Search NASA⌕ Search

SEARCH · Search NASA

Results for “Digital engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

One Small Step for Creo Modelers, One Giant Leap for "Grey Beards": Using MBD Methodologies to Launch Astronauts and Hardware to Near-Earth Objects such as Asteroids, the Moon and Mars

This presentation will focus on the modernization of design and engineering practices through the use of Model Based Definition methodology. By gathering important engineering data into one 3D digital data set, applying model annotations, and setting up model view states directly in the 3D CAD model, model-specific information can be published to Windchill and CreoView for use during the Design Review Process. This presentation will describe the methods that have been incorporated into the modeling.

Jones, Corey↗
NASA NTRS2019

After LM: NASA Lunar Lander Concepts Beyond Apollo

As this document is being compiled in 2019, NASA is once again planning a return to the Moon, and new lunar lander designs are being generated. Compared to Apollo, crews are projected to be larger (at least four per mission) and stay times longer (beginning at 6.5 days). However, it is expected that the landers will look much like the designs in this document because, as stated in the introduction, lunar lander design is a response to the simple physics that governs the tasks they are asked to perform. Design is also a living thing. New crewed lander designs will continue to emerge up until the point that humans return to the Moon, and even beyond. New players from different countries and commercial providers will create new designs based on new technologies and new requirements. Until some breakthrough technology or new physics principle is created, each lander will respond to the current physics of lunar landing. There may come a time, generations from now, when future engineers are paging through a digital copy of this catalog and reflecting on the early work of lunar lander designers. “Those Apollo guys were really smart, given that they started with nothing as a reference. The Lunar Module – now THAT was a great lunar lander design.”

Altair spacecraft↗
NASA NTRS1972

Digital circuits for computer applications: A compilation

The innovations in this updated series of compilations dealing with electronic technology represent a carefully selected collection of digital circuits which have direct application in computer oriented systems. In general, the circuits have been selected as representative items of each section and have been included on their merits of having universal applications in digital computers and digital data processing systems. As such, they should have wide appeal to the professional engineer and scientist who encounter the fundamentals of digital techniques in their daily activities. The circuits are grouped as digital logic circuits, analog to digital converters, and counters and shift registers.

Source record↗
NASA NTRS2006

System Would Detect Foreign-Object Damage in Turbofan Engine

A proposed data-fusion system, to be implemented mostly in software, would further process the digitized and preprocessed outputs of sensors in a turbofan engine to detect foreign-object damage (FOD) [more precisely, damage caused by impingement of such foreign objects as birds, pieces of ice, and runway debris]. The proposed system could help a flight crew to decide what, if any, response is necessary to complete a flight safely, and could aid mechanics in deciding what post-flight maintenance action might be needed. The sensory information to be utilized by the proposed system would consist of (1) the output of an accelerometer in an engine-vibration-monitoring subsystem and (2) features extracted from a gas path analysis. ["Gas path analysis" (GPA) is a term of art that denotes comprehensive analysis of engine performance derived from readings of fuel-flow meters, shaft-speed sensors, temperature sensors, and the like.] The acceleration signal would first be processed by a wavelet-transform-based algorithm, using a wavelet created for the specific purpose of finding abrupt FOD-induced changes in noisy accelerometer signals. Two additional features extracted would be the amplitude of vibration (determined via a single- frequency Fourier transform calculated at the rotational speed of the engine), and the rate of change in amplitude due to an FOD-induced rotor imbalance. This system would utilize two GPA features: the fan efficiency and the rate of change of fan efficiency with time. The selected GPA and vibrational features would be assessed by two fuzzy-logic inference engines, denoted the "Gas Path Expert" and the "Vibration Expert," respectively (see Figure 1). Each of these inference engines would generate a "possibility" distribution for occurrence of an FOD event: Each inference engine would assign, to its input information, degrees of membership, which would subsequently be transformed into basic probability assignments for the gas path and vibration components. The outputs of the inference engines would be fused by use of Dempster s combination algorithm (more precisely, an algorithm, based on the Dempster-Shafer-Yager theory of evidence, for fusing uncertain or imprecise information) to provide a reduced body of information to a human or computer decision maker. Figure 2 depicts some outputs generated in response to simulated accelerometer and GPA signals

