Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Microscopic potential fluctuations in Si-doped AlGaN epitaxial layers with various AlN molar fractions and Si concentrations

Nanoscopic potential fluctuations of Si-doped AlGaN epitaxial layers with the AlN molar fraction varying from 0.42 to 0.95 and Si-doped Al{sub 0.61}Ga{sub 0.39}N epitaxial layers with Si concentrations of 3.0–37 × 10{sup 17 }cm{sup −3} were investigated by cathodoluminescence (CL) imaging combined with scanning electron microscopy. The spot CL linewidths of AlGaN epitaxial layers broadened as the AlN molar fraction was increased to 0.7, and then narrowed at higher AlN molar fractions. The experimental linewidths were compared with the theoretical prediction from the alloy broadening model. The trends displayed by our spot CL linewidths were consistent with calculated results at AlN molar fractions of less than about 0.60, but the spot CL linewidths were markedly broader than the calculated linewidths at higher AlN molar fractions. The dependence of the difference between the spot CL linewidth and calculated line broadening on AlN molar fraction was found to be similar to the dependence of reported S values, indicating that the vacancy clusters acted as the origin of additional line broadening at high AlN molar fractions. The spot CL linewidths of Al{sub 0.61}Ga{sub 0.39}N epitaxial layers with the same Al concentration and different Si concentrations were nearly constant in the entire Si concentration range tested. From the comparison of reported S values, the increase of V{sub Al} did not contribute to the linewidth broadening, unlike the case of the V{sub Al} clusters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

EVOLUTION IN THE DUST LANE FRACTION OF EDGE-ON L*{sub V} SPIRAL GALAXIES SINCE z = 0.8

The presence of a well-defined and narrow dust lane in an edge-on spiral galaxy is the observational signature of a thin and dense molecular disk, in which gravitational collapse has overcome turbulence. Using a sample of galaxies out to z {approx} 1 extracted from the COSMOS survey, we identify the fraction of massive (L*{sub V}) disks that display a dust lane. Our goal is to explore the evolution in the stability of the molecular interstellar medium (ISM) disks in spiral galaxies over a cosmic timescale. We check the reliability of our morphological classifications against changes in rest-frame wavelength, resolution, and cosmic dimming with (artificially redshifted) images of local galaxies from the Sloan Digital Sky Survey. We find that the fraction of L*{sub V} disks with dust lanes in COSMOS is consistent with the local fraction ( Almost-Equal-To 80%) out to z {approx} 0.7. At z = 0.8, the dust lane fraction is only slightly lower. A somewhat lower dust lane fraction in starbursting galaxies tentatively supports the notion that a high specific star formation rate can efficiently destroy or inhibit a dense molecular disk. A small subsample of higher redshift COSMOS galaxies display low internal reddening (E[B - V]), as well as a low incidence of dust lanes. These may be disks in which the growth of the dusty ISM disk lags behind that of the stellar disk. We note that at z = 0.8, the most massive galaxies display a lower dust lane fraction than lower mass galaxies. A small contribution of recent mergers or starbursts to this most massive population may be responsible. The fact that the fraction of galaxies with dust lanes in COSMOS is consistent with little or no evolution implies that models to explain the spectral energy distribution or the host galaxy dust extinction of supernovae based on local galaxies are still applicable to higher redshift spirals. It also suggests that dust lanes are long-lived phenomena or can be reformed over very short timescales.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of the volume fraction gradient on the phase interaction force model for disperse two-phase flows

In this work, the effects of the particle volume fraction gradient on fluid-particle interactions are studied. The phase interaction force is decomposed into three terms. For the first term, namely the symmetrized force density, we present theoretical reasoning and numerical evidence to assume that it is independent of the particle volume fraction gradient. The second term is the particle volume fraction gradient times a newly introduced diffusion stress. The third term is the divergence of the particle-fluid-particle (PFP) stress. If this assumption of independence of the particle volume fraction gradient for the first term can be verified, to the first order of the ratio of the mean distance between particles to the macroscopic lengthscale, all three terms can be studied and modeled in flows with uniform particle distributions. Models thus obtained are applicable to statistically inhomogeneous flows, with the second and third terms accounting for statistical inhomogeneity. To verify this assumption, numerical simulations of flows passing fixed arrays of particles are performed. Both uniform and nonuniform particle volume fractions are studied and compared for disperse multiphase flows with the particle Reynolds numbers ranging from 1 to 100, and particle volume fraction ranging from 1% to 26% in statistically steady states. It is found that the symmetrized force (first) term can be well approximated by the drag force obtained from studies of uniform flows. The diffusion stress is positive along the flow direction and negative in the directions perpendicular to the flow. In the case of moving particles, this stress could potentially cause particle aggregation in the flow direction and dispersion in the directions perpendicular to the flow. Finally, the diffusion stress is only important when there is a volume fraction gradient, while the PFP stress can be important in inhomogeneous flows with either nonuniform particle concentrations or nonuniform average relative velocities between the phases.

