Search NASA⌕ Search

SEARCH · Search NASA

Results for “DFT simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Elevating density functional theory to chemical accuracy for water simulations through a density-corrected many-body formalism

Abstract Density functional theory (DFT) has been extensively used to model the properties of water. Albeit maintaining a good balance between accuracy and efficiency, no density functional has so far achieved the degree of accuracy necessary to correctly predict the properties of water across the entire phase diagram. Here, we present density-corrected SCAN (DC-SCAN) calculations for water which, minimizing density-driven errors, elevate the accuracy of the SCAN functional to that of “gold standard” coupled-cluster theory. Building upon the accuracy of DC-SCAN within a many-body formalism, we introduce a data-driven many-body potential energy function, MB-SCAN(DC), that quantitatively reproduces coupled cluster reference values for interaction, binding, and individual many-body energies of water clusters. Importantly, molecular dynamics simulations carried out with MB-SCAN(DC) also reproduce the properties of liquid water, which thus demonstrates that MB-SCAN(DC) is effectively the first DFT-based model that correctly describes water from the gas to the liquid phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2014

A Frequency Analysis Approach for Categorizing Air Traffic Behavior

A method of analyzing National Air Space (NAS) air traffic that uses the Discrete Fourier Transform (DFT) is presented. The DFT is used to transform time domain traffic count data into the frequency domain where the sources of traffic in air spaces can be identified and characterized more easily. It is shown in simulation that individual traffic flows within Air Route Traffic Control Centers can be distinguished by their periodicity in the DFT plot. Next, three Traffic Management Initiatives (playbook rerouting, metered flows, and Ground Delay Programs) are implemented in simulations and their signature effects on the traffic are identified using the DFT. Finally, historical flight data is studied and the DFT is applied to sector traffic count data. It is found that in many cases, variations in traffic due to rerouting and convective weather disturbances are better highlighted in the frequency domain than in the original time domain data. Initial results of the DFT show it has potential as a tool for measuring and/or predicting NAS behavior for daily tactical planning and control purposes.

fourier transform↗
DOE OSTI2023

Origins of Conformational Heterogeneity in Peptoid Helices Formed by Chiral N -1-Phenylethyl Sidechains

N-substituted glycines (polypeptoids) containing chiral hydrophobic sidechains are known to fold into biomimetic alpha helices. These helix formers often produce conformationally heterogeneous structures and are difficult to characterize at a sub-nanometer resolution. Previously, peptoid N-1-phenylethyl (S)-enantiomer sidechains (Nspe) were inferred from various experiments to form right-handed helices and (R)-enantiomers (Nrpe), left-handed helices. Prior computational work for N(s/r)pe oligomers has struggled to reproduce this trend. Herein, quantum mechanics calculations and molecular dynamics simulations are used to understand the origins of this discrepancy. Results from DFT and molecular mechanics calculations on a variety of Nspe and Nrpe oligomers as a function of chain length are in agreement, showing that Nspe and Nrpe prefer left- and right-handed helices, respectively. Additional metadynamics simulations are used to study Nrpe and Nspe oligomers folding in water. These results show that the free-energy driving forces for assembly into a helical backbone configuration are very small (within ~k B T). Lastly, we compare DFT calculations for other experimentally characterized peptoid sidechains, N(r/s)sb, N(r/s)tbe, and N(r/s)npe. In this analysis, we show that peptoid sidechains determined to be more robust experimentally (tbe and npe) have helical preferences opposite the trend seen in less robust assemblies formed by N(r/s)pe and N(r/s)sb chemistries. Furthermore, the more robust tbe and nnpe favor the (S)-enantiomer to right-handed and the (R)-enantiomers to left-handed helices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational Investigation of the Role of Active Site Heterogeneity for aSupported Organovanadium(III) Hydrogenation Catalyst

