Search NASA⌕ Search

SEARCH · Search NASA

Results for “FRACTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Construction of 2D quasi-periodic Rauzy tiling by similarity transformation

A new approach to constructing self-similar fractal tilings is proposed based on the construction of semigroups generated by a finite set of similarity transformations. The Rauzy tiling-a 2D analog of 1D Fibonacci tiling generated by the golden mean-is used as an example to illustrate this approach. It is shown that the Rauzy torus development and the elementary fractal boundary of Rauzy tiling can be constructed in the form of a set of centers of similarity semigroups generated by two and three similarity transformations, respectively. A centrosymmetric tiling, locally dual to the Rauzy tiling, is constructed for the first time and its parameterization is developed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the tripoli porous structure by small-angle neutron scattering

The characteristics of the tripoli porous structure have been investigated by small-angle neutron scattering (SANS). Tripoli is a finely porous sedimentary rock formed by small spherical opal particles. Its main component is aqueous silica SiO{sub 2} {center_dot} nH{sub 2}O (80-90%). Tripoli is widely used in practice as a working medium for sorption filters and in some other commercial and construction technologies. The shape of the experimental SANS curves indicates the presence of small and large pores in tripoli. The small-pore size was estimated to be {approx}100 Angstrom-Sign . The size of large pores turned out to be beyond the range of neutron wave vector transfers Q that are available for the instrument used; however, their size was indirectly estimated to be {approx}(2000-2500) Angstrom-Sign . The pores of both groups behave as surfacetype fractal scatterers with the fractal dimension D {approx} 2.2-2.6. The densities of pores of these two groups differ by approximately three orders of magnitude ({approx}10{sup 16} and {approx}10{sup 13} cm{sup -3} for small and large pores, respectively); the fraction of large pores amounts to 70-80% of the total pore volume. The found pore characteristics (their densities, sizes, and relative volumes) are in satisfactory agreement (when a comparison is possible) with the absorption data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analytical model of brittle destruction based on hypothesis of scale similarity

The size distribution of dust particles in thermonuclear (fusion) devices is closely described by a power law, which may be related to the brittle destruction of materials. The hypothesis of scale similarity leads to the conclusion that the size distribution of particles formed as a result of a brittle destruction is described by a power law with the exponent -{alpha} that can range from -4 to -1. The model of brittle destruction is described in terms of the fractal geometry, and the distribution exponent is expressed via the fractal dimension of packing. Under additional assumptions, it is possible to refine the {alpha} value and, vice versa, to determine the type of destruction using the measured size distribution of particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Limitations in Determining Multifractal Spectra from Pore-Solid Soil Aggregate Images

Multifractal methods have the potential to be useful tools for characterizing spatial distributions of soil pores from microtomographic images of undisturbed soil cores and soil aggregates. The objective of this study was to examine the limitations of multifractal analyses in binary (void and solid) soil images and to explore conditions under which multifractal spectra can be obtained. Multifractal characteristics of binary soil images are bounded within certain limiting values corresponding to nonfractal scaling. In this study, we first addressed the theoretical limitations of multifractal analysis of binary images and examined the nonfractal scaling boundaries in multifractal calculations by the method of moments. Then we developed boundary conditions for multifractal calculations by the direct method. Results revealed that fractal scaling is potentially possible only across a relatively narrow range of cell sizes restricted by the nonfractal scaling boundaries. Moreover, the range of cell sizes where fractal scaling is potentially possible varies with pore size. That is, in multifractal calculations it changes continuously with changes in the q value. For the soil aggregates examined in this study, this range varied from two to eight pixels for low q values to 128 pixels for high q values. The varying range makes calculations of true multifractal spectra for binary soil image data impossible. These results are consistent with a general theoretical notion that binary soil images are not multifractal in a strict mathematical sense. We suggest, however, that application of multifractal formalism can generate 'pseudo-multifractal spectra' that might still be useful for summarizing pore distribution information and for comparing pore data among different agricultural management regimes and soil type.

