Search NASA⌕ Search

SEARCH · Search NASA

Results for “CARBONIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Reaction Mechanisms for the Limited Reversibility of Li-O2 Chemistry in Organic Carbonate Electrolytes

The Li-O2 chemistry in nonaqueous carbonate electrolytes and the underneath reason of its limited reversibility was exhaustively investigated. The discharge products collected from the air cathode in a Li-O2 battery at different depth of discharge (DOD) were systematically analyzed with X-ray diffraction. It is revealed that, independent of the discharge depth, lithium alkylcarbonate (either lithium propylenedicarbonate - LPDC, or lithium ethylenedicarbonate - LEDC, with other related derivatives) and lithium carbonate (Li2CO3) are always the main products, obviously originated from the electrolyte solvents propylene carbonate (PC) and ethylene carbonate (EC). These lithium alkylcarbonates are obviously generated from the single-electron reductive decomposition of the corresponding carbonate solvents initiated by the attack of superoxide radical anions. On the other hand, neither lithium peroxide (Li2O2) nor lithium oxide (Li2O) is detected. More significantly, from in situ gas chromatography/mass spectroscopy it is found that Li2CO3 and Li2O cannot be oxidized even when charged up to 4.6 V vs. Li/Li+, while LPDC, LEDC and Li2O2 are readily able to, with CO2 and CO released with the re-oxidation of LPDC and LEDC. It is therefore concluded that the quasi-reversibility of Li-O2 chemistry observed hitherto in an organic carbonate-based electrolyte is actually reliant on the formation of lithium alkylcarbonates through the reductive decomposition of carbonate solvents during discharge process and the subsequent oxidation of these same alkylcarbonates during charge process. It is the poor oxidizability of these alkylcarbonate species that constitutes the obstruction to an ideal rechargeable Li-O2 battery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon in the Allende meteorite - Evidence for poorly graphitized carbon rather than carbyne

A carbon-rich acid residue from the Allende carbonaceous chondrite was examined by high-resolution transmission electron microscopy (HRTEM) and also by analytical electron microscopy. A TEM mount of this residue that has previously been reported to contain carbyne forms of carbon was shown to contain sheet silicate contaminants. These sheet silicate grains give electron diffraction patterns similar to those reported for carbynes, thus raising questions about the previous report of carbynes in this residue. Furthermore, two crystals from a glacier microspherule, which had previously been identified as carbyne VIII, were shown by microanalysis to be talc. In view of these observations it is suggested that identifications of carbyne by electron diffraction should be supported by microanalyses of the individual grains. HRTEM investigations of the Allende carbon indicate that it is a poorly crystalline graphite, structurally similar to 'glassy' carbon

Smith, P. P. K.↗

Direct comparisons of X-ray scattering and atomistic molecular dynamics simulations for precise acid copolymers and ionomers

Designing acid- and ion-containing polymers for optimal proton, ion, or water transport would benefit profoundly from predictive models or theories that relate polymer structures with ionomer morphologies. Recently, atomistic molecular dynamics (MD) simulations were performed to study the morphologies of precise poly(ethylene-co-acrylic acid) copolymer and ionomer melts. Here, we present the first direct comparisons between scattering profiles, I(q), calculated from these atomistic MD simulations and experimental X-ray data for 11 materials. This set of precise polymers has spacers of exactly 9, 15, or 21 carbons between acid groups and has been partially neutralized with Li, Na, Cs, or Zn. In these polymers, the simulations at 120 °C reveal ionic aggregates with a range of morphologies, from compact, isolated aggregates (type 1) to branched, stringy aggregates (type 2) to branched, stringy aggregates that percolate through the simulation box (type 3). Excellent agreement is found between the simulated and experimental scattering peak positions across all polymer types and aggregate morphologies. The shape of the amorphous halo in the simulated I(q) profile is in excellent agreement with experimental I(q). We found that the modified hard-sphere scattering model fits both the simulation and experimental I(q) data for type 1 aggregate morphologies, and the aggregate sizes and separations are in agreement. Given the stringy structure in types 2 and 3, we develop a scattering model based on cylindrical aggregates. Both the spherical and cylindrical scattering models fit I(q) data from the polymers with type 2 and 3 aggregates equally well, and the extracted aggregate radii and inter- and intra-aggregate spacings are in agreement between simulation and experiment. Furthermore, these dimensions are consistent with real-space analyses of the atomistic MD simulations. By combining simulations and experiments, the ionomer scattering peak can be associated with the average distance between branches of type 2 or 3 aggregates. Furthermore, this direct comparison of X-ray scattering data to the atomistic MD simulations is a substantive step toward providing a comprehensive, predictive model for ionomer morphology, gives substantial support for this atomistic MD model, and provides new credibility to the presence of stringy, branched, and percolated ionic aggregates in precise ionomer melts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation

