Search NASA⌕ Search

SEARCH · Search NASA

Results for “Group theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Structure and evolutionary history of the solar system. III.

Analysis of the plasma processes and the hydromagnetic aspects involved in the evolution of the solar system. In order to reduce the speculative element as far as possible, the present analysis tries to connect the cosmogonic processes as directly as possible to laboratory plasma physics and to space phenomena actually observed today. Models of the Laplacian type have been made obsolete by magnetohydrodynamics. Furthermore they are in conflict with observations. A new model is suggested. A plasma surrounding a rotating central body may attain a state of partial corotation which is determined by the balance between gravitation and the centrifugal force acting on a plasma in a dipole field. Condensation from a partially corotating plasma results in grains orbiting in ellipses with e = 1/3 and finally accreting to bodies at 2/3 of the central distance of the point of condensation. An application of the theory of the Saturnian rings and to the asteroidal belt shows that the fall-down ratio 2/3 (derived from the geometry of a dipole field) is essential for the understanding of their structure. The structure of the groups of planets and satellites is also discussed, but only in a preliminary way.

Alfven, H.↗
NASA NTRS1993

Structural similitude and design of scaled down laminated models

The excellent mechanical properties of laminated composite structures make them prime candidates for wide variety of applications in aerospace, mechanical and other branches of engineering. The enormous design flexibility of advanced composites is obtained at the cost of large number of design parameters. Due to complexity of the systems and lack of complete design based informations, designers tend to be conservative in their design. Furthermore, any new design is extensively evaluated experimentally until it achieves the necessary reliability, performance and safety. However, the experimental evaluation of composite structures are costly and time consuming. Consequently, it is extremely useful if a full-scale structure can be replaced by a similar scaled-down model which is much easier to work with. Furthermore, a dramatic reduction in cost and time can be achieved, if available experimental data of a specific structure can be used to predict the behavior of a group of similar systems. This study investigates problems associated with the design of scaled models. Such study is important since it provides the necessary scaling laws, and the factors which affect the accuracy of the scale models. Similitude theory is employed to develop the necessary similarity conditions (scaling laws). Scaling laws provide relationship between a full-scale structure and its scale model, and can be used to extrapolate the experimental data of a small, inexpensive, and testable model into design information for a large prototype. Due to large number of design parameters, the identification of the principal scaling laws by conventional method (dimensional analysis) is tedious. Similitude theory based on governing equations of the structural system is more direct and simpler in execution. The difficulty of making completely similar scale models often leads to accept certain type of distortion from exact duplication of the prototype (partial similarity). Both complete and partial similarity are discussed. The procedure consists of systematically observing the effect of each parameter and corresponding scaling laws. Then acceptable intervals and limitations for these parameters and scaling laws are discussed. In each case, a set of valid scaling factors and corresponding response scaling laws that accurately predict the response of prototypes from experimental models is introduced. The examples used include rectangular laminated plates under destabilizing loads, applied individually, vibrational characteristics of same plates, as well as cylindrical bending of beam-plates.

Simitses, G. J.↗
NASA NTRS1994

The delayed-detonation model of Type Ia supernovae. 2: The detonation phase

The investigation, by use of two-dimensional numerical hydrodynamics simulations, of the 'delayed detonation' mechanism of Khokhlov for the explosion of Type Ia supernovae is continued. Previously we found that the deflagration is insufficient to unbind the star. Expansion shuts off the flame; much of this small production of iron group nuclei occurs at lower densities, which reduces the electron-capture problem. Because the degenerate star has an adiabatic exponent only slightly above 4/3, the energy released by deflagration drives a pulsation of large amplitude. During the first expansion phase, adiabatic cooling shuts off the burning, and a Rayleigh-Taylor instability then gives mixing of high-entropy ashes with low-entropy fuel. During the first contraction phase, compressional heating reignites the material. The burning was allowed to develop into a detonation in these nonspherical models. The detonation grows toward spherical symmetry at late times. At these densities (rho approx. 10(exp 7) to 10(exp 8) g cm(exp -3)), either Ni-56 or nuclei of the Si-Ca group are the dominant products of the burning. The bulk yields are sensitive to the density of the star when the transition to detonation occurs. The relevance of the abundances, velocities, mixing, and total energy release to the theory and interpretation of Type Ia supernovae is discussed.

