Search NASA⌕ Search

SEARCH · Search NASA

Results for “Equilibrium diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Solute partitioning under continuous cooling conditions as a cooling rate indicator

A model of solute partitioning in a finite body under conditions of continuous cooling is developed for the determination of cooling rates from concentration profile data, and applied to the partitioning of zirconium between ilmenite and ulvospinel in the Apollo 15 Elbow Crater rocks. Partitioning in a layered composite solid is described numerically in terms of concentration profiles and diffusion coefficients which are functions of time and temperature, respectively; a program based on the model can be used to calculate concentration profiles for various assumed cooling rates given the diffusion coefficients in the two phases and the equilibrium partitioning ratio over a range of temperatures. In the case of the Elbow Rock gabbros, the cooling rates are calculated from measured concentration ratios 10 microns from the interphase boundaries under the assumptions of uniform and equilibrium initial conditions at various starting temperatures. It is shown that the specimens could not have had uniform concentrations profiles at the previously suggested initial temperature of 1350 K. It is concluded that even under conditions where the initial temperature, grain sizes and solute diffusion coefficients are not well characterized, the model can be used to estimate the cooling rate of a grain assemblage to within an order of magnitude.

Onorato, P. I. K.↗

Fe{sup 2+} : ZnSe laser pumped by a nonchain electric-discharge HF laser at room temperature

The characteristics of a Fe{sup 2+} : ZnSe laser in a scheme with transverse pumping by a nonchain electric-discharge HF laser at room temperature are studied. Doping of ZnSe crystals with Fe{sup 2+} ions was performed by diffusion simultaneously through two surfaces under the conditions of thermodynamic equilibrium. It is found that the Fe{sup 2+} : ZnSe laser pulses are modulated by short spikes (3 – 7 ns at half maximum at low pump energies), whose number decreases and modulation depth increases as the pump energy decreases to a threshold value. A laser pulse energy of 30.6 mJ is achieved at a pulse duration at half maximum of ∼125 ns (at high pump energies); the possibility of a further increase in the energy of Fe{sup 2+} : ZnSe lasers pumped by nonchain HF lasers is discussed. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of drift-resistive-inertial ballooning transport model for tokamak edge plasmas

A new model is developed for transport driven by drift-resistive-inertial ballooning modes (DRIBMs) in axisymmetric tokamak plasmas. The model is derived using two-fluid reduced Braginskii equations in a generalized s-{alpha} geometry. The unified theory includes diamagnetic effects, parallel electron and ion dynamics, electron inertia, magnetic perturbations, transverse particle diffusion, gyroviscous stress terms, electron and ion equilibrium temperature gradients, and temperature perturbations. A mixing length approximation is used to compute electron and ion thermal transport as well as particle fluxes from eigenvalues and eigenvectors of the linearized equations. The prediction for the saturation level is obtained by balancing the DRIBM growth rate against the nonlinear ExB convection. The parametric dependence of DRIBMs is investigated in systematic scans over density gradient, electron and ion temperature gradients, magnetic-q, collision frequency, magnetic shear, and Larmor radius. The DRIBM threshold is determined as a function of the collision frequency and the density and temperature gradients. The transition from DRIBM to the toroidal ion temperature gradient (ITG) mode is observed for small density gradients. For steep density gradients, the effect of ITG on DRIBM is found to be stabilizing. The transport seen in the DRIBM is of a scale that is consistent with the observed experimental anomalous transport, suggesting that the DRIBM mode could be the principle agent responsible for edge transport in Ohmic and L-mode discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of non-equilibrium partitioning in direct metal deposited copper–iron concentrated alloys

The direct metal deposition (DMD) additive manufacturing process produces high cooling rates within a small melt pool and can lead to high amounts of solute trapping. These high cooling rates limit diffusion and lead to the formation of non-equilibrium phases. In this work, we utilize a numerical model to calculate the degree of solute trapping, defined as non-equilibrium partitioning. A theoretical case with overall composition fixed to 50Cu-50Fe at.%. was performed to observe the influence of increasing solidification rates. We then simulate DMD of equimolar Cu-Fe powder printed on mild steel substrate and the calculated non-equilibrium phase compositions were consistent with experimental observations reported earlier on this alloy composition. For a single deposited track, cooling rates are high enough to yield significant solute trapping. Here, the degree of solute trapping is highest near the free surface and has a gradient that correlates with the cooling rate gradient.