54 ENVIRONMENTAL SCIENCES↗

Preface: Nonclassical Transport

Transport phenomena in highly heterogeneous media can be dramatically different from those in homogeneous media and therefore are of great fundamental and practical interest. Anomalous transport occurs in semiconductor physics, plasma physics, astrophysics, biology, and other areas. It plays an especially important role in hydrogeology because it may govern the rate of migration and degree of dispersion of groundwater contaminants from hazardous waste sites. The series of four articles in this special section of Vadose Zone Journal is devoted to transport phenomena in heterogeneous media in the context of geologic disposal of radioactive waste. It contains the results of joint investigations performed at the Nuclear Safety Institute of the Russian Academy of Sciences and Lawrence Berkeley National Laboratory in California. The work was supported by the U.S. DOE (under Contract No. DEAC02-05CH11231). The problems addressed in this research involve a broad range of space and time scales and were approached using modern methods of theoretical and computational physics, such as scaling analysis and diagrammatic techniques used before in critical phenomena theory. Special attention is paid to the asymptotics of concentration behavior (concentration tails). This issue is exceptionally important for the reliability assessments of radioactive waste disposal because, depending on the structure of the tails, concentrations at large distances from the source can differ by many orders of magnitude. In the first paper of this special section, Bolshov et al. (2008b) present an overview of field and laboratory observations that demonstrate nonclassical flow and transport behavior in geologic media. It is recognized that natural fracture networks as a rule have fractal geometry and can be classified as percolation systems. This is one of the main factors giving rise to anomalous transport in geologic media. Another important factor is the presence of contaminant traps provided by low-permeable rock matrix and dead-ends of fracture percolation clusters. Physical concepts to describe transport phenomena in fractured rocks are discussed. The second paper (Dykhne et al., 2008) is devoted to the analysis of diffusion in heterogeneous media with sharply contrasting properties. The authors show that as time progresses, three different transport regimes can be realized in the model. Here, an intermediate regime corresponds to subdiffusion. The change of regimes results in a complex structure of concentration tails, with the shapes of the more-distant tail segments determined by earlier-time transport behavior. In the third paper (Bolshov et al., 2008a), new elements are developed to generalize the dual-porosity model for moisture infiltration and solute transport in unsaturated rocks, taking into account fractal aspects of the percolation process. It is shown that the solute transport regime is determined by a competition of two mechanisms: random advection through a fracture network and trapping caused by sharply contrasting properties of the medium. As a result, superdiffusive, subdiffusive, or classical diffusive regimes may occur. The complex structure of concentration tails and effects due to medium characteristic fluctuations is also discussed. In the fourth paper, Goloviznin et al. (2008) develop a stochastic random walk numerical model of anomalous diffusion to simulate solute transport in highly heterogeneous media. Solutions of the one- and symmetric two-dimensional stochastic problem are compared with computations performed on the basis of fractional advection--diffusion equation models. The new model is in reasonable agreement with experimental data on solute transport in highly heterogeneous media.

54 ENVIRONMENTAL SCIENCES↗

Characterization of deep weathering and nanoporosity development in shale - a neutron study

We used small-angle and ultra-small-angle neutron scattering (SANS/USANS) to characterize the evolution of nanoscale features in weathering Rose Hill shale within the Susquehanna/Shale Hills Observatory (SSHO). The SANS/USANS techniques, here referred to as neutron scattering (NS), characterize porosity comprised of features ranging from approximately 3 nm to several micrometers in dimension. NS was used to investigate shale chips sampled by gas-powered drilling ('saprock') or by hand-augering ('regolith') at ridgetop. At about 20 m depth, dissolution is inferred to have depleted the bedrock of ankerite and all the chips investigated with NS are from above the ankerite dissolution zone. NS documents that 5--6% of the total ankerite-free rock volume is comprised of isolated, intraparticle pores. At 5 m depth, an abrupt increase in porosity and surface area corresponds with onset of feldspar dissolution in the saprock and is attributed mainly to peri-glacial processes from 15 000 years ago. At tens of centimeters below the saprock-regolith interface, the porosity and surface area increase markedly as chlorite and illite begin to dissolve. These clay reactions contribute to the transformation of saprock to regolith. Throughout the regolith, intraparticle pores in chips connect to form larger interparticle pores and scattering changes from a mass fractal at depth to a surface fractal near the land surface. Pore geometry also changes from anisotropic at depth, perhaps related to pencil cleavage created in the rock by previous tectonic activity, to isotropic at the uppermost surface as clays weather. In the most weathered regolith, kaolinite and Fe-oxyhydroxides precipitate, blocking some connected pores. These precipitates, coupled with exposure of more quartz by clay weathering, contribute to the decreased mineral-pore interfacial area in the uppermost samples. These observations are consistent with conversion of bedrock to saprock to regolith at SSHO due to: (1) transport of reactants (e.g., water, O{sub 2}) into primary pores and fractures created by tectonic events and peri-glacial effects; (2) mineral-water reactions and particle loss that increase porosity and the access of water into the rock. From deep to shallow, mineral-water reactions may change from largely transport-limited where porosity was set largely by ancient tectonic activity to kinetic-limited where porosity is changing due to climate-driven processes.

