Search NASA⌕ Search

SEARCH · Search NASA

Results for “CLOSURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Dependence of CCN closure relationship with organic fraction from two airborne field campaigns over mid-latitude land and ocean

This study investigates the relationship between measured and calculated cloud condensation nuclei (CCN) number concentration and its dependence with organic fraction utilizing aircraft observations from The Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA, 2017–2018) and The Holistic Interactions of Shallow Clouds, Aerosols, and Land Ecosystems (HI-SCALE, 2016) campaigns, which represent midlatitude marine and continental environments, respectively. For the ACE-ENA marine region, aerosol and CCN concentrations were significantly higher in summer than in winter, whereas at continental site for HI-SCALE, aerosol and CCN concentrations showed no pronounced differences between spring and autumn. Using aerosol chemical composition and number size distribution data, CCN concentrations at various supersaturations are calculated based on Köhler theory and then compared with observations from CCN counter. The results show that CCN closure performs well at both sites with a slight overestimation, with mean closure ratio (CR) of 1.13 and 1.17, respectively. Further investigation reveals that CR at lower supersaturation perform better than that at higher supersaturation. The dependence of CR on organic mass fraction (MForg) varies by environment: for marine aerosols, CR decreases with increasing organic fraction at lower supersaturations, whereas continental aerosols exhibit a consistent overestimation, with CR decreasing as organic fraction increases at higher supersaturations. This study provides key insights into CCN characteristics over midlatitude marine and continental environments, emphasizing the necessity of incorporating size-resolved chemical composition and mixing states into future model parameterizations, and contributing to a better understanding of aerosol–cloud interactions.

ACE-ENA field campaign↗
NASA NTRS1966

Actuator device schedules rate of valve closure

Prevalve actuator schedules the closure rate of a valve. The actuator is spring loaded to produce a normally open valve and pneumatically powered to close the valve. The closure rate is controlled by means of pneumatic snubber and booster circuitry.

Source record↗
NASA NTRS1972

Guinea pig ductus arteriosus. II - Irreversible closure after birth.

To investigate the mechanism underlying irreversibility of ductal closure after birth, studies were undertaken to determine the exact time course for the onset of irreversible closure of the guinea pig ductus arteriosus. Parallel studies of the reactivity of ductal smooth muscle to oxygen and studies of the postpartum cellular changes within the vessel were also carried out.

Fay, F. S.↗
NASA NTRS1974

Application of an invariant second-order closure model to compressible turbulent shear layers

A second-order closure model for two-dimensional, compressible shear flows is investigated using the invariant modeling technique developed by Donaldson. The invariant model parameters were originally selected by comparison of model predictions with critical experimental data on basic incompressible flows. Additional modeling for compressible flows has been introduced. A number of different shear flows such as the free shear layer, flat plate boundary layer and a simulation of the mixing region of a chemical laser are computed. The model is consistent with first-order closure turbulence models for equilibrium flows and is further capable of predicting nonequilibrium flows that cannot be correctly solved by eddy viscosity models. The results are in generally good agreement with experimental measurements but suggest the need for inclusion of a Mach number dependent model of the pressure diffusion terms in order to adequately represent high speed compressible flows.

Varma, A. K.↗
NASA NTRS1975

The influence of crack closure and elasto-plastic flow on the bending of a cracked plate

The influence of crack closure and elastoplastic flow on the bending behavior of thin cracked plates is investigated using an incremental elastoplastic plate bending finite element computer program. The finite element program was developed using assumptions consistent with Kirchhoff fourth-order plate theory while the material property treatment permits general isotropic work hardening with local elastic unloading. This technique is applied to the problem of a large centrally through cracked plate subject to remote circular bending. Comparison is drawn between two cases of the bending problem. The first neglects the possibility of crack face interference with bending, and the second includes a kinematic prohibition against the crack face from passing through the symmetry plane. Results are reported which isolate the effects of elastoplastic flow and crack closure.

