Search NASA⌕ Search

SEARCH · Search NASA

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Wavelengths and levels of the Na I isoelectronic sequence from K IX through Mn XV

The seven spectra K IX through Mn XV have been analyzed and the series limits determined. We present the adopted wavelengths and the derived energy levels and term splittings. The highly ionized atoms were produced in a spark source and recorded mainly on a 3 m grazing incidence spectrograph. Many new lines have been identified and many previously given wavelengths have been revised. All wavelengths have been examined for consistency by least-squares-fitting procedures and other tests. These procedures indicated misidentified lines and incorrect wavelengths which we corrected when possible. A discussion of the errors is given.

Cohen, L.↗
NASA NTRS1975

Line positions of H2O in the 1.33 to 1.45 micron region

Results are presented for an experimental investigation, using a vacuum IR spectrometer, of the line positions and strengths of water vapor in the spectral region from 6900 to 7500 kaysers. The line-center frequencies of the vibration-rotation transitions of the five H2O bands in this spectral interval are determined along with the rotational levels of the (101), (200), (021), (120), and (002) states. It is noted that several of the upper-state levels are perturbed by resonance effects involving either Fermi coupling or Coriolis coupling of the near-resonance levels of various states. Tables are provided which list the measured line-center frequencies, upper- and lower-state rotational quantum numbers, ground-state energy levels, line strengths, and band assignments. It is shown that the (101) and (021) bands are type A with origins at 7249.811 and 6871.51 kaysers, respectively, while the (200), (002), and (120) bands are type B with origins at 7201.540, 7445.07, and 6775.10 kaysers, respectively.

Toth, R. A.↗
NASA NTRS1976

Inductively coupled TI-MPD spacecraft electric propulsion

A nuclear electric propulsion concept using a thermionic reactor inductively coupled to a magnetoplasma-dynamic (MPD) accelerator is described and the results of preliminary analyses are presented. In this system, the thermionic generating unit operates continuously at a power level of approximately 0.4 MW, while the MPD thruster operates intermittently at higher voltages and power levels. Energy storage is provided by building up a large current in an inductor. Periodically, the charging current is interrupted and the energy stored in the magnetic field of the inductor is utilized for a short duration thrust pulse. A typical thrust pulse is characterized by a power level of 1 to 4 MWe, a duration of 1 msec, and a duty cycle of approximately 20%. Results of the preliminary analysis show that approximately 85 to 90% of the power available from the thermionic converter array can be delivered to the MPD thruster for a nominal 400 kWe system with an inductive unit suitable for a flight vehicle. Optimized values of the total specific mass of the system including the thermionic reactor, the inductor, and the MPD thruster are estimated in the range of 23 to 24 kg/kWe.

Britt, E. J.↗
NASA NTRS1985

Counterstreaming hydrogen and oxygen ions observed in the magnetosphere on ISEE-1

Counterstreaming ions or ions travelling simultaneously both parallel and antiparallel to the magnetic field direction have been briefly noted in the literature but have not been studied previously in depth. Over 60 counterstreaming ion (CSI) events observed on the ISEE-1 satellite have been studied. They were found to occur at altitudes of about 2 to 8 earth radii on L shells of about 5 to 12 in the evening-to-morning sector from about 1700-0900 LT. Often both oxygen and hydrogen ions at a number of energy levels are counterstreaming but some events show only either oxygen or hydrogen ions involved. One particularly interesting event shows only counterstreaming oxygen ions with 417 eV energy; oxygen ions of lower energy (215 eV) and above (630-17,000 eV) and all the hydrogen ions between 215-17,000 eV energy have lower fluxes and/or nearly isotropic pitch angle distributions. This event correlates well with wave activity in the 17-100 Hz band and is also accompanied by 200 eV downgoing and 400 eV upgoing electrons. Details of this event and the other counterstreaming events are presented.

