Search NASA⌕ Search

SEARCH · Search NASA

Results for “DATA REDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Thermal mapping of the lunar surface

A program of lunar infrared radiometry which uses large area scanning is described, and procedures for atmospheric attenuation correction and data reduction to temperature by relative radiometry are outlined. Flow charts of the computer data reduction program are shown which contain the astrometric analysis from ephemeral data. The scan data, taken on 10 evenings in 1971 and 1972 in the 10 to 12 micron window, are presented as isothermal contour maps of the lunar disc. More than 160 areas of anomalous thermal emission were found in the lunar darkside data. Eclipse cooling curves, measured in the same wavelength band for 7 lunar regions during the eclipse of February 10, 1971, are also presented. Errors of the scan and eclipse data were calculated from accuracy estimates of the parameters.

Raine, W. L.↗
NASA NTRS1988

Data traffic reduction schemes for sparse Cholesky factorizations

Load distribution schemes are presented which minimize the total data traffic in the Cholesky factorization of dense and sparse, symmetric, positive definite matrices on multiprocessor systems with local and shared memory. The total data traffic in factoring an n x n sparse, symmetric, positive definite matrix representing an n-vertex regular 2-D grid graph using n (sup alpha), alpha is equal to or less than 1, processors are shown to be O(n(sup 1 + alpha/2)). It is O(n(sup 3/2)), when n (sup alpha), alpha is equal to or greater than 1, processors are used. Under the conditions of uniform load distribution, these results are shown to be asymptotically optimal. The schemes allow efficient use of up to O(n) processors before the total data traffic reaches the maximum value of O(n(sup 3/2)). The partitioning employed within the scheme, allows a better utilization of the data accessed from shared memory than those of previously published methods.

Naik, Vijay K.↗
NASA NTRS1974

Investigation of Structure-Property Relationships in Systematic Series of Novel Polymers

The results are discussed of the on-line interface of the Torsional Braid Analysis experiment to an Hierarchical Computer System for data acquisition, data reduction and control of experimental variables. Some experimental results are demonstrated and the data reduction procedures are outlined. Several modes of presentation of the final computer-reduced data are discussed in an attempt to elucidate possible interrelations between the thermal variation of the rigidity and loss parameters.

Gillham, J. K.↗
NASA NTRS1973

D-region blunt probe data analysis using hybrid computer techniques

The feasibility of performing data reduction techniques with a hybrid computer was studied. The data was obtained from the flight of a parachute born probe through the D-region of the ionosphere. A presentation of the theory of blunt probe operation is included with emphasis on the equations necessary to perform the analysis. This is followed by a discussion of computer program development. Included in this discussion is a comparison of computer and hand reduction results for the blunt probe launched on 31 January 1972. The comparison showed that it was both feasible and desirable to use the computer for data reduction. The results of computer data reduction performed on flight data acquired from five blunt probes are also presented.

Burkhard, W. J.↗
DOE OSTI2026

Data Release 1 of the Dark Energy Spectroscopic Instrument

In 2021 May the Dark Energy Spectroscopic Instrument (DESI) collaboration began a 5 yr spectroscopic redshift survey to produce a detailed map of the evolving three-dimensional structure of the Universe between z = 0 and z ≈ 4. DESI’s principal scientific objectives are to place precise constraints on the equation of state of dark energy, the gravitationally driven growth of large-scale structure, and the sum of the neutrino masses, and to explore the observational signatures of primordial inflation. We present DESI DR1, which consists of all data acquired during the first 13 months of the DESI main survey, as well as a uniform reprocessing of the DESI Survey Validation data, which were previously made public in the DESI Early Data Release. The DR1 main survey includes high-confidence redshifts for 18.7M objects, of which 13.1M are spectroscopically classified as galaxies, 1.6M as quasars, and 4M as stars, making DR1 the largest sample of extragalactic redshifts ever assembled. We summarize the DR1 observations, the spectroscopic data-reduction pipeline and data products, large-scale structure catalogs, value-added catalogs, and describe how to access and interact with the data. In addition to fulfilling its core cosmological objectives with unprecedented precision, we expect DR1 to enable a wide range of transformational astrophysical studies and discoveries.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1977

