Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conservation of mass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

The bond energy of UN + : Guided ion beam studies of the reactions of U + with N 2 and NO

In this work, a guided ion beam tandem mass spectrometer was used to study the reactions of U + with N 2 and NO. Reaction cross sections were measured over a wide range of energy for both systems. In each reaction, UN + is formed by an endothermic process, thereby enabling the direct measurement of the threshold energy and determination of the UN + bond dissociation energy. For the reaction of U + + N 2 , a threshold energy (E 0 ) of 4.02 ± 0.11 eV was measured, leading to D 0 (UN + ) = 5.73 ± 0.11 eV. The reaction of U + + NO yields UO + through an exothermic, barrierless process that proceeds with 94 ± 23% efficiency at the lowest energy. Analysis of the endothermic UN + cross section in this reaction provides E 0 = 0.72 ± 0.11 eV and, therefore, D 0 (UN + ) = 5.78 ± 0.11 eV. Averaging the values obtained from both reactions, we report D 0 (UN + ) = 5.76 ± 0.13 eV as our best value (uncertainty of two standard deviations). Combined with precise literature values for the ionization energies of U and UN, we also derive D 0 (UN) = 5.86 ± 0.13 eV. Both bond dissociation energies agree well with high-level theoretical treatments in the literature. The formation of UN + in reaction of U + with NO also exhibits a considerable increase in reaction probability above ~3 eV. Theory suggests that this may be consistent with the formation of UN + in excited quintet spin states, which we hypothesize are dynamically favored because the number of 5f electrons in reactants and products is conserved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance evaluation of an air conditioning system based on quasi isothermal dehumidifcation

This work presents a first study of novel air conditioning system based on quasi isothermal dehumidification combined with dew-point evaporative cooling through the Maisotsenko cycle (M-Cycle). The dehumidification process is realized in desiccant coated heat exchanger with heat rejection system. The key idea behind the solution is to maximize the cooling effectiveness by creating favourable conditions for dehumidification and evaporative cooling process. This is achieved by rejecting the heat of sorption in the desiccant system and providing cold and dry air for M-Cycle air cooler, which allows the system to be powered by using low-grade heat energy at 50 °C. The analysis is performed on the basis of experimentally validated numerical models of each component combined in a unified model of the system. The goal of the study is to determine the performance of the solution under different operational conditions. In addition two types of M-Cycle air coolers (i.e. cross-flow and regenerative unit) are compared to establish which unit is more suitable as the source of cooling energy for the system. It was established that proposed system is able to provide comfortable room parameters (supply air temperature equal 17 °C and humidity ratio equal 0.010 kg/kg-da) for outdoor air temperatures ranging from 28 to 36 °C and outdoor air humidity ranging from 0.010 to 0.018 kg/kg-da. This means that the proposed solution is able to provide comfortable conditions in temperate and humid climates. Results also indicate that the system consisting of the regenerative M-Cycle HMX allows better cooling load management, offers higher thermal Coefficient of Performance (COP th ) and uses less water compared to the system with the cross-flow HMX. However, the system with cross-flow heat and mass exchanger (HMX) has a relatively greater electrical Coefficient of Performance (COP el ) in most cases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Astrophysical Equation-of-State Constraints on the Color-Superconducting Gap

We demonstrate that astrophysical constraints on the dense-matter equation of state place an upper bound on the color-superconducting gap in dense matter above the transition from nuclear matter to quark matter. Pairing effects in the color-flavor locked quark matter phase increase the pressure at high density, and if this effect is sufficiently large then the requirements of causality and mechanical stability make it impossible to reach such a pressure in a way that is consistent with what is known at lower densities. The intermediate-density equation of state is inferred by considering extensions of chiral effective field theory to neutron star densities, and conditioning these using current astrophysical observations of neutron star radius, maximum mass, and tidal deformability (PSR J⁢0348+0432, PSR J1624-2230, PSR J⁢0740+6620, GW170817). At baryon number chemical potential μ = 2.6 GeV we find a 95% upper limit on the color-flavor locked pairing gap Δ of 457 MeV using overly conservative assumptions and 216 MeV with more reasonable assumptions. Furthermore, this constraint may be strengthened by future astrophysical measurements as well as by future advances in high-density QCD calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon intensity of mass timber materials: impacts of sourcing and transportation