Horita, R. E.↗
NASA NTRS1990

Secondary electron emission characteristics of molybdenum-masked, ion-textured OFHC copper

A method for producing a uniform, highly textured surface on oxygen-free, high conductivity (OFHC) copper by ion bombardment using sputtered molybdenum as a texture-inducing masking film was developed and used to provide samples for study. The purpose was to develop a basically OFHC copper surface having very low secondary electron emission characteristics. Surfaces having low secondary electron emission are a requirement for the electrodes of very high efficiency multistage depressed collectors (MDC's). Such MDC's are used in microwave amplifier traveling wave tubes for space communications and other applications. OFHC copper is the material most commonly used for MDC electrodes because it has high thermal conductivity, it is easy to machine, and its fabrication and brazing procedures are well established. However, its untreated surface displays relatively very high levels of secondary electron emissions. Textured OFHC copper samples were tested for true secondary electron emission and relative reflected primary electron yield at primary electron beam energy levels from 200 to 2000 eV and at direct (0 deg) to oblique (60 deg) beam impingement angles. The test results for three of the samples, each of which was processed in a slightly different way, are compared with each other and with test results for a machined OFHC copper sample. Although the textured samples are not represented here as having been processed optimally, their measured secondary electron emission characteristics are significantly lower than those of the untreated OFHC copper sample over the range of conditions studied. Importantly, the relative reflected primary electron yield of one of the textured samples is conspicuously lower than that of the others. Clearly, with further development, the molybdenum-masked ion-textured OFHC copper surface will be a promising material for high-efficiency MDC electrodes.

Curren, Arthur N.↗
DOE OSTI2024

Scalar and Tensor Charmonium Resonances in Coupled-Channel Scattering from Lattice QCD

We determine J P C = 0 + + and 2 + + hadron-hadron scattering amplitudes in the charmonium energy region up to 4100 MeV using lattice QCD, a first-principles approach to QCD. Working at m π ≈ 391 MeV , more than 200 finite-volume energy levels are computed and these are used in extensions of the Lüscher formalism to determine infinite-volume coupled-channel scattering amplitudes. We find that this energy region contains a single χ c 0 and a single χ c 2 resonance. Both are found as pole singularities on the closest unphysical Riemann sheet, just below 4000 MeV with widths around 70 MeV. The largest couplings are to kinematically closed D * D ¯ * channels in S -wave, and couplings to several decay channels consisting of pairs of open-charm mesons are found to be large and significant in both cases. Above the ground state χ c 0 , no other scalar bound states or near- D D ¯ threshold resonances are found, in contrast to several theoretical and experimental studies. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1975

Molecular spectroscopy and collisional excitation

The paper examines the basic principles underlying the molecular transitions responsible for interstellar molecular spectra. The energy levels of molecules are discussed in detail with special attention given to the Born-Oppenheimer approximation, the electronic Hamiltonian, and the parameters of vibrational and rotational energy. The probabilities for radiative and collisional transitions are calculated. A brief review of techniques for molecular spectroscopy is presented along with methods used to determine collision cross sections on both an experimental and a theoretical basis.

Green, S.↗
NASA NTRS1980

Effects of thermal annealing on the deep-level defects and I-V characteristics of 200 keV proton irradiated AlGaAs-GaAs solar cells

Detailed characterization of deep-level defects and analysis of dark I-V data in 200 keV proton irradiated AlGaAs-GaAs solar cells have been carried out for several proton fluences (5 x 10 to the 11th, 10 to the 12th, and 10 to the 13th P/sq cm), using DLTS, C-V, and I-V measurement techniques. To study the effect of low temperature thermal annealing on the deep-level defect properties, these irradiated samples were annealed in vacuum at 300 C for one hour. Comparison was then made on the measured defect parameters (i.e., defect energy levels and densities) and the dark I-V characteristics for both the annealed and unannealed samples.

