Search NASA⌕ Search

SEARCH · Search NASA

Results for “Deceleration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Human Mars Entry, Descent and Landing Architecture Study: Deployable Decelerators

NASA’s Entry, Descent and Landing Architecture Study uses a trajectory simulation framework to evaluate various technologies and concepts of operations for human scale EDL at Mars. The study results inform agency technology investments. This paper summarizes the design assumptions and analysis of two deployable entry concepts performed in Phase 2 of the study. The entry concepts include a rigid deployable called the Adaptable Deployable Entry Placement Technology and an inflatable concept called the Hypersonic Inflatable Aerodynamic Decelerator. This paper describes the concept operations of these vehicles to deliver a 20-metric ton payload to the surface of Mars. Details of vehicle design and flight performance are summarized along with results of analysis on the aft body heating and its effect on the payload. Finally, recommended technology investments based on the results are presented.

Dwyer Cianciolo, Alicia↗

Heatshields for Aerogravity Assist Vehicles Whose Deceleration at Titan Saves Mass for Future Flagship Class Exploration of Enceladus

This paper reports the feasibility of using mature heatshield materials for an aerogravity assist (AGA) vehicle whose deceleration in Titan’s atmosphere is a mass-saving enabler for nine different Enceladus missions (T. Spilker et al. 2009). A geometry for the Titan AGA vehicle is recommended as are high-fidelity flow computations on that shape.

James O. Arnold↗

Heat Shields for Aerogravity Assist Vehicles Whose Deceleration at Titan Saves Mass for Future Flagship Class Exploration of Enceladus

A mission of great Astrobiological interest is one that would search for life signatures associated with the oceans and geysers of Enceladus [1]. Spilker et al., [2] have shown in a 2009 paper that use of an Aerogravity Assist (AGA) maneuver with a blunt body in Titan’s atmosphere could enable a Flagship Class Mission to Enceladus within reasonable cost ($3 B) and mission duration (14 years). This paper will summarize the 2023 Decadal Survey (DS) Whitepaper by Arnold, et al. [3] that estimated heat shield masses for an AGA vehicle whose deceleration in Titan’s atmosphere saves mass for future missions to explore Enceladus. This study focused on Titan AGA for an Enceladus lander corresponding to mission “E” in the Spilker, et al. paper [2]. The analysis is the first reported for heat shield requirements for an AGA aeroshell that accounts for the convective and radiation heating arising from flight in Titan’s atmosphere.

James O. Arnold↗

Small Satellite-sized Hypersonic Inflatable Decelerators for Interplanetary Science Missions

To take full advantage of our increased access to space, through reduced launch costs that ridesharing opportunities present, innovative and lower cost options for interplanetary exploration are needed. Capitalizing on the technology miniaturization trends and the SmallSat class of vehicles could provide advancements for interplanetary space exploration. Presented here, are the results of a feasibility study conducted during an internship at NASA Langley Research Center that explored the use of a SmallSat-sized Hypersonic Inflatable Aerodynamic Decelerator (HIAD) to enable interplanetary orbital science missions via aerocapture.

Shelly C. Mann↗

Small Satellite-sized Hypersonic Inflatable Decelerators for Interplanetary Science Missions

To take full advantage of our increased access to space, through reduced launch costs that ridesharing opportunities present, innovative and lower cost options for interplanetary exploration are needed. Capitalizing on the technology miniaturization trends and the SmallSat class of vehicles could provide advancements for interplanetary space exploration. Presented here, are the results of a feasibility study conducted during an internship at NASA Langley Research Center that explored the use of a SmallSat-sized Hypersonic Inflatable Aerodynamic Decelerator (HIAD) to enable interplanetary orbital science missions via aerocapture.

Shelly C. Mann↗

Flight Mechanics Analysis of Low-Earth Orbit Flight Test of an Inflatable Decelerator

The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) successfully demonstrated the capability of an inflatable aeroshell. Prior to launch, flight mechanics analysis was conducted to better understand the predicted splashdown point of the re-entry vehicle and ejectable data recorder. Best estimated trajectory separation states were utilized to understand the LOFTID trajectory over the entire 36 minute launch window. Weather forecasting model were integrated into the simulation to improve trajectory prediction accuracy. Automation tools were developed to facilitate the rapid generation of trajectory predictions during operations. The resulting improvements to the flight mechanics modeling and simulation allowed for pre-launch splashdown point to be within 3 nautical miles of the actual splashdown point.

