Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

DC bias effect on alternating current electrical conductivity of poly(ethylene terephthalate)/alumina nanocomposites

Polymer nanocomposites based on metal oxide (ceramic) nanoparticles are a new class of materials with unique properties and designed for various applications such as electronic device packaging, insulation, fabrication and automotive industries. Poly(ethylene terephthalate) (PET)/alumina (Al{sub 2}O{sub 3}) nanocomposites with filler content between 1 wt% and 5 wt% were prepared by melt compounding method using co-rotating twin screw extruder and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and precision LCR meter techniques. The results revealed that proper uniform dispersion at lower content up to 2 wt% of nano-alumina observed by using TEM. Aggregation of nanoparticles was observed at higher content of alumina examined by using SEM and TEM. The frequency dependences of the alternating current (AC) conductivity (σ{sub AC}) of PET/alumina nanocomposites on the filler content and DC bias were investigated in the frequency range of 20Hz - 1MHz. The results showed that the AC and direct current (DC) conductivity increases with increasing DC bias and nano-alumina content upto 3 wt%. It follows the Jonscher’s universal power law of solids. It revealed that σ{sub AC} of PET/alumina nanocomposites can be well characterized by the DC conductivity (σ{sub DC}), critical frequency (ω{sub c}), critical exponent of the power law (s). Roll of DC bias potential led to an increase of DC conductivity (σ{sub DC}) due to the creation of additional conducting paths with the polymer nanocomposites and percolation behavior achieved through co-continuous morphology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

A turnkey gaseous helium-cooled superconducting CORC ® dc power cable with integrated current leads

Abstract High-temperature superconducting (HTS) direct current (dc) power cable systems, capable of delivering power exceeding 10 MW while being cooled with cryogenic helium gas, have been developed for applications on naval electric ships, electric aircraft and in data centers. Current injection from room temperature into the superconducting power cable causes by far the greatest heat load to the cryogenic system. Efficient current leads with integrated helium gas heat exchangers were developed to inject a current exceeding 1 kA from room temperature into a superconducting Conductor on Round Core (CORC ® ) power cable, without the need for liquid nitrogen pre-cooling. A 2 m long single-pole CORC ® power cable system that included current leads was cooled using a Stirling cryocooler with a closed-loop helium gas circulation system. The turnkey power cable system allowed cool down from room temperature to its operating temperature of 60 K–70 K within 5 h, after which continuous operation at 1.2 kA was demonstrated. The successful development and demonstration of a CORC ® power cable with current leads containing integrated helium gas heat exchangers enables widespread implementation of HTS MW-class, high current density superconducting dc power cables in many applications with constrained space that require a power dense solution.

Physics↗
DOE OSTI2019

Analysis of a Fractal Josephson Junction with Unharmonic Current-Phase Relation

In this paper, a fractal Josephson junction with unharmonic current-phase relation is analytically and numerically analyzed. This system has two, four, or no equilibrium points depending on the external direct current source and unharmonic parameter. The stability analysis of the equilibrium points is carried out. The inclusion of unharmonic current-phase relation in an ideal Josephson junction leads to an increase in the hysteresis of current-voltage characteristics. While the inclusion of fractal characteristics in insulating layer of Josephson junction with harmonic current-phase relation leads to a decrease in the hysteresis of current-voltage characteristics. The inclusion of unharmonic current-phase relation on a fractal Josephson junction leads to an increase in the hysteresis of current-voltage characteristics. The dynamical behavior map of fractal Josephson junction with unharmonic current-phase relation in amplitude and frequency of modulation current plane is depicted. For a suitable choice of modulation parameters of external current source, fractal Josephson junction with unharmonic current-phase relation can exhibit excitable mode, bistable oscillatory mode, and periodic and chaotic behaviors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Alternating current conduction mechanisms of RbMgPO4 compound