42 ENGINEERING↗

SU-D-19A-02: Electron and Photon Absorbed Fractions for Tumors of Varying Sizes and Compositions

Purpose: To calculate absorbed fractions for mono-energetic photons and electrons in tumors of varying compositions using Monte Carlo simulations in MCNPX. Although tumor dosimetry has been previously investigated, these studies are very limited as they only consider absorbed fractions for soft-tissue tumors. Methods: The tumors were modeled as spheres with radii ranging from 0.10 cm to 6.0 cm and with compositions varying from 100% soft tissue to 100% bone. The energies of both the photons and electrons were varied from 10 keV to 10 MeV and were homogenously distributed throughout the tumor volume. Furthermore, this investigation addresses the issue of spherical versus elliptical tumors. Both prolate and oblate spheroid tumors of different compositions were modeled, and absorbed fractions were calculated for various electron and photon energies. Results: The data clearly shows an absorbed fraction dependence on tumor composition. For example, a soft-tissue model for a 3 MeV electron emitted in a 1 cm diameter bone tumor would have an 83% error, and this same assumption for a 500 keV photon would yield a 74% error. Ultimately, empirical fits were created for each of the five material compositions in order to facilitate the absorbed fraction calculation, requiring only the tumor size and particle energy. Furthermore, the data shows that absorbed fractions for moderate spheroids can be well approximated by spherical tumors of equal mass to within 8%, but in the extreme cases where the spheroid resembles more of a disk, the errors can be as high as 30%. Conclusion: This comprehensive data set is most valuable for nuclear medicine dosimetry because it incorporates particle type, particle energy, tumor size, and tumor composition. Although mono-energetic particles were modeled, absorbed fractions and S-values may be calculated for any radionuclide via linear interpolation, as long as the particle energies or spectra are known.

60 APPLIED LIFE SCIENCES↗

SU-F-T-685: Evaluation of Tumor Hypoxic Fraction Using Serial Volumetric Imaging During Radiation Therapy

Purpose: To develop a tumor response model which could be uses to compute tumor hypoxic fraction using serial volumetric tumor imaging. This algorithm may be used for treatment response assessment and also for guidance of more expensive PET imaging of hypoxia. Methods: Previously developed two-level cell population tumor response model was modified to include a third cell level describing hypoxic and necrotic cells. This third level was considered constant value during radiotherapy treatment; therefore, inclusion additional parameter did not compromise stability of model fitting to imaging data. Fitting the model to serial volumetric imaging data was performed using a least squares objective function and simulated annealing algorithm. The problem of reconstruction of radiobiological parameters from serial imaging data was considered as inverse ill-posed problem described by the Fredholm integral equation of the first kind. Variational regularization was used to stabilize solutions. Results: To evaluate performance of the algorithm, we used a set of serial CT imaging data on tumor-volume for 14 head and neck cancer patients. The hypoxic fractions were reconstructed for each patient and the distribution of hypoxic fractions was compared to the distribution of initial hypoxic fractions previously measured using histograph. The measured and reconstructed from imaging data distributions of hypoxic fractions are in good agreement. The reconstructed distribution of cell surviving fraction was also in better agreement with in vitro data than previously obtained using the two-level cell population model. Conclusion: Our results indicate that it is possible to evaluate the initial hypoxic tumor fraction using serial volumetric imaging and a tumor response model. This algorithm can be used for treatment response assessment and guidance of more expensive PET imaging.

