Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONCENTRATION RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Reactions of Propyl Radicals: A Shock Tube - VUV Photoionization Mass Spectrometry Study

The pyrolytic reactions of n-propyl and i-propyl radicals and their precursors have been investigated at elevated temperatures and pressures (600 – 900 K and 5 – 8 bar). The studies were performed in a miniature high repetition rate shock tube with synchrotron vacuum ultraviolet photoionization mass spectrometry yielding comprehensive datasets of temporal and photoionization energy dependencies of reagents and products. The propyl radicals were generated by pyrolysis of alkyl nitrites. In addition to the main decomposition path, NO elimination, the mass spectra allowed an alternative minor path via HNO elimination to be identified and quantified. For the n-propyl precursor the HNO elimination route accounted for 9% of the alkyl nitrite while for the i-propyl precursor it was 2.5%. These values are in good agreement with a recent study on i-butyl radicals in the same apparatus at similar conditions. The ratio of disproportionation/recombination was obtained for n- propyl from the relative concentrations of n-hexane and propene and for i-propyl from 2,3-dimethyl butane and propene. For n-propyl the ratio is 0.3 and 1.2 for i-propyl, both are independent of temperature and pressure over the experimental range. The disproportionation/recombination ratios are about a factor of 2 higher than prior evaluations that are based mainly on room temperature data. The experimental results are some of the first from the apparatus used and comments are made about the technique, challenges encountered, and suggestions for future developments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Frozen storage of proteins: Use of mannitol to generate a homogenous freeze-concentrate

Therapeutic proteins may be subjected to several freeze–thaw cycles throughout manufacturing and storage. The protein solution composition and the freezing conditions may lead to incomplete ice crystallization in the frozen state. This can also result in freeze-concentrate heterogeneity characterized by multiple glass transition temperatures and protein destabilization. The overall objective was to investigate the potential advantages of including a crystallizing excipient (mannitol) along with a sugar (sucrose or trehalose) for frozen storage. Here, this study showed that the addition of mannitol, a readily crystallizing excipient, facilitated ice crystallization. Inclusion of an isothermal hold during cooling (annealing) maximized the mannitol crystallization and resulted in a homogenous freeze-concentrate of a constant composition characterized by a single glass transition temperature. The role of freezing rate and annealing on both mannitol and ice crystallization were discerned using high intensity synchrotron radiation. The addition of sucrose or trehalose, at an appropriate concentration, stabilized the protein. The mannitol to sugar ratio (3:1 or 1:1, 5 % w/v) was optimized to selectively cause maximal crystallization of mannitol while retaining the sugar amorphous. Human serum albumin (1 mg/mL) in these optimized and annealed compositions did not show any meaningful aggregation, even after multiple freeze–thaw cycles. Thus, in addition to a sugar as a stabilizer, the use of a crystallizing excipient coupled with an annealing step can provide an avenue for frozen storage of proteins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Assessing Impacts of Plant Stoichiometric Traits on Terrestrial Ecosystem Carbon Accumulation Using the E3SM Land Model

Carbon (C) enters into the terrestrial ecosystems via photosynthesis and cycles through the system together with other essential nutrients (i.e., nitrogen [N] and phosphorus [P]). Such a strong coupling of C, N, and P leads to the theoretical prediction that limited nutrient availability will limit photosynthesis rate, plant growth, and future terrestrial C dynamics. However, the lack of reliable information about plant tissue stoichiometric constraints remains a challenge for quantifying nutrient limitations on projected global C cycling. In this study, we harmonized observed plant tissue C:N:P stoichiometry from more than 6,000 plant species with the commonly used plant functional type framework in global land models. Using observed C:N:P stoichiometry and the flexibility of these ratios as emergent plant traits, we show that observationally constrained fixed plant stoichiometry does not improve model estimates of present-day C dynamics compared with unconstrained stoichiometry. However, adopting stoichiometric flexibility significantly improves model predictions of C fluxes and stocks. The 21st century simulations with RCP8.5 CO 2 concentrations show that stoichiometric flexibility, rather than baseline stoichiometric ratios, is the dominant controller of plant productivity and ecosystem C accumulation in modeled responses to CO 2 fertilization. The enhanced nutrient limitations and plant P use efficiency mainly explain this result. This study is consistent with the previous consensus that nutrient availability will limit xfuture land carbon sequestration but challenges the idea that imbalances between C and nutrient supplies and fixed stoichiometry limit future land C sinks. We show here that it is necessary to represent nutrient stoichiometric flexibility in models to accurately project future terrestrial ecosystem carbon sequestration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Record performance in intrinsic, impurity-free lateral diamond photoconductive semiconductor switches