Li, S. S.↗
NASA NTRS1981

Study of radiation induced deep-level defects and annealing effects in the proton irradiated AlGaAs-GaAs solar cells

The radiation induced deep-level defects and the recombination parameters in the proton irradiated AlGaAs-GaAs p-n junction solar cells were investigated over a wide range of proton energies (from 50 KeV to 10 MeV) and proton fluences (from 10 to the 10th to 10 to the 13th P/sq cm), using DLTS, I-V, C-V, and SEM-EMIC measurement techniques. The measurements were used to determine the defect and recombination parameters such as defect density and energy level, carrier lifetimes, and the hole diffusion lengths in the GaAs LPE layers. Results show that a good correlation was obtained between the measured defect parameters and the dark recombination current as well as the performance parameters of the solar cells. The most damages to the cell were produced by the 200 KeV protons. In addition, the effects of low temperatures (200 to 400 C) thermal annealing on the deep-level defects and the dark current of the 200 KeV proton irradiated samples were examined.

Li, S. S.↗
NASA NTRS1982

Comparison of Venusian lightning observations

Spacecraft observations of Venusian lightning are reviewed to determine the energy dissipation rate. Optical sensors provide data on the total energy dissipated per flash, so long as the contributions of atomic oxygen and ionized carbon are accounted for. Radio probes yield information on the total lightning occurrences. Venera 9-12 radio surveys are reviewed, and event rates of 20-30/sec for Venera 11 are mentioned. Venera 9 observed a sole, 70 sec event period on the Venusian nightside. Comparisons are made between the recorded electromagnetic energy levels and terrestrial lightning data. The nightside occurrence rate is calculated to be 0.08 strokes/sq km per year, while the dayside exhibits 85 flashes/sq km per sec. Energy dissipation rates ranging from 0.0012-0.25 W/sq m are calculated for various flash durations. It is suggested that the lightning occurs in the clouds as part of an organized meteorological system.

Borucki, W. J.↗
NASA NTRS2017

Investigation of Deuterium Loaded Materials Subject to X-Ray Exposure

Results are presented from an exploratory study involving x-ray irradiation of select deuterated materials. Titanium deuteride plus deuterated polyethylene, deuterated polyethylene alone, and for control, hydrogen-based polyethylene samples and nondeuterated titanium samples were exposed to x-ray irradiation. These samples were exposed to various energy levels from 65 to 280 kV with prescribed electron flux from 500 to 9000 μA impinging on a tungsten braking target, with total exposure times ranging from 55 to 280 min. Gamma activity was measured using a high-purity germanium (HPGe) detector, and for all samples no gamma activity above background was detected. Alpha and beta activities were measured using a gas proportional counter, and for select samples beta activity was measured with a liquid scintillator spectrometer. The majority of the deuterated materials subjected to the microfocus x-ray irradiation exhibited postexposure beta activity above background and several showed short-lived alpha activity. The HPE and nondeuterated titanium control samples exposed to the x-ray irradiation showed no postexposure alpha or beta activities above background. Several of the samples (SL10A, SL16, SL17A) showed beta activity above background with a greater than 4σ confidence level, months after exposure. Portions of SL10A, SL16, and SL17A samples were also scanned using a beta scintillator and found to have beta activity in the tritium energy band, continuing without noticeable decay for over 12 months. Beta scintillation investigation of as-received materials (before x-ray exposure) showed no beta activity in the tritium energy band, indicating the beta emitters were not in the starting materials.

x-ray irradiation↗
NASA NTRS1979

Energy and cost savings results for advanced technology systems from the Cogeneration Technology Alternatives Study /CTAS/

The Cogeneration Technology Alternatives Study (CTAS), a program undertaken to identify the most attractive advanced energy conversion systems for industrial cogeneration applications in the 1985-2000 time period, is described, and preliminary results are presented. Two cogeneration options are included in the analysis: a topping application, in which fuel is input to the energy conversion system which generates electricity and waste heat from the conversion system is used to provide heat to the process, and a bottoming application, in which fuel is burned to provide high temperature process heat and waste heat from the process is used as thermal input to the energy conversion system which generates energy. Steam turbines, open and closed cycle gas turbines, combined cycles, diesel engines, Stirling engines, phosphoric acid and molten carbonate fuel cells and thermionics are examined. Expected plant level energy savings, annual energy cost savings, and other results of the economic analysis are given, and the sensitivity of these results to the assumptions concerning fuel prices, price of purchased electricity and the potential effects of regional energy use characteristics is discussed.