Mass timber construction is widely considered a promising alternative construction method to reduce buildings’ total life-cycle carbon emissions because wood is a carbon sink. Cross-laminated timber (CLT) panels, manufactured by gluing lumber layers with grains at right angles, are potential low-carbon alternatives to carbon-intensive concrete and steel construction. However, most environmental impact assessment studies do not consider variation in transportation impacts within the CLT supply chain when calculating life-cycle impacts. This study investigates the embodied primary energy and the global warming potential (GWP) of CLT supply chain decisions regarding the type of timber species used, the U.S. region it is sourced from, and the location of the CLT mill. Longer transport distances in the supply chain for timber and CLT panels can contribute as much as 923 MJ/m 2 (20%) of the embodied primary energy of a CLT building, and the use of a higher-density timber species increases this contribution to 1246 MJ/m 2 (24%), with most of that energy derived from fossil energy sources. For perspective, the GWP of a building whose CLT panels and timber have been transported by truck over 6,000 km (252–270 kgCO 2 /m 2 ) is greater than the GWP of an equivalent reinforced concrete (RC) building (245 kgCO 2 /m 2 ). Thus, factors like the location of CLT processing facilities and the type of timber species can significantly impact the overall life-cycle assessment and, if chosen appropriately, can mitigate the environmental impacts of CLT construction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Evaluation of the Passive Cooling Potential of Thermal Mass Inherent in Medium to Large Commercial Buildings

Typical commercial construction inherently contains large surface areas of relatively thin mass located in the floor slabs. This research asks how effective this mass could be for passive cooling, relative to other mass depths, if it were to be exposed and used as thermal mass. Although much of the rich literature on thermal mass has been conducted with far greater mass depths, a more limited amount of research suggests that because the surface heat transfer rate is limited, the focus should be on the surface area of exposed mass, not its depth. This presents an opportunity for more buildings to behave more thermally massively, if the mass inherent in typical floor slabs contains utility, particularly over diurnal cycles. In all climates analyzed, it was found that there is a pronounced shoulder where energy savings from passive cooling of increasing mass depths was steep until roughly 7.5–10 cm, and beyond this point the achieved energy savings diminished rapidly. When considering the embodied energy of concrete, the incremental benefit of added mass beyond a typical topping slab of 10 cm does not justify the incremental embodied energy cost from a total energy standpoint alone.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Formation and Redshift Evolution of Dark Matter Spikes

Dark matter density spikes forming around adiabatically growing black holes can dramatically enhance indirect and direct detection signals. Canonical predictions, however, assume a zero-mass seed in a purely dark matter environment and do not track the long-term dynamical impact of surrounding stars. We present a semi-analytic framework that first generalizes adiabatic spike formation to include finite seed masses, stellar cusps, and non-circular orbits, and then studies the subsequent cosmic evolution by solving coupled Fokker-Planck equations for the dark matter and stellar phase-space distributions, with a heating rate modulated by the cosmic star formation rate. Starting conservatively from canonical Gondolo-Silk spikes and marginalizing over astrophysical uncertainties, we find that stellar gravitational heating drives the inner slope towards $γ_χ\simeq 1.5$ within a few Gyrs (e.g by $z \lesssim 2$ for spikes formed at $z\simeq 10$), yielding overdensities two to four orders of magnitude below canonical expectations but still well above an NFW-like cusp. We provide redshift-dependent benchmarks for the column density and $J$-factor relevant to scattering, decay and annihilation signatures. Any robust interpretation of indirect dark matter signals from galactic nuclei must account for this evolution.

Herrera, Gonzalo [MIT, LNS; MIT, MKI; Harvard U.]↗

An examination of the metal ion content in the active sites of human endonucleases CPSF73 and INTS11

