Mach 3 compression ramps to compare computations of shock-boundary layer interactions to experimental laser doppler velocimetry (LDV) data and hot-wire data. The present paper describes outlines the study and presents preliminary results for two of the flat plate cases and two small-angle compression corner test cases.

Oliver, A. B.↗
NASA NTRS1982

A composite velocity procedure for the compressible Navier-Stokes equations

A new boundary-layer relaxation procedure is presented. In the spirit of the theory of matched asymptotic expansions, a multiplicative composite of the appropriate velocity representations for the inviscid and viscous regions is prescribed. The resulting equations are structured so that far from the surface of the body the momentum equations lead to the Bernoulli relation for the pressure, while the continuity equation reduces to the familiar compressible potential equation. Close to the body surface, the governing equations and solution techniques are characteristic of those describing interacting boundary-layers; although, the full Navier-Stokes equations are considered here. Laminar flow calculations for the subsonic flow over an axisymmetric boattail simulator geometry are presented for a variety of Reynolds and Mach numbers. A strongly implicit solution method is applied for the coupled velocity components.

Khosla, P. K.↗
NASA NTRS1987

Stability and transition in supersonic boundary layers

The full three-dimensional time-dependent compressible Navier-Stokes equations are numerically solved by a Fourier-Chebyshev collocation algorithm to study the stability of supersonic flows over a flat plate. Several non-linear numerical experiments suggest the existence of a secondary instability which might provide a possible route to transition. The interaction of the modes involved in this secondary instability is possibly amenable to a Floquet theory. Pertinent differences between this instability and the more common incompressible K-type instabilities are pointed out.

Erlebacher, Gordon↗
NASA NTRS1975

Computer simulation of transonic flow past airfoils with boundary layer correction

A computer program has been developed to solve the compressible flow equation for the velocity potential. The exterior of the airfoil is mapped onto the unit circle and the flow is computed on a grid in the circle plane. A relaxation method using backward differencing in the flow direction at supersonic points permits solutions for large supersonic areas. The pressure distribution resulting from the flow becomes the input to the von Karman momentum equation which when integrated gives the displacement thickness. This displacement thickness is smoothed and added to the airfoil to account for the turbulent boundary layer. The boundary layer correction is computed iteratively with the flow. Results from this program and test data agree well.

Bauer, F.↗
NASA NTRSDate not supplied

Hypersonic Fluid-Thermal-Structural Interactions on a Compression Ramp with an Embedded Compliant Panel

The fluid-thermal-structural interactions of a compliant panel embedded in a compression ramp are explored experimentally at Mach 6. The panel structural response is investigated for turbulent and transitional shock-wave/boundary-layer interactions at five distinct interaction strengths and up to four different pressure differentials. Upstream of the compression corner, fast-response piezoresistive pressure transducers show the feedback of the panel vibrations and static deflection on the upstream pressure fluctuations. The magnitude of the pressure fluctuation rms shows a reduction in the upstream disturbances when a pressure differential is applied across the compliant panel. Photogrammetry and IR thermography are used simultaneously to measure the panel deformations and surface temperature. Panel deformation, frequency shifting, and frequency bifurcation are consistent with post-thermal-buckling behavior.

hypersonic↗
NASA NTRS1954

Design and Test of Mixed-flow Impellers IV : Experimental Results for Impeller Models MFI-1 and MFI-2 with Changes in Blade Height

Modifications A and B of impeller model MFI-1 and A, B, and C of impeller model MFI-2 were investigated experimentally in an attempt to determine what allowance in blade height should be made for boundary layer and viscous losses in an impeller designed for isentropic compressible flow. A gradual increase in blade height was arbitrarily made from inlet to outlet in anticipation of a gradual build-up of boundary layer. Apparently there was a rapid build-up of boundary layer near the inlet in the experimental case rather than a gradual one. Therefore, the proper allowance for boundary layer cannot be described from the data obtained. Decreasing the pressure gradient along the shroud by reducing the blade height allowance apparently did little to increase the overall efficiency. At the design speed of 1400 feet per second, the overall adiabatic efficiency was increased from 0.83 for the MFI-1A to 0.85 for the MFI-1B with reduction in height; however, it is indicated from the theoretical velocity distribution and outlet surveys that the increase was due to a change from decelerating to accelerating flow along the hub rather than from any change along the shroud. It is further indicated that the consequences of a thickened or separated boundary layer depend not only on the design velocity gradients but also on the shape of the passage.

