Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORECASTING MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Modern deep neural networks for Direct Normal Irradiance forecasting: A classification approach

The escalating energy demand and the adverse environmental impacts of fossil-fuel use necessitate a shift towards cleaner and renewable alternatives. Concentrated Solar Power (CSP) technology emerges as a promising solution, offering a carbon-free alternative for power generation. The efficiency and profitability of CSP depend on the Direct Normal Irradiance (DNI) component of solar radiation; hence, accurate DNI forecasting can help optimize CSP plants’ operations and performance. The unpredictable nature of weather phenomena, particularly cloud cover, introduces uncertainty into DNI projections. Existing DNI forecasting models use meteorological factors, which are both challenging to estimate numerically over short prediction windows and expensive to model through data at a sufficiently high spatial and temporal resolution. This research addresses the challenge by presenting a novel approach that formulates DNI prediction as a multi-class classification problem, departing from conventional regression-based methods. The primary objective of this classification framework is to identify optimal periods aligning with specific operational thresholds for CSP plants, contributing to enhanced dispatch optimization strategies. We model the DNI classification problem using four advanced deep neural networks – rectified linear unit (ReLU) networks, 1D residual networks (ResNets), bidirectional long short-term memory (BiLSTM) networks, and transformers – achieving accuracies up to 93.5% without requiring meteorological parameters.

14 SOLAR ENERGY↗

The Influence of Real-World Wind Turbine Deployments on Local to Mesoscale Climate

Paired simulations are conducted using the Weather Research and Forecasting model applied at convection permitting resolution in order to determine the impact of wind turbines (WTs) on the local to mesoscale climate. Using actual WT locations and a model of the effect of the WT rotor on the flow field, it is shown that while the presence of WT changes wind speeds (WSs) and near-surface air temperature in 4-km grid cells in which WTs are located, the impact at larger scales on near-surface air temperature, specific humidity, the fluxes of latent and sensible heat, boundary layer heights, and precipitation is not significant in any season other than summer. During summer, the maximum pairwise difference in grid cell mean temperatures is 0.5 K and the maximum increase in near-surface specific humidity is 0.4 g/kg. However, a spatial average of the mean seasonal perturbation of air temperature by WT gives a net impact of <0.1 K. Precipitation probability is also not significantly impacted in any season other than summer. In the summer the presence of WT is associated with a small decrease in precipitation probability and a decrease in season total precipitation of -2.6%. The finding of minor magnitude, but significant impacts, during summer should be used to contextualize results of substantial climate impacts from WT arrays deployed in the U.S. Central Plains based on short-term simulations conducted for the summer season.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity of Probable Maximum Flood in a Changing Environment

With likely increases in probable maximum precipitation (PMP) in a changing environment, critical infrastructures such as major reservoirs and nuclear power plants are subject to elevated risk. To understand how factors such as PMP variability, climate change, land use land cover (LULC) change, antecedent soil moisture conditions, and reservoir storage may individually or jointly affect the magnitude of probable maximum flood (PMF), we conducted integrated hydrometeorological simulations involving both the Weather Research Forecasting model and the distributed hydrologic model (DHSVM) over the Alabama–Coosa–Tallapoosa (ACT) River Basin in the southeastern United States. A total of 120 relative humidity–maximized PMP storms under historic and projected future climate conditions were used to drive DHSVM in current and projected future LULC conditions. Overall, PMP and PMF are projected to increase significantly over the ACT River Basin. Sources of meteorological forcing data sets and climate change were found to be the most sensitive factors affecting PMF, followed by antecedent soil moisture, reservoir storage, and then LULC change. In conclusion, the ensemble of PMP and PMF simulations, along with their sensitivity, allows us to better quantify the potential risks associated with hydroclimatic extreme events to critical infrastructures for energy–water security.

