Search NASA⌕ Search

SEARCH · Search NASA

Results for “Control Points”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Algorithmic formulation of control problems in manipulation

The basic characteristics of manipulator control algorithms are discussed. The state of the art in the development of manipulator control algorithms is briefly reviewed. Different end-point control techniques are described together with control algorithms which operate on external sensor (imaging, proximity, tactile, and torque/force) signals in realtime. Manipulator control development at JPL is briefly described and illustrated with several figures. The JPL work pays special attention to the front or operator input end of the control algorithms.

Bejczy, A. K.↗
NASA NTRS1981

LSST control technology

The necessary controls technology required for precise attitude, shape, and pointing control of large space systems (LSS) is defined. The major controls tasks are summarized with emphasis on: (1) the selection of typical antenna and platform configurations, and the definition of models and performance requirements; (2) evaluating the applicability of state-of-the-art control techniques to the control of large antennas and platforms; and (3) identifying the need for and initiating the development of advanced control concepts required for LSS.

Tolivar, A. F.↗
NASA NTRS1982

LANDSAT Digital Data Base Preparation for the Pennsylvania Defoliation Application Pilot Test

A LANDSAT digital mosaic data base for the State of Pennsylvania was prepared for use in the development of an automated system to annually estimate the extent and severity of Gypsy Moth defoliation of hardward forests. The techniques for detecting the defoliation and development of a geographic information system (GIS) to assess damage is being developed jointly by NASA/Goddard Space Flight Center and Pennsylvania State University using the JPL prepared mosaic base. The JPL processing involved the use of ground control points from the Master Data Processor for planimetric control, resampling of the LANDSAT data to 57 x 57 meter pixels, realignment to north, and reprojection to the Universal Transverse Mercator (UTM) projection in UTM zones 17 and 18. The completed mosaic for each UTM zone was subdivided into 1 degree of latitude by 2 degrees of longitude quadrangles for easy data handling. Consideration is given to the issues of mapping standards, sensor and spacecraft platform characteristics, and their implication to geographic information systems operation. Methods for obtaining measures of accuracy for LANDSAT mosaics are reviewed.

Mcleod, R. G.↗
NASA NTRS1989

The effects of atmospheric turbulence on precision optical measurements used for antenna-pointing compensation

Blind pointing of the Deep Space Network (DSN) 70-meter antennas can be improved if distortions of the antenna structure caused by unpredictable environmental loads can be measured in real-time, and the resulting boresight shifts evaluated and incorporated into the pointing control loops. The measurement configuration of a proposed pointing compensation system includes an optical range sensor that measures distances to selected points on the antenna surface. The effect of atmospheric turbulence on the accuracy of optical distance measurements and a method to make in-situ determinations of turbulence-induced measurement errors are discussed.

Nerheim, N.↗
NASA NTRS1991

Adaptive Control Of Large Vibrating, Rotating Structures

Globally convergent theoretical method provides for adaptive set-point control of orientation of, along with suppression of the vibrations of, large structure. Method utilizes inherent passivity properties of structure to attain mathematical condition essential to adaptive convergence on commanded set point. Maintains stability and convergence in presence of errors in mathematical model of dynamics of structure and actuators. Developed for controlling attitudes of large, somewhat flexible spacecraft, also useful in such terrestrial applications as controlling movable bridges or suppressing earthquake vibrations in bridges, buildings, and other large structures.

Bayard, David S.↗
NASA NTRS1973

Use of ERTS data for a multidisciplinary analysis of Michigan resources

The author has identified the following significant results. A computerized procedure has been developed to correlate coordinates from topographic maps and/or aerial photographs with ERTS data coordinates. Application to data from other multispectral scanners is anticipated. In the procedure, a map transformation from earth coordinates to ERTS point and line numbers is calculated using selected ground control points and the method of least squares. The map transformation is then applied to the earth coordinates of selected areas to obtain the corresponding ERTS point and line numbers. An optional provision allows moving the boundaries of the plots inwards by variable distances (typically half a resolution element) so the selected pixels will not overlap adjacent features.

Anderson, A. L.↗
NASA NTRS1981

Feasibility study of the solar scientific instruments for Spacelab/Orbiter

The feasibility and economics of mounting and operating a set of solar scientific instruments in the backup Skylab Apollo Telescope Mount (ATM) hardware was evaluated. The instruments used as the study test payload and integrated into the ATM were: the Solar EUV Telescope/Spectrometer; the Solar Active Region Observing Telescope; and the Lyman Alpha White Light Coronagraph. The backup ATM hardware consists of a central cruciform structure, called the "SPAR', a "Sun End Canister' and a "Multiple Docking Adapter End Canister'. Basically, the ATM hardware and software provides a structural interface for the instruments; a closely controlled thermal environment; and a very accurate attitude and pointing control capability. The hardware is an identical set to the hardware that flow on Skylab.

Leritz, J.↗
NASA NTRS1978

Application of square-root filtering for spacecraft attitude control

Suitable digital algorithms are developed and tested for providing on-board precision attitude estimation and pointing control for potential use in the Landsat-D spacecraft. These algorithms provide pointing accuracy of better than 0.01 deg. To obtain necessary precision with efficient software, a six state-variable square-root Kalman filter combines two star tracker measurements to update attitude estimates obtained from processing three gyro outputs. The validity of the estimation and control algorithms are established, and the sensitivity of their performance to various error sources and software parameters are investigated by detailed digital simulation. Spacecraft computer memory, cycle time, and accuracy requirements are estimated.