Human cleavage and polyadenylation specificity factor (CPSF)73 (also known as CPSF3) is the endoribonuclease that catalyzes the cleavage reaction for the 3'-end processing of pre-mRNAs. The active site of CPSF73 is located at the interface between a metallo-β-lactamase domain and a β-CASP domain. Two metal ions are coordinated by conserved residues, five His and two Asp, in the active site, and they are critical for the nuclease reaction. The metal ions have long been thought to be zinc ions, but their exact identity has not been examined. Here we present evidence from inductively coupled plasma mass spectrometry and X-ray diffraction analyses that a mixture of metal ions, including Fe, Zn, and Mn, is present in the active site of CPSF73. The abundance of the various metal ions is different in samples prepared from different expression hosts. Zinc is present at less than 20% abundance in a sample expressed in insect cells, but the sample is active in cleaving a pre-mRNA substrate in a reconstituted canonical 3'-end processing machinery. Zinc is present at 75% abundance in a sample expressed in human cells, which has comparable endonuclease activity. We also observe a mixture of metal ions in the active site of the CPSF73 homolog INTS11, the endonuclease for Integrator. Taken together, our results provide further insights into the role of metal ions in the activity of CPSF73 and INTS11 for RNA 3'-end processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of sizeable ω contribution to χ c 1 ( 3872 ) → π + π - J / ψ decays

Resonant structures in the dipion mass spectrum from $χ$ c1 (3872) → π + π - J/ψ decays, produced via B + → K + $χ$ c1 (3872) decays, are analyzed using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9 fb -1 . A sizeable contribution from the isospin conserving $χ$ c1 (3872) → ωJ/ψ decay is established for the first time, (21.4 ± 2.3 ± 2.0)%, with a significance of more than 7.1σ. The amplitude of isospin violating decay, $χ$ c1 (3872) → ρ 0 J/ψ, relative to isospin conserving decay, $χ$ c1 (3872) → ωJ/ψ, is properly determined, and it is a factor of 6 larger than expected for a pure charmonium state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements and computational analysis of the natural decay of 176 Lu

Background: Mainly because of its long half-life and despite its scientific relevance, spectroscopic measurements of 176 Lu forbidden β decays are very limited and lack formulation of shape factors. A direct precise measurement of its Q value is also presently unreported. In addition, the description of forbidden decays provides interesting challenges for nuclear theory. The comparison of precise experimental results with theoretical calculations for these decays can help to test underlying models and can aid the interpretation of data from other experiments. Purpose: Perform the first precision measurements of 176 Lu β-decay spectra and attempt the observation of its electron capture decays, as well as perform the first precision direct measurement of the 176 Lu β-decay Q value. Compare the shape of the precisely determined experimental β spectra to theoretical calculations, and compare the end point energy to that obtained from an independent Q value measurement. Method: Here, the 176 Lu β-decay spectra measurements and the search for electron capture decays were performed with an experimental setup that employed lutetium-containing scintillator crystals and a NaI(Tl) spectrometer for coincidence counting. The β decay Q value was determined via high-precision Penning trap mass spectrometry (PTMS) with the LEBIT facility at the National Superconducting Cyclotron Laboratory. The β-spectrum calculations were performed within the Fermi theory formalism with nuclear structure effects calculated using a shell model approach. Results: Both β transitions of 176 Lu were experimentally observed and corresponding shape factors formulated in their entire energy ranges. The search for electron capture decay branches led to an experimental upper limit of 6.3×10 –6 relative to its β decays. The 176 Lu β-decay and electron capture Q values were measured using PTMS to be 1193.0(6) and 108.9(8) keV, respectively. This enabled precise β end point energies of 596.2(6) and 195.3(6) keV to be determined for the primary and secondary β decays, respectively. The conserved vector current hypothesis was applied to calculate the relativistic vector matrix elements. The β-spectrum shape was shown to significantly depend on the Coulomb displacement energy and on the value of the axial vector coupling constant gA, which was extracted according to different assumptions. Conclusion: The implemented self-scintillation method has provided unmatched observations of 176 Lu, independently validated by the first direct measurements of its β-decay Q value by Penning trap mass spectrometry. Theoretical study of the main β transition led to the extraction of very different effective gA and log10f values, showing that a high-precision description of this transition would require a realistic nuclear structure with nucleus deformation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Closing in on critical net-baryon fluctuations at LHC energies: Cumulants up to third order in Pb–Pb collisions