Photoconductive semiconductor switches (PCSSs) are fabricated on type IIa diamond substrates with varying boron and nitrogen impurity levels (<10 14 –10 16 cm –3 ). The photoresponse of lateral PCSS is reported over the incident laser wavelength range (212–240 nm), energy per pulse (5–65 μJ), and DC bias (–1.2 to +1.2 kV). The PCSS device with the lowest boron and nitrogen impurity concentration achieves the highest normalized responsivity of 9.1 × 10 –8 A-cm/W-V, peak photocurrent of 8.0 A, and on/off ratio of 2.3 × 10 11 at a DC bias of +1.2 kV with the potential for even higher currents at increased DC bias. All PCSS display fast rise times (<3 ns), limited by the laser's rise time. However, photoresponse measurements reveal that higher impurity levels reduce the photocurrent and decrease the on/off ratio. Furthermore, these results highlight the performance advantages of using low background concentration type IIa diamond substrates for PCSS fabrication and present a promising route toward advanced high-power, high-speed diamond-based switches.

42 ENGINEERING↗
DOE OSTI2021

Effects of Glymes on the Distribution of Mg(B 10 H 10 ) and Mg(B 12 H 12 ) from the Thermolysis of Mg(BH 4 ) 2

We examined the effects of concentrations and identities of various glymes, from monoglyme up to tetraglyme, on H 2 release from the thermolysis of Mg(BH 4 ) 2 at 160–200 °C for 8 h. 11 B NMR analysis shows major products of Mg(B 10 H 10 ) and Mg(B 12 H 12 ); however, their relative ratio is highly dependent both on the identity and concentration of the glyme to Mg(BH 4 ) 2 . Selective formation of Mg(B 10 H 10 ) was observed with an equivalent of monoglyme and 0.25 equivalent of tetraglyme. However, thermolysis of Mg(BH 4 ) 2 in the presence of stoichiometric or greater equivalent of glymes can lead to unselective formation of Mg(B 10 H 10 ) and Mg(B 12 H 12 ) products or inhibition of H 2 release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Simultaneous Isotopic Analysis of U, Pu, and Am in Spent Nuclear Fuel by Resonance Ionization Mass Spectrometry

Solid samples of spent nuclear fuel were analyzed for actinide isotopic composition by resonance ionization mass spectrometry. Isotopes of U, Pu, and Am were simultaneously quantified using a new method that removes and/or resolves the isobaric interferences at 238 U/ 238 Pu and 241 Pu/ 241 Am without sample preparation other than cutting and mounting small (~10 μm) samples. Trends in burnup and neutron capture product distributions were correlated with the sampling positions inside the reactor. Overall, the results show the skin effect, in which the core and near-edge regions of a fuel pellet exhibit strong differences in actinide concentrations and isotope distributions due to differences in the neutron energy spectra between the pellet rim and the core. While no elemental concentration measurements were made, the ability to measure the 238 Pu/ 239 Pu ratio in the presence of a 7400× excess of 238 U enabled an estimate of the enhancement in Pu concentration due to the skin effect at the rim of the pellet.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Assessment of Low-Level Pu Isotope Ratio Measurements Using Multicollector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS/MS) Equipped with a Pre-Mass Filter