A crucial consideration for supported heterogeneous catalysts is the nonuniformity of the active sites, particularly for supported organometallic catalysts. Standard spectroscopic techniques, such as X-ray absorption spectroscopy, reflect the nature of the most populated sites, which are often intrinsically structurally distinct from the most active catalytic sites. Additionally, with computational models, often, only a few representative structures are used to depict catalytic active sites on a surface, even though there are numerous observable factors of surface heterogeneity that contribute to the kinetically favorable active species. A previously reported study on the mechanism of a surface organovanadium-(III) catalyst [(SiO 2 )V III (Mes)(THF)] for styrene hydrogenation yielded two possible mechanisms: heterolytic cleavage and redox cycling. These two mechanistic scenarios are challenging to differentiate experimentally since the kinetic readouts of the catalyst are identical. To showcase the importance of modeling surface heterogeneity and its effect on catalytic activity, density functional theory (DFT) computational models of a series of potential active sites of [(SiO 2 )V III (Mes)(THF)] for the reaction pathways are applied in combination with kinetic Monte Carlo (kMC) simulations. Computed results were then compared to the previously reported experimental kinetic study: (1) DFT free-energy reaction pathways indicated the likely active site and pathway for styrene hydrogenation, a heterolytic cleavage pathway requiring a bare tripodal vanadium site. (2) From the kMC simulations, a mixture of different bond lengths from the support oxygen to the metal center was required to qualitatively describe the experimentally observed kinetic aspects of a supported organovanadium(III) catalyst for olefin hydrogenation. This work underscores the importance of modeling surface heterogeneity in computational catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Fluoroethylene Carbonate Additives on the Initial Formation of the Solid Electrolyte Interphase on an Oxygen-Functionalized Graphitic Anode in Lithium-Ion Batteries

The formation of a solid electrolyte interphase (SEI) at the electrode/electrolyte interface substantially affects the stability and lifetime of lithium-ion batteries (LIBs). One of the methods to improve the lifetime of LIBs is by the inclusion of additive molecules to stabilize the SEI. To understand the effect of additive molecules on the initial stage of SEI formation, in this work we compare the decomposition and oligomerization reactions of a fluoroethylene carbonate (FEC) additive on a range of oxygen-functionalized graphitic anodes to those of an ethylene carbonate (EC) organic electrolyte. A series of density functional theory (DFT) calculations augmented by ab initio molecular dynamics (AIMD) simulations reveal that EC decomposition on an oxygen-functionalized graphitic ($11\bar{2}0$) edge facet through a nucleophilic attack on an ethylene carbon site (C E ) of an EC molecule (S2 mechanism) is spontaneous during the initial charging process of LIBs. However, decomposition of EC through a nucleophilic attack on a carbonyl carbon (C C ) site (S1 mechanism) results in alkoxide species regeneration that is responsible for continual oligomerization along the graphitic surface. In contrast, FEC prefers to decompose through an S1 pathway, which does not promote alkoxide regeneration. Including FEC as an additive is thus able to suppress alkoxide regeneration and results in a smaller and thinner SEI layer that is more flexible toward lithium intercalation during the charging/discharging process. In addition, we find that the presence of different oxygen functional groups at the surface of graphite dictates the oligomerization products and the LiF formation mechanism in the SEI.

25 ENERGY STORAGE↗
DOE OSTI2020

In silico discovery of active, stable, CO-tolerant and cost-effective electrocatalysts for hydrogen evolution and oxidation

Various databases of density functional theory (DFT) calculations for materials and adsorption properties are currently available. Using the Materials Project and GASpy databases of material stability and binding energies (H* and CO*), respectively, we evaluate multiple aspects of catalysts to discover active, stable, CO-tolerant, and cost-effective hydrogen evolution and oxidation catalysts. Finally, we suggest a few candidate materials for future experimental validations. We highlight that the stability analysis is easily obtainable but provides invaluable information to assess thermodynamic and electrochemical stability, bridging the gap between simulations and experiments. Furthermore, it reduces the number of expensive DFT calculations required to predict catalytic activities of surfaces by filtering out unstable materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reaction processes at step edges on S-decorated Cu(111) and Ag(111) surfaces: MD analysis utilizing machine learning derived potentials

