Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Transport of coexisting Ni-Cu sulfide liquid and silicate melt in partially molten peridotite

Transport of coexisting sulfide and silicate melts in partially molten peridotite contributes to the redistribution of chalcophile elements within the upper mantle as well as the genesis of magmatic Ni-Cu sulfide deposits, but has not been investigated systematically. Using laboratory experiments, theoretical calculations, and X-ray synchrotron microtomography, this study documents the topology and considers controls on the extraction of two immiscible liquids during partial melting of mantle peridotite. Under hydrostatic conditions, the measured dihedral angle at silicate melt-mineral-mineral junctions is 13.7–21.3°. Silicate melt is distributed along grain edges forming incompletely interconnected melt channels that disconnected by some dead ends at melt fractions ~7–9 vol%. Application of theoretically predicted permeability (k ~10 -14 -10 -16 m 2 ) permits estimation of the extraction velocity of silicate melt of 0.7-11.1 μm/day within a single interconnected melt channel. In the absence of silicate melt, isolated sulfide droplets (3.77 vol%) show a sulfide-olivine-olivine dihedral angle of 91.5–101.3°. However, in the presence of silicate melt, sulfide droplets (average size ~2.53±2.14μm, 1σ) are partially surrounded by silicate melt and stranded in triple junctions or melt pockets due to the limitation of the smallest dimension (0.3μm) of melt channels. Thus, the extraction of sulfide liquid is highly restricted by these dead ends and the smallest dimension of melt channels during porous flow of silicate melt. In contrast, during large-strain shear deformation (strain ~1.6–2.5), initially stranded sulfide droplets were elongated and extracted with silicate melt into liquid-rich sheets with a length of several hundred microns, constantly oriented at 14.3±4.5°to the shear plane and antithetic to the shear direction. The angle is lower than that (18-30°) of those sheets containing sulfide liquid only, indicating that silicate melt dominates liquid-rich sheets. Driven by stress, silicate melt-dominated liquid-rich sheets open the appropriately oriented grain boundaries between silicate minerals, thus providing an efficient pathway for the extraction of sulfide liquid during deformation. When such sheet-like channels remain open, sulfide droplets (> millimeter-scale) can be potentially mobile through high strain domains of the upper mantle, contributing to the addition of chalcophile elements and the fertilization of the lithospheric mantle.

high P-T experiment↗
DOE OSTI2023

Strong effect of liquid Fe–S on elastic wave velocity of olivine aggregate: Implication for the low velocity anomaly at the base of the lunar mantle

The origin of the seismic low velocity zone (LVZ) observed at the base of the lunar mantle is important for understanding the nature of the lunar mantle. Liquid Fe–S is considered as a possible candidate of the cause of the LVZ. However, effect of liquid Fe–S on elastic wave velocity of mantle rock has been considered to be minor, according to theoretical estimation based on the high dihedral angle of liquid Fe–S in olivine aggregate observed in previous microstructural analysis of polished sample cross sections. Here, in this work, we carry out direct measurements of elastic wave velocities of liquid Fe–S-bearing olivine aggregate and report strong reduction of the elastic wave velocities in the presence of liquid Fe–S. The effects of liquid Fe–S in olivine aggregates are much more pronounced than the theoretical estimation. Three-dimensional X-ray microtomography analysis reveals that the geometry of liquid Fe–S strongly depends on the size, with larger liquid Fe–S blobs having low aspect ratios, which may predominantly affect elastic wave velocity. Since smaller spherical Fe–S blobs are much more abundant than the larger elongated blobs, conventional dihedral angle analyses based on scanning electron microscope images tend to statistically over-sample smaller blobs and under-sample larger blobs. Our results suggest that the LVZ at the base of the lunar mantle can be explained by the presence of 4.3–5.0 vol.% liquid Fe–S. The LVZ may be a hidden reservoir of highly siderophile elements (HSEs), which may explain the low abundance of HSEs in the lunar mantle compared to the Earth.

