Search NASA⌕ Search

SEARCH · Search NASA

Results for “Biomass Utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Recovery Act: Analysis of Low-Temperature Utilization of Geothermal Resources (Final Technical Report)

Full realization of the potential of what might be considered “low-grade” geothermal resources will require that we examine many more uses for the heat than traditional electricity generation. To demonstrate that geothermal energy truly has the potential to be a national energy source we will be designing, assessing, and evaluating innovative uses for geothermal-produced water such as hybrid biomass-geothermal cogeneration of electricity and district heating and efficiency improvements to the use of cellulosic biomass in addition to utilization of geothermal in district heating for community redevelopment projects. The objectives of this project were: 1) to perform a techno-economic analysis of the integration and utilization potential of low-temperature geothermal sources. Innovative uses of low-enthalpy geothermal water were designed and examined for their ability to offset fossil fuels and decrease CO 2 emissions. 2) To perform process optimizations and economic analyses of processes that can utilize low-temperature geothermal fluids. These processes included electricity generation using biomass and district heating systems. 3) To scale up and generalize the results of three case study locations to develop a regionalized model of the utilization of low-temperature geothermal resources. A national-level, GIS-based, low-temperature geothermal resource supply model was developed and used to develop a series of national supply curves. We performed an in-depth analysis of the low-temperature geothermal resources that dominate the eastern half of the United States. The final products of this study include 17 publications, an updated version of the cost estimation software GEOPHIRES, and direct-use supply curves for low-temperature utilization of geothermal resources. The supply curves for direct use geothermal include utilization from known hydrothermal, undiscovered hydrothermal, and near-hydrothermal EGS resources and presented these results at the Stanford Geothermal Workshop. We also have incorporated our wellbore model into TOUGH2-EGS and began coding TOUGH2-EGS with the wellbore model into GEOPHIRES as a reservoir thermal drawdown option. Additionally, case studies for the WVU and Cornell campuses were performed to assess the potential for district heating and cooling at these two eastern U.S. sites.

15 GEOTHERMAL ENERGY↗

Direct Coal -to-Liquids (CTL) for Jet Fuel Using Biomass-Derived Solvents

Battelle has demonstrated a novel and potentially breakthrough technology for a direct coal-to-liquids (CTL) process for producing jet fuel using biomass-derived coal solvents (bio-solvents). The Battelle process offers a significant reduction in capital and operating costs and a substantial reduction in greenhouse gas (GHG) emissions, without requiring carbon capture and storage (CCS). The results of the project are the advancement of three steps of the hybrid coal/biomass-to-jet fuel process to the technology readiness level (TRL) of 5. The project objectives were achieved over two phases. In Phase 1, all three major process steps were explored and refined at bench-scale, including: (1) biomass conversion to high hydrogen-donor bio-solvent; (2) coal dissolution in biomass-derived bio-solvent, without requiring molecular H 2 , to produce a synthetic crude (syncrude); and (3) two-stage catalytic hydrotreating/hydrogenation of syncrude to jet fuel and other distillates. In Phase 2, all three subsystems of the CTL process were scaled up to a pre-pilot scale, and an economic analysis was carried out. A total of over 40 bio-solvents were identified and prepared. The most unique attribute of Battelle’s bio-solvents is their ability to provide much-needed hydrogen to liquefy coal and thus increase its hydrogen content so much that the resulting syncrude is liquid at room temperature. Based on the laboratory-scale testing with bituminous coals from Ohio and West Virginia, a total of 12 novel bio-solvent met the goal of greater than 80% coal solubility, with 8 bio-solvents being as good as or better than a well-known but expensive hydrogen-donor solvent, tetralin. The Battelle CTL process was then scaled up to 1 ton/day (1TPD) at a pre-pilot facility operated in Morgantown, WV. These tests were conducted, in part, to produce enough material for syncrude-upgrading testing. To convert the Battelle-CTL syncrude into a form suitable as a blending stock for jet turbine fuel, a two-step catalytic upgrading process was developed at laboratory scale and then demonstrated at pre-pilot scale facility in Pittsburg, PA. Several drums of distillate products were produced, which were then distilled into unblended (neat) synthetic jet fuel and diesel products for a detailed characterization. Based on a detailed characterization of the synthetic jet fuel, a 20% synthetic, 80% commercial jet fuel blend was prepared, which met all specifications. An analysis of the synthetic diesel product showed that it has the promise of being a drop-in fuel as super-low (less than 15 ppm)-sulfur diesel fuel. A detailed economic analysis showed that the Battelle liquefaction process is economical at between 1000 metric tons/day (MT/day) and 2000 MT/day. The unit capital cost for Battelle CTL process for making jet fuel is 50K USD/daily bbl compared to 151K USD/daily bbl for indirect CTL, based on 2011 dollars. The jet-fuel selling cost at the refinery, including a 12% capital cost factor (which included profit), for the Battelle CTL process is 61USD/bbl (1.45 USD/gallon). This is competitive with crude oil price of 48 USD/bbl. At the same time, the GHG emissions of 3.56 MT CO 2 /MT fuel were lower than the GHG emissions of 3.79 MT CO 2 /MTfuel for petroleum-based fuels and 7.77 MT CO 2 /MT fuel for indirect CTL. Thus, the use of bio-solvents completely eliminates the need for carbon capture in the case of Battelle CTL process. The superior economics and low GHG emissions for the Battelle CTL process has thus sparked worldwide interest and some potential commercialization opportunities are emerging.

