Search NASA⌕ Search

SEARCH · Search NASA

Results for “Embedded”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Comparison of tropical pacific temperature and current simulations with two vertical mixing schemes embedded in an ocean general circulation model and reference to observations

The Pacanowski-Philander (PP) and Mellor-Yamada (MY) parameterization models of vertical mixing by turbulent processes were embedded in the Geophysical Fluid Dynamics Laboratory high-resolution ocean general circulation model of the tropical Pacific Ocean. All other facets of the numerical simulations were the same. Simulations were made for the 1987-1988 period. At the equator the MY simulation produced near-surface temperatures more uniform with depth, a deeper thermocline, a deeper core speed of the Equatorial Undercurrent, and a South Equatorial Current with greater vertical thickness compared with that computed with the PP method. Along 140 deg W, between 5 deg N and 10 deg N, both simulations were the same. Moored buoy current and temperature observations had been recorded by the Pacific Marine Environmental Laboratory at three sites (165 deg E, 140 deg W, 110 deg W) along the equator and at three sites (5 deg N, 7 deg N, 9 deg N) along 140 deg W. Simulated temperatures were lower than those observed in the near-surface layer and higher than those observed in the thermocline. Temperature simulations were in better agreement with observations compared to current simulations. At the equator, PP current and temperature simulations were more representative of the observations than MY simulations.

Halpern, David↗

Embedded Temperature-Change Sensors

Transducers sensitive to rates of change of temperature embedded in integrated circuits and discrete electronic components damaged by overheating, according to proposal. Used to detect onset of rapid heating and to trigger shutoffs of power or other corrective actions before temperatures rise beyond safe limits. Sensors respond fast and reliably to incipient overheating because they are in direct thermal contact with vulnerable circuit elements.

Thakoor, Sarita↗

Two-dimensional mesh embedding for Galerkin B-spline methods

A number of advantages result from using B-splines as basis functions in a Galerkin method for solving partial differential equations. Among them are arbitrary order of accuracy and high resolution similar to that of compact schemes but without the aliasing error. This work develops another property, namely, the ability to treat semi-structured embedded or zonal meshes for two-dimensional geometries. This can drastically reduce the number of grid points in many applications. Both integer and non-integer refinement ratios are allowed. The report begins by developing an algorithm for choosing basis functions that yield the desired mesh resolution. These functions are suitable products of one-dimensional B-splines. Finally, test cases for linear scalar equations such as the Poisson and advection equation are presented. The scheme is conservative and has uniformly high order of accuracy throughout the domain.

Shariff, Karim↗

Fault-tolerant, embedded CLIPS applications

The enhancements to CLIPS4.3 presented in this paper provide an embedded CLIPS application with the ability to continue operation with minimal to no loss of information in the event of a hardware or a software failure. Given an arbitrary failure, the CLIPS application's environment (fact-list, agenda, and pattern matching network) will be reconstructed to the point at which the failure was experienced. The environment reconstruction is based on state files to which the application periodically checks environment information (fact-list and agenda). The routine for checkpointing the state of the application is as efficient as possible so that the overhead introduced to normal execution of the application is minimal. The only assumptions made by the CLIPS application are that it is running under an operating system that guarantees it access to uncorrupt state files and that the application will be automatically restarted should it terminate abnormally.

Hicks, Jaye↗

Spacecraft Jitter Attenuation Using Embedded Piezoelectric Actuators

Remote sensing from spacecraft requires precise pointing of measurement devices in order to achieve adequate spatial resolution. Unfortunately, various spacecraft disturbances induce vibrational jitter in the remote sensing instruments. The NASA Langley Research Center has performed analysis, simulations, and ground tests to identify the more promising technologies for minimizing spacecraft pointing jitter. These studies have shown that the use of smart materials to reduce spacecraft jitter is an excellent match between a maturing technology and an operational need. This paper describes the use of embedding piezoelectric actuators for vibration control and payload isolation. In addition, recent advances in modeling, simulation, and testing of spacecraft pointing jitter are discussed.

Belvin, W. Keith↗

A liquid drop model for embedded atom method cluster energies

Minimum energy configurations for homonuclear clusters containing from two to twenty-two atoms of six metals, Ag, Au, Cu, Ni, Pd, and Pt have been calculated using the Embedded Atom Method (EAM). The average energy per atom as a function of cluster size has been fit to a liquid drop model, giving estimates of the surface and curvature energies. The liquid drop model gives a good representation of the relationship between average energy and cluster size. As a test the resulting surface energies are compared to EAM surface energy calculations for various low-index crystal faces with reasonable agreement.