58 GEOSCIENCES↗
DOE OSTI2021

Tritium embrittlement of austenitic stainless-steel tubing at low helium contents

Austenitic stainless steels are the standard materials for containment of hydrogen and tritium because of their resistance to mechanical property degradation in those environments. The mechanical performance of the primary containment material is critical for tritium handling, processing, and storage, thus comprehensive understanding of the processes of tritium embrittlement is an enabling capability for fusion energy. This work describes the investigation of the effects of low levels of tritium-decay-helium ingrowth on 304 L tubes. Long-term aging with tritium leads to high helium contents in austenitic stainless steels and can reduce fracture toughness by 95 %, but the details of behavior at low helium contents are not as well characterized. Here, we present results from tensile testing of tritium pre-charged 304 L tube specimens with a variety of starting microstructures that all contain a low level of helium. The results of the tritium exposed-and-aged materials are compared to previously reported results on similar specimens tested in an unexposed condition as well as the hydrogen precharged condition. Tritium precharging and aging for a short duration resulted in increased yield strengths, ultimate tensile strengths and slightly increased elongation to failure, comparable to higher concentrations of hydrogen precharging.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Brazing characteristics, microstructure, and wettability of laser powder bed fusion additive manufactured GRCop-84 compared to CuCrZr and OFC, and brazing to titanium-zirconium-molybdenum alloy limiters

Laser Powder Bed Fusion (L-PBF) of Glenn Research Copper 84 (GRCop-84), a Cr 2 Nb (8 at. % Cr, 4 at. % Nb) precipitation hardened alloy, produces a fully dense, high conductivity alloy with a yield strength of 500 MPa and ultimate tensile strength (UTS) of 740 MPa with 20% elongation; superior to other competing copper alloys. Braze wetting characteristics of GRCop-84 with Ag-Cu-X, and Au-Cu brazes were similar to CuCrZr, but less than oxygen free copper. No difference in wetting was observed between infill and surface contour areas in L-PBF GRCop-84. Wet sanding to 240 grit (R a =0.24 µm) was considered the optimal surface condition. Silver diffusing through GRCop-84 depleted Cr 2 Nb precipitates from the copper grain and deposited agglomerations of coarsened precipitates within silver-rich regions of intergranular diffusion once a density threshold was reached. Microstructure modification was minimized with 50Au-50Cu braze implying that silver caused precipitate coarsening and agglomeration, and not high temperature exposure. Coarsened precipitates were observed on the surface within braze pools implying a contribution to braze wetting. Palcusil-25, Ticusil, CuSil-ABA, and 50Au-50Cu brazes were suitable for brazing to unplated Titanium-Zirconium-Molybdenum (TZM), while sulfamate nickel plating to allows wetting with CuSil or other non-active brazes. Additionally, vacuum brazing techniques were developed to join a 1 mm thick layer of TZM to the front of additive manufactured GRCop-84 waveguides considering the brazing characteristics of both GRCop-84, TZM, and internal stress from the difference in coefficient in thermal expansion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Plasma shape and position control development for NSTX-U using the GSEvolve plasma simulator

NSTX-U discharges have been reproduced using the GSEvolve plasma simulator in order to improve their control and reduce oscillations during the plasma current (Ip) ramp-up phase, and with the ultimate goal of enabling reliable H-mode access with a double-null shape at high elongation, low internal inductance, and high plasma performance. The control objective is to eliminate undesired oscillations in the plasma shape and vertical position that start when the plasma diverts during the Ip ramp-up phase, and that happened recurrently during the first NSTX-U experimental campaign. Model-based control solutions have been developed, including alternative H-mode access recipes and a Multi-Input Multi-Output (MIMO) decoupling controller. These solutions have demonstrated their capability to reduce or eliminate the aforementioned oscillations in GSEvolve simulations, enabling reproducible H-mode access. The results of this work aim to inform NSTX-U experimental operations on potential control developments to maximize its scientific output, and highlight the powerful capabilities of high-fidelity control-simulation frameworks like GSEvolve.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Influence of microstructure on replacement and porosity generation during experimental dolomitization of limestones

