Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Physical mechanism causing rapid changes in ultrarelativistic electron pitch angle distributions right after a shock arrival: Evaluation of an electron dropout event: Drift Shell Splitting on the Dayside

Three mechanisms have been proposed to explain relativistic electron flux depletions (dropouts) in the Earth's outer radiation belt during storm times: adiabatic expansion of electron drift shells due to a decrease in magnetic field strength, magnetopause shadowing and subsequent outward radial diffusion, and precipitation into the atmosphere (driven by EMIC wave scattering). Which mechanism predominates in causing electron dropouts commonly observed in the outer radiation belt is still debatable. In the present study, we evaluate the physical mechanism that may be primarily responsible for causing the sudden change in relativistic electron pitch angle distributions during a dropout event observed by Van Allen Probes during the main phase of the 27 February 2014 storm. During this event, the phase space density of ultrarelativistic (>1MeV) electrons was depleted by more than 1 order of magnitude over the entire radial extent of the outer radiation belt (3 < L* < 5) in less than 6 h after the passage of an interplanetary shock. We model the electron pitch angle distribution under a compressed magnetic field topology based on actual solar wind conditions. Although these ultrarelativistic electrons exhibit highly anisotropic (peaked in 90°), energy-dependent pitch angle distributions, which appear to be associated with the typical EMIC wave scattering, comparison of the modeled electron distribution to electron measurements indicates that drift shell splitting is responsible for this rapid change in electron pitch angle distributions. This further indicates that magnetopause loss is the predominant cause of the electron dropout right after the shock arrival.

58 GEOSCIENCES↗

Electron Accelerator Shielding Design of KIPT Neutron Source Facility

The Argonne National Laboratory of the United States and the Kharkov Institute of Physics and Technology of the Ukraine have been collaborating on the design, development and construction of a neutron source facility at Kharkov Institute of Physics and Technology utilizing an electron-accelerator-driven subcritical assembly. The electron beam power is 100 kW using 100-MeV electrons. The facility was designed to perform basic and applied nuclear research, produce medical isotopes, and train nuclear specialists. The biological shield of the accelerator building was designed to reduce the biological dose to less than 5.0e-03 mSv/h during operation. The main source of the biological dose for the accelerator building is the photons and neutrons generated from different interactions of leaked electrons from the electron gun and the accelerator sections with the surrounding components and materials. The Monte Carlo N-particle extended code (MCNPX) was used for the shielding calculations because of its capability to perform electron-, photon-, and neutron-coupled transport simulations. The photon dose was tallied using the MCNPX calculation, starting with the leaked electrons. However, it is difficult to accurately tally the neutron dose directly from the leaked electrons. The neutron yield per electron from the interactions with the surrounding components is very small, similar to 0.01 neutron for 100-MeV electron and even smaller for lower-energy electrons. This causes difficulties for the Monte Carlo analyses and consumes tremendous computation resources for tallying the neutron dose outside the shield boundary with an acceptable accuracy. To avoid these difficulties, the SOURCE and TALLYX user subroutines of MCNPX were utilized for this study. The generated neutrons were banked, together with all related parameters, for a subsequent MCNPX calculation to obtain the neutron dose. The weight windows variance reduction technique was also utilized for both neutron and photon dose calculations. Two shielding materials, heavy concrete and ordinary concrete, were considered for the shield design. The main goal is to maintain the total dose outside the shield boundary less than 5.0e-03 mSv/h during operation. The shield configuration and parameters of the accelerator building were determined and are presented in this paper. Copyright (C) 2016, Published by Elsevier Korea LLC on behalf of Korean Nuclear Society.