01 COAL, LIGNITE, AND PEAT↗

TAP Report - Southwest Idaho Juniper Working Group

There is explicit need for characterization of the materials for possible commercialization as little characterization data exists. Pinyon-juniper woodlands are a major ecosystem type found in the Southwest and the Intermountain West regions of the United States including Nevada, Idaho and Oregon. These widespread ecosystems are characterized by the presence of several different species of pinyon and juniper as the dominant plant cover. Since the 1800s, pinyon-juniper woodlands have rapidly expanded their range at the expense of existing ecosystems. Additionally, existing woodlands have become denser, progressively creating potential fire hazards as seen in the Soda Fire, which burned more than 400 sq. miles. Land managers responsible for these areas often desire to reduce pinyon-juniper coverage on their lands for a variety of reasons, as stated in the Working Group objectives. However, the cost of clearing thinning pinyon-juniper stands can be prohibitive. One reason for this is the lack of utilization options for the resulting biomass that could help recover some of the cost of pinyon-juniper stand management. The goal of this TAP effort was to assess the feedstock characteristics of biomass from a juniper harvested from Owyhee County to evaluate possible fuel and conversion utilization options.

09 BIOMASS FUELS↗

Leveling Intermittent Renewable Energy Production Through Biomass Gasification-Based Hybrid Systems

The increased use of intermittent renewable power in the United States is forcing utilities to manage increasingly complex supply and demand interactions. This paper evaluates biomass pathways for hydrogen production and how they can be integrated with renewable resources to improve the efficiency, reliability, dispatchability, and cost of other renewable technologies. Two hybrid concepts were analyzed that involve co-production of gaseous hydrogen and electric power from thermochemical biorefineries. Both of the concepts analyzed share the basic idea of combining intermittent wind-generated electricity with a biomass gasification plant. The systems were studied in detail for process feasibility and economic performance. The best performing system was estimated to produce hydrogen at a cost of $1.67/kg. The proposed hybrid systems seek to either fill energy shortfalls by supplying hydrogen to a peaking natural gas turbine or to absorb excess renewable power during low-demand hours. Direct leveling of intermittent renewable electricity production is accomplished with either an indirectly heated biomass gasifier, or a directly heated biomass gasifier. The indirect gasification concepts studied were found to be cost competitive in cases where value is placed on controlling carbon emissions. A carbon tax in the range of $26-40 per metric ton of CO{sub 2} equivalent (CO{sub 2}e) emission makes the systems studied cost competitive with steam methane reforming (SMR) to produce hydrogen. However, some additional value must be placed on energy peaking or sinking for these plants to be economically viable. The direct gasification concept studied replaces the air separation unit (ASU) with an electrolyzer bank and is unlikely to be cost competitive in the near future. High electrolyzer costs and wind power requirements make the hybridization difficult to justify economically without downsizing the system. Based on a direct replacement of the ASU with electrolyzers, hydrogen can be produced for $0.27 premium per kilogram. Additionally, if a non-renewable, grid-mix electricity is used, the hybrid system is found to be a net CO{sub 2}e emitter.