We present an initial investigation into the performance of a multicollector inductively coupled plasmamass spectrometer equipped with a pre-mass filter (Neoma MC-ICP-MS/MS) for making plutonium (Pu) isotope ratio measurements on solutions containing low level (i.e., pg mL –1 ) Pu concentrations. This assessment was achieved by comparison of the 240 Pu/ 239 Pu, 241 Pu/ 239 Pu, and 242 Pu/ 239 Pu ratios attained over a one month period on the MC-ICP-MS/MS with the long-term (∼1 year) performance observed on the predecessor MC-ICP-MS (Neptune Plus) instrument each equipped with an equipped with an APEXΩ desolvating nebulizer for repeated measurements of certified reference materials from New Brunswick Program Office (NBL PO) CRM 136a and CRM 137. The MC-ICP-MS/MS performance of repeated measurement of CRM 136a (n = 20) resulted in mean values of 240 Pu/ 239 Pu = 0.1448 ± 0.0006, 241 Pu/ 239 Pu = 0.00371 ± 0.00006, and 242 Pu/ 239 Pu = 0.00682 ± 0.00006 (k = 2). The CRM 137 (n = 20), analyzed during the same analytical sessions, produced mean values for 240 Pu/ 239 Pu = 0.2414 ± 0.0006, 241 Pu/ 239 Pu = 0.00464 ± 0.00007, and 242 Pu/ 239 Pu = 0.0157 ± 0.0001 (k = 2). These results closely align with the certificate values for CRM 136a and CRM 137 and are within the k = 2 envelopes defined by the long-term performance of the traditional MC-ICP-MS approach (Neptune Plus). Examination of the performance of the various Pu isotope ratios as a function of total Pu content revealed accurate results (<3% relative difference, or RD) above ∼50 fg total Pu. The results presented here demonstrate the capability of the MC-ICP-MS/MS making accurate and precise low level Pu isotopic measurements. While the intent of this work was not to investigate the functionality of the collision cell, the pre-mass filter was employed. Future studies are warranted to investigate the entire capability of the MC-ICP-MS/MS collision cell and pre-cell mass filter optimization for performing low level Pu isotope measurements, even in mixed matrix samples.

CRM↗
DOE OSTI2024

The Mobility of Mo during Microbially Mediated Ferrihydrite Phase Transformation

Molybdenum (Mo) is an essential nutrient for almost all organisms. However, at high concentrations, it can be toxic to animals and plants. This study investigated the interactions of Mo(VI) with iron oxyhydroxides during ferrihydrite bioreduction in the presence of the Fe(III)- reducing Geobacter sulfurreducens. Here, in this study, we showed that Mo concentration controlled ferrihydrite phase transformation, leading to Mo release. With the biotic reduction of ferrihydrite and Fe(II) production, Mo(VI) reduction and Mo(IV)O 2 formation were observed for the first time, which further immobilised Mo after surface adsorption of Mo(VI). At low Mo levels (Mo/Fe molar ratios of 1-2 %), sufficient Fe(II) adsorption onto ferrihydrite resulted in its transformation into magnetite nanoparticles (>80%, ~25 nm) which catalysed the reduction of Mo(VI) to form Mo(IV)O 2 and immobilised Mo. Contrastingly, at high Mo concentrations (Mo/Fe molar ratios of 5-10%), Mo(VI)O 4 2- adsorption onto ferrihydrite limited Fe(II) adsorption, subsequently less magnetite (<8-12%) formed while more goethite (~30- 50%, width & length > 15 & 100 nm, respectively) and siderite (~20-30%, width & length > 100 & 200 nm, respectively) with larger particle sizes formed instead, causing Mo(VI) release due to lower Mo adsorption. This study provides a comprehensive understanding of the interaction mechanisms among Geobacter sulfurreducens, Mo(VI), and iron oxyhydroxides, enabling predictions and controls of long-term Mo mobility and Fe mineral transformation under a variety of biogeochemical scenarios.

