Search NASA⌕ Search

SEARCH · Search NASA

Results for “CITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

A clearer picture of who lives in the world’s cities

A new city-level dataset examines how urban population structures have changed worldwide between 2000 and 2020. Here, the work reveals divergent age distributions, sex ratios and migration patterns across more than 10,000 cities, and it provides evidence for locally tailored urban planning.

Zimmer, Andrew [Oak Ridge National Laboratory (ORN↗

Investigating Indoor Radon Levels and Influencing Factors in Primary Schools of Zulfi City, Saudi Arabia

Measurement of indoor Concentrations were performed in Zulfi city of Saudi Arabia, using CR-39 track etch detectors. This investigation focused on the influence of different parameters, namely different locations, school categories, school building types, and room type as well as on the existence of differences in radon concentration at floor levels. We divided the Zulfi city into five regions, keeping in mind their geographical locations between Tuwaiq Mountains and Al-Thuwayrat sands. The measured average radon concentrations for regions 1-5 respectively are: 87.0{+-}14.2 Bq/m{sup 3}, 83.4{+-}6.0 Bq/m{sup 3}, 61.6{+-}6.4 Bq/m{sup 3}, 63.7{+-}5.4 Bq/m{sup 3} and 87.5{+-}6.Bq/m{sup 3} and the minimum concentrations are 28.0 Bq/m{sup 3}, 5.5 Bq/m{sup 3}, 1.1 Bq/m{sup 3}, 1.0 Bq/m{sup 3} and 24 Bq/m{sup 3} respectively. These results are still within normal limits and below the action level of 148 Bqm{sup -3} set by the U.S. Environmental Protection Agency (EPA). A test of significance using Minitab program was applied to investigate if radon levels in regions are significantly different from each other. We tried all combinations, and found the following results. The ''within regions''(different location) test yielded, region 2 is not significant versus region ''1''(p = 0.783) and versus region ''5''(P = 0.646), whereas it is significant versus region ''3''(P = 0.0160) and also versus region ''4''(p = 0.018). We investigated government and rented school's building also and none was found significantly different (p = 0.052). Floors of the same building were tested in order to examine the radon concentration as a function of storey level. No significant difference was observed at floor levels (p = 0.009). When girl's schools versus Boys and kindergartens schools were tested they were found significantly different. It is believed that this significant difference is due to geographical nature of the area, since most of the girl's schools were selected from regions 2 and 3, these regions are relatively close to the Tuwaiq mountains whereas other regions are near to the Al-Thuwayrat sands.

54 ENVIRONMENTAL SCIENCES↗

Tsunami evacuation mathematical model for the city of Padang

Tsunami is a series of wave trains which travels with high speed on the sea surface. This traveling wave is caused by the displacement of a large volume of water after the occurrence of an underwater earthquake or volcano eruptions. The speed of tsunami decreases when it reaches the sea shore along with the increase of its amplitudes. Two large tsunamis had occurred in the last decades in Indonesia with huge casualties and large damages. Indonesian Tsunami Early Warning System has been installed along the west coast of Sumatra. This early warning system will give about 10-15 minutes to evacuate people from high risk regions to the safe areas. Here in this paper, a mathematical model for Tsunami evacuation is presented with the city of Padang as a study case. In the model, the safe areas are chosen from the existing and selected high rise buildings, low risk region with relatively high altitude and (proposed to be built) a flyover ring road. Each gathering points are located in the radius of approximately 1 km from the ring road. The model is formulated as an optimization problem with the total normalized evacuation time as the objective function. The constraints consist of maximum allowable evacuation time in each route, maximum capacity of each safe area, and the number of people to be evacuated. The optimization problem is solved numerically using linear programming method with Matlab. Numerical results are shown for various evacuation scenarios for the city of Padang.