Arnett, David↗
NASA NTRS1996

Drops in Space: Super Oscillations and Surfactant Studies

An unprecedented microgravity observation of maximal shape oscillations of a surfactant-bearing water drop the size of a ping pong ball was observed during a mission of Space Shuttle Columbia as part of the second United States Microgravity Laboratory-USML-2 (STS-73, October 20-November 5, 1995). The observation was precipitated by the action of an intense sound field which produced a deforming force on the drop. When this deforming force was suddenly reduced, the drop executed nearly free and axisymmetric oscillations for several cycles, demonstrating a remarkable amplitude of nonlinear motion. Whether arising from the discussion of modes of oscillation of the atomic nucleus, or the explosion of stars, or how rain forms, the complex processes influencing the motion, fission, and coalescence of drops have fascinated scientists for centuries. Therefore, the axisymmetric oscillations of a maximally deformed liquid drop are noteworthy, not only for their scientific value but also for their aesthetic character. Scientists from Yale University, the Jet Propulsion Laboratory (JPL) and Vanderbilt University conducted liquid drop experiments in microgravity using the acoustic positioning/manipulation environment of the Drop Physics Module (DPM). The Yale/JPL group's objectives were to study the rheological properties of liquid drop surfaces on which are adsorbed surfactant molecules, and to infer surface properties such as surface tension, Gibb's elasticity, and surface dilatational viscosity by using a theory which relies on spherical symmetry to solve the momentum and mass transport equations.

Apfel, Robert E.↗
NASA NTRS2020

Effects of Long-Duration Space Flight on Training Retention and Transfer

The space environment imposes on the astronaut crew significant physiological, psycho-social, and cognitive loads that can not be replicated on the ground. These loads likely impact crew performance. To date, no systematic data collection has taken place to understand the effects of such loads on crew members ability to retain trained knowledge and skills, and to transfer such knowledge and skills to novel situations. The research described here was originally requested by HRP management to be the first such study to systematically collect data on the effects of long duration space flight on training retention and transfer. Because current theories of retention and transfer are based on results obtained in university laboratories using undergraduate students as research participants, and because crew time in space is very expensive, this study was designed to compare the performance of 4 groups of subjects: crew members in space, crew members on the ground, crew-like subjects, and university undergraduate students. Results from the ground-phase of the study reported here demonstrate that crew members performance under cognitive load can not be predicted from the performance of university undergraduate students. It is still an open question the extent to which crew members cognitive performance in space can be predicted from the performance of crew members on the ground.

Barshi, Immanuel↗
NASA NTRS2020

Effects of Long-Duration Space Flight on Training Retention and Transfer

The space environment imposes on the astronaut crew significant physiological, psycho-social, and cognitive loads that can not be replicated on the ground. These loads likely impact crew performance. To date, no systematic data collection has taken place to understand the effects of such loads on crew members’ ability to retain trained knowledge and skills, and to transfer such knowledge and skills to novel situations. The research described here was originally requested by HRP management to be the first such study to systematically collect data on the effects of long duration space flight on training retention and transfer. Because current theories of retention and transfer are based on results obtained in university laboratories using undergraduate students as research participants, and because crew time in space is very expensive, this study was designed to compare the performance of 4 groups of subjects: crew members in space, crew members on the ground, crew-like subjects, and university undergraduate students. Results from the ground-phase of the study reported here demonstrate that crew members’ performance under cognitive load can not be predicted from the performance of university undergraduate students. It is still an open question the extent to which crew members’ cognitive performance in space can be predicted from the performance of crew members on the ground.