Replacement reactions commonly alter the multiscale pore structures of rocks during fluid-rock interactions. Analysis of these processes in various model fluid-rock systems during controlled laboratory experiments provides insights into the origins of microstructures found in natural materials. This study focused on understanding the effects of initial starting material permeability and resultant differences in transport pathways on porosity and mineralogical changes during limestone dolomitization.A series of replacement experiments (32–317 days in duration) have been conducted in which 1.59 cm (5/8 in.) diameter cores of two different limestones were reacted with saturated MgCl2 solutions at 200 °C. The Texas Cream (Austin Chalk) is a high-porosity, high-permeability limestone, whereas both the porosity and permeability of the Carthage Marble (Burlington Limestone) are relatively low. Altered limestones were imaged using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Time-of-Flight Secondary Ion Mass Spectrometry (ToF–SIMS) and electron microprobe analysis (EMPA). A representative grain boundary of the low-porosity limestone was targeted for a focused ion beam (FIB) lift-out and characterized using transmission electron microscopy (TEM). These results were coupled with analyses of radial changes in the porosity distribution of the core derived from X-ray and neutron small- and ultra-small angle scattering ((U)SANS/(U)SAXS).The high-porosity/permeability limestone showed a four times faster bulk replacement rate than the lower-porosity/permeability material, and a different mechanism of porosity development. For the low-porosity limestone, a two-stage replacement occurred, with the reacted region of the core consisting of an inner rim in which the limestone was replaced by two calcite-dolomite solid solutions, and an outer rim in which the dolomite was replaced by magnesite. Elongated pores formed along grain boundaries at the initial limestone/dolomite reaction interface, and additional nanometer-scale porosity was formed at the secondary magnesite replacement rim. Grain boundaries were identified as preferential pathways for transport leading to dolomitization and a grain boundary diffusion rate was calculated based on microstructural characterization. In contrast, replacement in the high-porosity limestone was accompanied by porosity generation through replacement of individual grains by dolomite throughout the sample and, in longer runs, magnesite in outer parts of the core. These observations emphasize that both the mechanisms of the replacement reaction and the microstructure and chemistry of the replaced product are contingent on the initial structure of the starting material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Temperature statistics in a radiatively heated particle-laden turbulent square duct flow

Radiation absorption by preferentially concentrated particles in a turbulent square duct flow is studied experimentally. The particle-laden flow is exposed to near-infrared radiation, and the gas phase temperature statistics are measured along the wall bisector of the duct. It is found that the instantaneous temperature fluctuations are comparable to the overall mean temperature rise. The temperature statistics at the duct centerline and near the wall are qualitatively different. The former reflects preferential concentration in isotropic flows while the latter displays evidence of particle clustering into streamwise elongated streaks. Comparison of the experimental data to a simplified heat transfer model suggests that the Lagrangian evolution of particle clusters and voids, and turbulent mixing in the vicinity of particle clusters, are important. This work was motivated by particle solar receiver technology, but the findings are also relevant to systems where there is localized heat release or mass transfer from disperse particles or droplets. It shows that obtaining Lagrangian histories of particle trajectories is an important next step towards understanding thermal transport phenomena in particle-laden turbulent flows.

42 ENGINEERING↗
DOE OSTI2025

Coupled phase field damage and crystal plasticity analysis of intragranular fracture: The role of crystallographic orientation and voids

Damage evolution in engineering metal alloys at the grain scale exhibits significant microstructural heterogeneity and anisotropy. These heterogeneities create local hotspots for stress and strain localization, leading to void nucleation. Crystal orientation influences the active slip systems around voids, affecting lattice rotation and potentially forming discontinuities. At low triaxiality, voids may change shape due to lower stress, rotation, elongation, and coalescence. At high triaxiality, the correlation between crystal orientation and void growth rate becomes stronger, resembling the behavior observed in isolated single crystals. Therefore, understanding the effects of crystal orientation, heterogeneous strain, and defect evolution is crucial for single crystal fracture characterization. Here, in this work, a coupled phase-field damage (PFD) and crystal plasticity (CP) model is implemented within a finite element framework to analyze crystal deformation and failure. The CP method employs a dislocation density-based constitutive model, while intragranular failure is modeled using an anisotropic PFD method. The PFD model considers both the stored energy due to elastic stretching and the energy release due to defect formation and crack formation. A single crystal Al2219 with an intracrystalline spherical void is chosen to analyze fracture. The study finds that fracture propagation is strongly correlated with crystal orientations. This coupled CP-PFD model provides accurate failure prediction in crystalline materials by incorporating the effects of crystal orientations and existing voids. This study demonstrates how the local microstructure and defects influence plastic deformation and failure mechanisms in metal alloys.