54 ENVIRONMENTAL SCIENCES↗

An indoor radon survey of the X-ray rooms of Mexico City hospitals

This paper presents the results of measurements of indoor radon concentrations in the X-ray rooms of a selection of hospitals in the metropolitan area of Mexico City. The metropolitan area of Mexico City is Mexico's largest metropolitan area by population; the number of patients requiring the use of X-rays is also the highest. An understanding of indoor radon concentrations in X-ray rooms is necessary for the estimation of the radiological risk to which patients, radiologists and medical technicians are exposed. The indoor radon concentrations were monitored for a period of six months using nuclear track detectors (NTD) consisting of a closed-end cup system with CR-39 (Lantrack Registered-Sign ) polycarbonate as detector material. The indoor radon concentrations were found to be between 75 and 170 Bq m{sup -3}, below the USEPA-recommended indoor radon action level for working places of 400 Bq m{sup -3}. It is hoped that the results of this study will contribute to the establishment of recommended action levels by the Mexican regulatory authorities responsible for nuclear safety.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Seismic hazard analysis for Jayapura city, Papua

Jayapura city had destructive earthquake which occurred on June 25, 1976 with the maximum intensity VII MMI scale. Probabilistic methods are used to determine the earthquake hazard by considering all possible earthquakes that can occur in this region. Earthquake source models using three types of source models are subduction model; comes from the New Guinea Trench subduction zone (North Papuan Thrust), fault models; derived from fault Yapen, TareraAiduna, Wamena, Memberamo, Waipago, Jayapura, and Jayawijaya, and 7 background models to accommodate unknown earthquakes. Amplification factor using geomorphological approaches are corrected by the measurement data. This data is related to rock type and depth of soft soil. Site class in Jayapura city can be grouped into classes B, C, D and E, with the amplification between 0.5 – 6. Hazard maps are presented with a 10% probability of earthquake occurrence within a period of 500 years for the dominant periods of 0.0, 0.2, and 1.0 seconds.

58 GEOSCIENCES↗

Short-Term Energy and Meteorological Impacts on Thanksgiving CO2 in Salt Lake City

Abstract Long-term, high-frequency atmospheric CO2 measurements at multiple sites in the Salt Lake City (SLC), Utah, reveal that annual and monthly CO2 variability aligns with a priori estimates of emissions from anthropogenic and biological sources. In this study, we investigate whether short-term fluctuations in anthropogenic emissions, as captured in the Vulcan3 dataset for the United States, can be detected in atmospheric CO2 observations. Specifically, we focus on Thanksgiving holidays, when traffic and energy usage patterns differ from the rest of November. Onroad CO2 emissions exhibit a double peak during weekday morning and evening rush hours but remain relatively low on weekends and Thanksgiving. Interestingly, CO2 mole fractions during Thanksgiving were higher than the rest of November at all SLC monitoring sites, particularly from 2008 to 2013. This increase is partially attributed to elevated energy-related emissions — especially residential sources — and meteorological factors such as weak wind speeds, cold temperature, and a low planetary boundary layer height (PBLH).

 While CO₂ emissions and mole fraction patterns align over time, notable spatial differences exist. For instance, the near-highway site in Murray shows the highest CO₂ mole fractions despite low local emissions, suggesting pollution transport via highways and wind advection. Random Forest model-based SHapley Additive exPlanations (SHAP) analysis reveals that onroad emissions dominate CO2 contributions on weekdays and weekends, while energy-related emissions play a larger role during Thanksgiving, alongside meteorological drivers such as wind speed and PBLH. Across six urban cities, CO2 emissions display a consistent pattern: residential and commercial (onroad) emissions peak during Thanksgiving (weekday) with substantial (minimal) year-to-year variability. These findings highlight that urban CO₂ variability is driven by the combined influence of emissions and meteorology, underscoring the need for integrated mitigation strategies. Additionally, multi-site measurements are essential for accurate source attribution and the development of effective policy interventions. 