54 ENVIRONMENTAL SCIENCES↗

California's Drought of the Future: A Midcentury Recreation of the Exceptional Conditions of 2012–2017

The California drought of 2012–2016 was a record-breaking event with extensive social, political, and economic repercussions. The impacts were extensive and exposed the difficulty in preparing for the effects of prolonged dry conditions. Although the lessons from this drought drove important changes to state law and policy, there is little doubt that climate change will only exacerbate future droughts. To discern the character of future drought, this paper examines this recent drought period retrospectively and prospectively, that is, as it occurred historically and if similar dynamical conditions to the historical period were to arise 30 years later (2042–2046) subject to the effects of climate change. Simulations were conducted using the Weather Research and Forecasting model using the pseudo global warming method. The simulated historical and future droughts are contrasted in terms of temperature, precipitation, snowpack, soil moisture, evapotranspiration, and forest health. Overall, the midcentury drought is observed to be significantly worse, with many more extreme heat days, record-low snowpack, increased soil drying, and record-high forest mortality. With these findings in mind, the data sets developed in this study provide a means to structure future drought planning around a drought scenario that is realistic and modeled after a memorable historical analog.

54 ENVIRONMENTAL SCIENCES↗

Aerosol Impacts on Mesoscale Convective Systems Forming Under Different Vertical Wind Shear Conditions

Following our previous study of wind shear effect on mesoscale convective system (MCS) organization under a clean atmospheric condition using the Weather Research and Forecasting model coupled with Spectral-Bin Microphysics, we conduct sensitivity simulations by increasing cloud condensation nuclei (CCN) concentration and investigate aerosol impacts on MCSs forming under different wind shear conditions. We find that, aerosols induce stronger updrafts and downdrafts in all MCSs. The stronger updrafts and enlarged convective core area contribute to larger vertical mass fluxes and enhance precipitation, indicating convective invigoration. Increased updraft speed below 8-km altitude mainly results from enhanced condensational heating, and increased water loading effect is not large enough to overcome the increase in thermal buoyancy. Interestingly, above 8-km altitude we see reduced updraft speed by the increased aerosols due to reduced vertical pressure perturbation gradient force, and weakened depositional growth due to competition of water vapor by enhanced condensation. The accumulated rainfall and mean rain rate are increased, with an increased occurrence frequency of heavy rain. The increase of rain rate is seen in both convective and stratiform regions, with a more significant increase in convective rain rate. In general, we see a higher frequency of deep convective cloud in the polluted condition because of invigorated convection, and more stratiform/anvil clouds, but a lower frequency of shallow warm clouds. The unanimously invigorated MCSs by aerosols under various wind shear conditions revealed by this study has an important implication in weather and climate at warm and humid regions that are influenced by pollution.

54 ENVIRONMENTAL SCIENCES↗

Structure and Evolution of Mesoscale Convective Systems: Sensitivity to Cloud Microphysics in Convection‐Permitting Simulations Over the United States

Abstract Regional climate simulations over the continental United States were conducted for the 2011 warm season using the Weather Research and Forecasting model at convection‐permitting resolution (4 km) with two commonly used microphysics parameterizations (Thompson and Morrison). Sensitivities of the simulated mesoscale convective system (MCS) properties and feedbacks to large‐scale environments are systematically examined against high‐resolution geostationary satellite and 3‐D mosaic radar observations. MCS precipitation including precipitation amount, diurnal cycle, and distribution of hourly precipitation intensity are reasonably captured by the two simulations despite significant differences in their simulated MCS properties. In general, the Thompson simulation produces better agreement with observations for MCS upper level cloud shield and precipitation area, convective feature horizontal and vertical extents, and partitioning between convective and stratiform precipitation. More importantly, Thompson simulates more stratiform rainfall, which agrees better with observations and results in top‐heavier heating profiles from robust MCSs compared to Morrison. A stronger dynamical feedback to the large‐scale environment is therefore seen in Thompson, wherein an enhanced mesoscale vortex behind the MCS strengthens the synoptic‐scale trough and promotes advection of cool and dry air into the rear of the MCS region. The latter prolongs the MCS lifetimes in the Thompson relative to the Morrison simulations. Hence, different treatment of cloud microphysics not only alters MCS convective‐scale dynamics but also has significant impacts on their macrophysical properties such as lifetime and precipitation. As long‐lived MCSs produced 2–3 times the amount of rainfall compared to short‐lived ones, cloud microphysics parameterizations have profound impact in simulating extreme precipitation and the hydrologic cycle.