We report a variety of complexation, reconstruction, and sulfide formation processes can occur at step edges on the {111} surfaces of coinage metals (M) in the presence of adsorbed S under ultra-high vacuum conditions. Given the cooperative many-atom nature of these reaction processes, Molecular Dynamics (MD) simulation of the associated dynamics is instructive. However, only quite restricted Density Functional Theory (DFT)-level ab initio MD is viable. Thus, for M = Ag and Cu, we instead utilize the DeePMD framework to develop machine-learning derived potentials, retaining near-DFT accuracy for the M–S systems, which should have broad applicability. These potentials are validated by comparison with DFT predictions for various key quantities related to the energetics of S on M(111) surfaces. The potentials are then utilized to perform extensive MD simulations elucidating the above diverse restructuring and reaction processes at step edges. Key observations from MD simulations include the formation of small metal–sulfur complexes, especially MS 2 ; development of a local reconstruction at A-steps featuring an S-decorated {100} motif; and 3D sulfide formation. Additional analysis yields further information on the kinetics for metal–sulfur complex formation, where these complexes can strongly enhance surface mass transport, and on the propensity for sulfide formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Hydrogen Peroxide‐Induced Overoxidation of Fe−N−C Catalysts: Implications for ORR Activity

Fe−N−C (iron-nitrogen-carbon) electrocatalysts have emerged as promising alternatives to precious metals for the oxygen reduction reaction (ORR), but they remain insufficiently stable for widespread adoption in fuel cell technologies. One plausible mechanism to explain this lack of stability, and the associated catalyst degradation, is oxidative attack on the catalyst surface by hydrogen peroxide, a non-selective byproduct of the ORR. In this work, we perform a detailed analysis of this degradation mechanism, using a combination of periodic Density Functional Theory (DFT) calculations and ab-initio molecular dynamics (AIMD) simulations to probe the thermodynamics and kinetics of hydrogen peroxide activation on a series of candidate active sites for the Fe−N−C catalyst. The results demonstrate that carbon atoms neighbouring FeN 4 active sites can be strongly over-oxidized via formation of hydroxyl or epoxy groups when hydrogen peroxide is present in the electrolyte. In most cases, the interaction between the over-oxidizing groups and the ORR reaction intermediates reduces the ORR activity, and we further propose that the over-oxidized sites are likely precursors to irreversible carbon corrosion and further catalyst deactivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the dynamic evolution of atomically dispersed Cu catalyst for CO 2 electrochemical conversion using integrated XANES analysis and mechanistic studies

Direct electrochemical conversion of CO 2 to ethanol (CH 3 CH 2 OH) offers a promising strategy to lower CO 2 emission while storing energy from renewable electricity. Our recent study reported a carbon-supported atomically dispersed Cu catalyst that achieved the highest reported selectivity for CH 3 CH 2 OH formation (91%) at a relatively low potential (-0.6 V), however, the active site structure that is responsible for such high activity and selectivity has yet to be understood. Here, in this paper, we demonstrate a computational investigation combining X-ray absorption near edge structure (XANES) simulations and a mechanistic study via density functional theory (DFT) to understand the catalyst structures of this Cu catalyst during electrocatalysis and the corresponding reaction mechanisms of the key products. An integrated computational and experimental XANES analysis depicted the dynamic evolution of the catalytic site during electrocatalysis. The as-prepared, atomically dispersed Cu catalyst aggregates and forms metallic clusters/nanoparticles under electrochemical condition, which then break down to smaller oxidized clusters after electrocatalysis. The formed Cu clusters/nanoparticles showed distinct catalytic activity and selectivity as a function of particle size based on the mechanistic investigation using DFT, which is consistent with experimental observations for catalyst samples with different Cu loadings. This comprehensive study which combines experimental and computational XANES investigation, mechanistic study via DFT calculations, and experimental performance of the catalysts, provides unprecedented dynamic and mechanistic insights into the supported atomically dispersed metal catalysts for CO 2 reduction. Such strategy and details gained can further guide discovery of novel catalyst materials for CO 2 electrochemical reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A theoretical study of solid solution strengthening in the refractory medium entropy alloy Nb 45 Ta 25 Ti 15 Hf 15