Fluctuation measurements are important sources of information on the mechanism of particle production at LHC energies. This article reports the first experimental results on third-order cumulants of the net-proton distributions in Pb–Pb collisions at a center-of-mass energy $\sqrt{s_{NN}}$ = 5.02 TeV recorded by the ALICE detector. The results on the second-order cumulants of net-proton distributions at $\sqrt{s_{NN}}$ = 2.76 and 5.02 TeV are also discussed in view of effects due to the global and local baryon number conservation. The results demonstrate the presence of long-range rapidity correlations between protons and antiprotons. Such correlations originate from the early phase of the collision. The experimental results are compared with HIJING and EPOS model calculations, and the dependence of the fluctuation measurements on the phase-space coverage is examined in the context of lattice quantum chromodynamics (LQCD) and hadron resonance gas (HRG) model estimations. The measured third-order cumulants are consistent with zero within experimental uncertainties of about 4% and are described well by LQCD and HRG predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Metabolic modulation: Pneumocystis phosphoglucomutase is a target influencing host recognition

Herein, this manuscript explores the significance of the phosphoglucomutase (PGM) enzyme in Pneumocystis spp., focusing on its role in fungal surface mannoprotein formation. Through expression of the Pneumocystis murina Pmpgm2 in a Saccharomyces cerevisiae pgm2Δ strain, we demonstrate restoration of binding to the mannose receptor (MR) and macrophages to wildtype yeast levels in this complemented strain. Gas Chromatography-Mass Spectroscopy (GC-MS) confirmed reduced mannose content in the pgm2Δ yeast strain compared to the wild-type and complemented Pmpgm2 cDNA-expressing strains. This study underscores fungal PGM function in dolichol glucosyl phosphate biosynthesis, crucial for proper cell wall mannoprotein formation. Furthermore, highlighting the conservation of targetable cysteine residues across fungal pathogens, PGM inhibition maybe a potential therapeutic strategy against a broad spectrum of fungal infections.

59 BASIC BIOLOGICAL SCIENCES↗

Classical-quantum scattering

We analyze the framework recently proposed by Oppenheim et al (2023 Nat. Commun. 14; 2023 Phys. Rev. X 13 041040; arXiv:2302.07283 [gr-qc]; 2023 J. High Energy Phys. JHEP08(2023)163) to model relativistic quantum fields coupled to relativistic, classical, stochastic fields (in particular, as a model of quantum matter coupled to ‘classical gravity’). Perhaps surprisingly, we find that we can define and calculate scattering probabilities which are Lorentz-covariant and conserve total probability, at least at tree level. As a concrete example, we analyze 2→2 scattering of quantum matter mediated by a classical Yukawa field. Mapping this to a gravitational coupling in the non-relativistic limit, and assuming that we can treat large objects as point masses, we find that the simplest possible ‘classical-quantum’ gravity theory constructed this way gives predictions for 2→2 gravitational scattering which are inconsistent with simple observations of, e.g. spacecraft undergoing slingshot maneuvers. We comment on lessons learned for attempts to couple quantum matter to ‘non-quantum’ gravity, or more generally, for attempts to couple relativistic quantum and classical systems.

Carney, Daniel↗

Novel constraints on fifth forces and ultralight dark sector with asteroidal data

Here, we study for the first time the possibility of probing long-range fifth forces utilizing asteroid astrometric data, via the fifth force-induced orbital precession. We examine nine Near-Earth Object (NEO) asteroids whose orbital trajectories are accurately determined via optical and radar astrometry. Focusing on a Yukawa-type potential mediated by a new gauge field (dark photon) or a baryon-coupled scalar, we estimate the sensitivity reach for the fifth force coupling strength and mediator mass in the mass range m ≃ (10 -21 -10 -15 ) eV, near the "fuzzy" dark matter region. Our estimated sensitivity is comparable to leading limits from equivalence principle tests, potentially exceeding these in a specific mass range. The fifth force-induced precession increases with the orbital semi-major axis in the small m limit, motivating the study of objects further away from the Sun. We also demonstrate that precession tests are particularly strong in probing long-range forces which approximately conserve the equivalence principle. We discuss future prospects for extending our study to more than a million asteroids, including NEOs, main-belt asteroids, Hildas, and Jupiter Trojans, as well as trans-Neptunian objects and exoplanets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dark Photon Oscillations in Our Inhomogeneous Universe

A dark photon kinetically mixing with the ordinary photon represents one of the simplest viable extensions to the standard model, and would induce oscillations with observable imprints on cosmology. Oscillations are resonantly enhanced if the dark photon mass equals the ordinary photon plasma mass, which tracks the free electron number density. Previous studies have assumed a homogeneous Universe; in this Letter, we introduce for the first time an analytic formalism for treating resonant oscillations in the presence of inhomogeneities of the photon plasma mass. We apply our formalism to determine constraints from cosmic microwave background photons oscillating into dark photons, and from heating of the primordial plasma due to dark photon dark matter converting into low-energy photons. Including the effect of inhomogeneities demonstrates that prior homogeneous constraints are not conservative, and simultaneously extends current experimental limits into a vast new parameter space.