Binders formed through alkali-activation of slags and fly ashes, including ‘fly ash geopolymers’, provide appealing properties as binders for low-emissions concrete production. However, the changes in pH and pore solution chemistry induced during accelerated carbonation testing provide unrealistically low predictions of in-service carbonation resistance. The aluminosilicate gel remaining in an alkali-activated slag system after accelerated carbonation is highly polymerised, consistent with a decalcification mechanism, while fly ash-based binders mainly carbonate through precipitation of alkali salts (bicarbonates at elevated CO{sub 2} concentrations, or carbonates under natural exposure) from the pore solution, with little change in the binder gel identifiable by nuclear magnetic resonance spectroscopy. In activated fly ash/slag blends, two distinct gels (C–A–S–H and N–A–S–H) are formed; under accelerated carbonation, the N–A–S–H gel behaves comparably to fly ash-based systems, while the C–A–S–H gel is decalcified similarly to alkali-activated slag. This provides new scope for durability optimisation, and for developing appropriate testing methodologies. -- Highlights: •C-A-S-H gel in alkali-activated slag decalcifies during accelerated carbonation. •Alkali-activated fly ash gel changes much less under CO{sub 2} exposure. •Blended slag-fly ash binder contains two coexisting gel types. •These two gels respond differently to carbonation. •Understanding of carbonation mechanisms is essential in developing test methods.

36 MATERIALS SCIENCE↗

A Study of autunite dissolution in the presence of Shewanella oneidensis MR1 and different bicarbonate concentrations - 15736

Remediation of uranium at Hanford Site 300 area via tripolyphosphate injections could sequester uranium (VI) in an insoluble form, creating different types of uranium phosphate minerals like autunite. The factors that influence the dissolution of such minerals come into question. Bacteria can play a significant role in the dissolution of minerals and the formation of secondary minerals. Formed autunite, as a phosphorus-containing mineral, can attract bacteria to liberate phosphorus, meeting their nutrient requirements and causing uranium release back into the environment. Previous studies have been conducted under aerobic conditions. This research was extended to investigate the stability of the autunite mineral under anaerobic conditions pertaining to the Hanford Site, and to study the effect of facultative anaerobic bacteria on the uranium (VI) release from autunite. Objectives: - Evaluate bacterial interactions with uranium (VI) by focusing on facultative anaerobic bacteria, Shewanella Oneidensis MR1. - Study the effect of bacteria on the dissolution of the uranyl phosphate solid phases created as a result of sodium tripolyphosphate injections into the subsurface at the Hanford 300 Area. - Evaluate the role of anaerobic bacteria as one of the factors affecting the outcome of environmental remediation. Experimental Approach: - 16 crimp-sealed bottles were prepared with 50 ml of media solution and 90 mg (4.4 mM of uranium VI) Ca-autunite mineral obtained from Hanford site. Bottles were inoculated with Shewanella Oneidensis MR1 strains when autunite was equilibrated with the media solutions. Bacteria was obtained from Pacific Northwestern National Laboratory (PNNL). - Solution media preparation: 20 mM NaHepes buffer: pH=7, 10 mM Lactate plus bicarbonate in four concentrations (0, 3, 5 and 10 of KHCO{sub 3}) and a bacteria-free control. Samples were taken from the supernatant solutions of the experimental and control bottles. Wet and dry digestion was performed until a white solid residue was acquired. Dilution was made on solid samples for KPA analysis to determine concentration of U (VI) as function of time. The results suggests that in the absence of HCO{sub 3}{sup -} there was a decrease in the of uranium (VI) concentration due to metal reducing bacteria Shewanella Oneidensis MR1, but for higher concentrations of HCO{sub 3}{sup -}, there is no significant difference in uranium (VI) reduction before and after inoculation with bacteria. - Although bottles were sealed, there is an hypothesis that it was oxygen restricted but not strictly performed under anaerobic conditions. For that matter there is a reason to repeat the experiment using the glove box to understand the uranium (VI) reduction mechanism and behavior of bacteria with oxic/anoxic interfaces. Conclusions: - Higher bicarbonate concentrations might interfere with uranium (VI) reduction by anaerobic bacteria. - It is necessary to reduce time of sampling before the inoculation and prolong sampling time after inoculation. - It might be necessary to increase concentration of lactate. Future Work: - Conduct experiment in strictly anaerobic conditions by using the glove box and evaluate if further reduction of uranium (VI) is obtained in the presence of carbonates (HCO{sub 3}{sup -}). - Finalize analysis of calcium and phosphorous via ICP instrument.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Chemical Renal Denervation in the Rat

