Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hot structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Solution-Processed Temperature-Adaptive Radiative Paint as a Thermal Imaging Sensitizer

Thermography detects mid-infrared radiation from surfaces based on the Stefan-Boltzmann law, mapping surface temperatures and potentially revealing subsurface thermal activity. Recent developments offer an alternative strategy to traditional camera-based improvements: a thermal imaging sensitizer (TIS) coating whose emissivity increases sharply with local temperature, amplifying small thermal variations into high-contrast signals. Existing TIS structures are nanofabricated solid membranes and face significant challenges in fabrication complexity. Here, in this study, we present a solution-processed, liquid form of TIS, termed temperature-adaptive radiative paint (TARP), to address these limitations. TARP offers drastically reduced fabrication costs, scalability to large areas, applicability to curved surfaces, and an extended operating temperature range, while maintaining the function of temperature amplification. Application of TARP enhances small temperature contrast by more than 3 times, substantially improving ambient thermography and enabling broader applications such as detection of structural defects and hot spots in electronic components.

paint↗

CuS p-type thin film characterization deposited on Ti, ITO and glass substrates using spray pyrolysis deposition (SPD) for light emitting diode (LED) application

The copper sulphide (CuS) thin films were grown with good adhesion by spray pyrolysis deposition (SPD) on Ti, ITO and glass substrates at 200 °C. The distance between nozzle and substrate is 30 cm. The composition was prepared by mixing copper chloride CuCl{sub 2}.2H{sub 2}O as a source of Cu{sup 2+} and sodium thiosulfate Na{sub 2}S{sub 2}O{sub 3}.5H{sub 2}O as a source of and S{sup 2−}. Two concentrations (0.2 and 0.4 M) were used for each CuCl{sub 2} and Na{sub 2}S{sub 2}O{sub 3} to be prepared and then sprayed (20 ml). The process was started by spraying the solution for 3 seconds and after 10 seconds the cycle was repeated until the solution was sprayed completely on the hot substrates. The structural characteristics were studied using X-ray diffraction; they showed covellite CuS hexagonal crystal structure for 0.2 M concentration, and covellite CuS hexagonal crystal structure with two small peaks of chalcocite Cu{sub 2}S hexagonal crystal structure for 0.4 M concentration. Also the surface and electrical characteristics were investigated using Field Emission Scanning Electron Microscopy (FESEM) and current source device, respectively. The surface study for the CuS thin films showed nanorods to be established for 0.2 M concentration and mix of nanorods and nanoplates for 0.4 M concentration. The electrical study showed ohmic behavior and low resistivity for these films. Hall Effect was measured for these thin films, it showed that all samples of CuS are p- type thin films and ensured that the resistivity for thin films of 0.2 M concentration was lower than that of 0.4 M concentration; and for the two concentrations CuS thin film deposited on ITO had the lowest resistivity. This leads to the result that the conductivity was high for CuS thin film deposited on ITO substrate, and the conductivity of the three thin films of 0.2 M concentration was higher than that of 0.4 M concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-fast LuI{sub 3}:Ce scintillators for hard x-ray imaging

We have developed ultra-fast cerium-coped lutetium-iodide (LuI{sub 3}:Ce) films thermally evaporated as polycrystalline, structured scintillator using hot wall epitaxy (HWE) method. The films have shown a 13 ns decay compared to the 28 ns reported for crystals. The fast speed coupled with its high density (∼5.6 g/cm{sup 3}), high effective atomic number (59.7), and the fact that it can be vapor deposited in a columnar form makes LuI{sub 3}:Ce an attractive candidate for high frame rate, high-resolution, hard X-ray imaging. In crystal form, LuI{sub 3}:Ce has demonstrated bright (>100,000 photons/MeV) green (540 nm) emission, which is well matched to commercial CCD/CMOS sensors and is critical for maintaining high signal to noise ratio in light starved applications. Here, we report on the scintillation properties of films and those for corresponding crystalline material. The vapor grown films were integrated into a high-speed CMOS imager to demonstrate high-speed radiography capability. The films were also tested at Advanced Photon Source, Argonne National Laboratory beamline 1-ID under hard X-ray irradiation. The data show a factor of four higher efficiency than the reference LuAG:Ce scintillators, high image quality, and linearity of scintillation response over a wide energy range. The films were employed to perform hard X-ray microtomography, the results of which will also be discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiphysics Analyses of the Bottom Components of the 3D Printed Transformational Challenge Reactor

