Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fluid equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

A crisis for the verification and validation of turbulence simulations

Three algorithms have been proposed for solution of the Rayleigh–Taylor turbulent mixing problem. They are based upon three different physical principles governing the Euler equations for fluid flow. The principles serve to select the physically relevant solution from among many nonunique solutions. The admissibility principle is in dispute. The three different algorithms, expressing the three physical admissibility principles can be formulated in terms of the three energy dissipation rates or the entropy production rates, as selected by the size of the sub grid scale coefficients. These have maximal values or less than maximal values. The resulting solutions are markedly different. We find strong validation evidence that supports the maximum rate principle, based on a review of prior results and on new results presented here. We review experimental data used for validation and sufficient to discriminate among the three. We present a new analysis of this data. We show that the hypothesized long wave length perturbations in the initial conditions are not significant, so that validation can be based on this data in a straight forward manner. One of the algorithms is labeled direct numerical simulation, but is not, and as a consequence, the two algorithms with less than maximal SGS coefficients are variants of one another. Finally recommendations for the numerical modeling of the deflagration to detonation transition in type Ia supernova are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Fluid and gyrokinetic turbulence in open field-line, helical plasmas

Two-fluid Braginskii codes have simulated open-field line turbulence for over a decade, and only recently, it has become possible to study these systems with continuum gyrokinetic codes. This work presents a first-of-its-kind comparison between fluid and (long-wavelength) gyrokinetic models in open field-lines, using the GDB and Gkeyll codes to simulate interchange turbulence in the Helimak device at the University of Texas [T. N. Bernard et al., Phys. Plasmas 26, 042301 (2019)]. Partial agreement is attained in a number of diagnostic channels when the GDB sources and sheath boundary conditions (BCs) are selected carefully, especially the heat-flux BCs that can drastically alter the temperature. The radial profile of the fluctuation levels is qualitatively similar and quantitatively comparable on the low-field side, although statistics such as moments of the probability density function and the high-frequency spectrum show greater differences. This comparison indicates areas for future improvement in both simulations, such as sheath BCs, and improvements in GDB like particle conservation and spatially varying thermal conductivity, in order to achieve better fluid-gyrokinetic agreement and increase fidelity when simulating experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of the magnetothermal instability in coronal plasma flows

The theory of the magnetothermal instability (MTI) is revisited through the lens of the stability of uniform systems. The linear stability analysis includes flow advection and Nernst transport. The instability criteria derived distinguish between the convective and the absolute nature of the perturbation growth. It is proven that, in the region where the Nernst and plasma blowoff velocities cancel, the MTI can be absolute and wave-packet perturbations grow in situ. This instability is mediated by the internal feedback between the Biermann battery and Righi–Leduc terms. Here, the analysis is extended to derive the dispersion relation for short-wavelength perturbations developing in nonuniform profiles with the application to coronal plasmas. It is found that the condition for MTI requires the net B-field convection velocity to be small at the isothermal sonic section, and the plasma conditions in this section govern the dynamics of the instability. Analysis of hydro-equivalent implosions suggests that unstable perturbations undergo more e-foldings of growth in larger-size targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock equation of state experiments in MgO up to 1.5 TPa and the effects of optical depth on temperature determination

Laser-driven shock compression enables an experimental study of phase transitions at unprecedented pressures and temperatures. One example is the shock Hugoniot of magnesium oxide (MgO), which crosses the B1–B2-liquid triple point at 400–600 GPa, 10 000–13 000 K (0.86–1.12 eV). MgO is a major component within the mantles of terrestrial planets and has long been a focus of high-pressure research. Here, we combine time-resolved velocimetry and pyrometry measurements with a decaying shock platform to obtain pressure–temperature data on MgO from 300 to 1500 GPa and 9000 to 50 000 K. Pressure–temperature–density Hugoniot data are reported at 1500 GPa. These data represent the near-instantaneous response of an MgO [100] single crystal to shock compression. We report on a prominent temperature anomaly between 400 and 460 GPa, in general agreement with previous shock studies, and draw comparison with equation-of-state models. We provide a detailed analysis of the decaying shock compression platform, including a treatment of a pressure-dependent optical depth near the shock front. We show that if the optical depth of the shocked material is larger than 1 μm, treating the shock front as an optically thick gray body will lead to a noticeable overestimation of the shock temperature.