Sagerman, G. D.↗
NASA NTRS1983

On the wave number spectrum of oceanic mesoscale variability observed by the SEASAT altimeter

The wave number spectrum of mesoscale variability in various parts of the oceans is computed on the basis of sea surface height variations measured by the SEASAT altimeter in nearly repeat orbits during the last 24 days of its mission, and it is noted that oceanic spectrum characteristics are dependent on the energy level of the mesoscale variability. On the basis of an assumed horizontal isotropy of mesoscale variability, scalar-wave number spectra of sea surface height and geostrophic kinetic energy are presented and the dynamical implications of these spectra are discussed. A rigorous examination of the effects of residual geoid and atmospheric water vapor on the computed oceanic spectra indicates that the general characteristics of the spectra were not significantly affected by them.

Fu, L.-L.↗
NASA NTRS1976

Rigid rotators

The two-particle, steady-state Schroedinger equation is transformed to center of mass and internuclear distance vector coordinates, leading to the free particle wave equation for the kinetic energy motion of the molecule and a decoupled wave equation for a single particle of reduced mass moving in a spherical potential field. The latter describes the vibrational and rotational energy modes of the diatomic molecule. For fixed internuclear distance, this becomes the equation of rigid rotator motion. The classical partition function for the rotator is derived and compared with the quantum expression. Molecular symmetry effects are developed from the generalized Pauli principle that the steady-state wave function of any system of fundamental particles must be antisymmetric. Nuclear spin and spin quantum functions are introduced and ortho- and para-states of rotators, along with their degeneracies, are defined. Effects of nuclear spin on entropy are deduced. Next, rigid polyatomic rotators are considered and the partition function for this case is derived. The patterns of rotational energy levels for nonlinear molecules are discussed for the spherical symmetric top, for the prolate symmetric top, for the oblate symmetric top, and for the asymmetric top. Finally, the equilibrium energy and specific heat of rigid rotators are derived.

Source record↗
NASA NTRS1982

The far-infrared spectrum of the OH radical

It is thought likely that the study of spectral lines in the far-infrared might provide at least as much information about the physics and chemistry of the interstellar environment as radioastronomy. However, by comparison with the microwave region, the far-infrared is largely unexplored. There is a pressing need for good laboratory data to aid searches and assignments of spectra from the interstellar clouds and nebulae. Brown et al. (1981) have conducted a study of the laser magnetic resonance (LMR) spectrum of the OH radical in its ground state at far-infrared wavelengths. The present investigation is concerned with the computation of the frequencies of individual hyperfine transitions involving all rotational levels up to J = 4 1/2. The results of the calculation are presented in a table. The results are summarized in a diagram which shows the low-lying energy levels of OH. The frequencies of transitions between levels studied directly in the LMR spectrum are quite reliable.

Brown, J. M.↗
NASA NTRS2016

An Integrated Circuit for Radio Astronomy Correlators Supporting Large Arrays of Antennas