60 APPLIED LIFE SCIENCES↗

SU-G-JeP4-14: Assessment of Inter- and Intra-Fractional Motion for Extremity Soft Tissue Sarcoma Patients by Using In-House Real-Time Optical Image-Based Monitoring System

Purpose: This study aimed to assess inter- and intra-fractional motion for extremity Soft Tissue Sarcoma (STS) patients, by using in-house real-time optical image-based monitoring system (ROIMS) with infra-red (IR) external markers. Methods: Inter- and intra-fractional motions for five extremity (1 upper, 4 lower) STS patients received postoperative 3D conformal radiotherapy (3D-CRT) were measured by registering the image acquired by ROIMS with the planning CT image (REG-ROIMS). To compare with the X-ray image-based monitoring, pre- and post-treatment cone beam computed tomography (CBCT) scans were performed once per week and registered with planning CT image as well (REG-CBCT). If the CBCT scan is not feasible due to the large couch shift, AP and LR on-board imager (OBI) images were acquired. The comparison was done by calculating mutual information (MI) of those registered images. Results: The standard deviation (SD) of the inter-fractional motion was 2.6 mm LR, 2.8 mm SI, and 2.0 mm AP, and the SD of the intra-fractional motion was 1.4 mm, 2.1 mm, and 1.3 mm in each axis, respectively. The SD of rotational inter-fractional motion was 0.6° pitch, 0.9° yaw, and 0.8° roll and the SD of rotational intra-fractional motion was 0.4° pitch, 0.9° yaw, and 0.7° roll. The derived averaged MI values were 0.83, 0.92 for REG-CBCT without rotation and REG-ROIMS with rotation, respectively. Conclusion: The in-house real-time optical image-based monitoring system was implemented clinically and confirmed the feasibility to assess inter- and intra-fractional motion for extremity STS patients while the daily basis and real-time CBCT scan is not feasible in clinic.

60 APPLIED LIFE SCIENCES↗

Exploration of the volume fraction above which suspensions of spherical and weakly anisotropic colloid particles cannot flow

In article II of this series, we describe experiments with dense suspensions of spherical and dumbbell shaped colloid particles (particle diameter ~1.2 μm). The suspensions are sheared with dynamic and continuous stress. Dynamic stress sweeps are used to characterize a dynamic glass transition volume fraction (φ g ) and a dynamic yield stress (t y *). Both phenomena are understood in terms of activated nave mode coupling theory. The dynamic yield stress increases with volume fraction and scales with a reduced volume fraction φ* as t y * ~ φ * 4 . Under continuous stress, suspensions discontinuously shear thicken at a critical stress (t t *), which is independent of particle shape and particle interaction. The volume fraction at the onset of thickening (φ t ) is higher for dumbbell particles compared to spheres. Furthermore, our results suggest that there is a volume fraction where t y = t t , and this volume fraction occurs close to that of random close packing. For larger volume fractions, steady flow is only established through dilation.

42 ENGINEERING↗

A Bimodal Diagnostic Cloud Fraction Parameterization. Part II: Evaluation and Resolution Sensitivity

A wide range of approaches exists to account for subgrid cloud variability in regional simulations of the atmosphere. This paper addresses the following questions: 1) Is there still benefit in representing subgrid variability of cloud in convection-permitting simulations? 2) What is the sensitivity to the cloud fraction parameterization complexity? 3) Are current cloud fraction parameterizations scale-aware across convection-permitting resolutions? These questions are addressed for regional simulations of a 6-week observation campaign in the U.S. southern Great Plains. Particular attention is given to a new diagnostic cloud fraction scheme with a bimodal subgrid saturation-departure PDF, described in Part I. The model evaluation is performed using ground-based remote sensing synergies, satellite-based retrievals, and surface observations. It is shown that not using a cloud fraction parameterization results in underestimated cloud frequency and water content, even for stratocumulus. The use of a cloud fraction parameterization does not guarantee improved cloud property simulations, however. Diagnostic and prognostic cloud schemes with a symmetric subgrid saturation-departure PDF underestimate cloud fraction and cloud optical thickness, and hence overestimate surface shortwave radiation. These schemes require empirical bias-correction techniques to improve the cloud cover. The new cloud fraction parameterization, introduced in Part I, improves cloud cover, liquid water content, cloud-base height, optical thickness, and surface radiation compared to schemes reliant on a symmetric PDF. Furthermore, cloud parameterizations using turbulence-based, rather than prescribed constant subgrid variances, are shown to be more scale-aware across convection-permitting resolutions.