Finley, C. W.↗

Modeling the effect of unsteady flows on the time average flow field of a blade row embedded in an axial flow multistage turbomachine

The role of unsteady flow processes in establishing the performance of axial flow turbomachinery was investigated. The development of the flow model, as defined by the time average flow equations associated with the passage of the blade row embedded in a multistage configuration, is presented. The mechanisms for unsteady momentum and energy transport is outlined. The modeling of the unsteady momentum and energy transport are discussed. The procedure for simulating unsteady multistage turbomachinery flows is described.

Adamczyk, John J.↗

Analysis of Thick Sandwich Shells with Embedded Ceramic Tiles

The Composite Armored Vehicle (CAV) is an advanced technology demonstrator of an all-composite ground combat vehicle. The CAV upper hull is made of a tough light-weight S2-glass/epoxy laminate with embedded ceramic tiles that serve as armor. The tiles are bonded to a rubber mat with a carefully selected, highly viscoelastic adhesive. The integration of armor and structure offers an efficient combination of ballistic protection and structural performance. The analysis of this anisotropic construction, with its inherent discontinuous and periodic nature, however, poses several challenges. The present paper describes a shell-based 'element-layering' technique that properly accounts for these effects and for the concentrated transverse shear flexibility in the rubber mat. One of the most important advantages of the element-layering technique over advanced higher-order elements is that it is based on conventional elements. This advantage allows the models to be portable to other structural analysis codes, a prerequisite in a program that involves the computational facilities of several manufacturers and government laboratories. The element-layering technique was implemented into an auto-layering program that automatically transforms a conventional shell model into a multi-layered model. The effects of tile layer homogenization, tile placement patterns, and tile gap size on the analysis results are described.

Davila, Carlos G.↗

Global and Local Distortion Inference During Embedded Zerotree Wavelet Decompression

This paper presents algorithms for inferring global and spatially local estimates of the squared-error distortion measures for the Embedded Zerotree Wavelet (EZW) image compression algorithm. All distortion estimates are obtained at the decoder without significantly compromising EZW's rate-distortion performance. Two methods are given for propagating distortion estimates from the wavelet domain to the spatial domain, thus giving individual estimates of distortion for each pixel of the decompressed image. These local distortion estimates seem to provide only slight improvement in the statistical characterization of EZW compression error relative to the global measure, unless actual squared errors are propagated. However, they provide qualitative information about the asymptotic nature of the error that may be helpful in wavelet filter selection for low bit rate applications.

Huber, A. Kris↗

Graph Embedding Techniques for Bounding Condition Numbers of Incomplete Factor Preconditioning

We extend graph embedding techniques for bounding the spectral condition number of preconditioned systems involving symmetric, irreducibly diagonally dominant M-matrices to systems where the preconditioner is not diagonally dominant. In particular, this allows us to bound the spectral condition number when the preconditioner is based on an incomplete factorization. We provide a review of previous techniques, describe our extension, and give examples both of a bound for a model problem, and of ways in which our techniques give intuitive way of looking at incomplete factor preconditioners.

Guattery, Stephen↗

ISO Observations of Starless Bok Globules: Usually No Embedded Stars

We have used ISOCAM to search the cores of a sample of small Bok globules previously classified to be mostly starless based on analysis of IRAS data. The ISO observations at 6.75microns (LW2 filter) and 14.5microns (LW3 filter) were sufficiently deep to enable detection of any low-mass hydrogen burning star or young stellar object (YSO) embedded in these globules. Of the 20 Bok globules observed by ISOCAM to date, we have reduced the data for 14. Of these, 13 show no evidence for faint red (S(sub v)(LW3) greater than S(sub v)(LW2)) stars missed by IRAS. One (CB68) does show the first mid-infrared detection of the very cool IRAS source toward this cloud, and may be a Class I or 0 YSO. We conclude, based on these new ISO observations, that Bok globules which have no IRAS sources are in general bona fide starless molecular clouds.

Clemens, D.↗

Post-flare loops embedded in a hot coronal fan-like structure

Limb events were demonstrated on the sun in which rising post-flare loops were embedded in hot structures looking in soft X-rays like fans of rays, formed during the flare and extending high into the corona. One of these structures is analyzed and it is suggested that these fans of rays represent temporary ministreamers, along which mass flows into interplanetary space. This suggestion is supported by maps of solar wind density constructed from scintillation measurements.