Jones, D. P.↗
NASA NTRS1976

A finite-element analysis of fatigue crack closure

The paper is concerned with the application of a two-dimensional, nonlinear, finite-element analysis using an incremental theory of plasticity to predict crack-closure and crack-opening stresses during the crack-growth process under cyclic loading. A two-dimensional finite-element computer program is developed, which accounts for both elastic-plastic material behavior and changing boundary conditions associated with crack extension and intermittent contact of the crack surfaces under cyclic loading. An efficient technique to account for changing boundary conditions under cyclic loading is also incorporated into the nonlinear analysis program. This program is used to study crack extension and crack closure behavior in a center-cracked panel under constant-amplitude and two-level block loading. The calculated crack-opening stresses are found to be quantitatively consistent with experimental measurements.

Newman, J. C., Jr.↗
NASA NTRS1977

Equations and closure methods

Basic differential equations governing compressible turbulent boundary layer flow are reviewed, including conservation of mass and energy, momentum equations derived from Navier-Stokes equations, and equations of state. Closure procedures were broken down into: (1) simple or zeroth-order methods, (2) first-order or mean field closure methods, and (3) second-order or mean turbulence field methods.

Source record↗
NASA NTRS1979

An elastic-plastic analysis of fatigue crack closure in modes I and II

In this paper, an efficient elastic-plastic finite element procedure to analyze crack-closure and, its effects on fatigue crack growth under general spectrum loading, is presented. A hybrid-displacement finite element procedure is used to properly treat the stress and strain singularities near the crack-tip; and crack-growth under cyclic loading is simulated by the translation of certain 'core' elements, near the crack-tip, in which proper stress and strain singularities were embedded. Both pure mode I and mode II types of cyclic loading are considered. In the mode I case, four types of cyclic loading, viz., constant amplitude block loading, high-to-low block loading, low-to-high block, and a single overload in an otherwise constant amplitude block loading are considered; whereas in mode II, only a constant amplitude block loading is considered. Detailed results are presented for the crack-closure and opening-stresses, crack-surface deformation profiles, etc., in each case. Certain observations, based on the present numerical results, concerning various factors that cause crack growth acceleration or retardation under general spectrum loading, are presented and discussed.

Nakagaki, M.↗
NASA NTRS1979

A possible closure relation for heat transport in the solar wind

The objective of the present paper is to search for an empirical closure relation for solar wind heat transport that applies to a microscopic scale. This task is approached by using the quasi-linear wave-particle formalism proposed by Perkins (1973) as a guide to derive an equation relating the relative drift speed between core-electron and proton populations to local bulk flow conditions. The resulting relationship, containing one free parameter, is found to provide a good characterization of Los Alamos Imp electron data measuring during the period from March 1971 through August 1974. An empirical closure relation is implied by this result because of the observed proportionality between heat flux and relative drift speed.

Feldman, W. C.↗
NASA NTRS1981

Effect of forest canopy closure on incoming solar radiance

In order to better understand the physical processes involved in defoliation assessment from remotely sensed data, a field study was designed to investigate the effect of forest canopy closure and other environmental variables on incoming solar radiation. Diffuse radiation measurements were recorded in red, infrared, and middle infrared wavelengths using the Mark 2 three band field radiometer. Results to date indicate that the percent canopy closure is the single most important variable affecting incoming solar radiation. In the visible and near infrared regions, interaction between time of day and date (defined later as solar zenith angle) also affect radiometric response. Aspect has only limited influence on radiance response. These same variables do not influence middle infrared response, however. Uniformity of the forest canopy appears to be more important. These results are compared to LANDSAT MSS classification results of gypsy moth defoliation.

Dottavio, C. L.↗
NASA NTRS1980

Microcrack closure in rocks under stress - Direct observation

Direct observations of the closure of microcracks in rocks under increasing stress are reported. Uniaxial stresses up to 300 bars were applied to untreated and previously heated samples of Westerly granite and Frederick diabase by a small hydraulic press which fit entirely within a scanning electron microscope. Crack closure characteristics are found to depend on crack orientation, with cracks perpendicular to the applied stress closing and those parallel tending to open, as well as crack aspect ratio, crack intersection properties, stress concentrations and surface roughness. Uniaxial and hydrostatic stress measurements are found to be strongly dependent on fracture content as observed by SEM, and the observed hysteresis in strain measurements in the first stress cycles is also related to microscopic processes

Batzle, M. L.↗
NASA NTRS1980

Methods of using closure phases in radio aperture synthesis

A simple iterative algorithm for reconstructing the images of compact radio sources from very-long-baseline interferometry (VLBI) measurements of visibility amplitudes and 'closure' phases is described. The method makes efficient use of redundant sampling of spatial frequencies by making a global solution of phase 'closure' equations for a complete set of observations.