Torso, James A.↗
NASA NTRSDate not supplied

Digital Prototyping Methods to Enable Product Development Analysis Cycle Compression in Aerospace Systems

Historically, the product development life cycle (spanning from origination of a systems concept to initial delivery or fielding) for large-scale aerospace systems is 10-25 years. Examples of recent programs exhibiting this timeline are the Space Shuttle (13 years), , International Space Station (18 years), NASA Hubble telescope (16 years), USAF F-35 Strike Fighter (22 years), Missile Defense Agency THAAD (21 years), USAF V-22 Osprey (26 years), USAF B-2 Spirt (19 years), US Army RAH-66 Comanche (22 years, cancelled prior to fielding), James Webb Space Telescope (25 years), Space Launch System (10 years). This list illustrates the challenges of developing and fielding a modern integrated multi-disciplinary aerospace system. These development timelines are often preceded by significant research and development programs and followed by multiple increments, blocks, or spirals to reach planned operational capability. In the modern era of aerospace system acquisition, there is significant pressure to reduce system development timelines to meet system objectives and enable competitiveness in the current industry and landscape. Across the aerospace industry, a range of rapid acquisition and prototyping programs are seeking to achieve system development within timelines considerably less than 10 years. Notably, in September of 2019, NASA issued a solicitation for the development and demonstration of a Human Landing System (HLS) to deliver humans to the lunar surface by 2024 (5 years) and for the development and demonstration of a more sustainable HLS by 2026 (7 years). Lengthy product development cycle timelines are a product of multiple factors ranging from programmatic, sociological, technical, and systems engineering issues. New approaches in systems engineering provide new ways to enable these compressed development timelines. These approaches employ expanded application of advanced systems engineering methods and cross-cutting digital tools to accelerate system development, utilizing digital prototyping to connect maturing sub-system or component technologies into system or system-of-systems hardware prototypes. Approaches such as the use of system integrating physics relationships to reduce the number of design analysis cycle iterations and state analysis modeling to reduce necessary software testing (and improving coverage of system execution scenarios) represent steps forward in reducing the engineering time needed to field new systems. In addition to cost, schedule and performance benefits, expanded digital exploration and demonstration reduce risk in live system test and demonstration. This incremental demonstration approach, where digital prototyping and demonstration leads and informs full system test and demonstration, could be more important for space applications because of the increased difficulty of test and demonstration of space systems and architectures. The Advanced Concepts Office (ACO) at Marshall Space Flight Center merges traditional multi-disciplinary concept definition methods with modern, cross-cutting systems engineering concepts to enable iterative design and analysis of space architectures and systems through coordinated, strategic management of human capital, technical processes, and technology. This paper provides an overview of that approach, including recent examples and a strategic path forward to enabling continued reduction of aerospace system product development life cycles.

Michael D Watson↗
NASA NTRS1974

Power processor for a 30cm ion thruster

A thermal vacuum power processor for the NASA Lewis 30cm Mercury Ion Engine was designed, fabricated and tested to determine compliance with electrical specifications. The power processor breadboard used the silicon controlled rectifier (SCR) series resonant inverter as the basic power stage to process all the power to an ion engine. The power processor includes a digital interface unit to process all input commands and internal telemetry signals so that operation is compatible with a central computer system. The breadboard was tested in a thermal vacuum environment. Integration tests were performed with the ion engine and demonstrate operational compatibility and reliable operation without any component failures. Electromagnetic interference data were also recorded on the design to provide information on the interaction with total spacecraft.

Biess, J. J.↗
NASA NTRS1983

Telemetry Modulation and Coping

Digital telemetry has supplanted analog telemetry for deep space communications. With digital telemetry, the telecommunications systems design engineer may use error correcting codes. This allows increased error protection at the cost of increased bandwidth. All science telemetry returned from the Voyager and Galileo spacecraft are protected by error correcting codes. Both the modulation and coding of digital telemetry for the deep space channel are considered. The descriptions include relative performance of some competing schemes. However, the treatment given here is, of necessity, cursory. A small class of modulation schemes has proven to be best for the deep space channel. The digital telemetry is either phase-shift-keyed onto a squarewave subcarrier and then phase modulated onto the carrier or the digital telemetry is directly phase modulated onto the carrier.