79 ASTRONOMY AND ASTROPHYSICS↗

Benchmark Model for Wastewater Treatment Using an Activated Sludge Process

This is benchmark model for wastewater treatment using an activated sludge process. The activated sludge process is a means of treating both municipal and industrial wastewater. The activated sludge process is a multi-chamber reactor unit that uses highly concentrated microorganisms to degrade organics and remove nutrients from wastewater, producing quality effluent. This model provides pollutant concentrations, mass balance, electricity requirements, and treatment costs. This model will be continuously updated based on the latest data.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Double-copy towards supergravity inflation with α-attractor models

A bstract Key to the simplicity of supergravity α -attractor models of inflation are Volkov-Akulov fermions, often in the form of nilpotent superfields. Here we explore the possibility of using the double-copy to construct theories of Dirac-Born-Infeld-Volkov-Akulov (DBIVA) coupled to supergravity. A color-dual bootstrap admits scattering amplitudes involving pions and vectors through five-point tree-level order by order in mass-dimension, but requires the introduction of a Tr( F 3 ) operator. Gauge theories with this operator were recently found to require a tower of higher-derivative operators to be compatible with the duality between color and kinematics. Adjoint-type double-copy construction at its most conservative seems to require the UV completion of DBIVA + pure Poincaré supergravity scattering amplitudes to a family of theories involving DBIVA-like particles coupled to Weyl-Einstein supergravity. We also point out an alternative solution to color-dual gauged pions that allows adjoint double-copy without a tower of higher derivative corrections but at the cost of exchange symmetry between scalars.

Physics↗

Thermodynamic Analysis of Nano-Electrospray Induced Gas Jets

Nano-electrospray (nES) produces a plume of charged liquid droplets which have drag interactions with the surrounding gas after they are emitted from a source capillary. The resulting induced gas flow has often been considered unimportant, but we have demonstrated that a gas microjet of significant velocity up to 10s of m/s can be produced. In this work we present a thermodynamic framework that enables analysis of gas jet generation from electrosprays and introduce the important metrics for such analysis, effectiveness (a measure of momentum transfer from the electrosprayed aerosol to gas) and efficiency (a measure of energy conversion from electrical energy generating the electrospray to gas kinetic energy). This analytical framework is applicable to any two-phase flows consisting of discrete conservative-force-driven particles which exchange momentum with an inert, otherwise quiescent fluid medium to yield a co-flowing two-phase jet. Here, we apply this framework to sprays of water from nano-electrospray emitters to demonstrate that increasing the applied electrical potential difference, increasing liquid mass flowrate, and decreasing droplet size all can increase electrospray induced gas jet strength, but only the latter two do so while also increasing the momentum transfer effectiveness and energy conversion efficiency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Solar reduction of carbon dioxide on copper-tin electrocatalysts with energy conversion efficiency near 20%

Abstract Copper catalysts modified with tin have been demonstrated to be selective for the electroreduction of carbon dioxide to carbon monoxide. However, such catalysts require the precise control of tin loading amount. Here, we develop a copper/tin-oxide catalyst with dominant tin oxide surface being formed via a spontaneous exchange reaction between sputtered tin and copper oxide. Even though the surface of this catalyst is tin-rich, it achieves an excellent performance towards carbon monoxide production in a flow cell. This contrasts with copper/tin-oxide prepared via atomic layer deposition since it yields selectivity towards carbon monoxide only on a copper-rich surface. Mechanism studies reveal that the tin sites on the tin-rich copper/tin-oxide surface achieve a suitable binding with adsorbed carbon monoxide under the presence of copper. Powered by a triple-junction solar cell, the copper/tin-oxide based electrolyzer sets a new benchmark solar-to-chemical energy conversion efficiency of 19.9 percent with a Faradaic efficiency of 98.9 percent towards carbon monoxide under simulated standard air mass 1.5 global illumination.

14 SOLAR ENERGY↗