Geobacter sulfurreducens↗
DOE OSTI2021

Fine Aerosol Acidity and Water during Summer in the Eastern North Atlantic

Aerosol pH governs many important atmospheric processes that occur in the marine boundary layer, including regulating halogen and sulfur chemistries, and nutrient fertilization of surface ocean waters. In this study, we investigated the acidity of PM1 over the eastern North Atlantic during the Aerosol and Cloud Experiments in Eastern North Atlantic (ACE-ENA) aircraft campaign. The ISORROPIA-II thermodynamic model was used to predict PM1 pH and water. We first investigated the sensitivities of PM1 pH and water predictions to gas-phase NH3 and HNO3 concentrations. Our sensitivity analysis indicated that even though NH3 and HNO3 were present at very low concentrations in the eastern North Atlantic during the campaign, PM1 pH calculations can still be sensitive to NH3 concentrations. Specifically, NH3 was needed to constrain the pH of populations of PM1 that had low mass concentrations of NH4+ and non-volatile cations (NVCs). We next assumed that gas-phase NH3 and HNO3 concentrations during the campaign were 0.15 and 0.09 µg m−3, respectively, based on previous measurements conducted in the eastern North Atlantic. Using the assumption that PM1 were internally mixed (i.e., bulk PM1), we determined that PM1 pH ranged from 0.3–8.6, with a mean pH of 5.0 ± 2.3. The pH depended on both Hair+ and Wi. Hair+ was controlled primarily by the NVCs/SO42− molar ratio, while Wi was controlled by the SO42− mass concentration and RH. Changes in pH with altitude were driven primarily by changes in SO42−. Since aerosols in marine atmospheres are rarely internally mixed, the scenario where non-sea salt species and sea-salt species were present in two separate aerosol modes in the PM1 (i.e., completely externally mixed) was also considered. Smaller pH values were predicted for the aerosol mode comprised only of non-sea salt species compared to the bulk PM1 (difference of around 1 unit on average). This was due to the exclusion of sea-salt species (especially hygroscopic alkaline NVCs) in this aerosol mode, which led to increases in Hair+ values and decreases in Wi values. This result demonstrated that assumptions of aerosol mixing states can impact aerosol pH predictions substantially, which will have important implications for evaluating the nature and magnitude of pH-dependent atmospheric processes that occur in the marine boundary layer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Cooperative Effects Associated with High Electrolyte Concentrations in Driving the Conversion of CO2 to C2H4 on Copper

Compared to a conventional electrolyte concentration of 1 M HCOOK, the use of a highly concentrated 7.1 M HCOOK electrolyte increases the Faradaic efficiency (FE) ratio of C2H4/CO from 2.2 +- 0.3 to 18.3 +- 4.8 at -1.08 V vs. reversible hydrogen electrode (RHE) on a Cu gas-diffusion electrode. Based on electrochemical analysis and ab initio molecular dynamics (AIMD) simulation, the identity and concentration of the cation and anion play more important roles in controlling the CO2R reaction pathway than the bulk CO2 solubility and the bulk pH of electrolytes. In situ attenuated reflectance surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) suggests that, unlike 1 M HCOOK, the *CO-bridge-binding mode on Cu is dominant in 7.1 M HCOOK electrolyte, which potentially results in less CO release and higher yield of C2H4. This study demonstrates that although we can tailor the electrolyte composition to shift product selectivity, the factors that control the product selectivity are numerous and cannot be distilled down into one correlated property-reactivity relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Systematic Investigation of the Effects of Standard-Sample Concentration Mismatch during Fe Isotope Measurement by MC-ICP-MS

Advances in multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS) have led to the widespread use of iron (Fe) isotopes to elucidate the (bio)geochemical history of a range of environments. To generate Fe isotope ratio measurements, standard-sample bracketing (SSB) is commonly used to correct for instrumental mass bias inherent to MC-ICP-MS. However, SSB is only accurate when sample and isotope standard Fe concentrations match, in addition to the bulk solution matrix. When the Fe concentrations differ, Fe isotope ratio measurement results may be inaccurate, a phenomenon known as the "self-induced matrix effect." Here, this study systematically characterised the self-induced matrix effect for dry plasma Fe isotope ratio measurements on three MC-ICP-MS instruments and three introduction systems. Our extensive dataset indicates that: (1) the degree of mass bias is consistent regardless of MC-ICP-MS front-end design, (2) the degree of mass bias becomes less reproducible as the concentration difference between the sample and bracketing standard increases, and (3) this applies to both pure Fe solutions and solutions from geological materials. This study reinforces the requirement to match bracketing standard and sample concentrations within 10% and provides a correction method for that fall beyond the recommended concentration range to subsequently allow for proper concentration matching during SSB.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effective Corrosion-Resistant Single-Atom Alloy Catalyst on HfO 2 -Passivated BiVO 4 Photoanode for Durable (≈800 h) Solar Water Oxidation