54 ENVIRONMENTAL SCIENCES↗

A Retrospective and Prospective Examination of the 1960s U.S. Northeast Drought

As the most severe drought over the Northeastern United States (NEUS) in the past century, the 1960s drought had pronounced socioeconomic impacts. Although it was followed by a persisting wet period, the conditions leading to the 1960s extreme drought could return in the future, along with its challenges to water management. To project the potential consequences of such a future drought, pseudo-global warming simulations using the Weather Research and Forecasting Model are performed to simulate the dynamical conditions of the historical 1960s drought, but with modified thermodynamic conditions under the shared socioeconomic pathway SSP585 scenario in the early (2021–2027), middle (2041–2047), and late (2091–2097) 21st century. Our analysis focuses on essential hydroclimatic variables including temperature, precipitation, evapotranspiration, soil moisture, snowpack, and surface runoff. In contrast to the historical 1960s drought, similar dynamical conditions will generally produce more precipitation, increased soil moisture and evapotranspiration, and reduced snowpack. However, we also find that although wet months get much wetter, dry months may become drier, meaning that wetting trends are most significant in wet months but are essentially negligible for extremely dry months with negative monthly mean net precipitation. For these months, the trend toward wetting conditions provides little relief from the effects of extreme dry months. These conditions may even aggravate water shortages due to an increasingly rapid transition from wet to dry conditions. Other challenges emerge for residents and stakeholders in this region, including more extreme hot days, record-low snow pack, frozen ground degradation and subsequent decreases in surface runoff.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Surface Heterogeneity-Induced Convection Using Cluster Analysis

Land-atmosphere interactions and boundary layer processes often control the formation of shallow clouds and subsequently deep convective precipitation over the Southern Great Plains. In this study, we examine the impacts of large-scale advection on the cloud populations and land-atmospheric coupling observed during the Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems (HI-SCALE) field campaign in 2016. In this work, we performed two Large Eddy Simulations (LES) using the Weather Research and Forecasting Model for a day in which the transition from clear-sky to shallow precipitating clouds and isolated deep convection was observed. The control simulation reproduced the overall distribution of cloud populations by using realistic soil conditions with an interactive land model. In the sensitivity simulation where large-scale advection is removed, a strong relationship between the land and boundary layer is found. To study the timing, location, and intensity of convective initiation and the relationship of clouds with land surface properties, a cluster analysis of equivalent potential temperature is performed for the simulation without large-scale advection. That analysis shows that convective clouds first form over regions with higher surface sensible heat flux. Precipitation from those convective clouds likely triggers new updrafts nearby about two hours later through the lifting associated with cold pools. Furthermore, the cluster analysis also shows that in addition to the spatial pattern of soil moisture, land use and soil texture in western Oklahoma also influence the location of convective initiation.

54 ENVIRONMENTAL SCIENCES↗

Impacts of Latent Energy and Snow Fall Speed on a Wintertime Midlatitude Cyclone

This study aimed to understand the impacts of latent energy as well as snow fall speeds on precipitation properties and synoptic-scale storm characteristics of a wintertime midlatitude cyclone. Simulations of a potent winter storm that impacted the Rocky Mountains and northern Great Plains of the United States in February 2017 were performed using the Weather Research and Forecasting model with latent heating or cooling from individual microphysical processes systematically turned off and fall speeds adjusted by ±50%. Results indicated substantial impacts on the microphysical characteristics of the simulated storm to fall speed, cooling from sublimation, and warming from deposition. The impacts of cooling and warming were manifested as differences in accumulated snowfall. Increased (decreased) fall speeds led to smaller (larger) ice crystals and total mass, resulting in offsetting effects on the precipitation flux, and thus minimal impacts on snowfall and large-scale characteristics of the storm. Warming and cooling associated with deposition and sublimation, respectively, impacted the synoptic-scale dynamics, whereby removing warming from deposition resulted in an increased meridional temperature gradient near the jet stream, thus increasing the jet strength and causing it to be more westerly with less curvature aloft. This in turn limited upper-level divergence, creating a weaker surface low and shifting the precipitation shield southward. The opposite occurred with the removal of latent cooling due to sublimation. This study highlights the potential importance of latent energy associated with ice sublimation and deposition and fall speeds in the larger-scale characteristics of winter storms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Amazon and La Plata River Basins as Moisture Sources of South America: Climatology and Intraseasonal Variability