Mechanical properties of ion-beam-textured surgical implant alloys

An electron-bombardment Hg ion thruster was used as an ion source to texture surfaces of materials used to make orthopedic and/or dental prostheses or implants. The materials textured include 316 stainless steel, titanium-6% aluminum, 4% vanadium, and cobalt-20% chromium, 15% tungsten. To determine the effect of ion texturing on the ultimate strength and yield strength, stainless steel and Co-Cr-W alloy samples were tensile tested to failure. Three types of samples of both materials were tested. One type was ion-textured (the process also heats each sample to 300 C), another type was simply heated to 300 C in an oven, and the third type was untreated. Stress-strain diagrams, 0.2% offset yield strength data, total elongation data, and area reduction data are presented. Fatigue specimens of ion textured and untextured 316 stainless steel and Ti-6% Al-4% V were tested. Included as an ion textured sample is a Ti-6% Al-4% V sample which was ion machined by means of Ni screen mask so as to produce an array of 140 mu m x 140 mu m x 60 mu m deep pits. Scanning electron microscopy was used to characterize the ion textured surfaces.

Weigand, A. J.↗
NASA NTRS1978

Test data report, low speed wind tunnel tests of a full scale lift/cruise-fan inlet, with engine, at high angles of attack

A low speed wind tunnel test of a fixed lip inlet with engine, was performed. The inlet was close coupled to a Hamilton Standard 1.4 meter, variable pitch fan driven by a lycoming T55-L-11A engine. Tests were conducted with various combinations of inlet angle of attack freestream velocities, and fan airflows. Data were recorded to define the inlet airflow separation boundaries, performance characteristics, and fan blade stresses. The test model, installation, instrumentation, test, data reduction and final data are described.

Shain, W. M.↗
NASA NTRS1980

Computer program documentation D1FLTD to drive SINDA boundary nodes: User's guide

The thermal model correlation process begins when measured thermocouple data is available from the orbital flight tests of the shuttle. For this effort, it is necessary to convert some of the system improved numerical differencing analyzer (SINDA) diffusion or arithmetic nodes to boundary nodes and then drive these boundary nodes to the temperature profile of a flight measurement. An efficient way to provide this capability within the SINDA and OFT software systems is to provide a new SINDA routine, D1FLTD, for use in VARIABLES 1 of SINDA, to access the processed (word-addressable) orbital data reduction center flight data and store the appropriate measurement temperature in the desired SINDA temperature location. The ODRC flight data that is to be used for driving the boundary nodes must be assigned a logical unit number and must reside on a word-addressable file. The user must also provide two SINDA constants for the word positions of the first and last words of the temperature record for each measurement identifier (MID), i.e. each call to D1FLTD, used in the model. D1FLTD is then called from the VARIABLES 1 block to obtain the SINDA boundary node temperature for any MID on the file at any time point.

Damico, S. J.↗
NASA NTRS1982

Global pictures of the ozone field from high altitudes from DE-I

Detailed synoptic views of the column ozone field can be obtained by the Spin-Scan Ozone Imager (SOI) (Keating et al., 1981) aboard the Dynamics Explorer I satellite. The eccentric polar orbit with an apogee altitude of 23,000 km allows high resolution global-scale images to be obtained within 12 minutes, and allows regions to be viewed for long periods of time. At perigee, a pixel size of nadir measurements of 3 km is possible, and measurements are determined using the backscattered ultraviolet technique. A wavelength measurement of 317.5 nm is used as there are limitations in filter locations and it allows comparison with Nimbus 7 SBUV/TOMS data. Consideration of the reflectivities of this data aids in checking the SOI data reduction algorithm. SOI data show short-term (less than one day) variations in the observed ozone field, and a negative correlation (greater than 0.9) between ozone and tropopause heights. It is expected, due to this correlation, that SOI data will aid in understanding the time evolution of dynamics near the tropopause.

Keating, G. M.↗
NASA NTRS1988

Shuttle Infrared Leeside Temperature Sensing (SILTS) experiment - STS 61-C results

The operation of the Shuttle Infrared Leeside Temperature Sensing experiment on mission STS 61-C of the Space Shuttle Orbiter Columbia is described. False-color video images are shown of surface temperatures on the leeside wing and fuselage areas during entry. Features evident in the imagery are related to aerodynamic flow phenomena such as shock interactions, leeside vortices, and elevon gap effects. Significant anomalies in experiment hardware operation occurred on this flight. The anomalous hardware performance resulted in requirements for major modification to the postflight data reduction procedures. The data collected provide a qualitative, but not a fully quantitative, look at leeside surface heating.