training↗
NASA NTRSDate not supplied

Astronauts' Performance: The Retention and Transfer of Training

The space environment imposes on the astronaut crew significant physiological, psycho-social, and cognitive loads that can not be replicated on the ground. These loads likely impact crew performance. To date, no systematic data collection has taken place to understand the effects of such loads on crew members’ ability to retain trained knowledge and skills, and to transfer such knowledge and skills to novel situations. The research described here was originally designed to be the first such study to systematically collect data on the effects of long duration space flight on training retention and transfer. Because current theories of retention and transfer are based on results obtained in university laboratories using undergraduate students as research participants, and because crew time in space is very expensive, this study was designed to compare the performance of 4 groups of subjects: crew members in space, crew members on the ground, crew-like subjects, and university undergraduate students. Results from the ground-phase of the study reported here demonstrate that crew members’ performance under cognitive load can not be predicted from the performance of university undergraduate students. It is still an open question the extent to which crew members’ cognitive performance in space can be predicted from the performance of crew members on the ground.

training↗
NASA NTRS1974

Relationships among classes of self-oscillating transistor parallel inverters

A procedure is developed for classifying dc-to-square-wave two-transistor parallel inverters used in power conditioning applications. The inverters are reduced to equivalent RLC networks and are then grouped with other inverters with the same basic equivalent circuit. Distinction between inverter classes is based on the topology characteristics of the equivalent circuits. Information about one class can then be extended to another class using the basic oscillation theory and the concept of duality. Oscillograms from test circuits confirm the validity of the procedure adopted.

Wilson, T. G.↗
NASA NTRS1991

Renormalization group analysis of anisotropic diffusion in turbulent shear flows

The renormalization group is applied to compute anisotropic corrections to the scalar eddy diffusivity representation of turbulent diffusion of a passive scalar. The corrections are linear in the mean velocity gradients. All model constants are computed theoretically. A form of the theory valid at arbitrary Reynolds number is derived. The theory applies only when convection of the velocity-scalar correlation can be neglected. A ratio of diffusivity components, found experimentally to have a nearly constant value in a variety of shear flows, is computed theoretically for flows in a certain state of equilibrium. The theoretical value is well within the fairly narrow range of experimentally observed values. Theoretical predictions of this diffusivity ratio are also compared with data from experiments and direct numerical simulations of homogeneous shear flows with constant velocity and scalar gradients.

Rubinstein, Robert↗
NASA NTRS2002

Chemistry and Transport In a Multi-Dimensional Model

The focus of the work funded under this proposal is the exchange between the stratosphere and the troposphere, and between the troposphere and the blaspheme. These two interfaces represent the frontiers of atmospheric chemistry. It is the combination of exchange processes at both interfaces that ultimately controls how the blaspheme (including human activities) affects the ozone layer. The modeling work was motivated by and attempts to integrate information obtained by aircraft, spacecraft, shuttle and oceanic measurements. The model development and research activities accomplished in the past three years provide a technical and intellectual basis for the research in this group. The innovative part of our research program is related to the IAV of ozone and the hydrological cycle. Other related but independently supported work include the study of isotopic fractionation of atmospheric species, e.g., N2O and CO2. Our theory suggests that we now have the ability to probe the middle atmosphere at a level of sensitivity where subtle details such as the isotopic composition of simple molecules can yield measurable systematic effects. This creates the possibility for probing the chemistry and dynamics of the middle atmosphere using all of the N2O and CO2 isotopologues. In the following we will briefly describe the model development and review the highlights of recent accomplishments.

Yung, Yuk L.↗
NASA NTRS1991

Progress in understanding the renormalization group skewness and kappa-epsilon models

The immediate goal is to understand and validate the Yakhot-Orszag model of the velocity-derivative skewness and model equation for the rate of energy dissipation epsilon. A summary of a more detailed manuscript in preparation is presented. The purpose is to clarify some limitations of the theory by careful examination of key assumptions and approximations, and thereby to encourage its improvement.