Introduction: The recent success of renal denervation in lowering blood pressure in drug-resistant hypertensive patients has stimulated interest in developing novel approaches to renal denervation including local drug/chemical delivery. The purpose of this study was to develop a rat model in which depletion of renal norepinephrine (NE) could be used to determine the efficacy of renal denervation after the delivery of a chemical to the periadventitial space of the renal artery. Methods: Renal denervation was performed on a single renal artery of 90 rats (n = 6 rats/group). The first study determined the time course of renal denervation after surgical stripping of a renal artery plus the topical application of phenol in alcohol. The second study determined the efficacy of periadventitial delivery of hypertonic saline, guanethidine, and salicylic acid. The final study determined the dose–response relationship for paclitaxel. In all studies, renal NE content was determined by liquid chromatography–mass spectrometry. Results: Renal NE was depleted 3 and 7 days after surgical denervation. Renal NE was also depleted by periadventitial delivery of all agents tested (hypertonic saline, salicylic acid, guanethidine, and paclitaxel). A dose response was observed after the application of 150 μL of 10{sup −5} M through 10{sup −2} M paclitaxel. Conclusion: We developed a rat model in which depletion of renal NE was used to determine the efficacy of renal denervation after perivascular renal artery drug/chemical delivery. We validated this model by demonstrating the efficacy of the neurotoxic agents hypertonic saline, salicylic acid, and guanethidine and increasing doses of paclitaxel.

60 APPLIED LIFE SCIENCES↗

Synergistic Interactions During Co-Hydrothermal Liquefaction of Food Waste and Biomass Model Compounds for Increased Sustainable Aviation Fuel Production

Hydrothermal liquefaction (HTL) of lignocellulosic biomass is plagued with low biocrude yields owing to the tendency of highly reactive oxygenated intermediates to condense to form biochars. By contrast, the high protein content in food waste is comprised of substantial nitrogen species, which are known to interact strongly with oxygenates through Maillard, amide, and peptide bond formation reactions. Co-feeding food waste and lignocellulose opens new reaction pathways for biocrude formation but is currently poorly understood. This work evaluated the molecular level interactions between food waste and lignocellulose model compounds and the corresponding effect on product yields and quality. Food waste–cellulose and food waste–xylan feedstock blends achieved maximum biocrude carbon yield improvements of 12.2% and 10.1%, respectively, relative to a simple linear model that interpolates between the yields of the pure feedstocks. Increases in biocrude yield were balanced by corresponding decreases in char yield, indicating synergistic interactions between the feeds during HTL. Biocrude volatility analysis revealed that increased biocrude yield preferentially benefitted the jet fuel fraction, which comprised up to 22.6% of the total carbon yield for food waste–cellulose blends. Biocrude and char were analyzed using GC–MS and FT-IR spectroscopy to investigate the source of synergistic trends and provide greater mechanistic understanding. Key cofeeding effects included the promotion of retro-aldol condensation reactions and trans-esterification of fatty acids, sequestering carbon in the biocrude phase via the inhibition of char formation while increasing biocrude volatility toward jet fuel-range compounds. These results indicate the potential for judicious selection of HTL cofeeds to increase both biocrude yield and selectivity to desired fuel precursors, including sustainable aviation fuel.

Maillard reaction↗

Carbon dioxide (C{sup 16}O{sub 2} and C{sup 18}O{sub 2}) adsorption in zeolite Y materials: effect of cation, adsorbed water and particle size