Throckmorton, David A.↗
NASA NTRS1990

Long duration exposure facility post-flight thermal analysis: Orbital/thermal environment data package

A post flight mission thermal environment for the Long Duration Exposure Facility was created as part of the thermal analysis data reduction effort. The data included herein is the thermal parameter data used in the calculation of boundary temperatures. This boundary temperature data is to be released in the near future for use by the LDEF principal investigators in the final analysis of their particular experiment temperatures. Also included is the flight temperature data as recorded by the LDEF Thermal Measurements System (THERM) for the first 90 days of flight.

Berrios, William M.↗
NASA NTRS1995

The faint limit of the Hubble Space Telescope faint object spectrograph and rejection of the cosmic-ray background

The faintest object which can be observed with the Hubble Space Telescope (HST) Faint Object Spectrograph (FOS) is set by the detector cosmic-ray background and not by object flux. We use data from Beaver and Lyons to show that 48% of the background counts are from cosmic rays which each generate a near instantaneous burst of two or more counts. Setting the FOS threshold parameter REJLIM = 1, which rejects all frames with more than one count increases the ratio of signal-to-dark counts (S/D) by a factor of 1.94, regardless of the frame time or the object signal, because half of the dark counts which arrive in single counts (from either cosmic-ray bursts or thermal dark current photoemission) are rejected at the same rate as the object signal. But the signal-to-noise ratio (SNR proportional to S/square root of S + D) increases by at most a factor of 1.35, and for realistic parameters and taking into account dead time, we expect a gain in SNR of only 1.18. If a diode has failed and now emits noise, no data at all will be recorded. The chance of this occurring is approximately = 10% , and for this reason we do not recommend the use of REJLIM. The two-point correlation function of dark counts per pixel has strong peaks every four pixels, caused by the action of quarter-stepping on the counts from large bursts. The counts from such bursts spread over at least 80-100 diodes, and we show that such bursts can be rejected during data reduction if the data are recorded in RAPID mode with individual exposures of about 35 seconds. The SNR of the spectrum can also be improved by weighting each exposure by its SNR (a function ofthe mean dark count rate at that time), since dark varies by a factor of 2 around an orbit. These two procedures together increase the SNR by a factor of 1.1.3 (a 28% gain in exposure time) in regions of a spectrum where the object is much fainter than the background. We find that the Ly-alpha and O I sky emission lines give at most 4 (counts/array/s/sq arcsec), and typically half this number. With a small frame time and a small entrance aperture, these counts cause REJLIM = 1 to reject only a few percent of the data. We discuss only the HST FOS blue side detector, but the same ideas apply to any photon counter which records bursts of noise, and the calculations resemble those for the loss of signal due to coincidences in photon counters. In the ideal photon counter the dark counts are readily distinguished from photons. One way to do this is to add detectors which records only dark current, so that every cosmic ray produces more than one count and the instrument can be operated in an anti-coincidence mode.

Tytler, David↗
NASA NTRS2005

Tools and Data Services from the NASA Earth Satellite Observations for Remote Sensing Commercial Applications

Several commercial applications of remote sensing data, such as water resources management, environmental monitoring, climate prediction, agriculture, forestry, preparation for and migration of extreme weather events, require access to vast amounts of archived high quality data, software tools and services for data manipulation and information extraction. These on the other hand require gaining detailed understanding of the data's internal structure and physical implementation of data reduction, combination and data product production. The time-consuming task must be undertaken before the core investigation can begin and is an especially difficult challenge when science objectives require users to deal with large multi-sensor data sets of different formats, structures, and resolutions.

Vicente, Gilberto↗
NASA NTRS2005

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement - Part III: Material Property Characterization, Analysis, and Test Methods

The objective of this report is to contribute to the independent assessment of the Space Shuttle External Tank Foam Material. This report specifically addresses material modeling, characterization testing, data reduction methods, and data pedigree. A brief description of the External Tank foam materials, locations, and standard failure modes is provided to develop suitable background information. A review of mechanics based analysis methods from the open literature is used to provide an assessment of the state-of-the-art in material modeling of closed cell foams. Further, this report assesses the existing material property database and investigates sources of material property variability. The report presents identified deficiencies in testing methods and procedures, recommendations for additional testing as required, identification of near-term improvements that should be pursued, and long-term capabilities or enhancements that should be developed.