43 PARTICLE ACCELERATORS↗

ELECTRON HEATING BY THE ION CYCLOTRON INSTABILITY IN COLLISIONLESS ACCRETION FLOWS. I. COMPRESSION-DRIVEN INSTABILITIES AND THE ELECTRON HEATING MECHANISM

In systems accreting well below the Eddington rate, such as the central black hole in the Milky Way (Sgr A*), the plasma in the innermost regions of the disk is believed to be collisionless and have two temperatures, with the ions substantially hotter than the electrons. However, whether a collisionless faster-than-Coulomb energy transfer mechanism exists in two-temperature accretion flows is still an open question. We study the physics of electron heating during the growth of ion velocity-space instabilities by means of multidimensional, fully kinetic, particle-in-cell (PIC) simulations. A background large-scale compression—embedded in a novel form of the PIC equations—continuously amplifies the field. This constantly drives a pressure anisotropy P > P {sub ∥} because of the adiabatic invariance of the particle magnetic moments. We find that, for ion plasma beta values β{sub 0i} ∼ 5-30 appropriate for the midplane of low-luminosity accretion flows (here, β{sub 0i} is the ratio of ion thermal pressure to magnetic pressure), mirror modes dominate if the electron-to-proton temperature ratio is T {sub 0e}/T {sub 0i} ≳ 0.2, whereas for T {sub 0e}/T {sub 0i} ≲ 0.2 the ion cyclotron instability triggers the growth of strong Alfvén-like waves, which pitch-angle scatter the ions to maintain marginal stability. We develop an analytical model of electron heating during the growth of the ion cyclotron instability, which we validate with PIC simulations. We find that for cold electrons (β{sub 0e} ≲ 2 m{sub e} /m{sub i} , where β{sub 0e} is the ratio of electron thermal pressure to magnetic pressure), the electron energy gain is controlled by the magnitude of the E-cross-B velocity induced by the ion cyclotron waves. This term is independent of the initial electron temperature, so it provides a solid energy floor even for electrons starting with extremely low temperatures. On the other hand, the electron energy gain for β{sub 0e} ≳ 2 m{sub e} /m{sub i} —governed by the conservation of the particle magnetic moment in the growing fields of the instability—is proportional to the initial electron temperature, and it scales with the magnetic energy of ion cyclotron waves. Our results have implications for two-temperature accretion flows as well as for solar wind and intracluster plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron Capture and Loss Processes in Forward Electron Emission in Fast Ion-atom Collisions

Forward-going continuum electron emission has been investigated in 0.4-2 MeV/u O{sup 7+} and O{sup 8+}+He collisions. The one and two-electron processes of electron capture to the continuum (ECC), electron loss to the continuum (ELC), and transfer ionization (TI) have been separated by detecting cusp electrons in coincidence with the outgoing charge states of the projectile ions. The data are compared to earlier results of Zhu et al. for the O{sup 7+}+Ar collision system. The relative importance of the different contributions to forward electron emission and the role of the electron-electron interaction are discussed. The relationships of these results to recent studies of radiative-electron-capture-to-the continuum (RECC) are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

X-ray Emission from Electron Betatron Motion in a Laser-Plasma Accelerator

Single-shot x-ray spectra from electron bunches produced by a laser-plasma wakefield accelerator (LPA) were measured using a photon-counting single-shot pixelated Silicon-based detector [3], providing for the first time direct spectra without assumptions required by filter based techniques. In addition, the electron bunch source size was measured by imaging a wire target, demonstrating few micron source size and stability. X-rays are generated when trapped electrons oscillate in the focusing field of the wake trailing the driver laser pulse. In addition to improving understanding of bunch emittance and wake structure, this provides a broadband, synchronized femtosecond source of keV x-rays. Electron bunch spectra and divergence were measured simultaneously and preliminary analysis shows correlation between x-ray andelectron spectra. Bremsstrahlung background was managed using shielding and magnetic diversion.