Kinman, P. W.↗
NASA NTRS1976

IPCS implications for future supersonic transport aircraft

The Integrated Propulsion Control System (IPCS) demonstrates control of an entire supersonic propulsion module - inlet, engine afterburner, and nozzle - with an HDC 601 digital computer. The program encompasses the design, build, qualification, and flight testing of control modes, software, and hardware. The flight test vehicle is an F-111E airplane. The L.H. inlet and engine will be operated under control of a digital computer mounted in the weapons bay. A general description and the current status of the IPCS program are given.

Billig, L. O.↗
NASA NTRS1982

The impact of distributed computing on education

In this paper, developments in digital computer technology since the early Fifties are reviewed briefly, and the parallelism which exists between these developments and developments in analysis and design procedures of structural engineering is identified. The recent trends in digital computer technology are examined in order to establish the fact that distributed processing is now an accepted philosophy for further developments. The impact of this on the analysis and design practices of structural engineering is assessed by first examining these practices from a data processing standpoint to identify the key operations and data bases, and then fitting them to the characteristics of distributed processing. The merits and drawbacks of the present philosophy in educating structural engineers are discussed and projections are made for the industry-academia relations in the distributed processing environment of structural analysis and design. An ongoing experiment of distributed computing in a university environment is described.

Utku, S.↗
NASA NTRS1978

Real time digital propulsion system simulation for manned flight simulators

The QCSEE (Quiet, Clean Short-haul Experimental Engine) Program was initiated by NASA to develop and demonstrate propulsion system technology for an advanced commercial STOL aircraft. One of the specific technical objectives was to provide technology for digital electronic control of future commercial engines. An element of this technology development was to evaluate the digital control in a simulated flight environment. In this connection a simulation program was initiated to evaluate the QCSEE UTW (Under-the-Wing) digital control system over a range of conditions encountered in typical airport operations. The goal of the simulation effort was to derive a real time digital propulsion simulation which could be integrated into a multiengine aircraft simulation. A summary is provided of the accomplishments which have been made in this program.

Mihaloew, J. R.↗
NASA NTRSDate not supplied

3D Scanning Laboratory

The 3D Scanning Lab uses a number of technologies to capture 3D surface data. Those technologies are structured light scanning, discrete point measurement photogrammetry and Light Detecting and Ranging(LIDAR). Structured light is a non-contact optical technique used to capture as built surface geometries quickly and accurately. LIDAR is a laser scanning technique used to capture 3D surfaces. And photogrammetry uses a certified DSLR camera to measure discrete registered and non-registered points in 3D space. MSFC’s 3D Scanning Team uses 3D scanning to provide hardware inspections, reverse engineered CAD models, manufacturing/process development and digital assemblies. The inspection process compares the captured data to CAD, providing a color plot detailing the deviations of the scan data to the CAD model. Dimensional measurements and GD&T can also be interrogated. Inspection can provide scan-to-scan data comparisons which is ideal for assessing tested hardware, e.g. comparing data captured before and after hardware testing. Reverse engineering is used to develop CAD models from scan data. This is useful for heritage hardware studies, developing building or structural models and inputs for simulation studies and design efforts. The lab uses the 3D surface scan data to drive manufacturing/machining processes, termed match machining. This technique has been used to modify nozzles, injectors, additive manufactured parts, composite barrel sections, etc. Parts of an assembly can be scanned and assembled in a virtual environment providing an accurate 3D representation of the assembled hardware in its as-scanned state. This can provide detailed information of internal components that would otherwise not be accessible.

Advanced Manufacturing↗
NASA NTRS1984

Characterization of Landsat-4 MSS and TM digital image data

The launch of Landsat-4 in July 1982 represents a continuation in the remote sensing of earth resources. The 80-m spatial resolution provided by the Multispectral Scanner (MSS) on board the satellite is fine enough to resolve many natural features and land-use details in both rural and urban settings. The second sensor of the spacecraft, the Thematic Mapper (TM), introduces a new era of sensing with refined spatial resolution (30 m) and expanded spectral coverage (7 bands). This paper describes results from engineering studies of the characteristics of digital image data from the two Landsat-4 sensors. These studies form a part of the Landsat-4 Image Data Quality Analysis program (LIDQA). The image data were generally found to be of high quality and the TM provided several improvements over the MSS, in its spatial and spectral characteristics.