Gates, Thomas S.↗
NASA NTRS2005

Tools and Data Services from the NASA Earth Satellite Observations for Climate Applications

Climate science and applications require access to vast amounts of archived high quality data, software tools and services for data manipulation and information extraction. These on the other hand require gaining detailed understanding of the data's internal structure and physical implementation to data reduction, combination and data product production. This time-consuming task must be undertaken before the core investigation can begin and is an especially difficult challenge when science objectives require users to deal with large multi-sensor data sets of different formats, structures, and resolutions. In order to address these issues the Goddard Space Flight Center (GSFC) Earth Sciences (GES), Data and Information Service Center (DISC) Distributed Active Archive Center (DAAC) has made great progress in facilitating science and applications research by developing innovative tools and data services applied to the Earth sciences atmospheric and climate data. The GES/DISC/DAAC has successfully implemented and maintained a long-term climate satellite data archive and developed tools and services to a variety of atmospheric science missions including AIRS, AVHRR, MODIS, SeaWiFS, SORCE, TOMS, TOVS, TRMM, and UARS and Aura instruments providing researchers with excellent opportunities to acquire accurate and continuous atmospheric measurements. Since the number of climate science products from these various missions is steadily increasing as a result of more sophisticated sensors and new science algorithms, the main challenge for data centers like the GES/DISC/DAAC is to guide users through the variety of data sets and products, provide tools to visualize and reduce the volume of the data and secure uninterrupted and reliable access to data and related products. This presentation will describe the effort at the GES/DISC/DAAC to build a bridge between multi-sensor data and the effective scientific use of the data, with an emphasis on the heritage satellite observations and science products for climate applications. The intent is to inform users of the existence of this large collection of data and products; suggest starting points for cross-platform science projects and data mining activities and provide data services and tools information. More information about the GES/DISC/DAAC satellite data and products, tools, and services can be found at http://daac.gsfc.nasa.gov.

Vicente, Gilberto A.↗
NASA NTRS2006

Effects of data selection on the assimilation of AIRS data

The Atmospheric InfraRed Sounder (AIRS), flying aboard NASA's Earth Observing System (EOS) Aqua satellite with the Advanced Microwave Sounding Unit-A (AMSU-A), has been providing data for use in numerical weather prediction (NWP) and data assimilation systems (DAS) for over three years. The full AIRS data set is currently not transmitted in near-real-time (NRT) to the NWP centers. Instead, data sets with reduced spatial and spectral information are produced and made available in NRT. In this paper, we evaluate the use of different channel selections and error specifications. We achieved significant positive impact from the Aqua AIRS/AMSU-A combination in both hemispheres during our experimental time period of January 2003. The best results were obtained using a set of 156 channels that did not include any in the 6.7micron water vapor band. The latter have a large influence on both temperature and humidity analyses. If observation and background errors are not properly specified, the partitioning of temperature and humidity information from these channels will not be correct, and this can lead to a degradation in forecast skill. We found that changing the specified channel errors had a significant effect on the amount of data that entered into the analysis as a result of quality control thresholds that are related to the errors. However, changing the channel errors within a relatively small window did not significantly impact forecast skill with the 155 channel set. We also examined the effects of different types of spatial data reduction on assimilated data sets and NWP forecast skill. Whether we picked the center or the warmest AIRS pixel in a 3x3 array affected the amount of data ingested by the analysis but had a negligible impact on the forecast skill.

Joiner, Joanna↗
NASA NTRS2012

The HEASARC Swift Gamma-Ray Burst Archive: The Pipeline and the Catalog

Since its launch in late 2004, the Swift satellite triggered or observed an average of one gamma-ray burst (GRB) every 3 days, for a total of 771 GRBs by 2012 January. Here, we report the development of a pipeline that semi automatically performs the data-reduction and data-analysis processes for the three instruments on board Swift (BAT, XRT, UVOT). The pipeline is written in Perl, and it uses only HEAsoft tools and can be used to perform the analysis of a majority of the point-like objects (e.g., GRBs, active galactic nuclei, pulsars) observed by Swift. We run the pipeline on the GRBs, and we present a database containing the screened data, the output products, and the results of our ongoing analysis. Furthermore, we created a catalog summarizing some GRB information, collected either by running the pipeline or from the literature. The Perl script, the database, and the catalog are available for downloading and querying at the HEASARC Web site.

BURST ARCHIVE↗