08 HYDROGEN↗

Defining the Minimal Set of Microbial Genes Required for Valorization of Lignin Biomass (Final Report)

Project Goals: Lignin is the second most abundant biopolymer on earth and represents a critically underutilized biomass resource for hydrocarbon feedstocks. Despite substantial effort, there is still no efficient process to convert lignin to useable carbon-based platform chemicals and materials. The goal of this project is identify a minimal set of microbial enzymes necessary for lignin breakdown and sufficient for the synthesis of valuable chemical intermediates from lignin isolated as a byproduct of lignocellulosic ethanol production. These genes will be then used to engineer functional whole cell biocatalysts for tunable lignin metabolism. To date, although a number of enzymes have been associated with lignin degradation, most have been tested in isolation (as individual enzymes) and on drastically different substrates -- often dyes that are not related to lignin. In contrast, lignin utilization in nature likely occurs by microbial consortia with multiple enzymes acting synergistically. We propose to examine two separate stages of lignin breakdown carried out by the microbes that do it best: (1) early breakdown of native polymeric lignin into soluble fragments by a set of sequenced wood-rotting fungal species, and (2) downstream metabolism of these soluble lignin fragments to useful chemical intermediates by a panel of sequenced soil saprophytes. Our approach involves testing sets of genes that will be assayed combinatorially in the context of a heterologous expression host. The resulting engineered strains will be systematically assayed using soluble lignin fragments, synthetic defined polymeric lignin, and finally lignin directly sourced from lignocellulosic processing streams. In addition to resulting in a functional whole cell biocatalyst for lignin utilization, we anticipate that this approach will allow us to address key unanswered questions about lignin metabolism in nature, including: (1) Why does the Trametes versicolor genome contain 25 different class II peroxidases? (2) What is the role of laccases in lignin metabolism? Why do some aggressive lignin degraders have many laccases (e.g. >7 in T. versicolor) while others have none (e.g. P. chrysosporium)? (3) How is peroxide provided in a controlled manner to drive peroxidase activity without causing the enzyme inhibition that is so often observed in vitro? (4) What strategies do microbial lignin degraders use to avoid the problem of repolymerization during active lignin degradation? and (5) Can microbial lignin metabolism be diverted for high level production of defined aromatics? A final critical question is whether combining key minimal sets of enzymes from a wide range of organisms will result in engineered strains capable of highly efficient, streamlined pathways for lignin utilization that can be tuned for a specific carbon output. This effort will leverage DOE investments in microbial genome sequencing, and secure a critical channel for lignin biomass utilization that will also help to render lignocellulosic a viable feedstock for the production of renewable liquid biofuels.

59 BASIC BIOLOGICAL SCIENCES↗

Chemicals Derived from Biomass Thermolysis and Gasification

The United States has the potential to sustainably produce over 1 billion dry tons of nonfood biomass per year by 2030. While conversion of this biomass into fuels has garnished significant attention, these renewable feedstocks can also be converted into valuable chemicals. Analogous to petroleum refining, the coproduction of fuels and chemicals from biomass enables more complete utilization of the feedstock and supports the growth of a bio-economy by improving biorefinery economics. This chapter provides an overview of biomass thermolysis and gasification technologies, highlights existing and future chemical production opportunities, and elaborates on specific challenges associated with product separation and purification.