This research presents multi-physics analyses on the bottom components of the Transformational Challenge Reactor (TCR) facility. These components include the bottom axial reflector and the steel exit cone. The bottom axial reflector is made of pure silicon carbide elements hosting helium cooling channels These elements are 3D printed and therefore can host any arbitrary shape of the helium cooling channels. The design of the bottom reflector considers the neutronics and thermo-fluid dynamics performances as well as the manufacturing process optimization. More precisely, the best design of the bottom reflector reduces neutron leakage by avoiding straight cylindrical helium channels that facilitate neutron leakage, minimizes the helium flow pressure drop, and reduces the number of 3D printed silicon carbide pieces. The exit cone steel structure collects the hot helium from the bottom fuel assemblies and channels the cold helium to the top of the fuel assemblies. The steel simultaneous contact with hot and cold helium flows sets a large thermal gradient. Different designs of the exit cone are proposed to reduce the steel equivalent stress from the helium thermal load. The multi-physics analyses have been performed using Ansys Fluent, Ansys Mechanical, STAR-CCM+, and Serpent computer programs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A CHANDRA X-RAY VIEW OF STEPHAN'S QUINTET: SHOCKS AND STAR FORMATION

We use a deep Chandra observation to examine the structure of the hot intra-group medium of the compact group of galaxies Stephan's Quintet. The group is thought to be undergoing a strong dynamical interaction as an interloper, NGC 7318b, passes through the group core at {approx}850kms{sup -1}. Previous studies have interpreted a bright ridge of X-ray and radio continuum emission as the result of shock heating, with support from observations at other wavelengths. We find that gas in this ridge has a similar temperature ({approx}0.6 keV) and abundance ({approx}0.3 Z {sub sun}) to the surrounding diffuse emission, and that a hard emission component is consistent with that expected from high-mass X-ray binaries associated with star formation in the ridge. The cooling rate of gas in the ridge is consistent with the current star formation rate, suggesting that radiative cooling is driving the observed star formation. The lack of a high-temperature gas component is used to place constraints on the nature of the interaction and shock, and we find that an oblique shock heating a pre-existing filament of H I may be the most likely explanation of the X-ray gas in the ridge. The mass of hot gas in the group is roughly equal to the deficit in observed H I mass compared to predictions, but only {approx}2% of the gas is contained in the ridge. The hot gas component is too extended to have been heated by the current interaction, strongly suggesting that it must have been heated during previous dynamical encounters.

79 ASTRONOMY AND ASTROPHYSICS↗

Pressure Profiles of Distant Galaxy Clusters in the Planck Catalogue

Successive releases of Planck data have demonstrated the strength of the Sunyaev–Zeldovich (SZ) effect in detecting hot baryons out to the galaxy cluster peripheries. To infer the hot gas pressure structure from nearby galaxy clusters to more distant objects, we developed a parametric method that models the spectral energy distribution and spatial anisotropies of both the Galactic thermal dust (GTD) and the cosmic microwave background (CMB), which are combined with the cluster SZ and dust signals. Taking advantage of the best angular resolution of the High Frequency Instrument channels (5 arcmin) and using X-ray priors in the innermost cluster regions that are not resolved with Planck, this modeling allowed us to analyze a sample of 61 nearby members of the Planck Catalogue of SZ sources (0<z<0.5, z-tilde =0.15) using the full mission data, as well as to examine a distant sample of 23 clusters (0.5<z<1, z-tilde =0.56) that have been recently followed-up with XMM-Newton and Chandra observations. We find that (i) the average shape of the mass-scaled pressure profiles agrees with results obtained by the Planck Collaboration in the nearby cluster sample, and that (ii) no sign of evolution is discernible between averaged pressure profiles of the low- and high-redshift cluster samples. In line with theoretical predictions for these halo masses and redshift ranges, the dispersion of individual profiles relative to a self-similar shape stays well below 10% inside r {sub 500} but increases in the cluster outskirts.

79 ASTRONOMY AND ASTROPHYSICS↗

Preliminary Evidence for a Virial Shock around the Coma Galaxy Cluster

Galaxy clusters, the largest gravitationally bound objects in the universe, are thought to grow by accreting mass from their surroundings through large-scale virial shocks. Due to electron acceleration in such a shock, it should appear as a γ-ray, hard X-ray, and radio ring, elongated toward the large-scale filaments feeding the cluster, coincident with a cutoff in the thermal Sunyaev–Zel’dovich (SZ) signal. However, no such signature was found until now, and the very existence of cluster virial shocks has remained a theory. We find preliminary evidence for a large γ-ray ring of ∼5 Mpc minor axis around the Coma cluster, elongated toward the large-scale filament connecting Coma and Abell 1367, detected at the nominal 2.7σ confidence level (5.1σ using control signal simulations). The γ-ray ring correlates both with a synchrotron signal and with the SZ cutoff, but not with Galactic tracers. The γ-ray and radio signatures agree with analytic and numerical predictions if the shock deposits ∼1% of the thermal energy in relativistic electrons over a Hubble time and ∼1% in magnetic fields. The implied inverse Compton and synchrotron cumulative emission from similar shocks can contribute significantly to the diffuse extragalactic γ-ray and low-frequency radio backgrounds. Our results, if confirmed, reveal the prolate structure of the hot gas in Coma, the feeding pattern of the cluster, and properties of the surrounding large-scale voids and filaments. The anticipated detection of such shocks around other clusters would provide a powerful new cosmological probe.