In this study, CO{sub 2} adsorption in the presence and absence of co-adsorbed H{sub 2}O was investigated in zeolite Y. Several different zeolite Y materials were investigated including commercial NaY, commercial NaY ion-exchanged with Ba{sup 2+} and nanocrystalline NaY; herein referred to as NaY, BaY and nano-NaY. Following heating of these zeolites to 573 K and cooling to room temperature, CO{sub 2} was adsorbed as a function of pressure. FTIR spectra show that a majority of CO{sub 2} adsorbs in the pores of these three zeolites (NaY, BaY and nano-NaY) in a linear complex with the exchangeable cation, as indicated by the intense absorption band near 2350 cm{sup -1}, assigned to the 3 asymmetric stretch of adsorbed CO{sub 2}. Most interestingly is the formation of carbonate and bicarbonate on the external surface of nano-NaY zeolites as indicated by the presence of several broad absorption bands in the 1200-1800 cm{sup -1} region, suggesting unique sites for CO{sub 2} adsorption on the surface of the nanomaterial. For the other two zeolite materials investigated, bicarbonate formation is only evident in BaY zeolite in the presence of co-adsorbed water. Adsorption of {sup 18}O-labeled carbon dioxide and theoretical quantum chemical calculations confirm these assignments and conclusions. 28 refs., 9 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Lignin-Derived Carbon Fibers as Efficient Heterogeneous Solid Acid Catalysts for Esterification of Oleic Acid

Here, the production of biodiesel by the esterification of oleic acid, as an example of free fatty acid (FFA), was explored by using a new solid acid catalyst derived from lignin, a highly abundant low-cost biomass material. The catalyst was synthesized from lignin-derived carbon fiber by straightforward sulfonation and contains 1.86 mmol/g of sulfonic acid (-SO 3 H) groups. The catalyst was characterized by a variety of techniques including PXRD, TGA, TPD-MS, SEM, and XPS to understand the surface chemistry and the result of sulfonation. It was found that the sulfonated lignin-derived carbon fiber (CF-SO 3 H) catalyst was very efficient at esterifying oleic acid at 80 o C in 4 hours, with 10 wt. % catalyst (in terms of oleic acid content) and at a 10:1 molar ratio of methanol: oleic acid with a yield of 92%. Furthermore, the catalyst can be reused with no significant loss in activity after 4 cycles. Hence, synthesizing solid acid catalysts from lignin-derived carbon fiber affords a novel strategy for producing biodiesel via ‘green chemistry’.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detecting Reactive Products in Carbon Capture Polymers with Chemical Shift Anisotropy and Machine Learning

Aminopolymers are attractive sorbents for CO 2 direct air capture applications due to their high density of amine groups, which can readily react with atmospheric levels of CO 2 to form chemisorbed species. The identity of these chemisorbed species and the functional groups that form upon oxidative degradation depends on both material properties and processing conditions, forming a variety of carbonyl-type sites such as ammonium carbamates, bicarbonates, carbonates, carbamic acids, ureas, and amides. 13 C solid-state nuclear magnetic resonance (NMR) is often used to help elucidate the identity of these reacted species, but it is challenging due to the narrow chemical shift range of carbonyl sites. Herein, we demonstrate the application of a two-dimensional (2D) chemical shift anisotropy (CSA) recoupling pulse sequence (ROCSA) to obtain CSA tensor values at each isotropic chemical shift, overcoming limitations of isotropic peak resolution. CSA tensor values describe the local chemical environment and can readily differentiate between the chemisorbed and degradation products. To aid identification, we also developed a k-nearest neighbor (kNN) classification model to distinguish the functional groups via their CSA tensor parameters. This methodology was demonstrated on poly(ethylenimine) in γ-Al 2 O 3 exposed to CO 2 and showed that the chemisorbed products are ammonium carbamate and a mixed carbamate–carbamic acid species. The sample was analyzed again after desorption at 100 °C inducing mild degradation, and the remaining products were strongly bound carbamate and urea species. In conclusion, the combination of 2D CSA measurements coupled with a kNN classification model enhances the ability to accurately identify chemisorbed or degradation products in complex carbon capture materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aryl azide-sulfonamide hybrids induce cellular apoptosis: synthesis and preliminary screening of their cytotoxicity in human HCT116 and A549 cancer cell lines