09 BIOMASS FUELS↗

Potential Integration Between Residual Biogenic Process Resources and Greener Hydrogen Production from Steam Reformers

Biomass conversion processes have varying efficiencies towards specific products like liquid fuels; process inefficiencies result in byproducts such as off-gases, heat, and solid residues such as char. The efficient use of these byproducts is key towards getting the maximum sustainability benefits from valuable biomass resources. For example, there are various utility product options that can utilize heat and off-gases from biomass pyrolysis processes; they include process heat and steam, hydrogen, fuel gas, and electricity. Further, there is potential for the use of the off-gases to supplement natural gas feed into steam reformers for hydrogen production. This presentation highlights results from previous analyses on tradeoffs based on utility byproduct choices (https://doi.org/10.1039/D3SE00745F); maximizing hydrogen production from off-gases is one potential winning strategy. This leads to the question regarding the utilization of these off-gases in existing steam reformers and the process impacts from feeding off-gases. Process modeling of a steam reformer system (https://doi.org/10.1002/adsu.20230021) quantifies those impacts and shows how much off-gas substitution is possible within the limits of an existing design with such an integration strategy.

biogenic gases↗

Analysis of Hybrid Hydrogen Systems: Final Report

Report on biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. Two hybrid systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at costs ($1.67/kg) within Department of Energy targets ($2.10/kg) for central biomass-derived hydrogen production while also providing value-added energy services to the electric grid.

08 HYDROGEN↗

Effects of chloride ions in acid-catalyzed biomass dehydration reactions in polar aprotic solvents

The utilization of polar aprotic solvents in acid-catalyzed biomass conversion reactions can lead to improved reaction rates and selectivities. We demonstrate that further increases in catalyst performance in polar aprotic solvents can be achieved through the addition of inorganic salts, specifically chlorides. Reaction kinetics studies of the Brønsted acid-catalyzed dehydration of fructose to hydroxymethylfurfural (HMF) show that the use of catalytic concentrations of chloride salts leads to a 10-fold increase in reactivity. Furthermore, increased HMF yields can be achieved using polar aprotic solvents mixed with chlorides. Ab initio molecular dynamics simulations (AIMD) show that highly localized negative charge on Cl– allows the chloride anion to more readily approach and stabilize the oxocarbenium ion that forms and the deprotonation transition state. High concentrations of polar aprotic solvents form local hydrophilic environments near the reactive hydroxyl group which stabilize both the proton and chloride anions and promote the dehydration of fructose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fort Yukon, Chalkyitsik, & Venetie Biomass Boiler Feasibility Study

The Council of Athabascan Tribal Governments (CATG) is a consortium of ten Gwich'in and Koyukon Athabascan tribes settled in 10 remote villages and are linked by the Yukon River System. The CATG mission is to maintain the Yukon Flats region as Indian Country by asserting traditional rights and taking responsibility for developing tribal technical capacity to manage the land and resources. It is the intent of CATG to explore and develop all opportunities for a renewable and self-sufficient energy program for each of the villages. CATG envisions utilization of forest resources both for construction and energy as one of the best long-term strategies for integrating the economic goals for the region as well as supporting the cultural and social issues. The intent for this feasibility project is to focus specifically on biomass utilization for heat, first, and for future electrical generation within the region, second. An initial determination has already been made regarding the importance of wood energy as a primary source of renewable energy to displace diesel fuel in the Yukon Flats region. A desktop study of other potential renewable resources was conducted in 2006.

09 BIOMASS FUELS↗

Green-House-Gas-Reduced Coal-and-Biomass-to-Liquid-Based Jet Fuel (GHGR-CBTL) Process - Final Technical report

