Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRONIC MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

A simple model of electron beam initiated dielectric breakdown

A steady state model that describes the internal charge distribution of a planar dielectric sample exposed to a uniform electron beam was developed. The model includes the effects of charge deposition and ionization of the beam, separate trap-modulated mobilities for electrons and holes, electron-hole recombination, and pair production by drifting thermal electrons. If the incident beam current is greater than a certain critical value (which depends on sample thickness as well as other sample properties), the steady state solution is non-physical.

Beers, B. L.↗
NASA NTRS1979

Thermal study of interface between the Orbiter cold plate and typical Shuttle spacecraft payload flight electronics

Spacelab provides a set of Freon line plumbing and cold plates for experiment equipments which are located in the Shuttle pallet and which need active thermal control. The reported study deals with the thermal problem of attaching a Command and Data Handling module with various electronic boxes whose combined footprints on the baseplate are much larger than the cold plate. A description of two modules and the cold plate assembly in the pallet is presented and a thermal model description is provided. The method employed in modeling heat pipes-honey-comb matrix is based upon an effective conductance between the heat pipe vapor and the walls of the heat pipe. The considered thermal models and a computer program are used to perform steady-state thermal analyses. The temperature gradients in the large module baseplate attached to the small cold plate are predicted as a function of the interface plate thickness.

Hwangbo, H.↗
DOE OSTI2025

UV + Damp Heat Induced Power Losses in Fielded Utility N-Type Si PV Modules

A recent trend in commercial PV modules is a transition to n-type silicon cells, including passivated emitter rear totally diffused (n-PERT), tunnel oxide passivated contact (TOPCon), and silicon heterojunction (SHJ). There is evidence via lab studies that some of these cells are more susceptible to UV induced degradation (UVID), yet there is a lack of confirmation that such degradation occurs in the field. Current IEC standards designed to screen for early module failures require only minimal UV exposure (15 kWh/m2 280-400 nm, ~2-3 months equivalent outdoor exposure). Here, we investigate fielded n-PERT silicon (Si) modules from a commercial utility that show power losses of ~2%/year. We present a comprehensive picture of the physics and chemistry of degradation supported by both module and cell electronic characterization (EL, PL, IV, EQE, and DLIT) and materials-level morphological and chemical analysis (SEM, EDS, XPS, FTIR, and HPLC). All sampled site modules show short circuit current (Isc) and open circuit voltage (Voc) losses when compared to unfielded spares, with the most severely degraded also having losses in fill factor (FF). We identify two different degradation modes contributing to overall power loss: (1) external quantum efficiency (EQE) measurements show losses in the blue range of the spectra, indicative of cell surface recombination losses, and (2) variations in high series resistance (Rs) at the cell level that are correlated with compositional differences in cell metallization. Using unfielded spares, we were able to reproduce Voc, Isc, and EQE losses via a minimum UV stress of 67.5 kWh/m2 (280-400 nm), 4.5x the exposure currently required in IEC 61215-2 (MQT 10). Degradation continued with additional UV dosage equivalent to the fielded modules (405 kWh/m2 total), with power loss leveling out at an average of 6.1%. Subsequent 1000 h of 85% RH/85degrees C damp heat testing showed that cells exposed to UV underwent additional severe series resistance degradation, even those without the susceptible paste composition seen in the field, whereas non-UV exposed cells saw little change. We attribute this to higher concentrations of acetic acid generated on the UV exposed area of the module, leading to degradation of the gridline/cell interface and high Rs. This study is unique in that it reproduces field observed utility scale UVID with an accelerated test and supports the need for standards development for longer UV exposure combined with other stress factors to catch materials interplay within a module package.

14 SOLAR ENERGY↗
NASA NTRS1980

Analysis of ambient and beam particle characteristics during the ejection of an electron beam from a satellite in near-geosynchronous orbit on March 30, 1979

An electron beam system was operated over a wide range of beam currents and energies for periods both in sunlight and in eclipse. Complex pitch angle modulations of the electron spectra are separately decomposed for each beam operation. When electrons are emitted perpendicular to the magnetic field with an energy of 3 keV and a current of 0.10 mA they return as a coherent beam only to the parallel detector. Throughout the beam operations the pitch angle distributions show electrons with energy less than beam energy streaming along the field line. Analytic expressions for the satellite electric field are constructed and particle trajectories are determined.