36 MATERIALS SCIENCE↗

Reduction of vanadium diffusivity within copper grain boundaries due to enhanced binding

We investigate permeation of vanadium (V) through copper (Cu) layers in V/Cu/niobium (Nb) and molybdenum (Mo)/Cu/V tri-layer composites and compare it with the permeation behavior of Nb. Despite their low solubility in single-crystal Cu, both V and Nb permeate readily due to short-circuit transport through Cu grain boundaries (GBs). However, Nb permeates preferentially to V. Atomistic simulations suggest that this difference is due to lower V diffusivity at general GBs in Cu, compared to Nb. Here, the lower V diffusivity, in turn, arises from stronger V binding to the boundary, which manifests as a greater equilibrium GB concentration as well as a higher activation energy for GB diffusion.

36 MATERIALS SCIENCE↗

Properties of grains derived from IRAS observations of dust

The authors used the results of Infrared Astronomy Satellite (IRAS) observations of diffuse medium dust to develop a theoretical model of the infrared properties of grains. Recent models based entirely on traditional observations of extinction and polarization include only particles whose equilibrium temperatures do not exceed 20 K in the diffuse interstellar medium. These classical grains, for which the authors have adopted the multipopulation model developed by Hong and Greenberg (1980), can explain only the emission in the IRAS 100 micron band. The measurements at shorter wavelengths (12, 25 and 60 microns) require two new particle populations. Vibrational fluorescence from aromatic molecules provides the most likely explanation for the emission observed at 12 microns, with polycyclic aeromatic hydrocarbons (PAHs) containing about 10 percent of cosmic carbon. A simplified model of the emission process shows that PAH molecules can also explain most of the emission measured by IRAS at 25 microns. The authors identified the warm particles responsible for the excess 60 microns emission with small (a approx. equals 0.01 microns) iron grains. A compilation of the available data on the optical properties of iron indicates that the diffuse medium temperature of small iron particles should be close to 50 K and implies that a large, possibly dominant, fraction of cosmic iron must be locked up in metallic particles in order to match the observed 60 microns intensities. The model matches the infrared fluxes typically observed by IRAS in the diffuse medium and can also reproduce the infrared surface brightness distribution in individual clouds. In particular, the combination of iron and classical cool grains can explain the surprising observations of the 60/100 microns flux ratio in clouds, which is either constant or increases slightly towards higher opacities. The presence of metallic grains has significant implications for the physics of the interstellar medium, including catalytic H2 formation, for which iron grains could be the main site; differences in depletion patterns between iron and other refractory elements (Mg, Si); and superparamagnetic behavior of large grains with embedded iron clusters giving rise to the observed high degree of alignment by the galactic magnetic field.

Wesselius, P. R.↗

Experimental and theoretical study of Ti-6Al-4V to 220 GPa

We report results from an experimental and theoretical study of the ternary alloy Ti-6Al-4V to 221 GPa. We observe a phase transition to the hexagonal {omega} phase at approximately 30 GPa, and then a further transition to the cubic {beta} phase starting at 94-99 GPa. We do not observe the orthorhombic {gamma} and {delta} phases reported previously in pure Ti. Computational studies show that this sequence is possible only if there is significant local atomic ordering during the compression process, yet insufficient atomic diffusion to reach the phase-separated thermodynamic equilibrium state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistive evolution of toroidal field distributions and their relation to magnetic clouds

We study the resistive evolution of a localized self-organizing magnetohydrodynamic equilibrium. In this configuration the magnetic forces are balanced by a pressure force caused by a toroidal depression in the pressure. Equilibrium is attained when this low-pressure region prevents further expansion into the higher-pressure external plasma. We find that, for the parameters investigated, the resistive evolution of the structures follows a universal pattern when rescaled to resistive time. The finite resistivity causes both a decrease in the magnetic field strength and a finite slip of the plasma fluid against the static equilibrium. This slip is caused by a Pfirsch–Schlüter-type diffusion, similar to what is seen in tokamak equilibria. The net effect is that the configuration remains in magnetostatic equilibrium whilst it slowly grows in size. The rotational transform of the structure becomes nearly constant throughout the entire structure, and decreases according to a power law. In simulations this equilibrium is observed when highly tangled field lines relax in a high-pressure (relative to the magnetic field strength) environment, a situation that occurs when the twisted field of a coronal loop is ejected into the interplanetary solar wind. In this study we relate this localized magnetohydrodynamic equilibrium to magnetic clouds in the solar wind.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of sorption-retarded U(VI) diffusion in Hanford silt/clay material

