Search NASA⌕ Search

SEARCH · Search NASA

Results for “COALESCENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Formation of a compound stream between 0.85 AU and 6.2 AU and its effects on solar energetic particles and galactic cosmic rays

This paper describes the formation of a compound stream as a result of the interaction and coalescence of a series of five streams (a slow transient stream, two corotating streams, and two exceptionally fast transient streams) observed by the Helios B (HB) satellite near 0.85 AU. The compound stream and two merged interaction regions were also observed by the Voyager 1 satellite near 6.2 AU when it was nearly radially aligned with the HB. Closely associated with this compound stream was one of the largest solar energetic particle events observed beyond 5 AU. The relationship of this compound stream and its magnetic fields to the intensity profiles of solar energetic particles and galactic cosmic rays is discussed.

Burlaga, L. F.↗

Rate-dependent mode I interlaminar crack growth mechanisms in graphite/epoxy and graphite/PEEK

In this paper the mode I fracture behavior of graphite/epoxy and graphite/PEEK composites is examined over four decades of crosshead rates (0.25-250 mm/min). Straight-sided double-cantilever-beam specimens consisting of unidirectional laminates were tested at room temperature. For graphite/epoxy the load-deflection response was linear to fracture, and stable slow crack growth initiating at the highest load level was observed for all rates tested. In contrast, mode I crack growth in the graphite/PEEK material was often unstable and showed stick-slip behavior. Subcritical crack growth occurring prior to the onset of fracture was observed at intermediate displacement rates. A mechanism for the fracture behavior of the graphite/PEEK material (based on viscoelastic, plastic, and microcrack coalescence in the process zone) is proposed and related to the observed rate-dependent phenomena.

Gillespie, J. W., Jr.↗

Large-scale fluctuations in the interplanetary medium

Power spectra of measurements of the magnetic field strength in the heliosphere obtained by Voyager 1 between 1 AU and 9 AU have the form of a power law f exp -a from periods of several hours to at least 6 days. The exponent was a = 2.0 + or - 0.05 for all of the spectra considered, which is the exponent for a series of steps and for Burgers' (1971) turbulence. Spectra of large-scale speed fluctuations also have the form f exp - b from a period of a few hours to periods greater than 13 days in the region from 1 AU to 8.9 AU. The exponent b is generally somewhat larger than b = 2, implying some 'persistence' of the speed fluctuations. The low-frequency cutoff (outer cutoff) of the power law increases from a period of 6.5 days at 1 AU to 26 days at (6.1-8.9) AU, which can be attributed to: (1) the coalescence of interaction regions and (2) a transfer of energy from the spectrum of large-scale speed fluctuations. The outer cutoff of the spectrum of speed fluctuations increases from a period of 13 days at 1 AU to 26 days between a few AU and 8.9 AU. Both the magnetic field strength fluctuations and the speed fluctuations have fractal behavior, suggesting that they are self affine rather than dominated by a few large discontinuities.

Burlaga, L. F.↗

Approximate methods for black hole collisions

The head-on collision of two nonrotating black holes, initially falling toward each other with speed of approach equal to escape velocity, is studied. The initial-value problem for the two-black-hole configuration is solved by giving the extrinsic curvature on a Euclidean space slice, with the equal masses of the two holes and their separation as free parameters. An approximating space-time is then constructed by stacking up a whole sequence of initial-value slices with decreasing separation between the black holes. The space-time singularities at the centers of the two black holes collide at some instant of time, and after that time the space-time so constructed is just the Schwarzschild solution with mass equal to the total mass of both black holes. The approximating space-time describes the coalescence of the event horizons, but contains no gravitational waves.