Gussenhoven, M. S.↗
NASA NTRS2000

Plasma Heating and Ultrafast Semiconductor Laser Modulation Through a Terahertz Heating Field

Electron-hole plasma heating and ultrafast modulation in a semiconductor laser under a terahertz electrical field are investigated using a set of hydrodynamic equations derived from the semiconductor Bloch equations. The self-consistent treatment of lasing and heating processes leads to the prediction of a strong saturation and degradation of modulation depth even at moderate terahertz field intensity. This saturation places a severe limit to bandwidth achievable with such scheme in ultrafast modulation. Strategies for increasing modulation depth are discussed.

Li, Jian-Zhong↗
NASA NTRS2008

Optical Coating Performance and Thermal Structure Design for Heat Reflectors of JWST Electronic Control Unit

The James Webb Space Telescope (JWST) consists of an infrared-optimized Optical Telescope Element (OTE) that is cooled down to 40 degrees Kelvin. A second adjacent component to the OTE is the Integrated Science Instrument Module, or ISIM. This module includes the electronic compartment, which provides the mounting surfaces and ambient thermally controlled environment for the instrument control electronics. Dissipating the 200 watts generated from the ISIM structure away from the OTE is of paramount importance so that the spacecraft's own heat does not interfere with the infrared light detected from distant cosmic sources. This technical challenge is overcome by a thermal subsystem unit that provides passive cooling to the ISIM control electronics. The proposed design of this thermal radiator consists of a lightweight structure made out of composite materials and low-emittance metal coatings. In this paper, we will present characterizations of the coating emittance, bidirectional reflectance, and mechanical structure design that will affect the performance of this passive cooling system.

Quijada, Manuel A.↗
DOE OSTI2026

Imaging supermoiré relaxation in helical trilayer graphene

In twisted van der Waals materials, local atomic relaxation can alter the underlying electronic structure. Characterizing lattice reconstruction and its susceptibility to strain is essential for understanding emergent electronic states, especially in multilayers in which interference between moiré lattices yields larger supermoiré patterns whose energy is highly sensitive to local stacking. Here, in this study, we image spatial modulations in the electronic character of helical trilayer graphene, which indicate relaxation into a superstructure of large domains with uniform moiré periodicity. We show that the supermoiré domain size is increased by strain and can be altered in the same device while preserving the local properties within each domain. Finally, we observe a higher conductance at the domain boundaries, consistent with predictions that they host counterpropagating edge modes. Our work provides a real-space visualization of moiré-periodic domains, reveals two independently tunable length scales and demonstrates strain engineering as a route towards designing correlated topological networks at the supermoiré scale.

36 MATERIALS SCIENCE↗
NASA NTRS1994

System Measures Pressures Aboard A Compressor Rotor

Rotating pressure-measuring instrumentation includes on-board calibration standard. Computer-controlled, multichannel instrumentation system acquires pressure measurements from sensors mounted in 1.52-m-diameter rotor of compressor. Includes 5 miniature, electronically scanned pressure (ESP) modules, each containing 48 piezoresistive pressure sensors, pneumatic calibration valve, and electronic circuits for addressing and amplifying output of each sensor. Modules mounted on centerline of rotor, on instrumentation tower located inside nose cone of rotor. Subsystem designed to convert analog signal to distinct frequency without significantly affecting accuracy.

Freedman, Robert J.↗
NASA NTRS2011

Optical Coating Performance for Heat Reflectors of the JWST-ISIM Electronic Component

A document discusses a thermal radiator design consisting of lightweight composite materials and low-emittance metal coatings for use on the James Webb Space Telescope (JWST) structure. The structure will have a Thermal Subsystem unit to provide passive cooling to the Integrated Science Instrument Module (ISIM) control electronics. The ISIM, in the JWST observatory, is the platform that provides the mounting surfaces for the instrument control electronics. Dissipating the control electronic generated-heat away from JWST is of paramount importance so that the spacecraft s own heat does not interfere with the infrared-light gathering of distant cosmic sources. The need to have lateral control in the emission direction of the IEC (ISIM Electronics Compartment) radiators led to the development of a directional baffle design that uses multiple curved mirrorlike surfaces. This concept started out from the so-called Winston non-imaging optical concentrators that use opposing parabolic reflector surfaces, where each parabola has its focus at the opposite edge of the exit aperture. For this reason they are often known as compound parabolic concentrators or CPCs. This radiator system with the circular section was chosen for the IEC reflectors because it offers two advantages over other designs. The first is that the area of the reflector strips for a given radiator area is less, which results in a lower mass baffle assembly. Secondly, the fraction of energy emitted by the radiator strips and subsequently reflected by the baffle is less. These fewer reflections reduced the amount of energy that is absorbed and eventually re-emitted, typically in a direction outside the design emission range angle. A baffle frame holds the mirrors in position above a radiator panel on the IEC. Together, these will direct the majority of the heat from the IEC above the sunshield away towards empty space.