43 PARTICLE ACCELERATORS↗

Fluctuations in electron-positron plasmas: Linear theory and implications for turbulence

Linear kinetic theory of electromagnetic fluctuations in a homogeneous, magnetized, collisionless electron-positron plasma predicts two lightly damped modes propagate at relatively long wavelengths: an Alfven-like mode with dispersion {omega}{sub r}=k{sub ||}v-tilde{sub A} and a magnetosonic-like mode with dispersion {omega}{sub r}{approx_equal}kv-tilde{sub A} if {beta}{sub e}<<1. Here v-tilde{sub A} is the Alfven speed in an electron-positron plasma and || refers to the direction relative to the background magnetic field B{sub o}. Both modes have phase speeds {omega}{sub r}/k which monotonically decrease with increasing wavenumber. The Alfven-like fluctuations are almost incompressible, but the magnetosonic-like fluctuations become strongly compressible at short wavelengths and propagation sufficiently oblique to B{sub o}. Using the linear dispersion properties of these modes, scaling relations are derived which predict that turbulence of both modes should be relatively anisotropic, with fluctuating magnetic energy preferentially cascading in directions perpendicular to B{sub o}. Turbulent spectra in the solar wind show two distinct power-law regimes separated by a distinct breakpoint in observed frequency; this characteristic should not be present in electron-positron turbulence because of the absence of whistler-like dispersion. Linear theory properties of the cyclotron and mirror instabilities driven by either electron or positron temperature anisotropies are generally analogous to those of the corresponding instabilities in electron-proton plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron- and positron-proton elastic scattering in CLAS

There is a significant disagreement between measurements of the proton electric form factor, G{sup p}{sub E}, using Rosenbluth separations and polarization transfer. This disagreement, if not explained, could pose a fundamental challenge to our understanding of electron scattering or proton structure. Two-photon exchange (TPE) processes, although not fully calculable, are the most likely explanation of this disagreement. We will definitively test this assertion by comparing the electron-proton and positron-proton elastic scattering cross section in the Jefferson Lab CLAS. We will make a mixed identical electron and positron tertiary beam by passing a 5.5 GeV primary electron beam through a radiator to make a photon beam and then passing the photon beam through a converter to make electron-positron pairs. Measuring the elastic cross sections simultaneously using identical lepton beams should significantly reduce systematic uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of electron-phonon coupling and electron diffusion on ripples growth on ultrafast-laser-irradiated metals

Metals exposed to ultrafast laser irradiation close to ablative regimes show often a submicron-scale (near 0.5 {mu}m) periodic organization of the surface as ripples. Using two classes of metallic materials (transition and noble), we have determined that the ripples amplitude is strongly correlated to the material transport properties, namely electron-phonon relaxation strength, electronic diffusion, and to the energy band characteristics of the electronic laser excitation. This particularly depends on the topology of the electronic structure, including d-band effects on electronic excitation. Comparing the effects of electron-phonon nonequilibrium lifetimes for the different metals under similar irradiation conditions, we indicate how the electron-phonon coupling strength affects the electronic thermal diffusion, the speed of phase transformation and impacts on the ripples contrast. The highest contrast is observed for ruthenium, where the electron-phonon coupling is the strongest, followed by tungsten, nickel, and copper, the latter with the least visible contrast. The dependence of surface patterns contrast with fluence is linked to the dependence of the relaxation characteristics with the electronic temperature.

36 MATERIALS SCIENCE↗

Water network-mediated, electron-induced proton transfer in [C{sub 5}H{sub 5}N ⋅ (H{sub 2}O){sub n}]{sup −} clusters