58 GEOSCIENCES↗

Mechanisms of radiation degradation of solar cells based on organic-inorganic perovskites

The basic processes of perovskite radiation resistance are discussed for photo- and high-energy electron irradiation. It is shown that ionization of iodine ions and a staged mechanism of elastic scattering (upon intermediate scattering on light ions of an organic molecule) lead to the formation of a recombination center I{sub i}. The features of ionization degradation of interfaces with both planar and fractal structures are considered. A special type of fractality is identified, and its minimum possible level of photodegradation is predicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geometrical description in binary composites and spectral density representation

In this review, the dielectric permittivity of dielectric mixtures is discussed in view of the spectral density representation method. A distinct representation is derived for predicting the dielectric properties, permittivities {var_epsilon}, of mixtures. The presentation of the dielectric properties is based on a scaled permittivity approach, {zeta} = ({var_epsilon}{sub e} - {var_epsilon}{sub m})({var_epsilon}{sub i} - {var_epsilon}{sub m}){sup -1}, where the subscripts e, m and i denote the dielectric permittivities of the effective, matrix and inclusion media, respectively [Tuncer, E. J. Phys.: Condens. Matter 2005, 17, L125]. This novel representation transforms the spectral density formalism to a form similar to the distribution of relaxation times method of dielectric relaxation. Consequently, I propose that any dielectric relaxation formula, i.e., the Havriliak-Negami empirical dielectric relaxation expression, can be adopted as a scaled permittivity. The presented scaled permittivity representation has potential to be improved and implemented into the existing data analyzing routines for dielectric relaxation; however, the information to extract would be the topological/morphological description in mixtures. To arrive at the description, one needs to know the dielectric properties of the constituents and the composite prior to the spectral analysis. To illustrate the strength of the representation and confirm the proposed hypothesis, the Landau-Lifshitz/Looyenga (LLL) [Looyenga, H. Physica 1965, 31, 401] expression is selected. The structural information of a mixture obeying LLL is extracted for different volume fractions of phases. Both an in-house computational tool based on the Monte Carlo method to solve inverse integral transforms and the proposed empirical scaled permittivity expression are employed to estimate the spectral density function of the LLL expression. The estimated spectral functions for mixtures with different inclusion concentration compositions show similarities; they are composed of a couple of bell-shaped distributions, with coinciding peak locations but different heights. It is speculated that the coincidence in the peak locations is an absolute illustration of the self-similar fractal nature of the mixture topology (structure) created with the LLL expression. Consequently, the spectra are not altered significantly with increased filler concentration level - they exhibit a self-similar spectral density function for different concentration levels. Last but not least, the estimated percolation strengths also confirm the fractal nature of the systems characterized by the LLL mixture expression. It is concluded that the LLL expression is suitable for complex composite systems that have hierarchical order in their structure. These observations confirm the finding in the literature.