Simple, small, drug-like molecules bearing aryl azide and aryl sulfonamide moieties were designed and synthesized. The cytotoxic activity of these compounds was measured on colon cancer HCT116, lung cancer A549, and normal fibroblast cells F180 cell lines. All the synthesized compounds showed a significant cytotoxic activity below 100 µM in both HCT116 and A549 cells. Compounds 10e and 10f exhibited the most potent activity with IC{sub 50} values of 2.20 and 6.27 µM on A549 and HCT116 cells, respectively. Also, compounds 10e and 10f showed significant tumor selectivity on HCT116 and A549 cell lines when compared with the reference cytotoxic agent staurosporine. This indicated the promising safety of these compounds on normal cells. In addition, flow cytometry studies showed that HCT116 cell lines treated with the most active compound 10f were arrested in the G2/M phase of the cell cycle. 10f boosted both early and late apoptosis at HCT116 cells. A hypothetical pharmacophore model was built using 14 reported potent carbonic anhydrase I inhibitors. The pharmacophoric study revealed that the tested sulfonamide derivatives 10e and 10f showed significant fitting on the pharmacophore query with reasonable RMSD values. Molecular docking study showed a chelation reaction with the key Zn atom, in addition to different hydrogen bonding, and van der Waals interactions with several important amino acids inside the CA Ι active site. .

60 APPLIED LIFE SCIENCES↗

Electrically driven proton transfer promotes Brønsted acid catalysis by orders of magnitude

Electric fields play a key role in enzymatic catalysis and can enhance reaction rates by 100,000-fold, but the same rate enhancements have yet to be achieved in thermochemical heterogeneous catalysis. In this work, we probe the influence of catalyst potential and interfacial electric fields on heterogeneous Brønsted acid catalysis. We observed that variations in applied potential of ~380 mV led to a 100,000-fold rate enhancement for 1-methylcyclopentanol dehydration, which was catalyzed by carbon-supported phosphotungstic acid. Mechanistic studies support a model in which the interfacial electrostatic potential drop drives quasi-equilibrated proton transfer to the adsorbed substrate prior to rate-limiting C–O bond cleavage. Large increases in rate with potential were also observed for the same reaction catalyzed by Ti/TiO y H x and for the Friedel Crafts acylation of anisole with acetic anhydride by carbon-supported phosphotungstic acid.

Science & Technology - Other Topics↗

Chemists demonstrate sustainable approach to carbon dioxide capture from air

Chemists at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a practical, energy-efficient method of capturing carbon dioxide (CO2) directly from air. They report their findings in Nature Energy. If deployed at large scale and coupled to geologic storage, the technique may bolster the portfolio of responses to global climate change.

54 ENVIRONMENTAL SCIENCES↗

Alternative pathway linked by hydrogen bonds connects heme-Fe of cytochrome c with subunit II-CuA of cytochrome a

Highlights: • Hydrogen bond, rather than carbon-carbon σ-bond, as the bridging element for electron transfer in proteins gained experimental evidence. • An alternative pathway linked by hydrogen bonds, is identified from heme-Fe of cytochrome c to subunit II-CuA of cytochrome a. • Such hydrogen bond-linked pathways occur in proteins and may be considered for intramolecular and intermolecular electron transfer. The bridging element for electron transfer in proteins is the hydrogen bond according to the new experimental perspective in preference to carbon-carbon σ-bond presently used. The purpose of this study is to identify an alternative pathway linked by hydrogen bonds suitable for electron transfer from heme-Fe of cytochrome c to subunit II-CuA of cytochrome a. A pathway consisting of 15 delocalized electron systems including peptide bonds, 5 polar groups of side chains of amino acid residues and 8 water molecules, linked by 27 hydrogen bonds, exists between the two metal electron centers of heme-Fe of cytochrome c, cytochrome c and of subunit II-CuA of cytochrome a. Pathways built of delocalized π-electron systems, polar groups and water molecules linked by hydrogen bonds may be considered for intramolecular and intermolecular electron transfer in proteins.

60 APPLIED LIFE SCIENCES↗

Rheological and microstructural characterization of aqueous suspensions of carbon black and reduced graphene oxide