Highlights: • Two displacive reversible phase transitions located at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). • The temperature dependence of conductivity was described in terms of Arrhenius relation. • The ac conductivity of this compound is proportional to ω{sup s} where the s values are between 0 and 2. • The (CBH) model was found to be the appropriate transport mechanism in RbMgPO{sub 4} compound. - Abstract: Rubidium magnesium monophosphate (RbMgPO{sub 4}) compound was prepared from highly pure constituents by solid state reaction. It was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC) and impedance spectroscopy. The infrared and Raman spectra were interpreted on the basis of PO{sub 4}{sup 3−} vibrations. DSC revealed two displacive and reversible phase transitions at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). The electrical conductivity was measured in the frequency and temperature range 200 Hz-5 MHz and 423 K–523 K, respectively. The obtained results were analysed by fitting the experimental data to an equivalent circuit model. The temperature dependence of alternating and direct current conductivities (σ{sub ac}, σ{sub dc}) confirms the observed transitions in the calorimetric study; they were described in terms of Arrhenius relation. The activation energy’s values were determined in each phase. The AC conductivity behavior is ensured by a single process defined as a hopping transport mechanism. The conductivity frequency dependence was interpreted using the correlated barrier-hopping model (CBH) in all phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Chemical Immobilization and Conversion of Active Polysulfides Directly by Copper Current Collector: A New Approach to Enabling Stable Room-Temperature Li-S and Na-S Batteries

Here, room–temperature Li/Na–S batteries are promising energy storage solutions, but unfortunately suffer from serious cycling problems rooted in their polysulfide intermediates. The conventional strategy to tackle this issue is to design host materials for trapping polysulfides via weak physical confinement and interfacial chemical interactions. Even though beneficial, their capability for the polysulfide immobilization is still limited. Herein, the unique sulfiphilic nature of metallic Cu is revisited. Upon the exposure to polysulfide in aqueous or aprotic solution, the surface sulfidization rapidly takes place, resulting in the formation of Cu 2 S nanoflake arrays with tunable texture. When the sulfidized Cu current collector is directly used as the sulfur–equivalent cathode, it enables high–performance Li/Na–S batteries at room temperature with reasonable high sulfur loading. Specific capacities up to ≈1200 mAh g –1 for Li–S and ≈400 mAh g –1 for Na–S are measured when normalized to the amount of equivalent sulfur, and can be readily sustained for >1000 cycles.

25 ENERGY STORAGE↗
DOE OSTI2015

Simulation of electric-field and spin-transfer-torque induced magnetization switching in perpendicular magnetic tunnel junctions

Macrospin simulations are performed to model the magnetization switching driven by the combined action of electric-field and spin-polarized electric current (spin-transfer torque; STT) in MgO/CoFeB based magnetic tunnel junctions with interfacial perpendicular magnetic anisotropy. The results indicate that at low current case, the free layer magnetization shows a fast toggle-like switching, the final parallel or antiparallel magnetization state is determined by the electric-field effect, and the STT just helps or resists it to reach the final state depending on the current direction. However, with the increase of current strength, the contribution of STT effect gradually increases, which eventually achieves a deterministic magnetization switching state. Simulations further demonstrate that by appropriately tuning the parameters of applied electric-field and current the power consumption can be easily reduced by two orders of magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Adoption Pathways for DC Power Distribution in Buildings

Driven by the proliferation of DC energy sources and DC end-use devices (e.g., photovoltaics, battery storage, solid-state lighting, and consumer electronics), DC power distribution in buildings has recently emerged as a path to improved efficiency, resilience, and cost savings in the transitioning building sector. Despite these important benefits, there are several technological and market barriers impeding the development of DC distribution, which have kept this technology at the demonstration phase. This paper identifies specific end-use cases for which DC distribution in buildings is viable today. We evaluate their technology and market readiness, as well as their efficiency, cost, and resiliency benefits while addressing implementation barriers. The paper starts with a technology review, followed by a comprehensive market assessment, in which we analyze DC distribution field deployments and their end-use characteristics. We also conduct a survey of DC power and building professionals through on-site visits and phone interviews and summarize lessons learned and recommendations. In addition, the paper includes a novel efficiency analysis, in which we quantify energy savings from DC distribution for different end-use categories. Based on our findings, we present specific adoption pathways for DC in buildings that can be implemented today, and for each pathway we identify challenges and offer recommendations for the research and building community.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1970

Switching circuit Patent

Solid state circuit for switching alternating current input signal as function of direct current gating transistor

Chapman, C. P.↗
NASA NTRS1984

Simplified dc to dc converter

A dc to dc converter which can start with a shorted output and which regulates output voltage and current is described. Voltage controlled switches directed current through the primary of a transformer the secondary of which includes virtual reactance. The switching frequency of the switches is appropriately varied to increase the voltage drop across the virtual reactance in the secondary winding to which there is connected a low impedance load. A starting circuit suitable for voltage switching devices is provided.