This Final Technical Report describes the work and accomplishments of the project entitled, “Green-House-Gas-Reduced Coal-and-Biomass-to-Liquid-Based Jet Fuel (GHGR-CBTL) Process”. The main objective of the project was to raise the Technology Readiness Level (TRL) of the GHGR-CBTL fuel-production technology from TRL 4 to TRL 5 by producing a drop-in synthetic Jet Propellant 8 (JP-8) with a greenhouse-gas footprint less than or equal to petroleum-based JP-8 by utilizing mixtures of coal and biomass as the feedstock. The system utilizes the patented Altex fuel-production technology, which incorporates advanced catalysts developed by Pennsylvania State University. While the system was not fabricated and tested, major efforts were expended to design the 1-TPD and a full-scale plant. The system was designed, a Block-Flow Diagram (BFD), a Process-Flow Diagram (PFD), and Piping-and-Instrumentation Diagrams (P&IDs) were produced, a Bill of Materials (BOM) and associated spec sheets were produced, commercially available components were selected and procured, custom components were designed and fabricated, catalysts were developed and screened for performance, and permitting activities were conducted. Optimization tests for JP-8 production using C2 olefin as the feed were performed over a range of temperatures, pressures and WHSVs. Liquid yields of between 63 to 65% with 65% JP-8 fraction (41-42% JP-8 yield) at 50 psig were achieved. Life-Cycle Analysis (LCA) was performed by Argonne National Laboratory (ANL), and a GHGR-CBTL module was added to the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET®) model. Based upon the experimental results, the plant design was reconfigured for zero natural-gas imports and minimal electricity imports. The LCA analysis of the reconfigured process utilizing the GREET model showed that if the char from the process was utilized to produce combined heat and power (CHP) then a feed containing 23 wt% biomass and 77 wt% lignite would be needed for parity with petroleum-based JP-8. If the char is not utilized for CHP, but sequestered in a land fill, 24 wt% biomass and 76 wt% lignite would be required. A TEA was performed on this configuration following DOE guidelines and using the ANL-developed GREET module that showed that the GHGR-CBTL TOC and ECO are 69% and 58% of those for the DOE FT-Liquids Baseline Case, respectively. This analysis shows that the economics of the GHGR-CBTL process are significantly better than a gasification/FT process. No technical barriers were identified. The lower costs and the detailed design that was performed under this project are being used by Altex to attract funding partners to move the GHGR-CBTL development forward.

01 COAL, LIGNITE, AND PEAT↗

Importance of residence-time control of industrial screw-conveying reactors: Application to dilute-acid hydrolysis of biomass

Horizontal screw reactors are utilized in biorefineries for acid-catalyzed hydrolysis of xylan, which is a multi-step chemical reaction requiring accurate residence-time control. However, it is difficult to obtain online analytical measurement of reactant species. In this work, a residence-time distribution (RTD) is exhibited whose characteristics influence species yields. Sensitivity of product yield to RTD was investigated to understand the relative importance of operating control vs. inherent reactor dispersion. We find that reactor operation using a commonly used theoretical residence-time relationship can result in substantial yield losses. Instead, a model that accounts for the actual reactor RTD provides much improved results. The dispersion caused by reactor conditions only slightly hinders achieving theoretical optimal xylose yield (less than 3% yield loss for coefficient of variation less than 0.35), provided a validated RTD model is used to target the desired mean residence-time. In contrast, neglecting to account for the RTD by using the simplistic theoretical calculation results in xylose yields that are as much as 16% lower than the theoretical maximum.

09 BIOMASS FUELS↗

Co-Harvest and Anaerobic Co-Storage of Corn Grain and Stover as Biomass Feedstocks

This research investigated the utility of co-harvesting and anaerobic co-storage of corn grain and stover to positively influence their physical and chemical characteristics as a biomass feedstock. Corn grain and stover were harvested in 2019 and 2020 with a self-propelled forage harvester. Stover yield, moisture content, and composition were altered by the harvest date, stubble height, and header configuration. Harvest date had the utility of varying the stover moisture content (p < 0.001) from 42.3% to 53.5% (w.b.) and 43.1% to 53.9% (w.b.) for the 2019 and 2020 harvest years, respectively. Stubble height was also utilized to vary stover moisture content. A negative linear relationship was established between stubble height and stover moisture content for the early (R2 = 0.76) and late harvest (R2 = 0.91) dates for both years. Stover yield also showed a negative linear relationship (R2 = 0.76) with stubble height over both years. Regardless of the stubble height, the row-crop header collected more stover (p < 0.001) than the ear-snapper header. In 2020, harvested stover ranged from 5.0 to 10.5 Mg ha-1, with ha-1 representing 41% to 85% of the total available stover. In both years, stover ash content was less than 64 g kg-1. Material stored in pilot-scale silos (19 L) was well conserved during anaerobic storage, with average DM losses of 4.8% and 3.4% in 2019 and 2020, respectively. Grain moisture content averaged 23.6% (w.b.) at harvest, and 31.0% (w.b.) after storage as moisture migrated from the moist stover to the drier grain. Harvesting whole-plant corn with a forage harvester had the unwanted effect of reducing the particle size of the grain fraction, which would complicate downstream utilization. However, reducing the harvester cutterhead speed increased the fraction of intact kernels from 47% to 85% by mass. The studied system was a viable alternative to conventional corn grain and stover systems for producing feedstocks for biochemical conversion.