36 MATERIALS SCIENCE↗

Shock Hugoniot calculations using on-the-fly machine learned force fields with ab initio accuracy

We present a framework for computing the shock Hugoniot using on-the-fly machine learned force field (MLFF) molecular dynamics simulations. In particular, we employ an MLFF model based on the kernel method and Bayesian linear regression to compute the free energy, atomic forces, and pressure, in conjunction with a linear regression model between the internal and free energies to compute the internal energy, with all training data generated from Kohn–Sham density functional theory (DFT). We verify the accuracy of the formalism by comparing the Hugoniot for carbon with recent Kohn–Sham DFT results in the literature. In so doing, we demonstrate that Kohn–Sham calculations for the Hugoniot can be accelerated by up to two orders of magnitude, while retaining ab initio accuracy. We apply this framework to calculate the Hugoniots of 14 materials in the FPEOS database, comprising 9 single elements and 5 compounds, between temperatures of 10 kK and 2 MK. We find good agreement with first principles results in the literature while providing tighter error bars. In addition, we confirm that the inter-element interaction in compounds decreases with temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Semi-analytic solutions to the Noh problem with a black box EoS

The objective of this paper is to derive a method of constructing semi-analytic solutions to the Noh problem when the equation of state is a black box. Such solutions can be used for verification tests of hydrodynamics codes. We present the underlying theory, the method for finding solutions, and several examples of derived semi-analytic solutions. We end by performing a classic verification convergence test comparing numerical results from a hydrodynamics code against a non-trivial semi-analytic solution.

97 MATHEMATICS AND COMPUTING↗

Calculating shock Hugoniot and isentropes using multiphase equation of state tables and application to shock and release of diamond ablators in inertial confinement fusion implosions

Advances in shock and ramp compression techniques now allow experimental access to unprecedented extreme conditions of pressure and temperature, providing a means to test theoretical models. Here, we describe a simple methodology to compute multi-phase shock Hugoniot and isentropes using multiphase equation of state tables. We treat explicitly the phase coexistence along the phase boundary to reveal the evolution of the sample as it undergoes the phase transformation in adiabatic conditions. We illustrate the method by calculating the predicted shock and shock-and-release behavior of diamond at conditions relevant for the initial stage of inertial confinement fusion implosions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of plasma transport in MPS-LD linear plasma device by using BOUT++

Here a linear plasma device (LPD) module based on the 2D transport module under the BOUT++ framework is developed in this paper to simulate plasma transport in the LPD. The LPD module includes three parts, i.e. magnetic field calculation, simulation mesh generation and plasma transport setup. The magnetic field is calculated with the circular current loop using the location and current information of each coil. The mesh generation code can produce a simulation mesh for LPD by employing the magnetic field. The plasma transport model is based on the reduced Braginskii equations, which consist of the continuity equation, momentum equation, and energy equation. The fluid neutral model is applied for neutral particle simulation. Deuterium (D) and helium (He) ions and atoms can be simulated by the model. The first attempt to simulate plasma transport in the new LPD, called multiple plasma simulation linear plasma device (MPS-LD), is presented using the developed model. The D plasma transport in the MPS-LD is simulated and benchmarked against the two-point model, showing the validation of the BOUT++ simulation. The effects of radial transport on the heat load to the target are studied, which illustrates the significant impact of the radial diffusivities $D_⟂$ and $\mathcal{X}_{⟂i,e}$ on the plasma. Moreover, the He impurity injection process during the discharge is studied with emphasis on plasma–impurity interactions. The simulation results show that He injection can reduce the plasma energy load to the target significantly, and the efficiency depends on the He source density and injection velocity. The present work provides an alternative and flexible simulation tool for plasma transport in LPDs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatiotemporal predictions of toxic urban plumes using deep learning

Industrial accidents, chemical spills, and structural fires can release large amounts of harmful materials that disperse into urban atmospheres and impact populated areas. Computer models are typically used to predict the transport of toxic plumes by solving fluid dynamical equations. However, these models can be computationally expensive due to the need for many grid cells to simulate turbulent flow and resolve individual buildings and streets. In emergency response situations, alternative methods are needed that can run quickly and adequately capture important spatiotemporal features. Here, we present a novel deep learning model called ST-GasNet inspired by the mathematical equations that govern the behavior of plumes as they disperse through the atmosphere. ST-GasNet learns the spatiotemporal dependencies from a limited set of temporal sequences of ground-level toxic urban plumes generated by a high-resolution large eddy simulation model. On independent sequences, ST-GasNet accurately predicts the late-time spatiotemporal evolution, given the early-time behavior as an input, even when a building splits a large plume into smaller plumes. By incorporating large-scale wind boundary condition information, ST-GasNet achieves a prediction accuracy of at least 90% on test data for the entire prediction period.