Svestka, Z.↗

The Intermittently Embedded Herbig AE/BE Stars

We discuss silicate emission profiles observed with the ISO SWS and ground-based IR observations in a population of intermittently embedded Herbig Ae/Be stars which are viewed edge-on to their polarimetrically identified dust and gas disks. The ISO SWS observations confirm the lack of a simple correlation between system age and the profile shape. Comparison with laboratory silicates suggests that much of the observed variation is due to different annealing histories of the grains.

Grady, C. A.↗

Structural Embeddings: Mechanization with Method

The most powerful tools for analysis of formal specifications are general-purpose theorem provers and model checkers, but these tools provide scant methodological support. Conversely, those approaches that do provide a well-developed method generally have less powerful automation. It is natural, therefore, to try to combine the better-developed methods with the more powerful general-purpose tools. An obstacle is that the methods and the tools often employ very different logics. We argue that methods are separable from their logics and are largely concerned with the structure and organization of specifications. We, propose a technique called structural embedding that allows the structural elements of a method to be supported by a general-purpose tool, while substituting the logic of the tool for that of the method. We have found this technique quite effective and we provide some examples of its application. We also suggest how general-purpose systems could be restructured to support this activity better.

Munoz, Cesar↗

Coupling Between Microstrip Lines Embedded in Polyimide Layers for 3D-MMICs on Si

Three-dimensional circuits built upon multiple layers of polyimide are required for constructing Si/SiGe monolithic microwave/millimeter-wave integrated circuits on CMOS (low resistivity) Si wafers. However, the closely spaced transmission lines are susceptible to high levels of coupling, which degrades circuit performance. In this paper, Finite Difference Time Domain (FDTD) analysis and measured characteristics of novel shielding structures that significantly reduce coupling between embedded microstrip lines are presented.

Ponchak, George E.↗

Effectiveness of Diffusion Barrier Coatings for Mo-Re Embedded in C/SiC and C/C

Advanced high-temperature cooling applications may often require the elevated-temperature capability of carbon/silicon carbide or carbon/carbon composites in combination with the hermetic capability of metallic tubes. In this paper, the effects of C/SiC and C/C on tubes fabricated from several different refractory metals were evaluated. Though Mo, Nb, and Re were evaluated in the present study, the primary effort was directed toward two alloys of Mo-Re, namely, arc cast Mo-41Re and powder metallurgy Mo-47.5Re. Samples of these refractory metals were subjected to either the PyC/SiC deposition or embedding in C/C. MoSi2(Ge), R512E, and TiB2 coatings were included on several of the samples as potential diffusion barriers. The effects of the processing and thermal exposure on the samples were evaluated by conducting burst tests, microhardness surveys, and scanning electron microscopic examination (using either secondary electron or back scattered electron imaging and energy dispersive spectroscopy). The results showed that a layer of brittle Mo-carbide formed on the substrates of both the uncoated Mo-41Re and the uncoated Mo-47.5Re, subsequent to the C/C or the PyC/SiC processing. Both the R512E and the MoSi2(Ge) coatings were effective in preventing not only the diffusion of C into the Mo-Re substrate, but also the formation of the Mo-carbides. However, none of the coatings were effective at preventing both C and Si diffusion without some degradation of the substrate.

Glass, David E.↗

Coupling Between Finite Ground Coplanar Waveguides Embedded in Polyimide Layers for 3D-MMICs on Si

Three-dimensional circuits built upon multiple layers of polyimide are required for constructing Si/SiGe monolithic microwave/mm-wave integrated circuits on low resistivity Si wafers. However, the closely spaced transmission lines are susceptible to high levels of cross-coupling, which degrades the overall circuit performance. In this paper, theoretical and experimental results on coupling of Finite Ground Coplanar (FGC) waveguides embedded in polyimide layers are presented for the first time. These results show that FGC lines have approximately 8 dB lower coupling than coupled Coplanar Waveguides. Furthermore, it is shown that the forward and backward coupling characteristics for FGC lines do not resemble the coupling characteristics of other transmission lines such as microstrip.

Ponchak, George E.↗

Coupling Between Microstrip Lines with Finite Width Ground Plane Embedded in Polyimide Layers for 3D-MMICs on Si

Three-dimensional circuits built upon multiple layers of polyimide are required for constructing Si/SiGe monolithic microwave/millimeter-wave integrated circuits on complementary metal oxide semiconductor (CMOS) (low resistivity) Si wafers. Thin film microstrip lines (TFMS) with finite width ground planes embedded in the polyimide are often used. However, the closely spaced TFMS lines are susceptible to high levels of coupling, which degrades circuit performance. In this paper, Finite Difference Time Domain (FDTD) analysis and experimental measurements are used to show that the ground planes must be connected by via holes to reduce coupling in both the forward and backward directions.

Ponchak, George E.↗