Gruber, R. P.↗
NASA NTRS1990

Automated Power-Distribution System

Automated power-distribution system monitors and controls electrical power to modules in network. Handles both 208-V, 20-kHz single-phase alternating current and 120- to 150-V direct current. Power distributed to load modules from power-distribution control units (PDCU's) via subsystem distributors. Ring busses carry power to PDCU's from power source. Needs minimal attention. Detects faults and also protects against them. Potential applications include autonomous land vehicles and automated industrial process systems.

Thomason, Cindy↗
NASA NTRS2000

Transverse Mode Dynamics of VCSELs Undergoing Current Modulation

Transverse mode dynamics of a 20-micron-diameter vertical-cavity surface-emitting laser (VCSEL) undergoing gain switching by deep current modulation is studied numerically. The direct current (dc) level is set slightly below threshold and is modulated by a large alternating current (ac). The resulting optical pulse train and transverse-mode patterns are obtained numerically. The ac frequency is varied from 2.5 GHz to 10 GHz, and the ac amplitude is varied from one-half to four times that of the dc level. At high modulation frequencies, a regular pulse train is not generated unless the ac amplitude is large enough. At all modulation frequencies, the transverse spatial profile switches from single-mode to multiple-mode pattern as the ac pumping level is increased. Optical pulse widths vary in the range 5-30 ps. with the pulse width decreasing when either the frequency is increased or the ac amplitude is decreased. The numerical modeling uses an approximation form of the semiconductor Maxwell-Bloch equations. Temporal evolution of the spatial profiles of the laser (and of carrier density) is determined without any assumptions about the type or number of modes. Keywords: VCSELs, current modulation, gain switching, transverse mode dynamics, computational modeling

Goorjian, Peter M.↗
NASA NTRSDate not supplied

Dynamic Radioisotope Power Systems Development Status and Path to Flight

Dynamic power conversion offers the potential to produce Radioisotope Power Systems (RPS) that generate higher power outputs and utilize the Pu-238 radioisotope more efficiently. Additionally, dynamic power conversion offers the potential of producing generators with minimal degradation resulting in more power at the end of the mission, when the power is needed. Dynamic power conversion technologies being developed for space applications include the Stirling and Brayton thermodynamic cycle machines. Machines can be built based on these cycles while eliminating wear mechanisms of the moving components, enabling long design life necessary for space missions. The Dynamic Radioisotope Power Systems (DRPS) project at NASA Glenn Research Center (Glenn Research Center) is pursuing the realization of this type of power source on a flight mission. The project currently has three convertor development contracts that will deliver prototype hardware in 2020. This hardware will undergo a gamut of experimental performance verification efforts at NASA GRC. In parallel, the project has also initiated generator design efforts based on these underlying convertor options, and is also on track to build an in-house version of a generator for laboratory system-level testing. The project is also funding control electronics technology, which are necessary to convert alternating current from the dynamic devices to direct current for use by a spacecraft. A lunar mission is being targeted as the first use of this new technology, as DRPS enables a wide range of high-return scientific missions on the moon, while the mission being short in duration (2 years rather than 10 years for an outer planets mission).