The role of proton-assisted charge accommodation in electron capture by a heterocyclic electron scavenger is investigated through theoretical analysis of the vibrational spectra of cold, gas phase [Py ⋅ (H{sub 2}O){sub n=3−5}]{sup −} clusters. These radical anions are formed when an excess electron is attached to water clusters containing a single pyridine (Py) molecule in a supersonic jet ion source. Under these conditions, the cluster ion distribution starts promptly at n = 3, and the photoelectron spectra, combined with vibrational predissociation spectra of the Ar-tagged anions, establish that for n > 3, these species are best described as hydrated hydroxide ions with the neutral pyridinium radical, PyH{sup (0)}, occupying one of the primary solvation sites of the OH{sup −}. The n = 3 cluster appears to be a special case where charge localization on Py and hydroxide is nearly isoenergetic, and the nature of this species is explored with ab initio molecular dynamics calculations of the trajectories that start from metastable arrangements of the anion based on a diffuse, essentially dipole-bound electron. These calculations indicate that the reaction proceeds via a relatively slow rearrangement of the water network to create a favorable hydration configuration around the water molecule that eventually donates a proton to the Py nitrogen atom to yield the product hydroxide ion. The correlation between the degree of excess charge localization and the evolving shape of the water network revealed by this approach thus provides a microscopic picture of the “solvent coordinate” at the heart of a prototypical proton-coupled electron transfer reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of fast drifting electrons on electron temperature measurement with a triple Langmuir probe

Triple Langmuir Probe (TLP) is a widely used diagnostics for instantaneous measurement of electron temperature and density in low temperature laboratory plasmas as well as in edge region of fusion plasma devices. Presence of a moderately energetic flowing electron component, constituting only a small fraction of the bulk electrons, is also a generally observed scenario in plasma devices, where plasmas are produced by electron impact ionization of neutrals. A theoretical analysis of its effect on interpretation of the TLP data for bulk electron temperature measurement is presented here assuming electron velocity distribution is not deviating substantially from a Maxwellian. The study predicts conventional expression from standard TLP theory to give overestimated value of bulk electron temperature. Correction factor is significant and largely depends on population density, temperature, and energy of the fast component. Experimental verification of theoretical results is obtained in the magnetized plasma linear experimental device of Saha Institute of Nuclear Physics where plasma is produced by an electron cyclotron resonance method and known to have a fast flowing electron component.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of electron–electron interactions on optical properties of GaN/AlN quantum wells: a nonlinear Schrödinger equation approach

Researchers usually neglect the electron–electron interaction effect when they study the optical properties of semiconducting nanostructures through the compact density matrix approach. In the existing papers, this work has also been done through self-consistent solution of the Schrödinger and Poisson equations. For the first time, we have investigated the electronic and optical properties of wurtzite GaN/AlN quantum wells in the presence of electron–electron interactions assuming weak electron–electron scattering through a numerical solution of a nonlinear Schrödinger equation. It is shown that the electron–electron interaction effect leads to the removal of the N-fold degeneracy in the energy levels of N-well multiple quantum well systems. Effects of different parameters such as electric field, the strength of the electron–electron interaction, a total length of the system and also two different numbers of wells (1 and 2) on the mentioned optical properties have been investigated. Also, we observed redshifts in the optical rectification coefficient peak positions when the nonlinear parameter increased. Finite difference self-consistent method was employed to solve the nonlinear Schrödinger equation and we demonstrated the method convergence. Finally, we illustrated the accuracy of the method by comparing our energy values with those of the Sinc method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low energy electron magnetometer using a monoenergetic electron beam

A low energy electron beam magnetometer utilizes near-monoenergetic electrons thereby reducing errors due to electron energy spread and electron nonuniform angular distribution. In a first embodiment, atoms in an atomic beam of an inert gas are excited to a Rydberg state and then electrons of near zero energy are detached from the Rydberg atoms. The near zero energy electrons are then accelerated by an electric field V(acc) to form the electron beam. In a second embodiment, a filament emits electrons into an electrostatic analyzer which selects electrons at a predetermined energy level within a very narrow range. These selected electrons make up the electron beam that is subjected to the magnetic field being measured.