Rogers, A. E. E.↗
NASA NTRS1981

On the mechanism of ray closure in comet tails

The folding phenomenon of comet tail rays is explained by means of an electric drift due to convectional electric fields. This mechanism results in an angular rate of closure which reduces to that obtained by Ness and Donn (1966) if the velocity profile across the tail is linear and the plasma conductivity is ideal. Observations of both the ray closure and the disconnection events point to the phenomenon of anomalous resistivity. Magnetic fields of about 30-40 gammas in the coma and of 10 gammas in the distant tail (at 1 AU) are estimated from the MHD momentum equation.

Ershkovich, A. I.↗
NASA NTRS1983

Numerical study of a separating and reattaching flow by using Reynolds-stress tubulence closure

The numerical study of the Reynolds-stress turbulence closure for separating, reattaching, recirculating and redeveloping flow is summarized. The calculations were made for two different closure models of pressure - strain correlation. The results were compared with the experimental data. Furthermore, these results were compared with the computations made by using the one layer and three layer treatment of k-epsilon turbulence model which were developed. Generally the computations by the Reynolds-stress model show better results than those by the k-epsilon model, in particular, some improvement was noticed in the redeveloping region of the separating and reattaching flow in a pipe with sudden expansion.

Amano, R. S.↗
NASA NTRS1984

Problems in simulating the stratocumulus-topped boundary layer with a third-order closure model

The Andre et al. (1976, 1978) third-order closure model, in which the time rate of change terms, the relaxation and rapid effects for pressure-related terms, and the clipping approximation are used along with the quasi-normal closure, is invoked in the study of turbulence in a cloudy layer that is radiatively cooled from above. A spurious oscillation whose greatest amplitude lies near the inversion is shown by analysis to arise from the mean gradient and buoyancy terms of the triple-moment equations. An attempt is made to damp the oscillation through the introduction of diffusion terms into the triple-moment equations. The results obtained are noted to be sensitive to the ad hoc eddy coefficient applied in the third-moment equations.

Moeng, C.-H.↗
NASA NTRS1984

A numerical study of a separating and reattaching flow by using Reynolds-stress turbulence closure

The numerical study of the Reynolds-stress turbulence closure for separating, reattaching, recirculating and redeveloping flow is summarized. The calculations were made for two different closure models of pressure-strain correlation. The results were compared with the experimental data. Furthermore, these results were compared with the computations made by using the one layer and three layer treatment of k-epsilon turbulence model which were developed. Generally the computations by the Reynolds-stress model show better results than those by the k-epsilon model, in particular, some improvement was noticed in the redeveloping region of the separating and reattaching flow in a pipe with sudden expansion.

Amano, R. S.↗
NASA NTRS1985

A study of Reynolds-stress closure model

A hybrid model of the Reynolds stress closure was developed. This model was tested for various sizes of step flow, and the computed Reynolds stress behavior was compared with experimental data. The third order closure model was reviewed. Transport equations for the triple velocity correlation were developed and implemented in a numerical code to evaluate the behavior of the triple velocity products in various regions of the flow field including recirculating, reattaching, and redeveloping flow domains.

Amano, R. S.↗
NASA NTRS1984

Computation and turbulence closure models for shear flows in rotating curved bodies

This paper is concerned with the effects of rotation and curvature on the turbulence closure model. The k-epsilon model that includes the effects of curvature has been modified to include the anisotropy in turbulence. A space-marching algorithm which solves the parabolized Navier-Stokes equations is coupled with the turbulence closure model to predict the turbulent shear flow over a rotating cylinder and inside a rotating channel. The agreement between the predictions and available data is good. The rotation and curvature effects are predicted well.

Pouagare, M.↗