Salvatore M Oriti↗
NASA NTRSDate not supplied

Dynamic Radioisotope Power Systems Status and Path to Flight

Dynamic power conversion offers the potential to produce Radioisotope Power Systems (RPS) that generate higher power outputs and utilize the Pu-238 radioisotope more efficiently. Additionally, dynamic power conversion offers the potential of producing generators with minimal degradation resulting in more power at the end of the mission, when the power is needed. Dynamic power conversion technologies being developed for space applications include the Stirling and Brayton thermodynamic cycle machines. Machines can be built based on these cycles while eliminating wear mechanisms of the moving components, enabling long design life necessary for space missions. The Dynamic Radioisotope Power Systems (DRPS) project at NASA Glenn Research Center (Glenn Research Center) is pursuing the realization of this type of power source on a flight mission. The project currently has three convertor development contracts that will deliver prototype hardware in 2020. This hardware will undergo a gamut of experimental performance verification efforts at NASA GRC. In parallel, the project has also initiated generator design efforts based on these underlying convertor options, and is also on track to build an in-house version of a generator for laboratory system-level testing. The project is also funding control electronics technology, which are necessary to convert alternating current from the dynamic devices to direct current for use by a spacecraft. A lunar mission is being targeted as the first use of this new technology, as DRPS enables a wide range of high-return scientific missions on the moon, while the mission being short in duration (2 years rather than 10 years for an outer planets mission).

Salvatore Oriti↗
DOE OSTI2017

Properties of Molybdenum Films Produced by High-Power Impulse Magnetron Sputtering

Results of experiments on deposition of thin molybdenum films on glass substrates by high-power impulse magnetron sputtering are presented. Two high-current modes with different pulse frequencies and durations are used. Properties of the produced molybdenum films are compared with those of films produced by magnetron sputtering at a direct current. It is shown that this method allows the resistivity of molybdenum films to be decreased and their reflectance in the visible range to be increased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2010

N channel JFET based digital logic gate structure

A circuit topography is presented which is used to create usable digital logic gates using N (negatively doped) channel Junction Field Effect Transistors (JFETs) and load resistors, level shifting resistors, and supply rails whose values are based on the direct current (DC) parametric distributions of those JFETs. This method has direct application to the current state of the art in high temperature, for example 300.degree. C. to 500.degree. C. and higher, silicon carbide (SiC) device production. The ability to produce inverting and combinatorial logic enables the production of pulse and edge triggered latches. This scale of logic synthesis would bring digital logic and state machine capabilities to devices operating in extremely hot environments, such as the surface of Venus, near hydrothermal vents, within nuclear reactors (SiC is inherently radiation hardened), and within internal combustion engines. The basic logic gate can be configured as a driver for oscillator circuits allowing for time bases and simple digitizers for resistive or reactive sensors. The basic structure of this innovation, the inverter, can be reconfigured into various analog circuit topographies through the use of feedback structures.

Krasowski, Michael J.↗
DOE OSTI2015

Direct observation of electric field induced pattern formation and particle aggregation in ferrofluids

Ferrofluids typically respond to magnetic fields and can be manipulated by external magnetic fields. Here, we report on formation of visually observable patterns in a diluted low-polarity ferrofluid exposed to external electric fields. This presents a specific type of ferrofluid structure driven by a combined effect of electrohydrodynamics and electrical body forces. The free charge and permittivity variation are considered to play a key role in the observed phenomenon. The corresponding changes in the ferrofluid structure have been found at nanoscale as well. By small-angle neutron scattering (SANS), we show that the magnetic nanoparticles aggregate in direct current (dc) electric field with a strong dependence on the field intensity. The anisotropic aggregates preferably orient in the direction of the applied electric field. Conducting SANS experiments with alternating current (ac) electric fields of various frequencies, we found a critical frequency triggering the aggregation process. Our experimental study could open future applications of ferrofluids based on insulating liquids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Photochemically-Driven CO 2 Release Using a Metastable-State Photoacid for Energy Efficient Direct Air Capture

One of the grand challenges underlying current direct air capture (DAC) technologies relates to the intensive energy cost for sorbent regeneration and CO 2 release, making the massive scale (GtCO 2 /year) deployment required to have a positive impact on climate change economically unfeasible. This challenge underscores the critical need to develop new DAC processes with substantially reduced regeneration energies. Here, in this work, we report a photochemically-driven approach for CO 2 release by exploiting the unique properties of an indazole metastable-state photoacid (mPAH). Our measurements on simulated and amino acid-based DAC systems revealed the potential of mPAH to be used for CO 2 release cycles by regulating pH changes and associated isomers driven by light. Upon irradiating with moderate intensity light, a ≈55 % and ≈68 % to ≈78 % conversion of total inorganic carbon to CO 2 was found for the simulated and amino acid-based DAC systems, respectively. Our results confirm the feasibility of on-demand CO 2 release under ambient conditions using light instead of heat, thereby providing an energy efficient pathway for the regeneration of DAC sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