Abstract Land‐atmosphere interactions are critical for precipitation (PPT) over South America where terrestrial evapotranspiration (ET) constitutes a significant fraction of moisture for rainfall over the ecologically and socio‐economically vital Amazon (AMZ) and La Plata (LPB) river basins. We quantify the contribution of ET from AMZ and LPB to PPT over the continent with a focus on the intraseasonal time scale. Using numerical water tracers embedded in the Weather Research and Forecasting model we track the moisture originating from the two basins. Our findings indicate that approximately 40% of annual rainfall over the eastern foothills of the Andes originates as AMZ ET, and nearly 30% of rainfall over northern Argentina originates as LPB ET. Analysis of moisture transport during both phases of the dominant intraseasonal oscillation pattern over South America reveals an intraseasonal “sloshing” of LPB moisture between the South Atlantic convergence zone (SACZ) and southeastern South America (SESA) regions. AMZ and LPB each supply approximately 6% of moisture for SACZ PPT during periods of intraseasonal enhancement (positive anomalies), highlighting the importance of moisture from the Atlantic Ocean. For the SESA region, LPB supplies 26% of the moisture for PPT during periods of intraseasonal enhancement while AMZ supplies 5%.

54 ENVIRONMENTAL SCIENCES↗

Impacts of Large-Scale Urbanization and Irrigation on Summer Precipitation in the Mid-Atlantic Region of the United States

This study investigates how urbanization and irrigation in the United States east of the Rocky Mountains affect summer precipitation in the Mid-Atlantic region (MAR) using convection-permitting Weather Research and Forecasting model simulations with/without urbanization or irrigation. In this work, a feature tracking algorithm is used to identify precipitation from mesoscale convective systems (MCSs), isolated deep convection (IDC), and non-convective systems (NC). Overall, urbanization suppresses all three types of precipitation in the MAR by reducing water vapor content and convective available potential energy, while irrigation enhances IDC and NC precipitation but suppresses MCS precipitation. Examination of the MCS and IDC initiation locations indicates that irrigation suppresses MAR precipitation that is produced by MCSs initiated in the Great Plains and Midwest (GP) but enhances MAR precipitation from MCSs initiated locally within the region. Irrigation induces a mid-level cyclonic circulation anomaly centering in the Southeast, hindering the eastward propagation and development of MCSs from the GP.

54 ENVIRONMENTAL SCIENCES↗

Aerosol Indirect Effects on Water Vapor in the UTLS of Typhoon Saomai (2006)

The evolution of landfalling Typhoon Saomai (2006) is simulated using the Weather Research and Forecasting model with spectral bin microphysics scheme, showing tropical cyclone (TC) could vertically transport water vapor from troposphere to upper troposphere and lower stratosphere (UTLS). Three aerosol sensitivity experiments are conducted to explore the indirect effects of aerosol served as cloud condensation nuclei (CCN) on overshooting convection (OTC) and water vapor content in UTLS, namely MAR (maritime), MIX (semi‐continental) and CON (continental). Results revealed that CON simulation with high initial aerosol concentration showing invigorated convection at the periphery of the TC, which interfered with the reformation of TC eyewall, leading to TC weakening finally. In addition, CON simulated the least water content in UTLS through suppressing the number of convection overshooting the tropopause level. Most overshooting events take place during TC developing stage in the eyewall region before landfall. Higher levels of CCN concentration could lead to decreased number of OTC in TC, consistently reduced the water vapor content in UTLS. CON and MIX experiments simulated respectively 21.9% (16.2%) and 9.96% (1.5%) less OTC (water vapor content in UTLS) than MAR simulation. Further, water vapor content in UTLS is affected by the interaction of OTC and ice‐phase microphysics. The interesting point is that the CCN sensitivity experiments show that water vapor content in UTLS of a TC is sensitive to the CCN concentration in the boundary layer.