Singh, J. J.↗

Disabling CNT Electronic Devices by Use of Electron Beams

Bombardment with tightly focused electron beams has been suggested as a means of electrically disabling selected individual carbon-nanotubes (CNTs) in electronic devices. Evidence in support of the suggestion was obtained in an experiment in which a CNT field-effect transistor was disabled (see figure) by focusing a 1-keV electron beam on a CNT that served as the active channel of a field-effect transistor (FET). Such bombardment could be useful in the manufacture of nonvolatile-memory circuits containing CNT FETs. Ultimately, in order to obtain the best electronic performances in CNT FETs and other electronic devices, it will be necessary to fabricate the devices such that each one contains only a single CNT as an active element. At present, this is difficult because there is no way to grow a single CNT at a specific location and with a specific orientation. Instead, the common practice is to build CNTs into electronic devices by relying on spatial distribution to bridge contacts. This practice results in some devices containing no CNTs and some devices containing more than one CNT. Thus, CNT FETs have statistically distributed electronic characteristics (including switching voltages, gains, and mixtures of metallic and semiconducting CNTs). According to the suggestion, by using a 1-keV electron beam (e.g., a beam from a scanning electron microscope), a particular nanotube could be rendered electrically dysfunctional. This procedure could be repeated as many times as necessary on different CNTs in a device until all of the excess CNTs in the device had been disabled, leaving only one CNT as an active element (e.g., as FET channel). The physical mechanism through which a CNT becomes electrically disabled is not yet understood. On one hand, data in the literature show that electron kinetic energy >86 keV is needed to cause displacement damage in a CNT. On the other hand, inasmuch as a 1-keV beam focused on a small spot (typically a few tens of nanometers wide) deposits a significant amount of energy in a small volume, the energy density may suffice to thermally induce structural and/or electronic changes that disable the CNT. Research may be warranted to investigate this effect in detail.

Petkov, Mihail↗

Measurement of the full electron spectrum associated with the Ag N 3 VV Auger transitions: Evidence for the contribution of multi-electron Auger processes

In this paper, we report the first measurement of the full energy spectrum (down to 0 eV) of electrons emitted from the surface of Ag(100) as a result of the N 3 VV Auger transition. A comparison with a Monte-Carlo model was used to obtain an estimate of the contribution of multi-electron Auger processes to the low energy part of the Auger spectrum. The experimental Auger spectrum was obtained in time coincidence with photo-emitted 4p 3/2 core electrons from Ag using Auger-Photoelectron coincidence spectroscopy (APECS). The coincidence condition in APECS can remove most, but not all, spectral contributions from events unrelated to the Auger transition. The remaining contributions to the APECS spectrum from Auger-unrelated events, which are significant, were determined from a series of coincidence measurements of inelastically scattered valence band photoelectrons. The contribution from Auger-unrelated events was subtracted from the APECS Auger spectrum of Ag(100) to obtain the full Auger spectrum down to 0 eV. The resulting spectrum includes, in addition to Auger electrons emitted without energy loss, inelastically scattered Auger electrons. We observe that the spectral weight of the low energy tail (LET) in the APECS spectrum is reduced by more than a factor of two after subtracting the Auger-unrelated contributions. However, the intensity of the LET after this subtraction is still two times the integrated intensity in the Auger peak. A Monte Carlo model that includes the inelastic transport of the N 3 VV Auger electrons through the surface showed that LET produced by the inelastic scattering of the Auger electrons has the same intensity as the integrated intensity in the Auger peak. The excess intensity in the experimental LET provides strong evidence that the Auger related spectrum also includes contribution from multiple electron emissions that are intrinsic to the creation and/or the Auger decay of the core hole. In conclusion, our estimate shows that as low as 20% to as high as 60% of the core hole decay events result in the emission of more than one Auger electron from Ag (100). This result demonstrates the need for a better understanding of the contribution of valence-electron correlations to the entire CVV Auger spectrum down to 0 eV.