Aluminum alloy↗
DOE OSTI2020

The physiochemical alteration of flax fibers structuring components after different scouring and bleaching treatments

Scouring and bleaching are essential steps in flax yarn production; however, in many cases, these treatments have relatively low selectivity on non-cellulosic polysaccharides (NCPs) and lignin. Herein, the specific chemical properties of flax fibers through a variety of scouring and/or bleaching procedures are reviewed to understand their correlations with the mechanical and morphological characteristics. The hydrolysis behaviors of hemicellulose and lignin are different from those of cellulose during chlorine-alkali-oxygen (Cl-AO), enzyme-alkali-oxygen (EAO), and alkali-oxygen (AO) treatments, while the structural hemicellulose polysaccharides fractions were not affected by acid pretreatment followed by alkali scouring (AA) treatment. It was found that the unbleached AA treatment improved scouring efficiency to the greatest extent by decreasing 73.3 % of hemicellulose content and 59.8 % of lignin content compared to the untreated flax fibers and obtained the highest tensile strength (6.58 cN/dtex) and elongation (3.73 %). Delignification was more crucial on fiber tenacity and fineness than hemicellulose removal (R 2 = 0.71, 0.79 vs R 2 = 0.46, 0.61). Within the hemicellulose fractions, a corresponding beneficial relationship between the xylan (XYL) composition and flax fiber properties is presented. The correlation of GM and GGM contents in hemicellulose with flax fiber length was significant with R 2 value 0.97 and 0.99, respectively. This work provides insight into the hydrolysis behavior of hemicellulose and a basis for developing scouring and/or bleaching models that can predict fiber properties.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Preparation and characterization of aminated co-solvent enhanced lignocellulosic fractionation lignin as a renewable building block for the synthesis of non-isocyanate polyurethanes

Lignin is a major bioresource from 2nd generation biorefinery process streams and from pulp and paper production that is still severely underutilized nowadays. Its natural polymeric and aromatic structures make it suitable as a potential building block for biopolymer production. Due to the growing environmental and health concerns over conventional polyurethane (PU) manufacturing processes that utilize toxic isocyanates, there is a great interest to develop a non-isocyanate PU (NIPU) route. Herein, we demonstrate a novel strategy that uses highly pure lignin isolated from co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment of poplar wood to produce biobased NIPUs. In this strategy, hardwood poplar is firstly fractionated via a CELF pretreatment to produce a clean lignin stream that is rich in phenolics. The CELF lignin was then aminated by a Mannich reaction, and the aminated CELF lignin was finally reacted with bicyclic carbonates to yield an advanced NIPU. In this work, the structure, mechanical, and thermal properties of these novel NIPUs were elucidated by FTIR, NMR, tensile test, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). The mechanical properties of these lignin based NIPUs could be tuned from highly rigid to elastic polymers by simply modifying the lignin constituents of the polymer. The thermal stabilities of NIPUs were improved because of the addition of aminated lignin, and NIPU containing 55 and 23 wt% lignin showed the highest tensile strength (~1.2 MPa) and elongation at break (~140%), respectively. The results obtained in this study demonstrate that the reaction of cyclic carbonate with aminated lignin represents an interesting pathway for the synthesizing of lignin based NIPU with a relative high lignin content.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Optimization of the microstructure and mechanical properties of electron beam welded high-strength medium-entropy alloy (NiCoCr) 94 Al 3 Ti 3

For this work, the weldability and effects of subsequent heat treatment on the microstructure and mechanical properties of the medium-entropy alloy (MEA) (NiCoCr) 94 Al 3 Ti 3 have been explored using electron beam welding (EBW). It was found that EBW joints consist of a supersaturated f.c.c. matrix with coarse, asymmetric columnar grains (17.7–24 μm). The fraction of twins and Σ3 n CSL boundaries in weld joints was only 10% of that in the base metal, a value which increased to 30% after aging at 800 °C. The aging also led to improvements in the hardness, tensile strength, and work hardening rate, a result of the precipitation of a high volume fraction (0.29–0.33) of ultrafine (15–17.4 nm dia.) coherent spherical L1 2 -structured particles. The contributions of the L1 2 nanoparticles and Hall-Petch strengthening to the yield strength were estimated to be 537–573 MPa and 105–123 MPa, respectively. The MEA shows excellent weldability and, after aging, good strength (YS~1098 MPa, UTS~1368 MPa) and elongation to failure (~11%) by ductile fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nickel B-site substitution in bulk Sr 1-x Ca x FeO 3 perovskite oxygen carriers: Benefits and limitations