Eardley, D. M.↗

On the evolution of tidal capture X-ray binaries - 4U 2127+12 (M15) to 4U 1820-30 (NGC 6624)

A new evolutionary scenario for X-ray binaries in globular clusters, which begins with a tidal capture of a main-sequence star by a neutron star and ends with a white dwarf-neutron star system, is presented. For tidal captures of main-sequence stars into orbits too wide to begin mass transfer immediately, the subsequent evolution of the secondary can lead to a common envelope binary similar to what the 9 hr X-ray binary 4U 2127+12 in M15 is suspected to be. If the common envelope is thick enough, it may cause the neutron star and the white dwarf core of the secondary to spiral in, producing a detached white dwarf-neutron star system. Subsequently, gravitational radiation losses may evolve this into the configuration seen in the 11 minute X-ray binary 4U 1820-30 in NGC 6624. This model appears more likely on statistical grounds than formation by collision of a neutron star and a red giant. In some circumstances, the latter process may result in unstable mass transfer, which would result in coalescence rather than a binary system like 4U 1820-30.

Bailyn, Charles D.↗

Observation of nonlinear wave decay processes in the solar wind by the AMPTE IRM plasma wave experiment

Nonlinear wave decay processes have been detected in the solar wind by the plasma wave experiment aboard the Active Magnetospheric Particle Tracer Explorers (AMPTE) IRM spacecraft. The main process is the generation of ultralow-frequency ion acoustic waves from the decay of Langmuir waves near the electron plasma frequency. Frequently, this is accompanied by an enhancement of emissions near twice the plasma frequency. This enhancement is most likely due to the generation of electromagnetic waves from the coalescence of two Langmuir waves. These processes occur within the electron foreshock in front of the earth's bow shock.

Koons, H. C.↗

Plume formation in the D-double prime-layer and the roughness of the core-mantle boundary

A series of very-high-resolution finite element calculations of plume formation in the D-double prime-layer has been performed for several plausible rheologies and boundary conditions in order to study both the early and later stages of boundary layer development. The results show that plumes are initiated by coalescence of small-scale convective instabilities within the low-viscosity region immediately above the core-mantle boundary (CMB). These instabilities support topographic roughness on the CMB having horizontal scales of 20-50 km and provide a source for scattered P-waves seen as precursors to the phases PKIKP and PKKP. The calculated structure of fully developed plumes emerging from the D-double prime-layer consists of 5-50 cm/yr flow confined to 50-100 km thick vertical conduits. With strongly temperature-dependent viscosity, plumes exhibit time-dependent behavior, including upward propagating solitary conduit waves, which may contribute to episodicity in hotspot volcanism.

Olson, Peter↗

Atmospheric science

The following types of experiments for a proposed Space Station Microgravity Particle Research Facility are described: (1) growth of liquid water drop populations; (2) coalescence; (3) drop breakup; (4) breakup of freezing drops; (5) ice nucleation for large aerosols or bacteria; (6) scavenging of gases, for example, SO2 oxidation; (7) phoretic forces, i.e., thermophoresis versus diffusiophoresis; (8) Rayleigh bursting of drops; (9) charge separation due to collisions of rimed and unrimed ice; (10) charged drop dynamics; (11) growth of particles in other planetary atmospheres; and (12) freezing and liquid-liquid evaporation. The required capabilities and desired hardware for the facility are detailed.

Hamill, Patrick↗

Crustal evolution and the eclogite to granulite phase transition in xenoliths from the West African Craton

A suite of eclogite and granulite facies xenoliths from kimberlite pipes in the Archean Man Shield of West Africa is described. The xenoliths include lithologies ranging in composition from komatiite to anorthosite and appear to be geochemically, petrologically, and geophysically related. The suite may represent fractionation of felsic material separated from ancient mantle and added to early Archean crust. The samples can be used to define a xenolith geotherm, which may represent an ancient episode of high heat flow. The samples also imply that the crust-mantle boundary is a gradational and possibly interlayered geochemical, mineralogical, and seismic transition. It is speculated that the depleted subcontinental mantle required by diamond bearing coalescence of smaller depletion cells formed by extraction of ancient crustal components. These depleted zones are surrounded by fertile asthenospheric mantle, which may have given rise to later flood basalts such as the Karroo and Parana Provinces.

Haggerty, S. E.↗

Studies of aerothermal loads generated in regions of shock/shock interaction in hypersonic flow

Detailed measurements of heat transfer and pressure distribution have been made in the present study of the aerothermal characteristics of regions of two-dimensional shock/shock interaction generated by the incidence of single and multiple shocks onto the bow shock ahead of a spanwise cylinder. For transitional flows, the measurements demonstrated a large increase in the aerothermal loads with increasing Mach number that cannot be predicted by simple phenomenological models. The studies with multiple incident shocks demonstrate that the largest aerothermal loads are generated on the cylinder when the shocks coalesce before they are incident on the bow shock.