Rohan G Deshmukh↗

Trajectory Reconstruction of the Low-Earth Orbit Flight Test of an Inflatable Decelerator

The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) project conducted a flight test of a 6m inflatable aeroshell. The LOFTID test article was a secondary payload on an Atlas V launcher that carried the Joint Polar Satellite System-2 (JPSS-2) as its primary payload. The vehicle launched on November 10th, 2022. After reaching orbit, the LOFTID test article inflated the aeroshell, separated from the upper stage on an entry trajectory, and entered the atmosphere to splash down in the Pacific Ocean under parachutes. The test concept of operations is shown in Figure 1. The test article was instrumented with a variety of sensors to be used for post-flight evaluation of vehicle performance. Data from one of the key sensors for trajectory reconstruction, the Inertial Measurement Unit (IMU), was not captured in the data recorder due to a malfunction. Data from the nose cone mounted Flush Air Data Sensing (FADS) system were successfully acquired. The layout of the FADS sensors and the measured pressures during atmospheric entry are shown in Figure 2. The FADS data were combined with a Newtonian flow pressure model [1, 2] to produce estimates of the atmospheric relative trajectory. A Mach number anchoring technique given in [2] was used to stabilize estimates in high speed flight conditions. Since no IMU data were available, a trajectory simulation was used to provide the Mach number time history. The resulting estimates of the atmospheric-relative trajectory are shown in Figures 3. Given the loss of the IMU data, alternate methods for trajectory reconstruction are being explored. One approach under investigation is the use of the on-board video recorder data to be analyzed to reconstruct attitude motion. This approach is currently under investigation and will be reported on in the final paper. The Newtonian flow pressure model for the FADS analysis will also be updated with a CFD-based pressure model.

Christopher D Karlgaard↗

The Design of the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Reentry Vehicle (RV)

This discussion will involve the design and architecture of the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Reentry Vehicle (RV). It will describe the structure and modular design of the RV, expounding on its various subsystems, including power and commanding, data handling and recovery, instrumentation, the inflation system, and the aeroshell. The unique launch vehicle architecture for the LOFTID mission, as a massive rideshare payload, required the development of supporting flight systems, including the Payload Adapter Separation System (PASS) and the Reentry Vehicle Payload Adapter Interface Ring (RVPAIR). To do no harm to the primary mission, the LOFTID team also designed and delivered a flightworthy Mass Simulator as risk reduction in the event the RV was not ready in time for the primary mission launch date. Various challenges and design trades will be discussed, along with a brief description of the RV performance in flight.

R J Bodkin↗

Trajectory Reconstruction of the Low-Earth Orbit Flight Test of an Inflatable Decelerator

The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) project conducted a flight test of a 6m inflatable aeroshell. The LOFTID test article was a secondary payload on an Atlas V launcher that carried the Joint Polar Satellite System-2 (JPSS-2) as its primary payload. The vehicle launched on November 10th, 2022. After reaching orbit, the LOFTID test article inflated the aeroshell, separated from the upper stage on an entry trajectory, and entered the atmosphere to splash down in the Pacific Ocean under parachutes. The test concept of operations is shown in Figure 1. The test article was instrumented with a variety of sensors to be used for post-flight evaluation of vehicle performance. Data from one of the key sensors for trajectory reconstruction, the Inertial Measurement Unit (IMU), was not captured in the data recorder due to a malfunction. Data from the nose cone mounted Flush Air Data Sensing (FADS) system were successfully acquired. The layout of the FADS sensors and the measured pressures during atmospheric entry are shown in Figure 2. The FADS data were combined with a Newtonian flow pressure model [1, 2] to produce estimates of the atmospheric relative trajectory. A Mach number anchoring technique given in [2] was used to stabilize estimates in high speed flight conditions. Since no IMU data were available, a trajectory simulation was used to provide the Mach number time history. The resulting estimates of the atmospheric-relative trajectory are shown in Figures 3. Given the loss of the IMU data, alternate methods for trajectory reconstruction are being explored. One approach under investigation is the use of the on-board video recorder data to be analyzed to reconstruct attitude motion. This approach is currently under investigation and will be reported on in the final paper. The Newtonian flow pressure model for the FADS analysis will also be updated with a CFD-based pressure model.

Christopher D. Karlgaard↗

Flight Mechanics Analysis of Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID)

The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) successfully demonstrated the capability of an inflatable aeroshell. Prior to launch, flight mechanics analysis was conducted to better understand the predicted splashdown point of the re-entry vehicle and ejectable data recorder. Best estimated trajectory separation states were utilized to understand the LOFTID trajectory over the entire 36 minute launch window. Weather forecasting model were integrated into the simulation to improve trajectory prediction accuracy. Automation tools were developed to facilitate the rapid generation of trajectory predictions during operations. The resulting improvements to the flight mechanics modeling and simulation allowed for pre-launch splashdown point to be within 3 nautical miles of the actual splashdown point.