36 MATERIALS SCIENCE↗

Explaining the stellar initial mass function with the theory of spatial networks

The distributions of stars and prestellar cores by mass (initial and dense core mass functions, IMF/DCMF) are among the key factors regulating star formation and are the subject of detailed theoretical and observational studies. Results from numerical simulations of star formation qualitatively resemble an observed mass function, a scale-free power law with a sharp decline at low masses. However, most analytic IMF theories critically depend on the empirically chosen input spectrum of mass fluctuations which evolve into dense cores and, subsequently, stars, and on the scaling relation between the amplitude and mass of a fluctuation. Here we propose a new approach exploiting techniques from the field of network science. We represent a system of dense cores accreting gas from the surrounding diffuse interstellar medium (ISM) as a spatial network growing by preferential attachment and assume that the ISM density has a self-similar fractal distribution following the Kolmogorov turbulence theory. We effectively combine gravoturbulent and competitive accretion approaches and predict the accretion rate to be proportional to the dense core mass: dM/dt∝M. Then we describe the dense core growth and demonstrate that the power-law core mass function emerges independently of the initial distribution of density fluctuations by mass. Our model yields a power law solely defined by the fractal dimensionalities of the ISM and accreting gas. With a proper choice of the low-mass cut-off, it reproduces observations over three decades in mass. We also rule out a low-mass star dominated “bottom-heavy” IMF in a single star-forming region.

79 ASTRONOMY AND ASTROPHYSICS↗

Identification of Accretion as Grain Growth Mechanism in Astrophysically Relevant Water–Ice Dusty Plasma Experiment

The grain growth process in the Caltech water–ice dusty plasma experiment has been studied using a high-speed camera and a long-distance microscope lens. It is observed that (i) the ice grain number density decreases fourfold as the average grain major axis increases from 20 to 80 μ m, (ii) the major axis length has a log-normal distribution rather than a power-law dependence, and (iii) no collisions between ice grains are apparent. The grains have a large negative charge resulting in strong mutual repulsion and this, combined with the fractal character of the ice grains, prevents them from agglomerating. In order for the grain kinetic energy to be sufficiently small to prevent collisions between ice grains, the volumetric packing factor (i.e., ratio of the actual volume to the volume of a circumscribing ellipsoid) of the ice grains must be less than ∼0.1 depending on the exact relative velocity of the grains in question. Thus, it is concluded that direct accretion of water molecules is very likely to dominate the observed ice grain growth.

79 ASTRONOMY AND ASTROPHYSICS↗

X-ray Vision for Aerosol Scientists: LCLS Snapshots of Soot (Narrated)

This short conceptual animation depicts how scientists can now simultaneously capture fractal morphology (structure), chemical composition and nanoscale imagery of individual aerosol particles in flight. These particles, known as "PM2.5" because they are smaller than 2.5 microns in diameter, affect climate by interacting with sunlight and impact human health by entering the lungs. The single LCLS laser pulses travel to the Atomic, Molecular and Optical Sciences (AMO) laboratory in the Near Experimental Hall. As we zoom in, we see deep inside a simplified aerosol inlet, where the complex fractal structure of the soot particles, each one completely unique, is shown. Individual soot particles are then delivered into the pulses of the LCLS beam, which destroys them. X-rays are scattered to the detector before the particle is destroyed, giving information about the morphology of the particle. Ion fragments released in the explosion are sent into a mass spectrometer, which measures their mass-to-charge ratio -- giving scientists information about the chemical composition of the particle. Many different particles are analyzed in this manner, allowing scientists to probe variations in the particles due to changes in their environment before being sent through the aerosol inlet. The final visual of aerosols emitted from a factory is representative of the goal that such LCLS aerosol dynamics experiments can provide critical feedback into modeling and understanding combustion, aerosol processes in manufacturing or aerosol effects on climate change.

60 APPLIED LIFE SCIENCES↗

A macroscopic relationship for preferential flow in the vadose zone: Theory and Validation

Preferential flow commonly observed in unsaturated soils allows rapid movement of solute from the ground surface or vadose zone to the groundwater, bypassing a significant volume of unsaturated soil and increasing the risk of groundwater contamination. A variety of evidence indicates that complex preferential flow patterns observed from fields are fractals. This paper discusses a macroscopic rela-tionship for modeling preferential flow in the vadose zone. Conceptually, the flow domain can be di-vided into active and inactive regions. Flow occurs preferentially in the active region (characterized by fractals), and inactive region is simply bypassed. The portion of the active region was found to be a power function of saturation. The validity of this macroscopic relationship is demonstrated by its consistency with field observations and the related numerical experiments.