Smith, Leslie M.↗
NASA NTRS2014

Experimental and Theoretical Study of Thermodynamics of the Reaction of Titania and Water at High Temperatures

The transpiration method was used to determine the volatility of titanium dioxide (TiO2) in water vapor-containing environments at temperatures between 1473 and 1673 K. Water contents ranged from 0 to 76 mole % in oxygen or argon carrier gases for 20 to 250 hr exposure times. Results indicate that oxygen is not a key contributor to volatilization and the primary reaction for volatilization in this temperature range is: TiO2(s) + H2O(g) = TiO(OH)2(g). Data were analyzed with both the second and third law methods to extract an enthalpy and entropy of formation. The geometry and vibrational frequencies of TiO(OH)2(g) were computed using B3LYP density functional theory, and the enthalpy of formation was computed using the coupled-cluster singles and doubles method with a perturbative correction for connected triple substitutions [CCSD(T)]. Thermal functions are calculated using both a structure with bent and linear hydroxyl groups. Calculated second and third heats show closer agreement with the linear hydroxyl group, suggesting more experimental and computational spectroscopic and structural work is needed on this system.

equilibrium↗
NASA NTRS1975

Emerging Flux Regions

All active regions are born as Emerging Flux Regions (EFRs) which appear in H alpha as two small plages of opposite polarity connected by parallel dark arches. After a brief review of the properties of EFRs, new observations of the birth of an EFR and apparent subsequent field reconnection are reported. Fluxrope theories are reviewed, the appearance of EFRs is predicted, and this picture is then modified on the basis of high resolution observations. One arrives at a model of this phenomenon that encompasses relevant aspects such as the axial tilt of spot groups, the observed 'rotation' of EFRs as they emerge, and the fact that EFR fluxtubes are made up of many discrete strands.

Glackin, D. L.↗
NASA NTRS1999

A Grouped Threshold Approach for Scene Identification in AVHRR Imagery

The authors propose a grouped threshold method for scene identification in Advanced Very High Resolution Radiometer imagery that may contain clouds, fire, smoke, or snow. The philosophy of the approach is to build modules that contain groups of spectral threshold tests that are applied concurrently, not sequentially, to each pixel in an image. The purpose of each group of tests is to identify uniquely a specific class in the image, such as smoke. A strength of this approach is that insight into the limits used in the threshold tests may be gained through the use of radiative transfer theory. Methodology and examples are provided for two different scenes, one containing clouds, forest fires, and smoke; and the other containing clouds over snow in the central United States. For both scenes, a limited amount of supporting information is provided by surface observers.

Baum, Bryan A.↗
NASA NTRS1998

Locating and Determining the Nature of a Persistent Hard X-Ray Source GROJ1814-12

The nature of the persistent hard X-ray source GROJ1814-12 discovered by BATSE a year ago is puzzling. Several potential X-ray sources are in the approximately 25 ft radius error box. Our XTE scanning observation attempted to determine the exact position of the hard X-ray source with respect with other sources. No obvious candidate is emerging from the analysis. A report is being prepared by the observing group. The persistent hard X-ray source GROJ1814-12 might be an example of a low-mass X-ray binary producing a strong flux of hard X-rays, and therefore be of the greatest importance for the theory of neutron star emission.

Tavani, Marco↗
NASA NTRSDate not supplied

Improved Fermion Hamiltonians for Quantum Simulations

Constructing improved hamiltonians for gauge theories coupled to fermonic matter will be important for improving continuum limit extrapolations of quantum computations. In this talk we will present a formulation for simulating ASQTAD fermions for lattice computation and provide fault tolerant resource costs in terms of primitive group operations. We additionally show that the scaling of energies with respect to the lattice spacing are better than for the unimproved Hamiltonian for toy models.

Erik Joseph Gustafson↗
NASA NTRSDate not supplied

Improved Fermion Hamiltonians for Quantum Simulations

Constructing improved hamiltonians for gauge theories coupled to fermonic matter will be important for improving continuum limit extrapolations of quantum computations. In this talk we will present a formulation for simulating ASQTAD fermions for lattice computation and provide fault tolerant resource costs in terms of primitive group operations. We additionally show that the scaling of energies with respect to the lattice spacing are better than for the unimproved Hamiltonian for toy models.