54 ENVIRONMENTAL SCIENCES↗

The Contribution of Subtropical Moisture Within an Atmospheric River on Moisture Flux, Cloud Structure, and Precipitation Over the Salmon River Mountains of Idaho Using Moisture Tracers

The impact of an atmospheric river (AR) on the flux of subtropical moisture across Idaho's Salmon River Mountains and precipitation over the mountains is evaluated using the Weather, Research, and Forecasting model with water vapor tracers (WRF-WVT). The AR impacted Idaho between 17 and 19 January 2017 during the Seeded and Natural Orographic Wintertime Clouds: The Idaho Experiment (SNOWIE) campaign. WRF-WVT is configured to isolate the subtropical moisture contribution to the AR, the moisture flux, and precipitation. Subtropical water vapor advected by the AR into Idaho is tagged and tracked in three-dimensional space throughout the run. This allows the contribution of the subtropical moisture to the vertical distribution of water vapor and the precipitation to be directly calculated. The simulated cloud structure is compared with airborne radar data collected during two SNOWIE intensive operation periods. This study found that more than 70% of the moisture flux and more than 80% of the precipitation across the Idaho Mountains during SNOWIE IOP 4 could be attributed to subtropical moisture within the AR. Nearly all of the moisture flux in the upper cloud and 50% of the moisture in the lower cloud was attributable to the subtropical moisture. The subtropical moisture contribution within the AR to precipitation ranged from 35% in northern Idaho to more than 90% in southern Idaho. Across the entire period of impact of the AR, more than 60% of precipitation in Idaho was attributable to the subtropical moisture within the AR, with this percentage increasing toward the south across the state.

54 ENVIRONMENTAL SCIENCES↗

Exploring the Meteorological Impacts of Surface and Rooftop Heat Mitigation Strategies Over a Tropical City

Different heat mitigation technologies have been developed to improve the thermal environment in cities. However, the regional impacts of such technologies, especially in the context of a tropical city, remain unclear. The deployment of heat mitigation technologies at city-scale can change the radiation balance, advective flow, and energy balance between urban areas and the overlying atmosphere. We used the mesoscale Weather Research and Forecasting model coupled with a physically based single-layer urban canopy model to assess the impacts of five different heat mitigation technologies on surface energy balance, standard surface meteorological fields, and planetary boundary layer (PBL) dynamics for premonsoon typical hot summer days over a tropical coastal city in the month of April in 2018, 2019, and 2020. Results indicate that the regional impacts of cool materials (CMs), super-cool broadband radiative coolers, green roofs (GRs), vegetation fraction change, and a combination of CMs and GRs (i.e., “Cool city (CC)”) on the lower atmosphere are different at diurnal scale. Results showed that super-cool materials have the maximum potential of ambient temperature reduction of 1.6°C during peak hour (14:00 LT) compared to other technologies in the study. During the daytime hours, the PBL height was considerably lower than the reference scenario with no implementation of strategies by 700 m for super-cool materials and 500 m for both CMs and CC cases; however, the green roofing system underwent nominal changes over the urban area. During the nighttime hours, the PBL height increased by CMs and the CC strategies compared to the reference scenario, but minimal changes were evident for super-cool materials. The changes of temperature on the vertical profile of the heat mitigation implemented city reveal a stable PBL over the urban domain and a reduction of the vertical mixing associated with a pollution dome. This would lead to crossover phenomena above the PBL due to the decrease in vertical wind speed. Therefore, assessing the coupled regional impact of urban heat mitigation over the lower atmosphere at city-scale is urgent for sustainable urban planning.

54 ENVIRONMENTAL SCIENCES↗

Improved Simulations of Atmospheric River Climatology and Variability in High-Resolution CESM

Atmospheric rivers (ARs) can trigger extreme rainfall and snowfall events, causing high risk of flooding. Meanwhile, they are sometimes responsible for the occurrence and break of drought events. So, it is of great importance for weather and climate forecast models to accurately represent ARs. Studies have shown that AR variability is linked to various climate modes, such as El Niño/Southern Oscillation, Pacific Decadal Oscillation, Pacific-North America pattern, providing the potential for predicting ARs at subseasonal-to-decadal timescales. In this study, we examine the impact of climate model resolution on AR simulations and their relationship with major climate modes by comparing a pair of high-resolution and a low-resolution (LR) Community Earth System Model (CESM) simulations against the observations. The results reveal major deficiencies in LR that include underestimated climatological AR strength and associated precipitation, and inaccurate representations of ARs relationships with climate modes. Significant improvements are observed by increasing CESM horizontal resolution, suggesting a path for more accurate prediction of ARs.