Sorensen, J. A.↗
NASA NTRS1974

A computer simulation of Skylab dynamics and attitude control for performance verification and operational support

A simulation of the Skylab attitude and pointing control system (APCS) is outlined and discussed. Implementation is via a large hybrid computer and includes those factors affecting system momentum management, propellant consumption, and overall vehicle performance. The important features of the flight system are discussed; the mathematical models necessary for this treatment are outlined; and the decisions involved in implementation are discussed. A brief summary of the goals and capabilities of this tool is also included.

Buchanan, H.↗
NASA NTRS1974

Determination of selenographic coordinates of lunar surface points from single pictures obtained from Zond 6

Pictures of the lunar surface with an image of practically the entire lunar limb were obtained from the Zond 6 spacecraft. During the time of exposure, the entire lunar surface covered by these photographs was illuminated by the sun. Such single pictures were used to find the external orientation elements and selenographic coordinates of the photographed lunar surface points. The selenographic coordinate system was specified by the Goloseyev catalog and was realized by points of this catalog identified on the pictures and termed reference points. Craters located on the invisible side of the moon and also other points of the Goloseyev catalog, which could be used as control points, were taken as the points being determined. The technique used to compute the selenographic coordinates of the points is outlined.

Ziman, Y. L.↗
NASA NTRS1982

Atmospheric guidance techniques and performance

The Orbiter entry guidance system controls the Space Shuttle Orbiter from the initial atmospheric penetration point to the point at which an earth relative velocity of 2500 feet/second is reached. At the latter point, control of the Orbiter is transferred to the terminal area energy management system. The entry guidance system is based on the concept that the range to be flown during entry is a unique function of the drag deceleration profile flown throughout the entry. The range prediction during entry is based on analytic equations which are simple drag deceleration functions of earth relative velocity above Mach 10.5 and energy with respect to the earth below Mach 10.5. Flight through the entry corridor is accomplished by linking these simple drag deceleration functions together in series in order to define a drag deceleration reference profile. The results of the first three Space Shuttle missions have not only verified the entry guidance concept but have also demonstrated the stability of the guidance system.

Harpold, J. C.↗
NASA NTRS1986

Numerical pole assignment by eigenvalue Jacobian inversion

A numerical procedure for solving the linear pole placement problem is developed which operates by the inversion of an analytically determined eigenvalue Jacobian matrix. Attention is given to convergence characteristics and pathological situations. It is not concluded that the algorithm developed is suitable for computer-aided control system design with particular reference to the scan platform pointing control system for the Galileo spacecraft.

Sevaston, George E.↗
NASA NTRS1986

Performance characterization of the Hubble Space Telescope Rate Gyro Assembly

An account is given of the design features and performance characteristics of the Rate Gyro Assembly employed by the Hubble Space Telescope's Pointing Control System to effect accurate spacecraft maneuvers and support fine pointing telescope operation, in conjunction with the fine guidance sensors. The rate sensor attitude quantization is 0.00025 arcsec. Fine-pointing stability is the driver for gyro noise performance, while spacecraft-pointing accuracy requirements at the end of maneuvers has driven the gyro scale factor and mechanical alignment stability performance.

Dougherty, H.↗
NASA NTRS1990

Exponentially Stabilizing Robot Control Laws

New class of exponentially stabilizing laws for joint-level control of robotic manipulators introduced. In case of set-point control, approach offers simplicity of proportion/derivative control architecture. In case of tracking control, approach provides several important alternatives to completed-torque method, as far as computational requirements and convergence. New control laws modified in simple fashion to obtain asymptotically stable adaptive control, when robot model and/or payload mass properties unknown.

Wen, John T.↗
NASA NTRS1992

Force regulation in multiple-manipulator systems

A new intuitively appealing interpretation of the internal force in a multiple-arm system is presented. The static gravity-free case is considered where internal force has a well-founded physical meaning. The case is extended to the general dynamic case by removing the inertial force through balancing it with the minimum amount of contact force. The remaining component in the contact force is considered to be the sole contributor to the inertial force. Existing techniques for force control can be used to obtain various stabilizing force set point control laws. Particular attention is given to the motion control strategy for multiple arm systems. Three types of control laws, feedback linearization, arms-as-actuators, and passive control, are addressed. The first two techniques provide simplified control tuning but require much model information. The latter approach is considered to be very robust with respect to the model, but good transient performance is more challenging to obtain. It is suggested to combine one of the model-based approaches with the passive control approach.

Wen, John T.↗
NASA NTRS1987

An inexpensive S-band angle pointing technique for steering a narrow beam Ku-band antenna

A recently tested antenna pointing control system for gimbaled antennas has been developed. A modified TDRSS user transponder produces pointing error signals from the S-band forward link which in turn drive the Steering Control Electronics (SCE) to precision steer a S-/Ku-band Data and S-band Tracking (KDST) planar array. A successful test of the pointing and data handling capabilities is described and plans for further tests, incorporating additional refinements, are presented.

Line, Larry↗