A diffusion cell method was developed to measure the effective aqueous diffusion coefficient for U(VI) under strictly controlled chemical conditions within the inter-particle pores of silt/clay sediment from the DOE Hanford site, WA. "Inward-flux” diffusion studies were conducted in which U(VI) concentrations in both aqueous and solid phases were measured as a function of distance into the cell under conditions of constant concentration at the cell boundaries. A sequential extraction method was developed to measure sorbed U(VI) content in the solid phase, while accounting for the non-negligible extractable background U(VI). U(VI) diffusion data were found to be consistent with a model that assumed that: 1) a single effective aqueous diffusion coefficient could be used to simulate the coupled diffusion of various aqueous U(VI) species, and 2) the local equilibrium assumption (LEA) is appropriate for modeling the effects of sorption under the given experimental conditions. An effective aqueous diffusion coefficient (De) of 1.6x10^-6 cm2/s was obtained under conditions of pH 8.0 and calcite saturation that are relevant to the subsurface conditions at some regions of the Hanford site. The developed experimental techniques provide a practical approach for measuring effective aqueous U(VI) diffusivity in sorptive porous media.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of diffusion and mass flows on C IV and Si IV lines formed in the solar atmosphere

A model for the transition region is derived from an initial interpretation of EUV observations, assuming ionization equilibrium and constant elemental abundance with height. The effects of diffusion and mass flows are then included in the initial model and the emergent profiles of several C IV and Si IV lines are computed. It is found that diffusion and mass flows have a strong effect on both the emergent intensity and spectral shape of these lines. Diffusion acts to deplete the transition region of heavy ions to an extent which depends on the detailed temperature and density structure. The net effect is a weighting of the coronal emission relative to that in the transition. On the basis of the results, it is suggested that the downflows observed in the network in lines of C IV and Si IV could be due to gravitational settling of the ions following their injection, via diffusion, into the corona from spicules. When flows are superposed on the basic diffusion model, the rapid change in elemental abundance characteristic of the model is virtually eliminated and the coronal contribution to the emission in C IV and Si IV lines becomes negligible relative to that in the transition region. Flows have a strong effect on the computed line intensities and introduce large asymmetries into the line shapes.

Roussel-Dupre, R.↗

TIME-DEPENDENT COROTATION RESONANCE IN BARRED GALAXIES

The effective potential neighboring the corotation resonance region in barred galaxies is shown to be strongly time-dependent in any rotating frame, due to the competition of nearby perturbations of similar strengths with differing rotation speeds. Contrary to the generally adopted assumption that in the bar rotating frame the corotation region should possess four stationary equilibrium points (Lagrange points), with high quality N -body simulations, we localize the instantaneous equilibrium points (EPs) and find that they circulate or oscillate broadly in azimuth with respect to the pattern speeds of the inner or outer perturbations. This implies that at the particle level the Jacobi integral is not well conserved around the corotation radius. That is, angular momentum exchanges decouple from energy exchanges, enhancing the chaotic diffusion of stars through the corotation region.

79 ASTRONOMY AND ASTROPHYSICS↗

Unconventional colloidal aggregation in chiral bacterial baths

Abstract When in equilibrium, thermal forces agitate molecules, which then diffuse, collide and bind to form materials. However, the space of accessible structures in which micron-scale particles can be organized by thermal forces is limited, owing to the slow dynamics and metastable states. Active agents in a passive fluid generate forces and flows, forming a bath with active fluctuations. Two unanswered questions are whether those active agents can drive the assembly of passive components into unconventional states and which material properties they will exhibit. Here we show that passive, sticky beads immersed in a bath of swimmingEscherichia colibacteria aggregate into unconventional clusters and gels that are controlled by the activity of the bath. We observe a slow but persistent rotation of the aggregates that originates in the chirality of theE. coliflagella and directs aggregation into structures that are not accessible thermally. We elucidate the aggregation mechanism with a numerical model of spinning, sticky beads and reproduce quantitatively the experimental results. We show that internal activity controls the phase diagram and the structure of the aggregates. Overall, our results highlight the promising role of active baths in designing the structural and mechanical properties of materials with unconventional phases.