09 BIOMASS FUELS↗

Functional characterization of three GH10 xylanases

Decreased availability of fossil fuels has driven an increased demand for sustainable energy sources such as biofuels. One area of bioenergy research involves development of biocatalysts able to efficiently degrade biomass “waste”‐products, such as substrates derived from corn stover, rather than easily‐fermentable biomass used for food, such as starch from corn kernels. Xylanases are of interest for their ability to hydrolyze hemicellulosic sugars found in plant cell walls, allowing utilization of waste‐derived biomass. In this study, three xylanases of glycoside hydrolase family 10 (GH10) are functionally characterized and optimized for temperature and pH, as well as kinetically analyzed for xylose monomer and oligomer production. These enzymes, GH10‐4, GH10‐9, and GH10‐15, demonstrate activity upon substrates xylan and arabinoxylan. For GH10‐4, optima are 50°C at pH 8 on xylan and 45°C at pH 8 on arabinoxylan. For GH10‐9, optima are 70°C at pH 5 on xylan and 70°C at pH 5 on arabinoxylan. For GH10‐15, optima are 50°C at pH 8 on xylan and 45°C at pH 5 on arabinoxylan. Kinetic analysis reveals GH10‐4 produces xylose (X1), xylobiose (X2), xylotriose (X3), xylotetraose (X4), and xylopentaose (X5) from xylan, while GH10‐9 and GH10‐15 produce X1, X2, and X3. From arabinoxylan, GH10‐4 produces X1, X2, X3, X4, while GH10‐9 and GH10‐15 produce X1, X2, X3. Conclusive kinetic data may suggest applicability of these enzymes for industrial use within biocatalysts and contribute further insight to the functionality of enzymes within GH10. Support or Funding Information The authors are grateful for financial support by the Integrated Biological Sciences Summer Research Program (IBS‐SRP, NSF) at the University of Wisconsin‐Madison and the Great Lakes Bioenergy Research Center (GLBRC) of the U.S. Department of Energy. Presentation travel support is provided by the Ronald E. McNair Scholars Program of Winthrop University. The authors also thank Lai Bergeman, Craig Bingman, Bob Smith, Emily Beebe, Kirk Vander Meulen, Amber Smith, David Wassarman, and John Greenler for professional support.

Park, Jesslyn↗

Production of hydrogen driven from biomass waste to power Remote areas away from the electric grid utilizing fuel cells and internal combustion engines vehicles

Recent concerns over the security and reliability of the world’s energy supply has caused a flux towards the research and development of renewable sources. A leading renewable source has been found in the biomass gasification of biological materials derived from organic matters such as wood chips, forest debris, and farm waste that are found in abundance in the USA. Accordingly, there is a very strong interest worldwide in the development of new technologies that provide an in-depth understanding of this economically viable energy source. This work aims to allow the coupling of biomass gasification and fuel cell systems as well as Internal Combustion Engines (ICE) to produce high-energy efficiency, clean environmental performance and near-zero greenhouse gas emissions. Biomass gasification is a process, which produces synthesis gas (syngas) that contains 19% hydrogen and 20% carbon monoxide from inexpensive organic matter waste. This project main goal is to provide cost effective energy to the public utilizing remote farms’ waste and landfill recycling area.