Civil and Environmental Engineering↗

Exact general solutions for cosmological scalar field evolution in a background-dominated expansion

We derive exact general solutions (as opposed to attractor particular solutions) and corresponding first integrals for the evolution of a scalar field $\phi$ in a universe dominated by a background fluid with equation of state parameter wB. In addition to the previously examined linear [V($\phi$)=V 0 $\phi$] and quadratic [V($\phi$)=V 0 $\phi$ 2 ] potentials, we show that exact solutions exist for the power-law potential V($\phi$)=V 0 $\phi$ n with n=4(1+w B )/(1-w B )+2 and n=2(1+w B )/(1-w B ). These correspond to the potentials V($\phi$)=V 0 $\phi$ 6 and V($\phi$)=V 0 $\phi$ 2 for matter domination and V($\phi$)=V 0 $\phi$ 10 and V($\phi$)=V 0 $\phi$ 4 for radiation domination. The $\phi$ 6 and $\phi$ 10 potentials can yield either oscillatory or nonoscillatory evolution, and we use the first integrals to determine how the initial conditions map onto each form of evolution. The exponential potential yields an exact solution for a stiff/kination (w B =1) background. We use this exact solution to derive an analytic expression for the evolution of the equation of state parameter, $w_\phi$, for this case.

79 ASTRONOMY AND ASTROPHYSICS↗

Primordial gravitational waves from black hole evaporation in standard and nonstandard cosmologies

Gravitons radiated from light, evaporating black holes contribute to the stochastic background of gravitational waves. The spectrum of such emission depends on both the mass and the spin of the black holes, as well as on the redshifting that occurs between the black hole formation and today. This, in turn, depends on the expansion history of the Universe, which is largely unknown and unconstrained at times prior to the synthesis of light elements. Here, we explore the features of the stochastic background of gravitational waves from black hole evaporation under a broad range of possible early cosmological histories. The resulting gravitational wave signals typically peak at very high frequencies, and offer opportunities for proposed ultrahigh-frequency gravitational wave detectors. Lower-frequency peaks are also possible, albeit with a suppressed intensity that is likely well below the threshold of detectability. We find that the largest intensity peaks correspond to cosmologies dominated by fluids with equations of state that have large pressure-to-density ratios. Such scenarios can be constrained on the basis of violation of Δ⁢N eff bounds.

79 ASTRONOMY AND ASTROPHYSICS↗

Harmony code

Harmony is a finite element ALE code for solving the equations of fluid dynamics for single-material flows with arbitrary mesh motion in three dimensional geometry.

Chiravalle, Vincent↗

Simulation of ENSO Teleconnections to Precipitation Extremes over the United States in the High-Resolution Version of E3SM

Abstract We evaluate the simulated teleconnection of El Niño–Southern Oscillation (ENSO) to winter season precipitation extremes over the United States in a long (98 years) 1950 control high-resolution version (HR; 25-km nominal atmosphere model horizontal resolution) of the U.S. Department of Energy’s (DOE) Energy Exascale Earth System Model version 1 (E3SMv1). The model bias and spatial pattern of ENSO teleconnections to mean and extreme precipitation in HR overall are similar to the low-resolution model’s (LR; 110 km) historical simulation (four-member ensemble, 1925–59). However, over the southeastern United States (SE-U.S.), HR produces stronger El Niño–associated extremes, reducing LR’s model bias. Both LR and HR produce weaker than observed increase in storm track activity during El Niño events there, but HR improves the ENSO-associated variability of moisture transport over SE-U.S. During El Niño, stronger vertical velocities in HR produce stronger large-scale precipitation, causing larger latent heating of the troposphere that pulls in more moisture from the Gulf of Mexico into the SE-U.S. This positive feedback also contributes to the stronger mean and extreme precipitation response in HR. Over the Pacific Northwest, LR’s bias of stronger than observed La Niña associated extremes is amplified in HR. Both models simulate stronger than observed moisture transport from the Pacific Ocean into the region during La Niña years. The amplified HR bias there is due to stronger orographically driven vertical updrafts that create stronger large-scale precipitation, despite weaker La Niña–induced storm track activity. Significance Statement New high-resolution Earth system models (ESMs) solve mathematical equations of fluid flow at much smaller spatial scales than prevalent ESMs, and thus are prohibitively expensive to compute. However, they can be useful for simulating accurate details of regional climate extremes that are driven by naturally occurring climate oscillations like El Niño–Southern Oscillation (ENSO). Here, we evaluate the simulation of ENSO-driven precipitation extremes over the United States in the high-resolution version of the U.S. Department of Energy’s new Energy Exascale Earth System Model version 1. We find that the high-resolution model improves upon its low-resolution counterpart over the southeastern United States by producing a better transport of moisture into the region from the Gulf of Mexico during El Niño. Over the U.S. Pacific Northwest, the high-resolution model simulates the atmospheric flow in more detail over the complex mountainous terrain. However, it also brings in more moisture from the Pacific Ocean just like the low-resolution model. This causes it to produce precipitation extremes during La Niña years there that are stronger than that observed in the real world.