Carbon black is often used as a conductivity enhancer in battery electrodes. Reduced graphene oxide is another conducting material, with a high aspect ratio sheet-like morphology, and offers the possibility of generating a conducting network at loadings that are small compared to carbon black. Suspensions of conducting carbon, active materials and binders are typically coated on current collectors during the formation of electrodes. The rheology of these suspensions is an important indicator of the connectivity of particles in the suspension and impacts the electrical conductivity as well as the thickness of the coated layer. In this work, the rheology and microstructures of aqueous suspensions of para-aminobenzoic acid terminated carbon black (CB) with and without reduced graphene oxide (RGO) were investigated. The CB loading varied between 0.05 wt.% -10 wt.%, while the samples containing RGO had an RGO loading of 0.05 wt.%. The pH of the suspension was varied from 7.5 to 3. The carboxyl groups on the CB surface are deprotonated at pH 7.5, making the particles hydrophilic. Protonation of the carboxylate groups at pH 3 makes the particles partially hydrophobic. Suspensions of CB showed Newtonian behavior at all loadings for pH 7.5, and at loadings below 1.5 wt.% for pH 3. They are shear thinning at loadings between 1.5–10 wt.%. Interestingly, the low shear viscosity is non-monotonic with CB loading, rising up to a CB loading of 7.5 wt.%, and then dropping at 10 wt.%. Cryogenic scanning electron microscopy (SEM) showed CB particles forming aggregates at pH 3 for CB loadings greater than 1.5 wt.%. At pH 3, addition of 0.05 wt.% RGO resulted in a viscosity increase for suspensions containing 0.5 wt.% CB, as the RGO formed connections with CB particles that enhanced network formation. Adding RGO had little effect on suspensions that had 1.5 wt.% CB. The combination of SEM imaging and suspension rheology provides insight into the particle connectivity for the carbon-based materials studied here. These insights will be useful in determining coating conditions for slurries used in rechargeable battery electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon nanodot precursors enable ultrahigh-loading copper single-atom catalysts for oxygen reduction reaction

Single-atom catalysts (SACs) have attracted significant attention in electrocatalysis due to their high metal utilization and tunable electronic structures; however, their practical implementation is often limited by poor atomic dispersion, low metal loadings (typically < 1 wt%), and insufficient anchoring of single metal atoms on catalyst supports. Herein, we report a simple and versatile strategy to synthesize copper single-atom catalysts (Cu-SACs) with ultrahigh metal loading using citric-acid-derived carbon nanodots as metal-capturing precursors. Through hydrothermal treatment followed by pyrolysis in the presence of urea, atomically dispersed copper atoms coordinated with nitrogen are incorporated into a carbon framework, achieving a Cu loading of up to 20 wt% while maintaining atomic dispersion. Notably, a significant fraction of the copper single atoms exists as Cu+–N2 coordination, which provides under-coordinated and catalytically active sites. The resulting Cu-SAC exhibits promising oxygen reduction reaction (ORR) activity in alkaline media, delivering a limiting current density comparable to that of commercial 20 wt% Pt/C with a predominant four-electron reduction pathway. Despite this high intrinsic activity, durability tests reveal gradual performance degradation under prolonged electrochemical operation, which is attributed to demetallation and aggregation of copper single atoms into metallic nanoparticles. These results demonstrate the potential of carbon nanodot-based platforms for synthesizing high-loading SACs, while underscoring the critical need to simultaneously control carbon porosity and metal–nitrogen coordination to enhance active-site accessibility and durability.

Sharma, Prakhar [University of Kentucky]↗

Metabolic associations with archaea drive shifts in hydrogen isotope fractionation in sulfate‐reducing bacterial lipids in cocultures and methane seeps

Abstract Correlation between hydrogen isotope fractionation in fatty acids and carbon metabolism in pure cultures of bacteria indicates the potential of biomarker D/H analysis as a tool for diagnosing carbon substrate usage in environmental samples. However, most environments, in particular anaerobic habitats, are built from metabolic networks of micro‐organisms rather than a single organism. The effect of these networks on D/H of lipids has not been explored and may complicate the interpretation of these analyses. Syntrophy represents an extreme example of metabolic interdependence. Here, we analyzed the effect of metabolic interactions on the D/H biosignatures of sulfate‐reducing bacteria ( SRB ) using both laboratory maintained cocultures of the methanogen Methanosarcina acetivorans and the SRB Desulfococcus multivorans in addition to environmental samples harboring uncultured syntrophic consortia of anaerobic methane‐oxidizing archaea ( ANME ) and sulfate‐reducing Deltaproteobacteria ( SRB ) recovered from deep‐sea methane seeps. Consistent with previously reported trends, we observed a ~80‰ range in hydrogen isotope fractionation (ε lipid–water ) for D. multivorans grown under different carbon assimilation conditions, with more D‐enriched values associated with heterotrophic growth. In contrast, for cocultures of D. multivorans with M. acetivorans, we observed a reduced range of ε lipid – water values (~36‰) across substrates with shifts of up to 61‰ compared to monocultures. Sediment cores from methane seep settings in Hydrate Ridge (offshore Oregon, USA ) showed similar D‐enrichment in diagnostic SRB fatty acids coinciding with peaks in ANME / SRB consortia concentration suggesting that metabolic associations are connected to the observed shifts in ε lipid–water values.

Dawson, K. S.↗