79 ASTRONOMY AND ASTROPHYSICS↗

BioRT-Flux-PIHM v1.0: a biogeochemical reactive transport model at the watershed scale

Watersheds are the fundamental Earth surface functioning units that connect the land to aquatic systems. Many watershed-scale models represent hydrological processes but not biogeochemical reactive transport processes. This has limited our capability to understand and predict solute export, water chemistry and quality, and Earth system response to changing climate and anthropogenic conditions. Here we present a recently developed BioRT-Flux-PIHM (BioRT hereafter) v1.0, a watershed-scale biogeochemical reactive transport model. The model augments the previously developed RT-Flux-PIHM that integrates land-surface interactions, surface hydrology, and abiotic geochemical reactions. It enables the simulation of (1) shallow and deep-water partitioning to represent surface runoff, shallow soil water, and deeper groundwater and of (2) biotic processes including plant uptake, soil respiration, and nutrient transformation. The reactive transport part of the code has been verified against the widely used reactive transport code CrunchTope. BioRT-Flux-PIHM v1.0 has recently been applied in multiple watersheds under diverse climate, vegetation, and geological conditions. This paper briefly introduces the governing equations and model structure with a focus on new aspects of the model. It also showcases one hydrology example that simulates shallow and deep-water interactions and two biogeochemical examples relevant to nitrate and dissolved organic carbon (DOC). These examples are illustrated in two simulation modes of complexity. One is the spatially lumped mode (i.e., two land cells connected by one river segment) that focuses on processes and average behavior of a watershed. Another is the spatially distributed mode (i.e., hundreds of cells) that includes details of topography, land cover, and soil properties. Whereas the spatially lumped mode represents averaged properties and processes and temporal variations, the spatially distributed mode can be used to understand the impacts of spatial structure and identify hot spots of biogeochemical reactions. The model can be used to mechanistically understand coupled hydrological and biogeochemical processes under gradients of climate, vegetation, geology, and land use conditions.

54 ENVIRONMENTAL SCIENCES↗

Nuclear rocket know-how.

Nuclear rockets operating efficiency and flexibility, reliability, safety, hot high stress structures, nozzle cooling, etc

Gabriel, D.↗

Satellite geological and geophysical remote sensing of Iceland

The author has identified the following significant results. A low sun angle (as low as 7 degrees) on ERTS-1 imagery, particularly when the terrain is snow-covered, markedly enhances subtle geologic structure and landforms. Hot springs, discharging into frozen lakes, from an ice-free area which can be easily seen on ERTS-1 imagery. In remote areas ERTS-1 imagery can be used in climatological studies by using the time of lake ice freeze-up and break-up as a measure over large areas. ERTS-1 imagery of the erupting volcano, Kirkjufell, on the island of Heimaey was cloud covered. ERTS-1 provides a powerful new tool for volcanologists to study erupting volcanoes, new deposits of lava, and the direction and areal distribution of the eruption plume. Some success was achieved in a preliminary study, using photogrammetric instrumentation, of measuring relative elevation of mountains using ERTS-1 imagery of iceland, where considerable overlap exists in successive orbits.

Williams, R. S., Jr.↗

OSO-8 X-ray spectra of clusters of galaxies. 2: Discussion

X-ray spectral parameters obtained from 2 to 20 keV OSO-8 data on X-ray clusters and optical cluster properties were examined to obtain information for restricting models for hot intracluster gas structures. Topics discussed include the radius of the X-ray core in relation to the galaxy core radius, the viral mass of hotter clusters, and galaxy density and optical central cluster properties. A population of cool, dim X-ray clusters which have not been observed is predicted. The iron abundance determinations recently quoted for intracluster gas are uncertain by 50 to greater than 100 percent from this nonstatistical cause alone.

Smith, B. W.↗

Structural fatigue test results for large wind turbine blade sections

In order to provide quantitative information on the operating life capabilities of wind turbine rotor blade concepts for root-end load transfer, a series of cantilever beam fatigue tests was conducted. Fatigue tests were conducted on a laminated wood blade with bonded steel studs, a low cost steel spar (utility pole) with a welded flange, a utility pole with additional root-end thickness provided by a swaged collar, fiberglass spars with both bonded and nonbonded fittings, and, finally, an aluminum blade with a bolted steel fitting (Lockheed Mod-0 blade). Photographs, data, and conclusions for each of these tests are presented. In addition, the aluminum blade test results are compared to field failure information; these results provide evidence that the cantilever beam type of fatigue test is a satisfactory method for obtaining qualitative data on blade life expectancy and for identifying structurally underdesigned areas (hot spots).