54 ENVIRONMENTAL SCIENCES↗

Analysis of the Pore Structures of Shale Using Neutron and X-Ray Small Angle Scattering

Analysis of the multi-scale pore structures of shale is of critical importance to understanding their role as caprocks and oil/gas reservoirs, as well as their contribution to global elemental cycles because of weathering. While several techniques have been employed to understand these structures, small angle neutron and X-ray scattering, which can quantify several features of the pore structure from the nanometer scale to tens of microns, provides a unique perspective not found in more standard petrophysical approaches. Although large-scale regional studies using this approach are not yet available, over 30 years of work have led to a number of important conclusions. Among the results obtained are data suggesting that multi-scale pores structures, even of less fissile shales, are highly asymmetric. However, this is both scale and maturity dependent. Pore surfaces commonly exhibit highly rough surface fractals, which often smooth with diagenetic alteration and weathering. Mass fractal behavior of larger-scale interpore structures has also been observed. In many cases, pore structures are bimodal, reflecting interlayer spacing in clays at the smaller scales and larger spacing between clay packets or between clay folia and detrital grains at larger scales. Non-clay porosity may also be observed, including significant nanoporosity associated with organic matter (OM). Data obtained as a function of thermal maturity suggest that while the overall porosity does decrease with increasing maturity, the change is not linear with R o (percent vitrinite reflectance), but occurs primarily in the early stages of maturation. Pore size or volume distributions obtained from scattering experiments often differ considerably from those obtained from nitrogen or carbon dioxide absorption or mercury intrusion porosimetry, which may reflect the overall accessibility of various pore sizes to external fluids. Despite these results, however, a significant amount of work and a number of basic questions remain to be answered that can be addressed either uniquely by scattering methods or in a complementary fashion using these and other approaches.

Anovitz, Lawrence {Larry} M.↗

Size and structure of Chlorella zofingiensis /FeCl 3 flocs in a shear flow: Algae Floc Structure

Flocculation is a promising method to overcome the economic hurdle to separation of algae from its growth medium in large scale operations. But, understanding of the floc structure and the effects of shear on the floc structure are crucial to the large scale implementation of this technique. The floc structure is important because it determines, in large part, the density and settling behavior of the algae. Freshwater algae floc size distributions and fractal dimensions are presented as a function of applied shear rate in a Couette cell using ferric chloride as a flocculant. Comparisons are made with measurements made for a polystyrene microparticle model system taken here as well as reported literature results. The algae floc size distributions are found to be self-preserving with respect to shear rate, consistent with literature data for polystyrene. Moreover, three fractal dimensions are calculated which quantitatively characterize the complexity of the floc structure. Low shear rates result in large, relatively dense packed flocs which elongate and fracture as the shear rate is increased. Our results presented here provide crucial information for economically implementing flocculation as a large scale algae harvesting strategy.

59 BASIC BIOLOGICAL SCIENCES↗

Two-Phase Flow in Porous Media: Predicting Its Dependence on Capillary Number and Viscosity Ratio

Motivated by the need to determine the dependencies of two-phase flow in a wide range of applications from carbon dioxide sequestration to enhanced oil recovery, we have developed a standard two-dimensional, pore-level model of immiscible drainage, incorporating viscous and capillary effects. This model has been validated through comparison with several experiments. For a range of stable viscosity ratios (M=μ injected,nwf /μ defending,wf ≥ 1), we had increased the capillary number, N c and studied the way in which the flows deviate from fractal capillary fingering at a characteristic time and become compact for realistic capillary numbers. This crossover has enabled predictions for the dependence of the flow behavior upon capillary number and viscosity ratio. Our results for the crossover agreed with earlier theoretical predictions, including the universality of the leading power-law indicating its independence of details of the porous medium structure. In this article, we have observed a similar crossover from initial fractal viscous fingering (FVF) to compact flow, for large capillary numbers and unstable viscosity ratios M < 1. In this case, we increased the viscosity ratio from infinitesimal values, and studied the way in which the flows deviate from FVF at a characteristic time and become compact for non-zero viscosity ratios. This crossover has been studied using both our pore-level model and micro-fluidic flow-cell experiments. The same characteristic time, τ = 1/M 0.7 , satisfactorily describes both the pore-level results.