Radio telescopes that employ arrays of many antennas are in operation, and ever larger ones are being designed and proposed. Signals from the antennas are combined by cross-correlation. While the cost of most components of the telescope is proportional to the number of antennas N, the cost and power consumption of cross-correlationare proportional to N2 and dominate at sufficiently large N. Here we report the design of an integrated circuit (IC) that performs digital cross-correlations for arbitrarily many antennas in a power-efficient way. It uses an intrinsically low-power architecture in which the movement of data between devices is minimized. In a large system, each IC performs correlations for all pairs of antennas but for a portion of the telescope's bandwidth (the so-called "FX" structure). In our design, the correlations are performed in an array of 4096 complex multiply-accumulate (CMAC) units. This is sufficient to perform all correlations in parallel for 64 signals (N=32 antennas with 2 opposite-polarization signals per antenna). When N is larger, the input data are buffered in an on-chipmemory and the CMACs are re-used as many times as needed to compute all correlations. The design has been synthesized and simulated so as to obtain accurate estimates of the IC's size and power consumption. It isintended for fabrication in a 32 nm silicon-on-insulator process, where it will require less than 12mm2 of silicon area and achieve an energy efficiency of 1.76 to 3.3 pJ per CMAC operation, depending on the number of antennas. Operation has been analyzed in detail up to N = 4096. The system-level energy efficiency, including board-levelI/O, power supplies, and controls, is expected to be 5 to 7 pJ per CMAC operation. Existing correlators for the JVLA (N = 32) and ALMA (N = 64) telescopes achieve about 5000 pJ and 1000 pJ respectively usingapplication-specific ICs in older technologies. To our knowledge, the largest-N existing correlator is LEDA atN = 256; it uses GPUs built in 28 nm technology and achieves about 1000 pJ. Correlators being designed for the SKA telescopes (N = 128 and N = 512) using FPGAs in 16nm technology are predicted to achieve about 100 pJ.

ASIC↗
DOE OSTI2025

Stable cycling of high-mass loaded MnO 2 electrodes for sodium-ion batteries

Achieving cost-effective, sustainable solutions for large-scale energy storage are critical for advancing the global clean energy transition. In view of the challenges posed by limited lithium reserves, low-cost sodium-ion batteries (SIBs) have emerged as a promising direction, especially for grid-level energy storage. Among the various battery electrode materials, manganese dioxide (MnO 2 ) stands out as a favorable choice for such large-scale applications due to its earth abundance, cost-effectiveness, and non-toxic nature. Although MnO 2 is known as a pseudocapacitive material with superior cycling stability in aqueous electrolytes, its dissolution in non-aqueous electrolytes has restricted its use in long-lifetime batteries. In this study, we address two issues which have limited the use of MnO 2 electrodes in non-aqueous electrolytes. First, using electrochemical quartz crystal microbalance measurements in combination with other electrochemical methods, we demonstrate that diglyme (bis(2-methoxyethyl) ether) electrolyte can achieve stable cycling of electrodeposited ε-MnO 2 . These results enable us to tackle a second objective, that is increasing the mass loading of the MnO 2 electrode, since achieving high areal energy density is a significant factor in reducing manufacturing costs. Using 3D printed graphene aerogel (GA) as a scaffold, our studies show that the electrodeposited MnO 2 /GA electrodes possess scalable properties with mass loadings from 20 to 80 mg cm −2 . The resulting electrodes exhibit areal energy densities as high as 4.4 mA h cm −2 at a current density of 10 mA cm −2 . The high mass loaded MnO 2 electrodes were incorporated as a cathode in a SIB which used TiO 2 as the anode. The SIB device exhibited excellent performance with power densities in excess of 70 mW cm −2 . These studies highlight the promise of MnO 2 electrodes for use in a low-cost technology for large-scale energy storage.

25 ENERGY STORAGE↗
NASA NTRS1974

Effects of curvilinear motion in large-amplitude bending of C3

The geometry of the bending of a linear triatomic molecule is analyzed, and an expression for the average rotational constant is derived. A harmonic oscillator model of C3 is fitted to the observed rotational constant within 0.6%. The bond distance between atoms at zero bending is 1.287 A according to this model; this is noticeably larger than the average internuclear distance of 1.277 A for the vibrational ground state. The first order perturbation solutions for the vibrational energy levels, taking into account the effect of a quartic perturbation potential, closely match observed levels. For a square well potential model of C3, the effect of curvilinear motion in bending is similar to that found for the harmonic oscillator model, though the decreases in energy are about twice as large. In both models, the average energy decrease is relatively constant at approximately 10% over a wide range of vibrational quantum number.

Hansen, C. F.↗