We report oxygen (O 2 ) storage materials often rely on the presence of cobalt (Co) to reduce the thermodynamic penalty and increase the kinetics necessary for efficient O 2 storage and release. In this work, we investigate nickel (Ni) as an alternative B-site dopant in Sr 1-x Ca x FeO 3 to identify Co-free carriers that still show improved kinetics at low temperatures. In fact, we show a substantial increase in the reversible O2 release rate through mild Ni B-site substitution (y = 0.06) in select Sr 1-x Ca x Fe 1-y Ni y O 3 systems at 400 to 500 °C, reaching 2.00 wt.% O 2 release up to approximately 75% faster than Ni-free systems. To explain the role of Ni in these systems, we use density functional theory to calculate the O 2 vacancy (V O ) formation energy from separate metal-oxygen (M-O) bonding and relaxation components. We computationally show elongated Ni-O bonds are directly responsible for the decrease in V O upon Ni substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Directed energy deposition of radially functionally graded nickel based superalloys IN625 and IN738: Microstructure and mechanical properties

This study investigates the microstructure and mechanical properties of radially functionally graded (RFG) materials fabricated from nickel-based superalloys IN625 and IN738 using directed energy deposition (DED). RFG cylindrical deposits with radial gradients of IN625-IN738 and IN738-IN625 were successfully fabricated and confirmed to be crack-free through tailored composition grading, scan strategy and process parameters that minimized thermal gradients and solidification velocities. Microstructural analysis revealed distinct variations across the gradient, characterized by differences in dendrite arm spacing, microsegregation, and the formation of distinct γ' precipitates and carbide/boride phases (MC, M 6 C, M 2 C, and MB 2 ) in as-deposited (AD) conditions, which evolved into M 23 C 6 and M 2 B upon subsequent heat treatment (HT). EBSD showed predominant columnar grains with a [100] texture, while microhardness profiles demonstrated consistent variation across the gradients. Mechanical testing highlighted the synergy of the graded structure, combining IN738's strength with IN625's ductility, resulting in enhanced properties such as a yield strength of 1131 MPa, ultimate tensile strength of 1382 MPa, and elongation of 12 % for HT IN625-IN738 grading. Numerical simulations employing CALPHAD thermodynamic calculations and finite element thermal modeling are used to establish phase evolution and microstructural feature correlation with thermal profiles, aiding in the optimization of process-structure-property relationship.

Additive manufacturing↗
DOE OSTI2021

Bedrock architecture, soil texture, and hyporheic zone characterization combining electrical resistivity and induced polarization imaging

The shallow (<15 m depth) subsurface environment of a short reach along a bedrock stream was investigated with electrical resistivity and induced polarization (IP) to map details of bedrock and soil sediments. The bedrock is mostly comprised of limestone, and is generally resistive compared to the overlying soil. The soil-bedrock interface was determined through a trial and error approach using a sharp boundary feature in the inversion model. The inferred bedrock surface determined from the inversions exhibited undulating patterns with troughs and ridges. A near continuous trough ran alongside the stream within the floodplain, and is suggestive of a paleochannel among other interpretations of this feature. The structure of the electrical resistivity above the bedrock showed small-scale elongated features. The chargeability from the IP method showed larger scale features. High values of chargeability were associated with the sediments in the floodplain, and low values were associated with bedrock, stream, and soil on the elevated banks above the stream. If the chargeability is associated with membrane polarization characteristic of clayey soils, then IP seems to highlight the mere existence of clay, while the resistivity may be more discernable of the relative proportion of clay. Vegetation differences may also explain the chargeability distribution, where parts of the survey with high chargeability had dense pine with no understory making the soils more organically rich.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Amorphous 1-D nanowires of calcium phosphate/pyrophosphate: A demonstration of oriented self-growth of amorphous minerals