36 MATERIALS SCIENCE↗

Magnonic Floquet Hofstadter butterfly

We introduce the magnonic Floquet Hofstadter butterfly in the two-dimensional (2D) insulating honeycomb ferromagnet using a combination of spin wave theory and quantum field theory. We show that hopping magnetic dipole moment (i.e. magnon quasiparticles) in the 2D insulating honeycomb ferromagnet accumulates the Aharonov–Casher phase when irradiated by an oscillating space- and time-dependent electric field. We study two different cases. In the first case, we consider the effects of only space-dependent electric field. In this case, we realize the magnonic Hofstadter spectrum with similar fractal structure as graphene subject to a perpendicular magnetic field, but with no spin degeneracy due to broken time-reversal symmetry by the ferromagnetic order. In addition, the magnonic Dirac points and Landau levels occur at finite energy as expected in a bosonic system. Remarkably, this discrepancy does not affect the topological invariant of the system. Consequently, the magnonic Chern number assumes odd values and the magnon Hall conductance gets quantized by odd integers. In the second case, we study the effects of both space- and time-dependent electric field. In this case, the theoretical framework is studied by the Floquet formalism. We show that the magnonic Floquet Hofstadter spectrum emerges entirely from the oscillating space- and time-dependent electric field, which is in stark contrast to electronic Floquet Hofstadter spectrum, where irradiation by circularly polarized light and a perpendicular magnetic field are applied independently. We study the deformation of the fractal structure at different laser frequencies and amplitudes, and analyze the topological phase transitions associated with gap openings in the magnonic Floquet Hofstadter butterfly.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Analysis of Direct-injection spark-ignition (DISI) soot morphology

We have characterized particle emissions produced by a 4-cylinder, 2.0 L DISI engine using transmission electron microscopy (TEM) and image analysis. Analyses of soot morphology provide insight to particle formation mechanisms and strategies for prevention. Particle emissions generated by two fueling strategies were investigated, early injection and injection modified for low particle number concentration emissions. A blend of 20% ethanol and 80% emissions certification gasoline was used for the study given the likelihood of increased ethanol content in widely available fuel. In total, about 200 particles and 3000 primary soot spherules were individually measured. For the fuel injection strategy which produced low particle number concentration emissions, we found a prevalence of single solid sub-25 nm particles and fractal-like aggregates. The modal diameter of single solid particles and aggregate primary particles was between 10 and 15 nm. Solid particles as small as 6 nm were present. Although nanoparticle aggregates had fractal-like morphology similar to diesel soot, the average primary particle diameter per aggregate had a much wider range that spanned from 7 to 60 nm. For the early fuel injection strategy, liquid droplets were prevalent, and the modal average primary particle diameter was between 20 and 25 nm. The presence of liquid droplets may have been the result of unburned fuel and/or lubricating oil originating from fuel impingement on the piston or cylinder wall; the larger modal aggregate primary particle diameter suggests greater fuel-rich zones in-cylinder than for the low particle number concentration point. However, both conditions produced aggregates with a wide range of primary particle diameters, which indicates heterogeneous fuel and air mixing.