Rashford, Robert A.↗
NASA NTRS1981

The cosmic ray electron/proton intensity ratio between 1965 and 1979

In experimental investigations, differences have been found regarding the modulation of low-energy electrons and protons. These differences cannot be explained on the basis of conventional theory. Evenson et al. (1979) have attempted to relate the differences in the modulation of electrons and protons to the solar field reversal of 1969-1971. The analyses have been inconclusive due to lack of a long time base and to a scarcity of reliable electron data. The present study represents an extension of he investigation of Evenson et al. (1979) to the time period 1965-1979. New data obtained in 1977-1979 are added, 1965 electron data are reexamined, and the time behavior of the helium/proton ratio is considered. It is concluded that there was a systematic shift in the intensity ratio of low-energy electrons to protons in the time period around the reversal of the solar polar magnetic field, leading to a clear difference in the values of the ratio for the two consecutive solar minima 1965 and 1976.

Evenson, P.↗
NASA NTRS1992

NASA. Lewis Research Center Advanced Modulation and Coding Project: Introduction and overview

The Advanced Modulation and Coding Project at LeRC is sponsored by the Office of Space Science and Applications, Communications Division, Code EC, at NASA Headquarters and conducted by the Digital Systems Technology Branch of the Space Electronics Division. Advanced Modulation and Coding is one of three focused technology development projects within the branch's overall Processing and Switching Program. The program consists of industry contracts for developing proof-of-concept (POC) and demonstration model hardware, university grants for analyzing advanced techniques, and in-house integration and testing of performance verification and systems evaluation. The Advanced Modulation and Coding Project is broken into five elements: (1) bandwidth- and power-efficient modems; (2) high-speed codecs; (3) digital modems; (4) multichannel demodulators; and (5) very high-data-rate modems. At least one contract and one grant were awarded for each element.

Budinger, James M.↗
NASA NTRS2001

Predictions of secondary neutrons and their importance to radiation effects inside the International Space Station

As part of a study funded by NASA MSFC to assess thecontribution of secondary particles in producing radiation damage to optoelectronics devices located on the International Space Station (IS), Monte Carlo calculations have been made to predict secondary spectra vs. shielding inside ISS modules and in electronics boxes attached on the truss (Armstrong and Colborn, 1998). The calculations take into account secondary neutron, proton, and charged pion production from the ambient galactic cosmic-ray (GCR) proton, trapped proton, and neutron albedo environments. Comparisons of the predicted neutron spectra with measurments made on the Mir space station and other spacecraft have also been made (Armstrong and Colborn, 1998). In this paper, some initial results from folding the predicted neutron spectrum inside ISS modules from Armstrong and Colborn (1998) with several types of radiation effects response functions related to electronics damage and astronaut-dose are given. These results provide an estimate of the practical importance of neutrons compared to protons in assessing radiation effects for the ISS. Also, the important neutron energy ranges for producing these effects have been estimated, which provides guidance for onboard neutron measurement requirements.

Neutrons↗
NASA NTRS2013

DOT Transmit Module

The Deep Space Optical Terminal (DOT) transmit module demonstrates the DOT downlink signaling in a flight electronics assembly that can be qualified for deep space. The assembly has the capability to generate an electronic pulse-position modulation (PPM) waveform suitable for driving a laser assembly to produce the optical downlink signal. The downlink data enters the assembly through a serializer/ deserializer (SERDES) interface, and is encoded using a serially concatenated PPM (SCPPM) forward error correction code. The encoded data is modulated using PPM with an inter-symbol guard time to aid in receiver synchronization. Monitor and control of the assembly is via a low-voltage differential signal (LVDS) interface

Quirk, Kevin J.↗
NASA NTRS1974

Interplanetary diffusion coefficients for cosmic rays

Information on the cosmic-ray diffusion coefficient, kappa, derived from near-earth observations of the solar modulation of galactic electron fluxes and from the near-earth power spectra of the interplanetary magnetic field, has been used to study the heliocentric radial dependence of kappa, and to derive limits on the spatial extent of the solar modulation region. Representing kappa, as a separable function of radius r and rigidity, and assumming kappa(r) proportional to r to the n-th power, we can place a limit on the power law exponent, n not greater than 1.2. The distance of the modulation boundary is a function of n, and, e.g., for n = 0, falls into the range of 6-25 AU.