Amorphous inorganic solids are traditionally isotropic, thus, it is believed that they only grow in a non-preferential way without the assistance of regulators, leading to the morphologies of nanospheres or irregular aggregates of nanoparticles. However, in the presence of (ortho)phosphate (Pi) and pyrophosphate ions (PPi) which have synergistic roles in biomineralization, the highly elongated amorphous nanowires (denoted ACPPNs) form in a regulator-free aqueous solution (without templates, additives, organics, etc). Based on thorough characterization and tracking of the formation process (e.g., Cryo-TEM, spherical aberration correction high resolution TEM, solid state NMR, high energy resolution monochromated STEM-EELS), the microstructure and its preferential growth behavior are elucidated. In ACPPNs, amorphous calcium orthophosphate and amorphous calcium pyrophosphate are distributed at separated but close sites. The ACPPNs grow via either the preferential attachment of ~2 nm nanoclusters in a 1-dimension way, or the transformation of bigger nanoparticles, indicating an inherent driving force-governed process. Here, we propose that the anisotropy of ACPPNs microstructure, which is corroborated experimentally, causes their oriented growth. This study proves that, unlike the conventional view, amorphous minerals can form via oriented growth without external regulation, demonstrating a novel insight into the structures and growth behaviors of amorphous minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Surrogate approximation of the Grad–Shafranov free boundary problem via stochastic collocation on sparse grids

In magnetic confinement fusion devices, the equilibrium configuration of a plasma is determined by the balance between the hydrostatic pressure in the fluid and the magnetic forces generated by an array of external coils and the plasma itself. The location of the plasma is not known a priori and must be obtained as the solution to a free boundary problem. The partial differential equation that determines the behavior of the combined magnetic field depends on a set of physical parameters (location of the coils, intensity of the electric currents going through them, magnetic permeability, etc.) that are subject to uncertainty and variability. The confinement region is in turn a function of these stochastic parameters as well. In this work, we consider variations on the current intensities running through the external coils as the dominant source of uncertainty. This leads to a parameter space of dimension equal to the number of coils in the reactor. With the aid of a surrogate function built on a sparse grid in parameter space, a Monte Carlo strategy is used to explore the effect that stochasticity in the parameters has on important features of the plasma boundary such as the location of the x-point, the strike points, and shaping attributes such as triangularity and elongation. Furthermore, the use of the surrogate function reduces the time required for the Monte Carlo simulations by factors that range between 7 and over 30.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Synergistic double-atom catalysts of metal-boron anchored on g-C 2 N for electrochemical nitrogen reduction: Mechanistic insight and catalyst screening

The rational design of a novel catalytic center with a sound basis remains both challenging and rewarding for the electrochemical reduction of N 2 (eNRR), which has provided a feasible route for achieving clean and sustainable NH 3 production under ambient conditions. Herein, using density functional theory calculations, we demonstrate that hybrid metal (M)-boron (B) double-atom catalysts (DACs) embedded in g-C 2 N substrate (M-B@C 2 N, M = 3d, 4d and 5d transition metals) can achieve both high catalytic activity and high selectivity in eNRR. The proposed M-B@C 2 N DACs have exhibited impressive feasibility and stability thanks to the resilient and robust C 2 N substrate with abundant pyridinic N atoms distributed among right-sized pore structures. Our results reveal that like the metal center, the embedded B atom can actively involve in Ntriple bondN bond activation via π*-backdonation mechanism concomitant with the substantial charge transfer to adsorbed *N 2 , leading to sizable Nsingle bondN bond elongation. Accordingly, both adsorption energy and Nsingle bondN bond length of *N 2 can be employed as catalytic descriptors for predicting eNRR activity in terms of the limiting potentials (UL). Using high-throughput screening method, we found that six M-B@C 2 N candidates have stood out as the outstanding electrocatalysts for driving eNRR, namely, M = Ti (U L = 0 V), Mo (U L = 0 V), Nb (U L = -0.04 V), W (U L = -0.23 V), Zr (U L = -0.26 V), V (U L = -0.28 V). The underlying origin is attributed to the balanced and constrained N-affinity of M-B dual site working in synergy, which can thus be used as one important guide of catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