08 HYDROGEN↗

Long Term Processing Using Integrated Hydropyrolysis plus Hydroconversion (IH 2 ) for the Production of Gasoline and Diesel from Biomass

Cellulosic and woody biomass can be directly converted to hydrocarbon gasoline and diesel blending components through the use of a new, economical, technology named integrated hydropyrolysis plus hydroconversion (IH 2 ). The IH 2 gasoline and diesel blending components are fully compatible with petroleum based gasoline and diesel, contain less than 1% oxygen and have less than 1 total acid number (TAN). The IH 2 gasoline is high quality and very close to a drop in fuel. The life cycle analysis (LCA) shows that the use of the IH 2 process to convert wood to gasoline and diesel results in a greater than 90% reduction in greenhouse gas emission compared to that found with fossil derived fuels. The technoeconomic analysis showed the conversion of wood using the IH 2 process can produce gasoline and diesel at less than $\$$2.00/gallon. In this project, the previously reported semi-continuous small scale IH 2 test results were confirmed in a continuous 50 kg/day pilot plant. The continuous IH 2 pilot plant used in this project was operated round the clock for over 750 hours and showed good pilot plant operability while consistently producing 26-28 wt % yields of high quality gasoline and diesel product. The IH 2 catalyst showed good stability, although more work on catalyst stability is recommended. Additional work is needed to commercialize the IH 2 technology including running large particle size biomass, modeling the hydropyrolysis step, studying the effects of process variables and building and operating a 1-50 ton/day demonstration scale plant. The IH 2 is a true game changing technology by utilizing U.S. domestic renewable biomass resources to create transportation fuels, sufficient in quantity and quality to substantially reduce our reliance on foreign crude oil. Thus, the IH 2 technology offers a path to genuine energy independence for the U. S., along with the creation of a significant number of new U.S. jobs to plant, grow, harvest, and process biomass crops into fungible fuels.

09 BIOMASS FUELS↗

Biomass energy production. Citations from the International Aerospace Abstracts data base

These 210 citations from the international literature describe the production and/or utilization of most forms of biomass as a source of energy, fuel, food, and chemical intermediates or feedstocks. Biomass conversion by incineration, gasification, pyrolysis, hydrolysis, anaerobic digestion, or fermentation, as well as by catalytic, photosynthetic, chemosynthetic, and bio-electrochemical means are among the conversion processes considered. Discussions include biomass plantation and material productivity, transportation and equipment requirements, effects, comparisons of means and efficiencies of utilization and conversion, assessments of limitations, and evaluations of economic potential.

Moore, P. W.↗

Measurement of moisture-dependent ion diffusion constants in wood cell wall layers using time-lapse micro X-ray fluorescence microscopy

Our future bioeconomy depends on increased utilization of renewable lignocellulosic biomass. Controlling the diffusion of chemicals, such as inorganic ions, within secondary plant cell walls is central to many biomass applications. However, insufficient understanding of intra-cell-wall diffusion within secondary plant cell walls is hindering the advancement of many lignocellulosic biomass applications. In this work, X-ray fluorescence microscopy was used to measure diffusion constants of K + , Cu 2+ , and Cl - diffusing through loblolly pine (Pinus taeda) cell wall layers under 70%, 75%, or 80% relative humidity (RH). Results revealed that diffusion constants increased with RH, the larger Cu 2+ diffused more slowly than the K + , and the Cl - diffusion constant was the same as that for the counter cation, indicating cations and anions diffused together to maintain charge neutrality. Comparison with electrical conductivity measurements showed that conductivity is being controlled by ion mobility over these RH. The results further support that intra-cell-wall diffusion of inorganic ions is a Fickian diffusion process occurring through rubbery amorphous polysaccharides, which contradicts previous assertions that intra-cell-wall diffusion is an aqueous process occurring through water pathways. Researchers can now utilize polymer science approaches to engineer the molecular architecture of lignocellulosic biomass to optimize properties for specific end uses.

59 BASIC BIOLOGICAL SCIENCES↗