Hamrick, Joseph T↗
NASA NTRS1989

Transition flight experiments on a swept wing with suction

Flight experiments were conducted on a 30 degree swept wing with a perforated leading edge by systematically varying the location and amount of suction over a range of Mach number and Reynolds number. Suction was varied chordwise ahead of the front spar from either the front or rear direction by sealing spanwise perforated strips. Transition from laminar to turbulent flow was due to leading edge turbulence contamination or crossflow disturbance growth and/or Tollmien-Schlichting disturbance growth, depending on the test configuration, flight condition, and suction location. A state-of-the-art linear stability theory which accounts for body and streamline curvature and compressibility was used to study the boundary layer stability as suction location and magnitude varied. N-factor correlations with transition location were made for various suction configurations.

Maddalon, D. V.↗
NASA NTRS1991

Numerical simulation of transition in wall-bounded shear flows

The current status of numerical simulation techniques for the transition to turbulence in incompressible channel and boundary-layer flows is surveyed, and typical results are presented graphically. The focus is on direct numerical simulations based on the full nonlinear time-dependent Navier-Stokes equations without empirical closure assumptions for prescribed initial and boundary conditions. Topics addressed include the vibrating ribbon problem, space and time discretization, initial and boundary conditions, alternative methods based on the triple-deck approximation, two-dimensional channel and boundary-layer flows, three-dimensional boundary layers, wave packets and turbulent spots, compressible flows, transition control, and transition modeling.

Kleiser, Leonhard↗
NASA NTRS1992

Quasiconical flowfield structure of the three-dimensional single fin interaction

A series of conical and three-dimensional computations have been performed for the swept oblique shock wave/turbulent boundary-layer interaction generated by a 20-deg sharp fin at Mach 4 and freestream Reynolds number of 2.18 x 10 exp 5 based on the incoming boundary-layer thickness. The Reynolds-averaged compressible Navier-Stokes equations are employed with turbulence incorporated using the Baldwin-Lomax and Jones-Launder models. The computed results are basically similar for both turbulence models and display general agreement with experimental data for surface pressure and surface flow direction, although underestimating the size of the primary vortex. The computed three-dimensional flowfield displays quasiconical behavior of the surface pressure, surface flow direction, and flowfield contours of static pressure, density, and Mach number over the extent of the computational domain except for an inception region near the fin leading edge. Certain features of the flowfield model are not observed in the computations, namely, a 'normal' shock near the attachment line, transonic shocklets in the expansion region, and secondary separation. The absence of these features in the computation is believed to be indirectly attributable to limitations in the turbulence models.

Knight, Doyle D.↗
NASA NTRS1956

Development of flow distortions in a full-scale nacelle inlet at Mach numbers 0.63 and 1.6 to 2.0

The nature of flow-distortion development in the subsonic diffuser was determined for a typical full-scale axisymmetric nose inlet at Mach numbers to 2.0 and angles of attack to -8 degrees. Inlet design variables studied included 14 degrees and 17 degrees internalcowl lip angles conical compression surfaces with and without boundary-layer removal slots, and cone tip translation. Data presented include the inlet overall pressure recovery, mass flow, and distortion at the diffuser exit. Primary emphasis in the data, however, is placed on critical inlet operation, for which the flow distortion is traced from the inlet throat to the diffuser exit.

Piercy, Thomas G↗
NASA NTRS1992

Computational fluid dynamics '92; Proceedings of the European Computational Fluid Dynamics Conference, 1st, Brussels, Belgium, Sep. 7-11, 1992. Vols. 1 & 2

A conference was held on Computational Fluid Dynamics (CFD) and produced related papers. Topics included CFD algorithms, transition and turbulent flow, hypersonic reacting flow, incompressible flow, two phase flow and combustion, internal flow, compressible flow, grid generation and adaption, boundary layers, environmental and industrial applications, and non-Newtonian flow.

Hirsch, Charles↗