Physics↗

Ab initio molecular dynamics simulations of liquid water using high quality meta-GGA functionals

We have used ab initio molecular dynamics (AIMD) to characterize water properties using two meta-generalized gradient approximation (meta-GGA) functionals, M06-L-D3 and B97M-rV, and compared their performance against a standard GGA corrected for dispersion, revPBE-D3, at ambient conditions (298 K, and 1 g cm –3 or 1 atm). Simulations of the equilibrium density, radial distribution functions, self-diffusivity, the infrared spectrum, liquid dipole moments, and characterizations of the hydrogen bond network show that all three functionals have overcome the problem of the early AIMD simulations that erroneously found ambient water to be highly structured, but they differ substantially among themselves in agreement with experiment on this range of water properties. We show directly using water cluster data up through the pentamer that revPBE-D3 benefits from a cancellation of its intrinsic functional error by running classical trajectories, whereas the meta-GGA functionals are demonstrably more accurate and would require the simulation of nuclear quantum effects to realize better agreement with all cluster and condensed phase properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monitoring equilibrium reaction dynamics of a nearly barrierless molecular rotor using ultrafast vibrational echoes

Using rapidly acquired spectral diffusion, a recently developed variation of heterodyne detected infrared photon echo spectroscopy, we observe ∼3 ps solvent independent spectral diffusion of benzene chromium tricarbonyl (C{sub 6}H{sub 6}Cr(CO){sub 3}, BCT) in a series of nonpolar linear alkane solvents. The spectral dynamics is attributed to low-barrier internal torsional motion. This tripod complex has two stable minima corresponding to staggered and eclipsed conformations, which differ in energy by roughly half of k{sub B}T. The solvent independence is due to the relative size of the rotor compared with the solvent molecules, which create a solvent cage in which torsional motion occurs largely free from solvent damping. Since the one-dimensional transition state is computed to be only 0.03 k{sub B}T above the higher energy eclipsed conformation, this model system offers an unusual, nearly barrierless reaction, which nevertheless is characterized by torsional coordinate dependent vibrational frequencies. Hence, by studying the spectral diffusion of the tripod carbonyls, it is possible to gain insight into the fundamental dynamics of internal rotational motion, and we find some evidence for the importance of non-diffusive ballistic motion even in the room-temperature liquid environment. Using several different approaches to describe equilibrium kinetics, as well as the influence of reactive dynamics on spectroscopic observables, we provide evidence that the low-barrier torsional motion of BCT provides an excellent test case for detailed studies of the links between chemical exchange and linear and nonlinear vibrational spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The CALPHAD approach for HEAs: Challenges and opportunities

Phases are key microstructural features that determine material properties. The most intuitive way of representing phase stability in a material is by its phase diagram. The vastness of the composition space is the most compelling reason for investigating high-entropy alloys (HEAs), but it also creates major challenges in controlling phases and microstructures of HEAs due to lack of experimental phase diagrams in highly concentrated multicomponent space. The CALPHAD (Calculation of Phase Diagram) approach, although it needs improvements, is the only viable way to calculate multicomponent phase diagrams. The two major property databases in CALPHAD, Gibbs energy and mobility, when coupled, can provide not only the equilibrium phase information, but also information about diffusion and kinetics. In this article, we will review the use of the CALPHAD approach in understanding phase stability and diffusion in high-entropy alloys. Finally, we will discuss the notable trend of coupling the high-throughput CALPHAD approach with machine learning in HEA design.

36 MATERIALS SCIENCE↗

Compatibility of buffered uranium carbides with tungsten.

Results of compatibility tests between tungsten and hyperstoichiometric uranium carbide alloys run at 1800 C for 1000 and 2500 hours. These tests compared tungsten-buffered uranium carbide with tungsten-buffered uranium-zirconium carbide. The zirconium carbide addition appeared to widen the homogeneity range of the uranium carbide, making additional carbon available for reaction. Reaction layers could be formed by either of two diffusion paths, one producing UWC2, while the second resulted in the formation of W2C. UWC2 acts as a diffusion barrier for carbon and slows the growth of the reaction layer with time, while carbon diffusion is relatively rapid in W2C, allowing equilibrium to be reached in less than 2500 hours at a temperature of 1800 C.

Phillips, W. M.↗

Finite-rate chemistry effects upon convective and radiative heating of an atmospheric entry vehicle

A mathematical model of the aerothermochemical environment along the stagnation line of a planetary return spacecraft using an ablative thermal protection system was developed and solved for conditions typical of atmospheric entry from planetary missions. The model, implemented as a FORTRAN 4 computer program, was designed to predict viscous, reactive and radiative coupled shock layer structure and the resulting body heating rates. The analysis includes flow field coupling with the ablator surface, binary diffusion, coupled line and continuum radiative and equilibrium or finite rate chemistry effects. The gas model used includes thermodynamic, transport, kinetic and radiative properties of air and ablation product species, including 19 chemical species and 16 chemical reactions. Specifically, the impact of nonequilibrium chemistry effects upon stagnation line shock layer structure and body heating rates was investigated.

Guillermo, P.↗