Erik Gustafson↗
NASA NTRS2001

Surfactant Facilitated Spreading of Aqueous Drops on Hydrophobic Surfaces

Microgravity technologies often require aqueous phases to spread over nonwetting hydrophobic solid surfaces. Surfactants facilitate the wetting of water on hydrophobic surfaces by adsorbing on the water/air and hydrophobic solid/water interfaces and lowering the surface tensions of these interfaces. The tension reductions decrease the contact angle, which increases the equilibrium wetted area. Hydrocarbon surfactants; (i.e., amphiphiles with a hydrophobic moiety consisting of an extended chain of (aliphatic) methylene -CH2- groups attached to a large polar group to give aqueous solubility) are capable of reducing the contact angles on surfaces which are not very hydrophobic, but do not reduce significantly the contact angles of the very hydrophobic surfaces such as parafilm, polyethylene or self assembled monolayers. Trisiloxane surfactants (amphiphiles with a hydrophobe consisting of methyl groups linked to a trisiloxane backbone in the form of a disk ((CH3)3-Si-O-Si-O-Si(CH3)3) and an extended ethoxylate (-(OCH2CH2)a-) polar group in the form of a chain with four or eight units) can significantly reduce the contact angle of water on a very hydrophobic surface and cause rapid and complete (or nearly complete) spreading (termed superspreading). The overall goal of the research described in this proposal is to establish and verify a theory for how trisiloxanes cause superspreading, and then use this knowledge as a guide to developing more general hydrocarbon based surfactant systems which superspread. We propose that the trisiloxane surfactants superspread because their structure allows them to strongly lower the high hydrophobic solid/aqueous tension when they adsorb to the solid surface. When the siloxane adsorbs, the hydrophobic disk parts of the molecule adsorb onto the surface removing the surface water. Since the cross-sectional area of the disk is larger than that of the extended ethoxylate chain, the disks can form a space-filling mat on the surface which removes a significant amount of the surface water. In this presentation, we report the results of measurements of the molecular packing and rates of kinetic exchange of the trisiloxane surfactants at the air/water interface in order to confirm our picture of trisiloxane packing, and provide additional insight into the superspreading process. We used the pendant bubble technique as a Langmuir trough to measure the trisiloxane equation of state which relates the tension to the surface concentration. From these measurements we obtain accurate values for the maximum packing density. We find that trisiloxanes with 4 and 8 ethoxylate groups have the same maximum packing concentration, indicating that the maximum packing is controlled by the cross section of the head group. For trisiloxanes with larger than eight ethoxylates, the maximum packing increases with ethoxylate number, indicating that the disposition of the ethoxylate chain (i.e., its effective size) is controlling. This supports our picture of superspreading: The superspreading ability of trisiloxanes decreases considerably for trisiloxanes with larger than eight ethoxylates; the packing measurements indicate that for the higher ethoxylate number trisiloxanes, the compact nonpolar head groups are pushed apart by the ethoxylate chain. They leave spaces of surface water on adsorption and do not lower the solid tension as much as their lower chain analogues. Finally the report measurements of the dynamic tension reduction accompanying the adsorption of trisiloxanes onto an initially clean interface using the pendant bubble technique, and we obtain from these relaxations, the equation of state and a mass transfer model, the rate constants for kinetic exchange. We find that the rate constants for desorption of trisiloxanes are generally much slower than for analogous aliphatic polyethoxylate surfactants with identical ethoxylate chain lengths. When an aqueous drop of a superspreader solution is placed on a hydrophobic surface and begins to spread, the lower desorption rates allows the tension at the drop center to remain reduced relative to the tension of the expanding periphery, thus strengthening Marangoni forces which can assist the spreading. Marangoni forces can be especially significant in the case of superspreaders because their maximum equilibrium reduction in tension is several dynes/cm lower than for aliphatic surfactants.

Kumar, Nitin↗