54 ENVIRONMENTAL SCIENCES↗

Simulation of Mechanical Fractionation of Chopped Whole-Plant Corn (WPC) Using Discrete Element Method (DEM)

Fractionating whole-plant corn (WPC) in a single-pass harvesting system requires studies on the WPC-to-equipment interaction for improved property control, as well as mechanical and air-driven separation processes compared to the traditional multi-pass grain and stover harvesting system. The discrete element method (DEM) technique has the potential to simulate WPC mechanical fractionation and support simulation-based design of WPC separation processes. In this study, methods to develop DEM particle models of WPC (kernel, cob, stalk, and husk) and their material properties for simulating mass fractionation using the ASABE standard mechanical shaker were proposed. Measurement was done on the axial dimensions (major, intermediate, and minor) and mass of each WPC type (mean sample size is 56), sampled from single-pass harvesting. Applying gaussian multivariate regression and bootstrapping re-sampling techniques, a DEM particle approximate to each WPC was developed. Sensitivity analysis of the DEM Young‘s modulus, Poisson‘s ratio, and interaction parameters of coefficient of restitution, coefficient of rolling friction, and coefficient of static friction on mass fraction was performed after 156 ASABE sieve-shaking DEM simulation runs, generated using Latin Hypercube Design (LHD) design of experiment (DOE) from 19 DEM material parameters. DEM simulation using Hertz-Mindlin with flexible bond contact laws and DOE optimized material properties successfully reproduced the mass fractions retained in ASABE sieves at 9.8% mean relative error and a coefficient of determination of R2 = 0.87. Here, the DEM methodology developed for mechanical WPC mass fractionation could be deployed to perform virtual design of feedstock handling equipment and performance analysis of mechanical fraction systems.

09 BIOMASS FUELS↗

Soil and soil fraction radiocarbon, C and N from the Enriched Background Isotope Study, Oak Ridge National Laboratory, Tennessee, USA

A large accidental 14CO2 release at the Oak Ridge Reservation in Tennessee, USA provided a strong label pulse into adjacent, well-studied oak forests, resulting in highly elevated Δ14C values in leaf litter (~1000‰) and roots (~260–450‰). A four-year manipulative study was conducted to provide insight into mechanisms underlying soil Organic matter dynamics, specifically to determine the relative contribution of litter versus roots to the bulk mineral soil C pool, as well as to free light, occluded light and heavy fractions. The heavy fraction was further split into fractions with densities of 1.7–2.4 g cm-3 and >2.4 g cm-3 to test the homogeneity of the mineral-associated fraction of C. Substantial concentrations of label were detected in all soil fractions within a year of the 14CO2 release, indicating rapid incorporation of newly fixed photosynthates in all fractions of soil organic C, regardless of differences in stability inferred by previous work. This rapid incorporation of label occurred only in treatments where roots were labeled, indicating that roots are the major source of inputs to mineral soil C stocks at these sites. Separation of the heavy fraction into subfractions of intermediate (1.7–2.4 g cm -3) and high (>2.4 g cm-3) density indicated that both subfractions incorporated label at similar rates, despite significant differences in degree of microbial processing.

54 ENVIRONMENTAL SCIENCES↗

Reference Gastrointestinal Absorption Fractions for Radionuclides Ingested in Soil

Oak Ridge National Laboratory is conducting a project for the Environmental Protection Agency (EPA) Office of Superfund Remediation and Technology Innovation involving derivation of cancer risk coefficients for ingestion of radionuclides in soil. EPA provides guidance on quantifying gastrointestinal (GI) absorption of a chemical in a given medium for use in risk evaluations including assessments for Superfund sites. Essentially, a medium-specific GI absorption fraction may be applied if and only if there is sound information to support that value. Otherwise, the applied GI absorption fraction should be the best estimate of fractional absorption of the chemical when ingested in highly soluble form. Based on our review of the literature on GI absorption of elements in soil, we have concluded that for many elements there is convincing evidence of substantially reduced absorption in ingested soil compared with ingestion in readily dissolved form. This report summarizes the reviewed information and proposes a comprehensive set of GI absorption fractions for ingestion of elements in soil. For most elements, the proposed GI absorption fractions are lower than the default absorption fractions recommended by the International Commission on Radiological Protection for radionuclides ingested in highly soluble form, even though considerable conservatism has been incorporated into the proposed soil-specific GI absorption fractions.