Ryoo, Ju-Mee (ORCID:0000000234256296)↗

MO-DE-BRA-03: The Ottawa Medical Physics Institute (OMPI): A Practical Model for Academic Program Collaboration in a Multi-Centre City

Purpose: To build a world-class medical physics educational program that capitalizes on expertise distributed over several clinical, government, and academic centres. Few if any of these centres would have the critical mass to solely resource a program. Methods: In order to enable an academic program, stakeholders from five institutions made a proposal to Carleton University for a) a research network with defined membership requirements and a process for accepting new members, and b) a graduate specialization (MSc and PhD) in medical physics. Both proposals were accepted and the program has grown steadily. Our courses are taught by medical physicists from across the collaboration. Our students have access to physicists in: clinical radiotherapy (the Ottawa Cancer Centre treats 4500 new patients/y), radiology, cardiology and nuclear medicine, Canada’s primary standards dosimetry laboratory, radiobiology, and university-based medical physics research. Our graduate courses emphasize the foundational physics plus applied aspects of imaging, radiotherapy, and radiobiology. Active researchers in the city-wide volunteer-run network are appointed as adjunct professors by Physics, giving them access to national funding competitions and partial student funding through teaching assistantships while opening up facilities in their institutions for student thesis research. Results: The medical physics network has grown to ∼40 members from eight institutions and includes five full-time faculty in Physics and 17 adjunct research professors. The graduate student population is ∼20. Our graduates have proceeded to a spectrum of careers. Our alumni list includes a CCPM Past-President, the current COMP President, many clinical physicists, and the heads of at least three major clinical medical physics departments. Our PhD was Ontario’s first CAMPEP-accredited program. Conclusion: A self-governing volunteer network is the foundational element that enables an MSc/PhD medical physics program in a city with multiple physicist employers. It enriches graduate education with an unusually broad range of expertise.

61 RADIATION PROTECTION AND DOSIMETRY↗

Deconstructing laws of accessibility and facility distribution in cities

The era of the automobile has seriously degraded the quality of urban life through costly travel and visible environmental effects. A new urban planning paradigm must be at the heart of our road map for the years to come, the one where, within minutes, inhabitants can access their basic living needs by bike or by foot. In this work, we present novel insights of the interplay between the distributions of facilities and population that maximize accessibility over the existing road networks. Results in six cities reveal that travel costs could be reduced in half through redistributing facilities. In the optimal scenario, the average travel distance can be modeled as a functional form of the number of facilities and the population density. As an application of this finding, it is possible to estimate the number of facilities needed for reaching a desired average travel distance given the population distribution in a city.

42 ENGINEERING↗

Using Digital Trace Data to Identify Regions and Cities

A greater understanding of human dynamics as they play out in both physical space and through inter-personal communication is vital for the design and development of intelligent and resilient cities. Physical context provides insight in to the space-time distribution of population and their activity patterns, while inter-personal communication can, for the first time, be measured at scale through virtual interactions. The confluence of these two enables spatial social network analysis in the built environment for edge computing, knowledge discovery, and artificial intelligence activities. In this work, we propose a novel method to discover such dynamics. We use a dataset of 72 million tweets to develop a spatially embedded network of communication, and then use community detection algorithms to explore regional and urban delineation in the United States. We find that the broad spatial delineation of communities and community sub-structure is consistent with major United States socio-cultural regions, states, and major metropolitan areas. We describe how these methods could be extended to generate a measure of socially cohesive regions that can be consistently applied anywhere there is a sufficiently rich data source. We hope the proposed methods will generate new perspectives on smart and resilient cities.

Brelsford, Christa↗

Decision-support and Emissions Prediction Interactive Cities Tool

The Decision-support and Emissions Prediction Interactive Cities Tool (DEPICT) aims at predicting the cross-sectoral (building construction, operation and vehicles) energy consumption and greenhouse gases emissions at campus and urban scale. It leverages capabilities of multiple modeling tools: EnergyPlus for building operation, CalEEMod for building construction and gas vehicle, BEAM for electric vehicles and SAM for building–integrated photovoltaics. It distinguishes from other cross-sectoral model such as CalEEMod or BEST in that it uses physical models, rather than empirical models, for all sectors, which allows for a more accurate and customizable quantification. It is relevant for short-term multi-sectoral decision making by developers and city planners and long-term policy making by municipal and state officials. Information about all the developers