54 ENVIRONMENTAL SCIENCES↗

Simulating the Transport and Rupture of Pollen in the Atmosphere

Pollen, one type of primary biological aerosol particle (PBAP), is emitted from the terrestrial biosphere and can undergo physical changes in the atmosphere via particle rupture. To examine the fate of pollen and its atmospheric processing, a pollen emission and transport scheme is coupled to the Weather Research and Forecasting Model with Chemistry (WRF-Chem). We simulate the emission of pollen and its impacts on the cloud properties and precipitation in the Southern Great Plains from 12 to 19 April 2013, a period with both high pollen emissions and convective activity. We conduct a suite of ensemble runs that simulate primary pollen and three different pollen rupture mechanisms that generate subpollen particles, including (a) high humidity-induced surface rupture, (b) high humidity-induced in-atmosphere plus surface rupture, and (c) lightning-induced rupture, where in-cloud and cloud-to-ground lightning strikes trigger pollen rupture events. When relative humidity is high (>80%), coarse primary pollen (~1 μg m –3 ) is converted into fine subpollen particles (~1.2e –4 μg m –3 ), which produces 80% more subpollen particles than lightning-induced rupture. The in-atmosphere humidity-driven rupture predominantly produces subpollen particles, which is further enhanced during a frontal thunderstorm. During strong convection, vertical updrafts lift primary pollen and subpollen particles (~0.5e –4 μg m –3 ) to the upper troposphere (~12 km) and laterally transports the ruptured pollen in the anvil top outflow. In regions of high pollen and strong convection, ruptured pollen can influence warm cloud formation by decreasing low cloud (<4 km) cloud water mixing ratios and increasing ice phase hydrometeors aloft (>10 km)

54 ENVIRONMENTAL SCIENCES↗

Tracing the Rain Formation Pathways in Numerical Simulations of Deep Convection

Quantifying the microphysical process contributions to surface precipitation in numerical simulations can be challenging. This is due to the fact that many microphysical processes contribute to the formation and depletion of rain drops and there is almost always a spatial/temporal mismatch between where/when rain is formed and where/when it strikes the surface. In this work, we develop a tracing method that tracks the sources and sinks of raindrop mass and number as they are advected by the Weather Research and Forecasting model. Applying the method to an idealized squall line confirms that convective precipitation is dominated by warm rain processes (autoconversion and accretion) while stratiform precipitation is dominated by the melting of rimed and unrimed ice crystals. Sensitivity experiments in which the prescribed cloud drop number concentration is increased confirm the conventional wisdom that weakened autoconversion increases the fraction of raindrops originating from cold rain processes. The method also reveals that when applied to deep convection the Khairoutdinov and Kogan autoconversion scheme produces an excessive number of raindrops which are subsequently clipped in P3 microphysics to keep the rain size distribution within prescribed limits. This problem can mostly be mitigated by increasing the assumed radius for raindrops created by autoconversion.

58 GEOSCIENCES↗

Wind Fields in Category 1–3 Tropical Cyclones Are Not Fully Represented in Wind Turbine Design Standards

Abstract Offshore wind energy deployment in the U.S. is expected to increase in the years to come, with proposed wind farm sites located in regions with high risk for tropical cyclones. Yet, the wind turbine design criteria outlined by the International Electrotechnical Commission for extreme events may not account for wind field characteristics unique to tropical cyclones. To evaluate if current design standards capture the extreme conditions of these storms, we perform idealized large‐eddy simulations of three tropical cyclones (one Category 1, one Category 2, and one Category 3 storms) using the Weather Research and Forecasting model. Wind conditions near the eyewall of Cat‐1, Cat‐2, and Cat‐3 storms can exceed current design standards for offshore wind turbines. Winds at 90 m can be faster than outlined in the design criteria for Class I and Class T turbines for 50‐year recurrence periods. Wind speed shear across the turbine rotor layer is also larger than assumed in design specifications. Moreover, vertical variations in wind direction across the turbine rotor layer are large for tropical cyclones of all intensity levels, suggesting design standards should include veer, which can amplify loads in wind turbines. The existence of hurricane wind field characteristics that are not represented in design standards does not imply that damage or failure will certainly occur. Engineering safety factors incorporated in the design of the turbine's blades and structural components may prevent damage from occurring.

17 WIND ENERGY↗