Cummings, A. C.↗
DOE OSTI2025

Fundamental Interactions of Bimetallic Cu x Pd y ( x + y = 4) Clusters Supported on the α-WC(0001) Surface and Their Performance for CO 2 Adsorption and Dissociation

The tungsten carbide α-WC(0001) surface, an active system for the activation of H 2 and important hydrogenation processes involving unsaturated hydrocarbons, can serve as a support of bimetallic clusters to produce materials with unique catalytic properties, opening routes for a wide range of technical applications. In particular, Cu x Pd y clusters are of particular interest because they combine metals with different properties. A stochastic method was applied to obtain the geometry of Cu x Pd y (x + y = 4) bare clusters, evaluating thousands of possibilities to obtain stable structures, yielding one isomer for Cu 4 , Cu 2 Pd 2 , Cu 1 Pd 3 , and Pd 4 and two isomers for Cu 3 Pd 1 . These clusters were supported on C and W terminations of the tungsten carbide (0001) surface, exploring all of the binding possibilities. The adsorption energies on the C and W terminations are in the ranges from −2.51 to −3.02 eV and from −2.26 to −3.30 eV, respectively. The strongest and weakest binding was seen for monometallic Cu 4 and Pd 4 clusters on both C and W terminations, while the Cu-Pd bimetallics have intermediate adsorption energies but lack a clear trend in terms of composition. The location of Cu x Pd y clusters over the (0001) surface induces a decrease in the work function relative to the pristine surface, while the cluster-surface Bader charge transfer and variations in the partial density of states point to changes in the electronic structure of the carbide atoms upon binding of the metallic clusters. The d-band center of the Cu x Pd y deposited on WC(0001) indicates an intermediate reactivity among Cu(111) and Pd(111) surfaces, modulating the reactivity with small numbers of Cu and Pd atoms, i.e., atom economy in catalyst design. The likelihood of existence of the most stable Cu x Pd y (x + y = 4) clusters in the temperature range of 298-400 K is 100%. The composite Cu x Pd y /α-WC(0001) (x + y = 4), is a nontrivial system since 22 isomers are needed to completely describe its structural properties. Among the isomers, seven structures are necessary to represent Cu 3 Pd 1 /α-WC(0001), five for Pd 4 /α-WC(0001), two for Cu 4 /α-WC(0001), and four for Cu 2 Pd 2 /α-WC(0001) and Cu 1 Pd 3 /α-WC(0001). The large number of cluster isomers supported on the tungsten carbide surface opens the door for several applications in the heterogeneous catalysis of the Cu x Pd y /α-WC(0001) composite, with the possibility of modulating the geometric, electronic, and chemical properties according to a desired application. Test studies for the adsorption of CO 2 indicate that the Cu x Pd y /α-WC(0001) composites are highly active for the adsorption and decomposition of the molecule, with bimetallic and admetal-carbide interactions playing a key role in the binding performance. In conclusion, this high activity indicates that these systems should be useful as catalysts for the conversion of CO 2 to oxygenates or light alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Effects of substrate misorientation and background impurities on electron transport in molecular-beam-epitaxial grown GaAs/AlGaAs modulation-doped quantum-well structures

The effects of substrate misorientation off the (001) plane and of background impurities on electron transport in MBE-grown GaAs/AlGaAs modulation-doped superlattice-buffered quantum-well structures were investigated. Low-field transport data were obtained on GaAs/AlGaAs structures grown on substrates oriented 0, 2, 4, and 6.5 deg off the (001) plane towards either (111)A or (111)B. It is shown that the low-field two-dimensional electron gas (2DEG) mobility is a function of the angle and direction of the substrate orientation, and that the 2DEG mobility is a function of the direction of the applied electric field in the GaAs quantum well. The anisotropy in the 2DEG mobility is also a function of the tilt angle and tilt azimuth direction of the substrate from the (001) plane. In addition, it is shown that the amount of interface scattering from the inverted interface is a sensitive function of the amount of background impurities in the MBE machine.

Radulescu, D. C.↗