The refractory medium-entropy alloy (RMEA) Nb 45 Ta 25 Ti 15 Hf 15 exhibits exceptional tensile ductility and fracture toughness at ambient temperature, but its engineering applications are limited by a lack of high temperature strength. Using a machine-learning interatomic potential (MLIP) with near-density functional theory (DFT) accuracy, we conducted molecular dynamics (MD) and statics simulations of the behavior of dislocations with both screw and edge characters. We also analyze experimentally measured yield strengths using the Rao-Suzuki model and the Maresca-Curtin model modified to include a temperature-dependent shear modulus and a bulk modulus-dependent misfit volume, thereby uncovering the mechanisms underlying the yielding of this RMEA. Compared with the published experimental yield strength, the models parameterized by the MLIP effectively reproduce the experimental results over a wide temperature range. The models and MD simulations indicate that yielding is governed by screw dislocations, with dipole dragging as the dominant mechanism. In MD simulations, we observed a potential softening mechanism not considered by the Rao-Suzuki screw model: slow migration of interstitial jogs along the dislocation core, which could lead to the annihilation of vacancy and interstitial jog pairs by their combination.

BCC complex concentrated alloys↗
DOE OSTI2020

A Physical Model for Understanding the Activation of MoS 2 Basal-plane Sulfur Atoms for the Hydrogen Evolution Reaction

All the DFT calculations are done with the Vienna Ab Initio Simulation Package (VASP) using the projector augmented wave method. The Bayesian error estimation exchange-correlation functionals (BEEF) with van der Waals interactions are employed. A plane-wave cutoff energy of 400 eV is used together with PAW-PBE potentials where semi core p states are treated as valence. All the calculations allow for spin-polarization. The structures are relaxed until the force is converged to < 0.01 eV/Å. The lattice parameter of MoS 2 unit cell, optimized with this functional, is 3.19 Å. A (4×4) supercell is used to model all the transition metal doped MoS 2 systems studied here, including those with S vacancies. For calculations in the initial dopant structure exploration, the Brillouin zone is sampled with a 3x3x1 Monkhorst-Pack k-point mesh. A 6×6×1 Monkhorst-Pack k-point mesh is used for the H binding energy and density of states calculations. In all calculations, the vacuum layer is set as 15 Å to eliminate periodic interaction perpendicular to the basal plane.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

Thermochemical conversion of biomass to produce drop-in quality biofuels typically involves hydrodeoxygenation (HDO) steps following catalytic fast pyrolysis (CFP) to remove excess oxygen and create a more-stable bio-oil product. HDO reactions are performed by co-feeding the CFP vapor-phase product and H2 gas over a bi-functional catalyst. Noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2) are active and selective toward these HDO reactions. Griffin and co-workers showed that Pt/TiO2 catalysts promote the desired deoxygenation steps for m-cresol HDO while mitigating undesired C-C bond-breaking steps that reduce the overall value/energy density of the biofuel. Such model-compound studies to inform the design of improved catalysts for HDO chemistry are necessary to improve the overall process economics/efficiencies for biofuels production. One important class of bio-derived compounds that has not been studied extensively with respect to HDO chemistry, particularly at the atomic level, is carboxylic acids. Past experimental work indicates that Pt/C and Pt/TiO2 catalysts are selective toward C-C and C-O bond-dissociation products for acetic acid HDO, respectively. To understand the role of Pt/TiO2 active sites in this observed change in selectivity and guide catalyst development, the work in this presentation focuses on modeling the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in acetic acid HDO. Density functional theory (DFT) calculations were performed using the Vienna Ab initio Simulation Package (VASP). The exchange-correlation functional was approximated by the Perdew-Burke-Ernzerhof functional. Dispersion interactions were captured using the D3 method. Projector augmented-wave potentials described electron-ion interactions, and electron wavefunctions were expanded via a planewave basis with an energy cutoff of 500 eV. Activation barriers were calculated using the climbing image nudged elastic band method. Results and Discussion: To discern the role of Pt-metal and Pt-TiO2 interface sites in promoting acetic acid HDO chemistry, Pt(111) slab and anatase TiO2(101)-supported Pt-nanowire (PtNW/OH-TiO2) surface models were constructed, respectively. Because H2 is co-fed in HDO reactions, the anatase support was terminated with OH groups. Interfacial vacancies have been shown to facilitate Ru/TiO2-catalyzed phenol HDO; thus, an interfacial model with an OH vacancy was also considered (PtNW/OHv-TiO2). Pt-TiO2-interface sites stabilize adsorption of all studied acetic acid HDO surface intermediates relative to terrace Pt-metal sites, particularly when an interfacial-OH vacancy is present. Oxygenated species prefer to bind at the OH vacancy through the O atom, suggesting a preference for C-O over C-C bond cleavage at these sites. This hypothesis is supported by net-negative and net-positive average shifts in the reaction energy and activation energy barriers for C-O and C-C bond-breaking steps, respectively, at Pt-TiO2-interface sites relative to Pt-metal sites. Using the calculated energetics, the predicted minimum-energy pathway was determined for each surface. Pt(111) is predicted to follow decarboxylation, producing undesired methane and carbon dioxide. Conversely, PtNW/OH-TiO2 and PtNW/OHv-TiO2 are both predicted to produce desired acetaldehyde and ethane. The interfacial vacancy may also play a key role in facilitating the first C-O bond-breaking step in acetic acid HDO, lowering the barrier by 0.6 eV relative to the defect-free interface model. These results demonstrate the critical role of the Pt-TiO2 interface in the shift in acetic acid HDO selectivity experimentally observed on Pt/C and Pt/TiO2 catalysts. The results herein demonstrate the important role of the Pt-TiO2 interface and interfacial oxygen vacancies in improving the carbon efficiency for HDO reactions in CFP upgrading.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2020