Green hydrogen (H 2 ) production from solar water splitting necessitates photoelectrodes with superior photoelectrochemical (PEC) activity and durability. However, surface defects and photocorrosion instability—especially at high potentials—limit PEC performance and stability. Herein, the prototypical bismuth vanadate (BiVO 4 ) photoanode is used to demonstrate a holistic approach to improve photocurrent density and long-term stability. In this approach, high surface-area nanostructuring of BiVO 4 is combined with barium (Ba) doping with semi-crystalline hafnium oxide (HfO 2 ) surface passivation and single-atom nickel platinum (NiPt) catalysts. The introduction of Ba 2+ ions into BiVO 4 increases the concentration of conductive V 4+ ions or the ratio of V 4+ ions to oxygen vacancies, avoiding V 5+ dissolution during water oxidation. The semi-crystalline HfO 2 , which serves as a passivation layer, prevents BiVO 4 photocorrosion by suppressing harmful chemical reactions when holes are transferred to the electrolyte. The synergistic use of isolated single-atom and Ni-Pt coordination improves charge transfer at the photoanode/electrolyte interface, leading to enhanced PEC kinetics and stability. As a result, a photoelectrode is demonstrated with ≈6.5 mA cm -2 at 1.23 V versus a reversible hydrogen electrode (RHE) and continuous operation for 800 h with a negligible degradation rate. This work provides a promising approach to improve photoanodes for PEC H 2 production.

08 HYDROGEN↗
DOE OSTI2023

Nanostructure Scaling in Semi-Dilute Triblock Copolymer Gels

Here, there is a considerable body of work that describes the scaling of diblock copolymer micelle dimensions in dilute and semi-dilute solution based upon block degrees of polymerization and copolymer concentration. However, there is a lack of analogous information for semi-dilute ABA triblock copolymer gels, which consist of ABA triblock copolymer dissolved in midblock-selective (B-selective) solvent. The present study uses small angle X-ray scattering to extract micelle dimensions for numerous triblock copolymer gels that vary in copolymer identity (and hence block lengths) and copolymer concentration, as well as gels that contain various ratios of two unique triblock copolymers. Analysis of micelle structural data subsequently translates to universal scaling expressions for the micelle core radius – r A ≈ N A 0.53 N B -0.14 $\phi$ ABA 0.16 where N A and N B are the endblock and midblock degrees of polymerization, respectively, and $\phi$ ABA is the volume fraction of triblock copolymer in the gel – and for the intermicelle spacing – l AA ≈ N A 0.09 N B 0.29 $\phi$ ABA -0.35 . Each scaling expression describes the full collection of experimental data very well. Additionally, these scaling expressions are partially in line with expectations from semi-dilute diblock copolymer solution theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Using groundwater noble gas measurements to confirm paleorecharge hypotheses at Pahute Mesa, Nevada National Security Site, Nevada, USA

Pahute Mesa (Nevada, USA) was the site of 85 underground nuclear tests between 1965 and 1992 whose residual radio-chemical inventory poses a contaminant threat to local groundwater resources. To assess the fate and transport of these radionuclides in groundwater, several geochemical studies, including this one, have been conducted to understand long-term groundwater flow patterns at, and downgradient of, Pahute Mesa. Groundwater samples from the Pahute Mesa area at the Nevada National Security Site were analyzed for noble gases ( 3 He/ 4 He isotopic ratio and He, Ne, Kr, Ar and Xe concentrations) to infer groundwater recharge temperatures and provide additional evidence in support of groundwater flow patterns and the presence of late-pluvial Pleistocene groundwater. These data confirm recent findings (based on groundwater geochemistry and isotope compositions) that most recharge in the area occurred under temperature conditions much cooler than are found today, except near major drainages where ephemeral run of continues to recharge shallow groundwater. These noble gas data indicate that noble gas recharge temperatures and terrigenic He components have been reset where groundwater has flowed upward over barriers formed by caldera margins, or near the regional discharge area (Oasis Valley) where shallow groundwater has interacted with shallow soil gas. This evidence from groundwater noble gas measurements, in combination with other isotopic and geochemical studies, supports the current understanding of the unusual hydrogeology and recharge history of Pahute Mesa.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Experimental study of mechanistic factors influencing solvent-driven fractional crystallization of calcium sulfate