Holden, M. S.↗

Three-dimensional hydrodynamical simulations of stellar collisions. I - Equal-mass main-sequence stars

Two distinct mass-loss mechanisms are noted in the present, fully three-dimensional calculations of collisions between identical stars. While strong shocks in nearly head-on collisions lead to high-velocity jets perpendicular to the collision axis, with increasing mass loss as impact velocity at infinity increases from zero to 2.3 times the escape velocity from the stellar surface, low velocity encounters lead to a sharp increase in mass loss at impact parameters that correspond to nearly-grazing collisions in a two-stage process. In the first stage, the two stars become gravitationally bound due to the encounter's energy dissipation; these binary components then violently coalesce during subsequent periastron passage.

Benz, Willy↗

Characteristics of fluid flow in the combustion synthesis of TiC from the elements

The results of a numerical investigation of finite reservoir effects on capillary spreading at small reservoir dimensions are presently related to wave propagation phenomena in the combustion synthesis of TiC from its two elemental constituents. It is noted that gravitational forces can affect bubble coalescence by nonbuoyant means under the suitable conditions, although these conditions are expected to be rare in combustion synthesis. Finite-curved reservoirs can drive capillary flow due to surface tension and wall contact forces; these cause the wall and the metal to be completely reconfigured during combustion synthesis.

Valone, S. M.↗

Of drops and bubbles - The technology of space processing

It is possible to manipulate a large, molten mass of material, such as a glass, aboard an orbital platform using acoustic fields. Attention is presently given to the problem of bubble removal from such a melt; it is desirable to make small bubbles coalesce into larger ones through floating melt rotation, to create an artificial convective field in which the bubbles will move centripetally to the axis of rotation. Computer models of bubble migration have been developed in order to define the operational conditions required aboard such experiment platforms as the Space Shuttle Orbiter.

Subramanian, R. Shankar↗

Effects of crucible wetting during solidification of immiscible Pb-Zn

Many industrial uses for liquid phase miscibility gap alloys are proposed. However, the commercial production of these alloys into useful ingots with a reasonable amount of homogeneity is arduous because of their immiscibility in the liquid state. In the low-g environment of space gravitational settling forces are abated, thus solidification of an immiscible alloys with a uniform distribution of phases becomes feasible. Elimination of gravitational settling and coalescence processes in low-g also makes possible the study of other separation and coarsening mechanisms. Even with gravitational separation forces reduced, many low-g experiments have resulted in severely segregated structures. The segregation in many cases was due to preferential wetting of the crucible by one of the immiscible liquids. The objective was to analyze the wetting behavior of Pb-Zn alloys on various crucible materials in an effort to identify a crucible in which the fluid flow induced by preferential wetting is minimized. It is proposed that by choosing the crucible for a particular alloy so that the difference in surface energy between the solid and two liqud phases is minimized, the effects of preferential wetting can be diminished and possibly avoided. Qualitative experiments were conducted and have shown the competitive wetting behavior of the immiscible Pb-Zn system and 13 different crucible materials.

Degroh, Henry C., III↗

Interior characteristics at mid-levels of thunderstorms in the southeastern United States

Data characterizing the vertical wind structure and hydrometeors within cumulonimbus clouds in the southeastern United States were collected by the armored T-28 aircraft during the 1986 Cooperative Huntsville Meteorological Experiment (COHMEX). Data analysis concentrated on the hydrometeor character and development, as well as the general microphysical and kinematic structure of the clouds penetrated. The high reflectivities which sometimes exceeded the usual 55 dBz limit set for the T-28, are not necessarily related to hail in the COHMEX storms. Instead, large numbers of millimeter-size particles were found, while the hail infrequently encountered was generally small. The fact that the larger hydrometeors were usually found in narrow and weak updrafts that appeared to be well mixed suggests that a coalescence mechanism was active in many of the storms. The depth of warm cloud (typically about 3.5 km) present in these storms apparently allows ample time for particles to reach the observed millimeter sizes. The presence of cloud droplets in the largest sizes measured supports this mechanism. Ice processes play a role in the precipitation, but hail was unable to grow very large in these storms probably because the high concentrations of observed growth centers suggest a natural beneficial competition process.