DFT Accurate Interatomic Potential for Molten NaCl from Machine Learning

Molten alkali chloride salts are a critical component in concentrated solar power and nuclear applications. Despite their ubiquity, the extreme chemical reactivity of molten alkali chlorides at high temperatures has presented a significant challenge in characterizing atomic structures and dynamic properties experimentally. In this work, we we investigate molten NaCl by performing high temperature molecular dynamics simulations using a Gaussian Approximation Potential (GAP) trained on Density Functional Theory (DFT) datasets. Our GAP model, trained with a meager 1000 atomic configurations, arrives at near ab initio accuracy with a mean absolute error of 1.5 meV/atom thus enabling fast analysis of high temperature salt properties on large length (5000 ion pairs) and time (> 1ns) scales currently inaccessible to ab initio simulations. Calculated structure factors and diffusion constants from our GAP model simulations show excellent agreement with experiments. Our results indicate that GAP models are able to capture the many-body interactions required to accurately model ionic-systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanisms of Ethylene Epoxidation over Silver from Machine Learning-Accelerated First-Principles Modeling and Microkinetic Simulations

In this work we employed machine learning-augmented density functional theory (DFT) thermodynamic calculations to assess the stability of different AgO x structures under catalytic ethylene epoxidation reaction conditions. We found that there are multiple AgO x surface motifs that could co-exist under the relevant conditions. These included Ag surface oxides (e.g., AgO_p(4 × 4) and Ag 1.83 O) and atomic oxygen-covered Ag(111) surfaces. Furthermore, we employed DFT calculations to evaluate the energetics of different reaction mechanisms by which ethylene and oxygen can react on these surfaces. These studies revealed several energetically viable reaction pathways for ethylene epoxidation. Microkinetic modeling analyses, based on the DFT-calculated reaction pathways, showed that ethylene epoxidation can proceed on all surfaces and that multiple pathways, including those involving Langmuir–Hinshelwood and Eley–Rideal mechanisms, could be involved in selective and unselective reactions. The diversity of mechanisms that we discovered in the context of the relatively simple ethylene epoxidation reaction on Ag suggests that the richness and complexity of surface chemistry are most likely a rule rather than an exception in heterogeneous catalytic chemical transformations on metal surfaces and that the concept of a single or even a dominant mechanism and reaction intermediates might need to be revisited for many reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Gaussian approximation potentials for accurate thermal properties of two-dimensional materials