59 BASIC BIOLOGICAL SCIENCES↗

Rare Earth Element (REE) and Critical Mineral Fractions of Central Appalachian Coal-Related Strata Determined by 7-Step Sequential Extraction

Rare earth elements (REEs) and critical minerals (CMs) are used in many modern industries, including the automotive sector, generation and storage, clean energy, and defense. The demand for REEs is increasing, and the REE supply chain is unpredictable. The US has driven to assess non-conventional sources of REE (such as coal underclay) to identify domestic resources to stabilize this uncertainty in supply. Knowledge of the minerology, distribution, and modes of occurrence of REEs is integral to the assessment of non-conventional sources. Additionally, extraction techniques can be optimized and targeted when REE distribution in different solid fractions from source material is understood. In this study, four bituminous coal-related samples associated with the Lower and Middle Kittanning coal seams in the Appalachian Basin (US) underwent a seven-step sequential extraction procedure, primarily targeting the water-soluble, exchangeable, acid soluble, mildly reducible, moderately reducible, strongly reducible, and oxidizable fractions. The REE and other elements of interest from each extraction step were analyzed, and the percentages of element extracted from raw solids were calculated. REEs extracted from the total seven steps were reported as the extractable fraction, whereas the fractions in the residual solids were reported as the non-extractable fraction. Less than 6% of REE were extracted from three samples. Twenty-one percent of REE was extracted from the fourth sample, mainly from the steps targeting oxidizable and exchangeable phases. Co-extraction of critical metals (Co, Ni, Cu, and Zn) occurred during the oxidizable, exchangeable, acid soluble, and water-soluble steps for the four samples. In the extracted fractions, the four samples all exhibited a middle and heavy REE enrichment relative to light REE. The mobility of major cation (e.g., Ca, Fe, and P) and REE is associated with exchangeable, oxidizable, and acid soluble fractions. Non-extractable REE is likely held in refractory apatitic phases, and/or primary REE-phosphates (e.g., monazite and xenotime).

58 GEOSCIENCES↗

The Fraction of Active Galactic Nuclei in the USS 1558–003 Protocluster at $z$ = 2.53

The incidence of active galactic nuclei (AGNs) within the local environment is a potentially valuable probe of the mechanisms that trigger and provide fuel for accretion onto supermassive black holes. While the correlation between AGN fraction and environment has been well-studied in the local universe, AGN fractions have been measured for relatively few dense environments at high redshift. In this paper, we present a measurement of the X-ray AGN fraction in the USS 1558–003 protocluster associated with the $z$ = 2.53 radio galaxy 4C-00.62. Our measurement is based on a 100-ks Chandra observation, follow-up spectroscopy from the Multi-Object Double Spectrograph on the Large Binocular Telescope, and broad and narrowband photometry. These data are sensitive to AGNs more luminous than $L_X$ > 2 × 10 43 erg s -1 in the rest-frame hard X-ray band (2–10 keV). We have identified two X-ray AGNs at the redshift of USS 1558–003, one of which is the radio galaxy. We have determined that ${2.0}_{-1.3}^{+2.6} \% $ of the $Hα$ emitters in the protocluster are X-ray AGNs. Unlike most other high-redshift cluster progenitors studied with similar techniques, USS 1558–003 does not have a significantly higher fraction of AGNs than field galaxies at similar redshifts. This lower AGN fraction is inconsistent with the expectation that the higher gas fractions at high redshift, combined with the high galaxy densities and modest relative velocities in protoclusters, should produce higher AGN fractions.

79 ASTRONOMY AND ASTROPHYSICS↗

Radial Profiles of the Binary Fraction in Elliptical Galaxies

The radial profile of the binary fraction may vary with environment and is of significant importance for studying the formation mechanisms of binary stars and their dynamical evolution within globular clusters and galaxies. However, existing studies remain limited to the Milky Way and its neighboring galaxies. Leveraging the method proposed by Zhang et al. for estimating the variation in the binary fraction from integrated spectral features, we analyze a sample of 513 elliptical galaxies drawn from the Mapping Nearby Galaxies at Apache Point Observatory survey to measure their radial binary fraction profiles. Our results show that after accounting for the effect induced by radial variations in the stellar population (SP), the median SP-subtracted binary fraction, $r^{\textrm{med}}_{\textrm{b,sub}}$, becomes approximately flat. For nearly all elliptical galaxies in our sample, the variation in the binary fraction relative to the galaxy center at 1R e is less than 5%. No clear correlation is found between the ​​​​​gradient of the binary fraction and the gradients of the SP properties. Moreover, we also compare differences between ultraviolet (UV) upturn and non-UV upturn galaxies. The overall binary fraction profiles and the SP properties of the non-UV upturn galaxies in our sample are comparable to those of the UV upturn galaxies. This similarity may arise from the presence of residual star formation in the non-UV upturn systems.