Musil, Dennis J.↗

Proterozoic Bushveld-Vredefort catastrophe: Possible causes and consequences

Bushveld Complex and Vredefort Dome are unique features, formed in close proximity during the same time interval, approximately 2 Ga. Both show evidence of catastrophic events in the shallow marine environment of the otherwise stable Kaapvaal Craton. Explanation by multiple impacts of an asteroid, brecciated by an inter-asteroidal collision and disintegrating in Earth's gravity field is supported by pseudotachylite, shatter cones, coesite, and stishovite at Vredefort but these shock phenomena were not found in the Bushveld Complex. The Bushveld Complex was formerly interpreted as a lopolith, a view incompatible with gravity, electrical resistivity, magnetic, and seismic-reflection data. It is outlined by five inward-dipping lobes of layered ultramafic-mafic plutonic rocks that partly coalesce to form a basin-like feature 400 km in diameter and 65,000 sq. km. in area, equivalent to a small lunar mare. The Bushveld Complex is orders of magnitudes larger than other proposed terrestrial impact structures and differs from them in important ways. Its principal members, in order of age, are Rooiberg Felsite, RLS, and Lebowa Granite. The Bushveld-Vredefort events occurred during the interval from neutral or reducing atmosphere to oxidizing atmosphere. This transition is usually related to the evolution of photosynthesizing organisms. If the impact hypothesis for Bushveld-Vredefort can be confirmed, it may represent a global catastrophe sufficient to contribute to environmental changes favoring aerobic photosynthesizing eukaryotes over anaerobic prokaryotes.

Elston, W. E.↗

High-temperature LDV seed particle development

The feasibility of developing a method for making monodisperse, unagglomerated spherical particles greater than 50 nm in diameter was demonstrated. Carbonaceous particles were made by pyrolyzing ethylene with a pulsed CO2 laser, thereby creating a non-equilibrium mixture of carbon, hydrogen, hydrocarbon vapors, and unpyrolyzed ethylene. Via a complex series of reactions, the carbon and hydrocarbon vapors quickly condensed into the spherical particles. By cooling and dispersing them in a supersonic expansion immediately after their creation, the hot newly-formed spheres were prevented from colliding and coalescing, thus preventing the problem of agglomeration which as plagued other investigators studying laser-simulated particle formation. The cold particles could be left suspended in the residual gases indefinitely without agglomerating. Their uniform sizes and unagglomerated nature were visualized by collecting the particles on filters that were subsequently examined using electron microscopy. It was found the mean particle size can be coarsely controlled by varying the initial ethylene pressure, and can be finely controlled by varying the fluence (energy/unit area) with which the laser irradiates the gas. The motivating application for this research was to manufacture particles that could be used as laser Doppler velocimetry (LDV) seeds in high-temperature high-speed flows. Though the particles made in this program will not evaporate until heated to about 3000 K, and thus could serve as LDV seeds in some applications, they are not ideal when the hot atmosphere is also oxidizing. In that situation, ceramic materials would be preferable. Research performed elsewhere has demonstrated that selected ceramic materials can be manufactured by laser pyrolysis of appropriate supply gases. It is anticipated that, when the same gases are used in conjunction with the rapid cooling technique, unagglomerated spherical ceramic particles can be made with little difficulty. Such particles would also be valuable to manufacturers of ceramic or abrasive products, and this technique may find its greatest commercial potential in those areas.

Frish, Michael B.↗

Warm fog dissipation using large volume water sprays

To accomplish the removal of warm fog about an area such as an airport runway, a plurality of nozzles along a line adjacent the area propelled water jets through the fog to heights of approximately twenty-five meters. Each water jet breaks up forming a water drop size distribution that falls through the fog overtaking, colliding, and coalescing with individual fog droplets and thereby removes the fog. A water retrieval system is used to collect the water and return it to reservoirs for pumping it to the nozzles once again.

Vernon W Keller↗