Ravache, Baptiste↗

Artificial Intelligence–Enabled Digital Twin for U.S. Cities

Over 50 participants—including national laboratory researchers, academic scholars, industry representatives, and stakeholders from the City of Chicago—convened in person and online to assess the readiness and potential of an Artificial Intelligence–Enabled Digital Twin (AIDT) for urban systems, with the Greater Chicago area serving as the benchmark location. The workshop underscored that the Chicago Urban Integrated Field Laboratory provides an unparalleled testbed for developing and validating urban DTs—combining dense, multiscale observations, advanced physics-based and AI modeling capabilities, and strong stakeholder and industry engagement. Discussions highlighted available datasets, AI architectures for high resolution, multipurpose urban DTs, key applications, and near- and long-term priorities for scaling this framework within Chicago and to other U.S. and global cities.

AIDT↗

New York City Impacts on a Regional Heat Wave

Abstract Extreme heat events are projected to increase in magnitude and frequency throughout this century due to increasing global temperatures, making it critically important to acquire improved understanding of their genesis and interactions with large cities. This study presents an application of the factor separation method to assess combined impacts of a synoptic scale heat wave, urban land cover, and urban energy and momentum fluxes on temperatures and winds over New York City via use of high resolution simulations (1 km grid spacing) with an urbanized WRF model. Results showed that, while the heat wave had the largest contribution to temperatures (> 8°C), urban surface factors matched it in highly urbanized areas. Surface factors matched this in highly urbanized areas during night and early morning hours, with contributions up to 5°C, when calm land breeze conditions result in a strong urban heat island. Positive interactions between all factors during morning and nighttime indicate urban heat island amplification of up to 4°C during the heat wave. Midtown Manhattan vertical cross-sections, where urban canopies are most dense, showed a change in the sign (from positive to negative) of the contribution of the urban fluxes between night and day below 500 m, possibly due to radiation blocking and increased thermal storage by buildings as well as frictional effects opposing the incoming warm air.

54 ENVIRONMENTAL SCIENCES↗

2000 The Twin Cities Metropolitan Area Travel Behavior Inventory

The 2000 Twin Cities Metropolitan Area Travel Behavior Inventory, conducted by Twin Cities Metropolitan Council—Saint Paul, was the first major travel survey in the region since 1990. The 2000 inventory includes a home interview survey, an establishment survey, a transit survey, external station traffic counts, and an external station origin/destination survey. The study area under the household inventory survey included the seven counties of the regional Metropolitan Planning Organization and thirteen adjacent counties. Demographic, socioeconomic, and travel data were gathered for 6,386 households. Of these, 6,219 households completed the travel logs, which includes household members older than five years old.

1Hz data↗

FleetREDI Insight: Beverage Delivery in New York City

Capturing real-world data is critical to improving efficiency and supporting technology advancements in commercial vehicles. FleetREDI’s insights provide detailed duty cycle information and highlight unique aspects of the given dataset. Each insight delivers a quick look at the collected data by summarizing the operation and identifying key findings of the initial analysis. This FleetREDI insight explores beverage delivery tractors operating in New York City. Last-mile beverage delivery supports local bars and restaurants throughout Manhattan and the broader New York City area. Manhattan Beer Distributors is a beverage delivery company operating in Manhattan and the Bronx. Logging devices were installed in 17 vehicles, and operational data were collected between August and October 2022. Two types of vehicles were included in data collection: 7 tractors and 10 bay trucks. Using NLR’s FleetREDI data platform, this dataset provides a summary of daily operation to help understand duty cycle characteristics. This includes daily distance, fuel use, and estimated engine-produced energy consumption for 17 bay trucks and tractors that operated more than 7,500 miles in slow-speed urban operation. ![FleetREDI beverage delivery](FleetREDI-beverage-delivery-nyc.jpg)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