Li, Xiejin [Chinese Academy of Sciences; Universit↗

Lack of chemical fractionation in major and minor elements during agglutinate formation

Rhodes et al. (1975, 1976) and Adams et al. (1975) have reported that the agglutinate fraction of the soils on the lunar surface displays a marked enrichment in Fe, Mg, Ti, K, and La, and a depletion in Ca, Na, Al, and Eu, relative to the bulk soils. The reported investigation is concerned with a testing of the theory of chemical fractionation involving magnetic separation which was developed in connection with these findings. Soils 64421 and 71501 were sieved and the magnetic fractions separated according to the method developed by Adams and McCord (1973). Analyses of agglutinitic glass did not indicate any appreciable chemical fractionation for the major and minor elements accompanying the agglutination process. It was found that most, if not all fractionations reported can be accounted for completely by the magnetic nonagglutinate impurities in the agglutinate fraction. It is, therefore, concluded that there appears to be no reason to make use of any chemical fractionation theory, whose validity remains to be demonstrated.

Hu, H.-N.↗

The Apollo 17 drill core - Chemical systematics of grain size fractions

Data for 35 major, minor, and trace elements in 40 bulk and size fractions of core 70005-70003 (140-250 cm) are presented. The core is heterogeneous with depth. Moreover, the 1000 to 90 micron coarse fractions are nearly identical but quite different from the less than 20 micron fine fraction. The bulk soil chemistry is governed by the coarse fractions, because of their greater weight proportion in the sample. The 1000-90 micron fraction contains more ilmenite basalt and less orange glass components than the 90-20 micron fraction. The less than 20 micron fraction is consistently enriched in highland material at all depths in the drill core.

Laul, J. C.↗

The Quasar Fraction in Low-Frequency Selected Complete Samples and Implications for Unified Schemes

Low-frequency radio surveys are ideal for selecting orientation-independent samples of extragalactic sources because the sample members are selected by virtue of their isotropic steep-spectrum extended emission. We use the new 7C Redshift Survey along with the brighter 3CRR and 6C samples to investigate the fraction of objects with observed broad emission lines - the 'quasar fraction' - as a function of redshift and of radio and narrow emission line luminosity. We find that the quasar fraction is more strongly dependent upon luminosity (both narrow line and radio) than it is on redshift. Above a narrow [OII] emission line luminosity of log(base 10) (L(sub [OII])/W) approximately > 35 [or radio luminosity log(base 10) (L(sub 151)/ W/Hz.sr) approximately > 26.5], the quasar fraction is virtually independent of redshift and luminosity; this is consistent with a simple unified scheme with an obscuring torus with a half-opening angle theta(sub trans) approximately equal 53 deg. For objects with less luminous narrow lines, the quasar fraction is lower. We show that this is not due to the difficulty of detecting lower-luminosity broad emission lines in a less luminous, but otherwise similar, quasar population. We discuss evidence which supports at least two probable physical causes for the drop in quasar fraction at low luminosity: (i) a gradual decrease in theta(sub trans) and/or a gradual increase in the fraction of lightly-reddened (0 approximately < A(sub V) approximately < 5) lines-of-sight with decreasing quasar luminosity; and (ii) the emergence of a distinct second population of low luminosity radio sources which, like M8T, lack a well-fed quasar nucleus and may well lack a thick obscuring torus.

Willott, Chris J.↗

Evaluation and Validation of the Messinger Freezing Fraction

One of the most important non-dimensional parameters used in ice-accretion modeling and scaling studies is the freezing fraction defined by the heat-balance analysis of Messinger. For fifty years this parameter has been used to indicate how rapidly freezing takes place when super-cooled water strikes a solid body. The value ranges from 0 (no freezing) to 1 (water freezes immediately on impact), and the magnitude has been shown to play a major role in determining the physical appearance of the accreted ice. Because of its importance to ice shape, this parameter and the physics underlying the expressions used to calculate it have been questioned from time to time. Until now, there has been no strong evidence either validating or casting doubt on the current expressions. This paper presents experimental measurements of the leading-edge thickness of a number of ice shapes for a variety of test conditions with nominal freezing fractions from 0.3 to 1.0. From these thickness measurements, experimental freezing fractions were calculated and compared with values found from the Messinger analysis as applied by Ruff. Within the experimental uncertainty of measuring the leading-edge thickness, agreement of the experimental and analytical freezing fraction was very good. It is also shown that values of analytical freezing fraction were entirely consistent with observed ice shapes at and near rime conditions: At an analytical freezing fraction of unity, experimental ice shapes displayed the classic rime shape, while for conditions producing analytical freezing fractions slightly lower than unity, glaze features started to appear.

Anderson, David N.↗