To advance dimethyl ether-driven fractional crystallization (DME-FC), a more sustainable method of water treatment and mineral recovery, a range of chemical equilibria were measured. These include varying concentrations of miscible organic solvents (MOS) used to experimentally measure the solvent-induced solid-liquid equilibrium (SLE) of calcium sulfate (CaSO 4 ) in water. Seven MOS, including dimethyl ether (DME), acetonitrile (MeCN), 1,4-dioxane, tetrahydrofuran (THF), acetone, ethanol, and diethylamine, were screened to establish trends associated with molecular volume, functional groups, and physical properties. The effect of MOS on CaSO 4 removal differed at concentrations <0.15 mol fraction MOS; MOS with greater molecular volume (THF, 1,4-dioxane, and diethylamine) induced greater CaSO 4 precipitation on a per mole basis. The solvent-induced SLE for all MOS converged between 0.15 and 0.2 mol fraction MOS, reaching a CaSO 4 concentration consistent with a water to MOS hydration ratio of 5:1 to 6:1, which may correspond to the solvent generating a solution-based pseudo-clathrate structure with continuity within the solution. Finally, solution pseudo-clathrate structures provide a mechanistic basis for DME-FC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Vacuum-ultraviolet absorption cross-sections of functionalized four-carbon species

Absorption cross-sections were measured in the vacuum ultraviolet from 5.17 – 9.92 eV using differential absorption spectroscopy for 33 four-carbon species: n-butane, trans-2-butene, cis-2-butene, butanal, butyric acid, ethyloxirane, trans-2,3-dimethyloxirane, cis-2,3-dimethyloxirane, 2-methyloxetane, 2,2'-bioxirane, vinyl oxirane, 3,4-epoxybutan-2-one, diacetyl, diethyl ether, ethyl vinyl ether, vinyl acetate, acetic anhydride, 1-butanol, 3-buten-1-ol, 1–hydroxy-butan-2-one, 1–hydroxy-butan-3-one, 2,3-epoxybutan-1-ol, 3,4-epoxybutan-1-ol, 2-oxetanemethanol, butanone, methyl vinyl ketone, 4H-1,3-dioxine, allyl formate, 2-oxobutanal, 4-hydroxybutanal, 2-methyloxetan-3-one, cis–but-2-en-1-ol, and trans-2–but-enal. Uncertainties were quantified in all cases by accounting for errors in gas-phase concentration, experimental repeatability, and signal-to-noise ratio as a function of photon energy. With the exception of 2-oxobutanal, which is reported with an uncertainty of 10%, convolving the sources of error using the root-sum-square method led to an upper limit of 5% uncertainty above the detection limit, which is largely attributable to chemical purity. Here, the primary objective of the present work is to provide absolute cross-sections along with quantified uncertainty limits. The majority of the absorption spectra, which reflect electronic transitions such as σ → σ* and n → σ*, are reported for the first time and provide insight into fundamental chemical physics, such as vibrational band structure and Rydberg transitions. The quantitative spectra in the present work facilitates the discovery of chemical intermediates that support improvement in the accuracy of computational models for low-temperature combustion and atmospheric chemistry.

biofuels↗
DOE OSTI2021

Extraction and separation of iridium(Ⅳ) and rhodium(Ⅲ) from hydrochloric acid media by a quaternary ammonium-based hydrophobic eutectic solvent

We report the extraction and separation of iridium(IV) and rhodium(III) from hydrochloric acid solutions by a hydrophobic eutectic solvent composed of tetraheptylammonium chloride and decanoic acid have been studied for the first time. This eutectic solvent selectively extracts iridium(IV) over rhodium(III), the highest separation factor obtained is approximately 20. The effects of the main experimental factors (shaking time, the volume ratio of aqueous to organic phase, hydrochloric acid concentration, and the initial metal concentration in the aqueous phase) on the extraction behavior of iridium(IV) and rhodium(III) have been investigated. Ultraviolet–visible (UV–Vis) spectroscopy was applied to reveal the [IrCl 6 ] 2- complex to be a predominant species attributed to iridium(IV) extraction. To understand the underlying extraction mechanism, the initial iridium(IV) concentration in the aqueous phase has been varied and a corresponding mathematical model has been developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