36 MATERIALS SCIENCE↗

JLAB Electron Driver Capabilities

Several schemes have been proposed for adding a positron beam option at the Continuous Electron Beam Facility (CEBAF) at Jefferson Laboratory (JLAB). They involve using a primary beam of electrons or gamma rays striking a target to produce a positron beam. At JLAB electron beams are produced and used in two different accelerators, CEBAF and the JLAB FEL (Free Electron Laser). Both have low emittance and energy spread. The CEBAF beam is polarized. The FEL beam is unpolarized but the injector can produce a higher current electron beam. In this paper we describe the characteristics of these beams and the parameters relevant for positron production.

43 PARTICLE ACCELERATORS↗

Fast wave direct electron heating in advanced inductive and ITER baseline scenario discharges in DIII-D

Fast Wave (FW) heating and electron cyclotron heating (ECH) are used in the DIII-D tokamak to study plasmas with low applied torque and dominant electron heating characteristic of burning plasmas. FW heating via direct electron damping has reached the 2.5 MW level in high performance ELMy H-mode plasmas. In Advanced Inductive (AI) plasmas, core FW heating was found to be comparable to that of ECH, consistent with the excellent first-pass absorption of FWs predicted by ray-tracing models at high electron beta. FW heating at the ∼2 MW level to ELMy H-mode discharges in the ITER Baseline Scenario (IBS) showed unexpectedly strong absorption of FW power by injected neutral beam (NB) ions, indicated by significant enhancement of the D-D neutron rate, while the intended absorption on core electrons appeared rather weak. The AI and IBS discharges are compared in an effort to identify the causes of the different response to FWs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast response of electron-scale turbulence to auxiliary heating cessation in National Spherical Torus Experiment

In this letter, we report the first observation of the fast response of electron-scale turbulence to auxiliary heating cessation in National Spherical Torus eXperiment [Ono et al., Nucl. Fusion 40, 557 (2000)]. The observation was made in a set of RF-heated L-mode plasmas with toroidal magnetic field of 0.55 T and plasma current of 300 kA. It is observed that electron-scale turbulence spectral power (measured with a high-k collective microwave scattering system) decreases significantly following fast cessation of RF heating that occurs in less than 200 μs. The large drop in the turbulence spectral power has a short time delay of about 1–2 ms relative to the RF cessation and happens on a time scale of 0.5–1 ms, much smaller than the energy confinement time of about 10 ms. Power balance analysis shows a factor of about 2 decrease in electron thermal diffusivity after the sudden drop of turbulence spectral power. Measured small changes in equilibrium profiles across the RF cessation are unlikely able to explain this sudden reduction in the measured turbulence and decrease in electron thermal transport, supported by local linear stability analysis and both local and global nonlinear gyrokinetic simulations. The observations imply that nonlocal flux-driven mechanism may be important for the observed turbulence and electron thermal transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using an energized oxygen micro-jet for improved graphene etching by focused electron beam

We report on an improved Focused Electron Beam Induced Etching (FEBIE) process, which exploits heated oxygen delivery via a continuous supersonic micro-jet resulting in faster graphene patterning and better etch feature definition. Positioning a micro-jet in close proximity to a graphene surface with minimal jet spreading due to a continuous regime of gas flow at the exit of the 10 μm inner diameter capillary allows for focused exposure of the surface to reactive oxygen at high mass flux and impingement energy of a supersonic gas stream localized to a small etching area exposed to electron beam. These unique benefits of focused supersonic oxygen delivery to the surface enable a dramatic increase in the etch rate of graphene with no parasitic carbon “halo” deposition due to secondary electrons from backscattered electrons (BSE) in the area surrounding the etched regions. Increase of jet temperature via local nozzle heating provides means for enhancing kinetic energy of impinging oxygen molecules, which further speed up the etch, thus minimizing the beam exposure time and required electron dose, before parasitic carbon film deposition due to BSE mediated decomposition of adsorbed hydrocarbon contaminants has a measurable impact on quality of graphene etched features. Interplay of different physical mechanisms underlying an oxygen micro-jet assisted FEBIE process is discussed with support from experimental observations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