Two-dimensional materials (2DMs) continue to attract a lot of attention, particularly for their extreme flexibility and superior thermal properties. Molecular dynamics simulations are among the most powerful methods for computing these properties, but their reliability depends on the accuracy of interatomic interactions. While first principles approaches provide the most accurate description of interatomic forces, they are computationally expensive. In contrast, classical force fields are computationally efficient, but have limited accuracy in interatomic force description. Machine learning interatomic potentials, such as Gaussian Approximation Potentials, trained on density functional theory (DFT) calculations offer a compromise by providing both accurate estimation and computational efficiency. Here, in this work, we present a systematic procedure to develop Gaussian approximation potentials for selected 2DMs, graphene, buckled silicene, and h-XN (X = B, Al, and Ga, as binary compounds) structures. We validate our approach through calculations that require various levels of accuracy in interatomic interactions. The calculated phonon dispersion curves and lattice thermal conductivity, obtained through harmonic and anharmonic force constants (including fourth order) are in excellent agreement with DFT results. HIPHIVE calculations, in which the generated GAP potentials were used to compute higher-order force constants instead of DFT, demonstrated the first-principles level accuracy of the potentials for interatomic force description. Molecular dynamics simulations based on phonon density of states calculations, which agree closely with DFT-based calculations, also show the success of the generated potentials in high-temperature simulations.

2D Materials↗
DOE OSTI2025

Development of interatomic potential and effect of ordering on defect properties in CrMnV

Developing materials that can withstand extreme environments, such as high radiation doses and elevated temperatures, is crucial for next-generation particle accelerators, including the 2.4 MW Long-Baseline Neutrino Facility. High-Entropy Alloys have emerged as promising candidates for beam window materials due to their superior mechanical strength, corrosion resistance, and radiation tolerance. In this study, we focus on the Cr–Mn–V alloy system, developing and employing machine-learning interatomic potentials (MLIPs) to investigate the formation of an ordered phase and its influence on defect properties. Using hybrid Monte Carlo-Molecular Dynamics simulations, we observe the formation of a B2-ordered phase at lower temperatures, consistent with Density Functional Theory (DFT) predictions. Ordered structures display a bimodal distribution of migration energies and reduced mean square displacement values, indicating suppressed vacancy diffusion. Our results also show that the migration energy barrier varies based on the atomic species, with Mn and V exhibiting the highest and lowest average barriers, respectively. These findings suggest that atomic ordering inhibits defect mobility, potentially enhancing the radiation resistance of CrMnV alloys. The validated MLIP provides a reliable framework for simulations that are faster than traditional DFT while maintaining the accuracy required to study defect and ordering properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spin-informed universal graph neural networks for simulating magnetic ordering

The screening and discovery of magnetic materials are hindered by the computational cost of first-principles density-functional theory (DFT) calculations required to find the ground state magnetic ordering. Although universal machine-learning interatomic potentials (uMLIPs), also known as atomistic foundation models, offer high-fidelity models of many atomistic systems with significant speedup, they currently lack the inputs required for predicting magnetic ordering. In this work, we present a data-efficient, spin-informed graph neural network framework that incorporates spin degrees of freedom as inputs and preserves physical symmetries, extending the functionality of uMLIPs to simulate magnetic orderings. This framework speeds up DFT calculations through better initial guesses for magnetic moments, determines the ground-state ordering of bulk materials and even generalizes to magnetic ordering in surfaces. Furthermore, we implement a closed-loop anomaly detection approach that effectively addresses the classic "chicken-and-egg" problem of creating a high-quality dataset while developing a uMLIP, unearthing anomalies in large benchmark datasets and boosting model accuracy.

Xu, Wenbin↗
NASA NTRS2002

Collaborative Simulation Grid: Multiscale Quantum-Mechanical/Classical Atomistic Simulations on Distributed PC Clusters in the US and Japan

A multidisciplinary, collaborative simulation has been performed on a Grid of geographically distributed PC clusters. The multiscale simulation approach seamlessly combines i) atomistic simulation backed on the molecular dynamics (MD) method and ii) quantum mechanical (QM) calculation based on the density functional theory (DFT), so that accurate but less scalable computations are performed only where they are needed. The multiscale MD/QM simulation code has been Grid-enabled using i) a modular, additive hybridization scheme, ii) multiple QM clustering, and iii) computation/communication overlapping. The Gridified MD/QM simulation code has been used to study environmental effects of water molecules on fracture in silicon. A preliminary run of the code has achieved a parallel efficiency of 94% on 25 PCs distributed over 3 PC clusters in the US and Japan, and a larger test involving 154 processors on 5 distributed PC clusters is in progress.

Kikuchi, Hideaki↗