02 PETROLEUM↗

Preface to the Special Issue on TOUGH Symposium 2015

The TOUGH Symposium 2015 was held in Berkeley, California, September 28-30, 2015. The TOUGH family of codes, developed at the Energy Geosciences Division of Lawrence Berkeley National Laboratory (LBNL), is a suite of computer programs for the simulation of multiphase and multicomponent fluid and heat flows in porous and fractured media with applications in many geosciences fields, such as geothermal reservoir engineering, nuclear waste disposal, geological carbon sequestration, oil and gas reservoirs, gas hydrate research, vadose zone hydrology and environmental remediation. Since the first release in the 1980s, many modifications and enhancements have been continuously made to TOUGH and its various descendants (iTOUGH2, TOUGH+, TOUGH-MP, TOUGHREACT, TOUGH+HYDRATE, TMVOC...), at LBNL and elsewhere. Today, these codes are used worldwide in academia, government organizations and private companies in problems involving coupled hydrological, thermal, biogeochemical and geomechanical processes. The Symposia, organized every 2-3 years, bring together developers and users for an open exchange on recent code enhancements and applications. In 2015, the Symposium was attended by one hundred participants, representing thirty-four nationalities. This Special Issue in Computers & Geosciences gathers extended versions of selected Symposium proceedings related to (i) recent enhancements to the TOUGH family of codes and (ii) coupled flow and geomechanics processes modeling. In this special issue, a paper by Jung et al. provides a new base version of TOUGH, TOUGH3. This latest version addresses the computational robustness and efficiency needed for the increasing complexity of the simulated processes and the growing size of model domains. Moreover, it consolidates the serial and parallel versions into a single code, hence, inconsistencies between different versions are less likely to occur, and code maintenance and development become more efficient. Finsterle et al. present a review of the capabilities of iTOUGH2 and illustrate the workflow of an integrated simulation-optimization framework. Liu et al. present an approach to reduce the computational cost of performing Bayesian inverse modeling and demonstrate their approach using a synthetic experiment simulated with TOUGH2. Regarding the mesh generation process, the paper by Doughty presents a generalization of the grid-generation algorithm embedded in TOUGH2 (MESHMAKER) to create one-column grids with fractal dimension, useful for representing flow through fractures or highly heterogeneous media with fractal geometry, and also for inverse methods. Sentís and Gable present a module to interface the open source code Lagrit with TOUGH2, that assists in the processes of mesh generation and model setup, and that can be particularly useful for complex geometries and large models. Bonduà et al. present a pre-processing tool (VORO2MESH) that features a full 3D Voronoi approach for structured and unstructured grids, and an enhanced post-processor (TOUGH2Viewer) for the visualization of 3D Voronoi grids. The literature review shows that coupled fluid flow and geomechanics has gained increasing attention in the last years in many geosciences fields. In this context, several codes of the TOUGH family have been successfully coupled with geomechanics software. The paper by Rutqvist presents a review of some of these TOUGH-based geomechanics models, of which the TOUGH-FLAC simulator – presented for the first time in the TOUGH Symposium 2003 – is well-known worldwide and has been used in a large variety of applications, encompassing the application domains of the TOUGH codes. Blanco-Martín et al. present an extension of TOUGH-FLAC to the finite strain framework, motivated by the existence of large strains associated with rock salt deformation in the context of heat-generating nuclear waste disposal. Following a paper published in the Special Issue of the TOUGH Symposium 2012 in this journal, Kim et al. present the current status of the TOUGH-RSBN simulator for coupled hydro-mechanical modeling of hydraulic fracturing using a discrete fracture network approach, and present some validation and demonstration cases. Rinaldi and Nespoli present TOUGH-SEED, an injection-induced seismicity modeling approach using TOUGH2 and a geomechanics stochastic model, and apply it to the Basel EGS project. Finally, Rinaldi et al. use the PEST protocol implemented in iTOUGH2, combined with TOUGH-FLAC as the forward model, to perform inverse modeling for the In Salah CO2 demonstration site in Algeria. Using pore pressures and InSAR displacements as observations, this approach allows for a multi-physics joint inversion and takes advantage of the inverse capabilities of iTOUGH2 (parameter estimation, sensitivity analysis, uncertainty estimation …), applied to coupled fluid flow and geomechanics. On behalf of the members of the TOUGH Symposium 2015 Organizing Committee, I hope that this collection of papers will provide the readers of Computers & Geosciences with a recent view of the capabilities of the TOUGH family of codes, as well as with current modeling research domains in the geosciences. Last but not least, I would like to express my gratitude to all the reviewers who kindly contributed to this Special Issue, as well as the Journal staff who have made this publication possible.

99 GENERAL AND MISCELLANEOUS↗