Faddoul, J. R.↗

What bends 3C 465?

This paper studies the interaction of the prototypical wide-angle tailed radio source 3C 465 with the ambient cluster gas. 3C 465 is attached to the dominant D galaxy NGC 7720 in the cluster Abell 2634. New VLA maps of the radio source are presented which reveal an inner jet and a rapid change of structure at the hot spots at the beginning of each tail. New X-ray maps of the cluster gas are also presented. It is shown that the sharp bend of the flowing radio-luminous plasma between the inner jets and the beginning of the tails cannot be explained by any of the conventional models. Neither galactic motion, buoyancy, gravitational bending, nor dynamic pressure can account for the bending of this source. Attention is also given to new possibilities for the dynamics of this type of radio tailed source: the effect of a current in the jets, and the interaction with cooling clouds in the cluster gas.

Eilek, J. A.↗

The mass profile and gas content of M87

X-ray images and spectroscopic observations, in particular of the Fe L lines, are used to constrain the structure of the hot gas and gravitating matter around M87 with respect to allowable temperature gradient, and therefore gravitational potential, over the 1-10 arcmin radius range. Models in which the gravitating mass has a core radius of about 25 kpc are favored, suggesting that the material is associated with M87 rather than with the Virgo cluster as a whole. The gas temperature is noted to vary slowly beyond 5 arcmin, while the variation in the inner regions is not consistent with thermal conduction models for powering the central X-ray emission.

Stewart, G. C.↗

Iron/Phosphorus Alloys for Continuous Casting

Continuous casting becomes practicable because of reduced eutectic temperature. Experimental ferrous alloy has melting point about 350 degrees C lower than conventional steels, making possible to cast structural members and eliminating need for hot rolling. Product has normal metal structure and good physical properties. Process used to make rails, beams, slabs, channels, and pipes.

Dufresne, E. R.↗

Constitutive modeling for isotropic materials (HOST)

This report presents the results of the second year of work on a problem which is part of the NASA HOST Program. Its goals are: (1) to develop and validate unified constitutive models for isotropic materials, and (2) to demonstrate their usefulness for structural analyses of hot section components of gas turbine engines. The unified models selected for development and evaluation are that of Bodner-Partom and Walker. For model evaluation purposes, a large constitutive data base is generated for a B1900 + Hf alloy by performing uniaxial tensile, creep, cyclic, stress relation, and thermomechanical fatigue (TMF) tests as well as biaxial (tension/torsion) tests under proportional and nonproportional loading over a wide range of strain rates and temperatures. Systematic approaches for evaluating material constants from a small subset of the data base are developed. Correlations of the uniaxial and biaxial tests data with the theories of Bodner-Partom and Walker are performed to establish the accuracy, range of applicability, and integability of the models. Both models are implemented in the MARC finite element computer code and used for TMF analyses. Benchmark notch round experiments are conducted and the results compared with finite-element analyses using the MARC code and the Walker model.

Lindholm, U. S.↗

Spacelab 1 experiments on interactions of an energetic electron beam with neutral gas

An unusual signature of return current and spacecraft charging potential was observed during the Spacelab 1 mission launched on November 28, 1983. The phenomenon occurred during neutral gas releases from the SEPAC (Space Experiments with Particle Accelerators) magnetoplasma-dynamic arcjet (MPD) concurrent with firings of the PICPAB (Phenomena Induced by Charged Particle Beams) electron gun and was recorded by the instruments of the SEPAC diagnostic package (DGP). Data from the langmuir probe, floating probes, neutral gas pressure gauge, and the plasma wave probes are reported. As the dense neutral gas was released, the return current measured by the langmuir probe changed from positive to negative and a positive potential relative to the spacecraft was measured by the floating probe. The anomalous return current is believed to be attributable to secondary electron fluxes escaping from the spacecraft, and the unusual charging situation is attributed to the formation of a double-layer structure between a hot plasma cloud localized to the MPD and the spacecraft. The charging scenario is supported by a computer simulation.

Marshall, J. A.↗

The effects of Compton scattering in X-ray spectra

The ways in which Compton scattering on free electrons influences the continuous spectrum and temperature structure of a hot stellar atmosphere, where most of its radiation is emitted in the 1-10 keV energy range, are discussed. The numerical results pertain to the continuum spectra of X-ray bursters. The formulation and development of the numerical code, which reproduces angle-averaged relativistic Compton scattering of thermal (unpolarized) X-rays in a plane-parallel atmosphere in hydrostatic and radiative equilibrium, are described.

Madej, Jerzy↗