Malila, W. A.↗
NASA NTRS1985

Characterization of LANDSAT-4 MSS and TM digital image data

The launch of LANDSAT-4 in July 1982 represents a continuation in the remote sensing of earth resources. The 80-m spatial resolution provided by the Multispectral Scanner (MSS) on board the satellite is fine enough to resolve many natural features and land-use details in both rural and urban settings. The second sensor of the spacecraft, the Thematic Mapper (TM), introduce a new era of sensing with refined spatial resolution (30 m) and expanded spectral coverage (7 bands). This paper describes results from engineering studies of the characteristics of digital image data from the two LANDSAT-4 sensors are described. These studies form a part of the LANDSAT-4 Image Data Quality Analysis program (LIDQA). The image data were generally found to be of high quality and the TM provided several improvements over the MSS, in its spatial and spectral characteristics.

Malila, W. A.↗
NASA NTRS2016

Multidisciplinary Model Transformation Through Simplified Intermediate Representations

There has long been a challenge of making engineering tools from multiple disciplines interoperate. This problem extends to system modeling practices. This challenge has been confronted with a wide variety of techniques. These techniques include attempting to interface tools together into combined suites, attempting to find underlying commonalities in mathematics, supporting connections through semantic encoding, various graph mappings and transformations, and code wrappers. All of these approaches have strengths and weaknesses. These are measured in multiple areas: relative freedom of action of individual domain engineers in developing their own tools, speed of execution, ease of creation, traceability, fidelity of information transfer, and degree of alignment between the concepts of different domains. This paper presents an approach to this interoperation problem currently being used in the World-Wide Web. The approach is to develop easy-to-parse formats that allow flexibility to both the file author and file interpreter. Many of the formats that are currently deployed sacrifice runtime performance for the ability of third parties to easily understand what to do with the data. XML became popular earlier as a de-facto standard format for many web applications, but is now being replaced by JSON to enhance human readability and provide a simpler data model. This is the basis for work in this paper. Our approach, which provides the key to interoperation, is a simplified “shrapnel” intermediate collection of objects and relationships that is the result of a breakdown of the system model into minimal pieces. It is then reassembled on the destination side, forming a two-step transformation. Previous efforts with single-step transformations have proven too difficult to create efficiently. In contrast, the use of this approach leads to an almost automatic procedure for transformation development. The Europa project is a large engineering project that must coordinate the efforts of many different teams with different specialties. The traditional form of exchanging engineering information has been documentation. The vision of model-based systems engineering is to make this information exchange much more digital. This paper presents the application of our simplified format to connecting two different engineering tools to the system model, with a focus on a dynamic mission simulation encoded in Modelica.

Cole, Bjorn↗
NASA NTRS2022

Tri-Agency Reliability Engineering Post: Mission Disposal and Extension Assessment Guidance Addendum

The intent of this addendum is to support the guidance document, Tri-Agency Reliability Engineering Guidance: Post Mission Disposal and Extension Assessment (https://ntrs.nasa.gov/citations/20210024973). It is intended to further assist spacefaring entities in assessing their designs and operational plans for extending missions and Post Mission Disposal (PMD) by providing an hypothetical mission example.

Digital transformation↗
NASA NTRS1976

A digital computer propulsion control facility: Description of capabilities and summary of experimental program results

Flight weight digital computers are being used today to carry out many of the propulsion system control functions previously delegated exclusively to hydromechanical controllers. An operational digital computer facility for propulsion control mode studies has been used successfully in several experimental programs. This paper describes the system and some of the results concerned with engine control, inlet control, and inlet engine integrated control. Analytical designs for the digital propulsion control modes include both classical and modern/optimal techniques.

Zeller, J. R.↗
NASA NTRS1979

A program for calculating load coefficient matrices utilizing the force summation method, L218 (LOADS). Volume 1: Engineering and usage

The LOADS program L218, a digital computer program that calculates dynamic load coefficient matrices utilizing the force summation method, is described. The load equations are derived for a flight vehicle in straight and level flight and excited by gusts and/or control motions. In addition, sensor equations are calculated for use with an active control system. The load coefficient matrices are calculated for the following types of loads: translational and rotational accelerations, velocities, and displacements; panel aerodynamic forces; net panel forces; shears and moments. Program usage and a brief description of the analysis used are presented. A description of the design and structure of the program to aid those who will maintain and/or modify the program in the future is included.

Miller, R. D.↗