Rohan Deshmukh↗

The Design of the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Reentry Vehicle (RV)

This discussion will involve the design and architecture of the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Reentry Vehicle (RV). It will describe the structure and modular design of the RV, expounding on its various subsystems, including power and commanding, data handling and recovery, instrumentation, the inflation system, and the aeroshell. The unique launch vehicle architecture for the LOFTID mission, as a massive rideshare payload, required the development of supporting flight systems, including the Payload Adapter Separation System (PASS) and the Reentry Vehicle Payload Adapter Interface Ring (RVPAIR). To do no harm to the primary mission, the LOFTID team also designed and delivered a flightworthy Mass Simulator as risk reduction in the event the RV was not ready in time for the primary mission launch date. Various challenges and design trades will be discussed, along with a brief description of the RV performance in flight.

R J Bodkin↗

Flight Test Evaluation of Autonomous Descending-Decelerating Precision Point-in-Space Approach to the Ground

New forms of highly automated Advanced Air Mobility (AAM) aircraft, such as electric vertical take-off and landing (eVTOL) vehicles, could transform transportation, cargo delivery, and a variety of public services. The National Aeronautics and Space Administration (NASA) conducted a series of flight demonstrations in collaboration with the Defense Advanced Research Projects Agency (DARPA) and Sikorsky Aircraft (a Lockheed Martin company) to progressively evaluate autonomous technologies. The autoland flight test research is a first in series for investigating the world’s first procedural descending-decelerating automated landing with vertical guidance Instrument Flight Procedures (IFP). The Sikorsky Optionally Piloted Vehicle (OPV) experimental UH-60 Black Hawk was used to evaluate a flight path’s four-dimensional trajectory (4DT) management into primitive commands and then follow those commands to a Point-in-Space (PinS) landing to the ground. All flight procedures were manually flown to the ground at 12 degrees with a 20-knot tail wind to ensure flight safety before automation was engaged. New and novel high precision approach procedures could pave the way for all future VTOL operations.

David Zahn↗

Collective Deceleration: Toward a Compact Beam Dump

With the increasing development of laser accelerators, the electron energy is already beyond GeV and even higher in near future. Conventional beam dump based on ionization or radiation loss mechanism is cumbersome and costly, also has radiological hazards. We revisit the stopping power of high-energy charged particles in matter and discuss the associated problem of beam dump from the point of view of collective deceleration. The collective stopping length in an ionized gas can be several orders of magnitude shorter than the Bethe-Bloch and multiple electromagnetic cascades stopping length in solid. At the mean time, the tenuous density of the gas makes the radioactivation negligible. Such a compact and non-radioactivating beam dump works well for short and dense bunches, which is typically generated from laser wakefield accelerator.

43 PARTICLE ACCELERATORS↗

Mesurement of the Decelerating Wake in a Plasma Wakefield Accelerator

Recent experiments at SLAC have shown that high gradient acceleration of electrons is achievable in meter scale plasmas. Results from these experiments show that the wakefield is sensitive to parameters in the electron beam which drives it. In the experiment the bunch lengths were varied systematically at constant charge. The effort to extract a measurement of the decelerating wake from the maximum energy loss of the electron beam is discussed.

43 PARTICLE ACCELERATORS↗

Videopanorama Frame Rate Requirements Derived from Visual Discrimination of Deceleration During Simulated Aircraft Landing

In order to determine the required visual frame rate (FR) for minimizing prediction errors with out-the-window video displays at remote/virtual airport towers, thirteen active air traffic controllers viewed high dynamic fidelity simulations of landing aircraft and decided whether aircraft would stop as if to be able to make a turnoff or whether a runway excursion would be expected. The viewing conditions and simulation dynamics replicated visual rates and environments of transport aircraft landing at small commercial airports. The required frame rate was estimated using Bayes inference on prediction errors by linear FRextrapolation of event probabilities conditional on predictions (stop, no-stop). Furthermore estimates were obtained from exponential model fits to the parametric and non-parametric perceptual discriminabilities d' and A (average area under ROC-curves) as dependent on FR. Decision errors are biased towards preference of overshoot and appear due to illusionary increase in speed at low frames rates. Both Bayes and A - extrapolations yield a framerate requirement of 35 < FRmin < 40 Hz. When comparing with published results [12] on shooter game scores the model based d'(FR)-extrapolation exhibits the best agreement and indicates even higher FRmin > 40 Hz for minimizing decision errors. Definitive recommendations require further experiments with FR > 30 Hz.

deceleration perception↗