54 ENVIRONMENTAL SCIENCES↗

Preliminary Implementation of Two-Dimensional Cartesian Solver in CTF-R

Sub-channel codes are one of the the modeling and simulation tools used for thermal-hydraulic analysis of nuclear reactors. A few examples of such sub-channel codes are the COolant Boiling in Rod Arrays (COBRA) family of codes. The approximations that are used to simplify the fluid conservation equations into sub-channel form, mainly that of axially-dominated flow, lead to noticeable limitations on sub-channels solvers for problems with significant flow in lateral directions. In this report, a two-dimensional Cartesian solver is developed and implemented within CTF-R, which is the residual solver in the North Carolina State University version of COBRA-TF (CTF). The new solver will enable CTF to simulate flow that is not axially-dominated. The appropriate Cartesian forms of the conservation equations are derived and implemented in the solver. Once the conservation equations are established, the process of constructing the matrix system was altered to solve a two-dimensional staggered grid system. A simple case was used to test that the two-dimensional Cartesian solver is accurate. The test problem does not include any source terms or flow in the lateral direction. The results show that the solver was able to run the simple case and converge to a steady-state solution. Future work will focus on testing existing capabilities by using test cases that include transients and equation cross-terms. Future work will also include adding additional capabilities such as enabling the solver to include cases with source terms and three dimensional cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Symmetry Determining Equations of the Rankine-Hugoniot Equations for Variable Velocity Shock Waves

The “constant velocity piston” problem (Fig. 1), also known as the “piston problem,” is a standard model for a one dimensional, in our case linear, symmetric shock wave moving through an inviscid, perfect gas. The model can be divided into two regions - a perturbed section on the left and an unperturbed section on the right - by a moving shock wave moving left to right. Both the perturbed and unperturbed sections, i.e. the shocked and unshocked regions, respectively, obey the Eulerian conservation equations; however, at the exact location of the shock, there is a mathematical discontinuity not satisfied by the Euler equations. To ensure continuity and conservation of certain quantities when crossing between the unshocked and shocked regions, we evoke a series of equations derived from the Eulerian conservation equations, called the Rankine-Hugoniot equations, or “jump” equations as it is often referred to in the literature on the topic. The classical constant-velocity piston problem assumes the piston features a constant driving velocity (among many other willing suspensions of belief required in the pursuit of a first principles equation model); consequent to this assumption is a constant-velocity shock and a constant-velocity shocked flow state. However, using Lie Group Theory (LGT), also known as symmetry analysis, we can attempt to reinterpret the model with a shock wave of variable velocity in time and space. An extension of the model in this way opens up the possibility for obtaining new analytical solutions to the piston problem for certain shock velocity models. In this report, we use LGT to derive the symmetry determining equations (SDEs), whose solutions are Lie groups, which permit analytical solutions. In the future, we can then use the SDEs to define constraint equations on the shock velocity model and what the successive solutions to the Euler equations might be based off such constraints. This report is structured as follows: Section 2 provides a brief derivation of the Rankine-Hugoniot (“jump”) equations; Section 3 gives an overview of Lie group theory; Section 4 derives the SDEs of the jump equations; Section 5 derives the Euler conservation equations for fluids; and Section 6 presents concluding remarks and opportunities for future studies.

42 ENGINEERING↗

Generation and Life Cycle of Solar Spicules

The physical mechanism for the creation of solar spicules is proposed with three stages of their life cycle. It is assumed that at stage I the density hump is formed locally in the x-y plane in the lower chromosphere in the presence of temperature gradients of electrons and ions along the z-axis (the vertical direction). In this region, the density structure of quasi-neutral (n i ≃ n e = n) plasma after taking birth is accelerated in the vertical direction owing to the thermal force F th ∝ ∇n(x, y, t) × (∇T e + ∇T i ). The exact time-dependent analytical solution of two-fluid plasma equations is presented assuming that density is maximum at the center of the density structure and decays away from it gradually. The 2D density structure is created as a step function H(t) in time at the bottom of the chromosphere, and consequently, the vertical plasma velocity turns out to be the ramp function of time R(t) = tH(t), whereas the source term S(x, y, t) for the density follows the delta function δ(t) form. The upward acceleration a = a(x, y) $\hat{z}$ produced in this density structure is greater than the downward constant solar acceleration −g ⊙ in the chromosphere. In the transition region, the temperature gradients are steeper; therefore, the upward acceleration increases in magnitude g ⊙ ≪ a and the density hump spends less time there. This is stage II of its life cycle. In stage III, the density structure enters into the corona, where the gradients of temperatures vanish and the structure decelerates to zero velocity under the action of the solar gravitational force.

79 ASTRONOMY AND ASTROPHYSICS↗