Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen isotopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Tank 11H Low Temperature Aluminum Dissolution and Inhalation Dose Potential Analyses at Savannah River Site – 26018

Currently, there is approximately 34 million gallons of high-level radioactive tank waste in the Tank Farm at the Savannah River Site (SRS). The ultimate goal of operations at the Tank Farm is to remove the high level waste (HLW) from the tanks followed by stabilization of the waste through vitrification of the HLW into glass or grouting the decontaminated waste into saltstone. After bulk removal of the HLW consisting of sludge, saltcake, and supernatant, further efforts are made to reduce the residual waste present in the tank in order to declare preliminary cease waste removal (PCWR) signifying completion of HLW removal. These reduction efforts can include tank washing to remove soluble salts and radioisotopes and dissolution of solids including aluminum. Aluminum in the form of gibbsite and boehmite is relatively insoluble in water. Through addition of aqueous sodium hydroxide, the aluminum can be dissolved at mild temperatures. In order for the waste tank to meet closure mode requirements of the Concentration, Storage, and Transfer Facilities (CSTF), which includes the Tank Farm, Documented Safety Analysis (DSA), a component of the safety basis, the inhalation dose potential (IDP) and the radiolytic hydrogen generation rate of the stored waste must be demonstrated to be lower than their respective designated limits. These parameters are calculated from measured radiochemical analyses of isotopes that emit a high amount of radioactivity including Cs-137, Sr-90, Pu-238, Pu-239, Pu-240, Pu-241, Am-241, and Cm-244. Following the low temperature aluminum dissolution (LTAD) process, Tank 11H slurry samples were pulled from the tank and sent to Savannah River National Laboratory (SRNL) to measure the extent of aluminum dissolution, hydroxide concentration, densities of slurry and supernatant, weight percent solids analyses, and radionuclide activities. The analyses of the composite sample found that approximately 90% of the total aluminum in the slurry was dissolved, indicating successful reduction of the insoluble aluminum in the waste tank. Additionally, the weight percent insoluble solids (slurry basis) measurement of the composite sample was found to be approximately 1%, demonstrating that minimal solids still remain in the tank. Finally, the radiochemical analyses of the composite sample determined that the waste contents of the tank met the IDP and radiolytic hydrogen generation rate requirements of the CSTF DSA. These measurements have shown that the LTAD process in Tank 11H was successful in waste reduction efforts and a positive step towards declaring PCWR and tank closure at SRS.

Dekarske, John [Savannah River National Laboratory↗
DOE OSTI2022

Crystallographic dependence of CO 2 hydrogenation pathways over HCP-Co and FCC-Co catalysts

We report efficient conversion of CO 2 is of great significance for sustainable supply of chemicals and fuels. While Co-based catalysts are known to be effective for CO hydrogenation in Fischer-Tropsch synthesis, they work very differently in CO 2 hydrogenation. This study reveals a crystallographic dependence of reaction pathways for CO 2 hydrogenation on Co catalyst showing a new type of structure sensitivity and structure-activity-selectivity relationship for CO 2 conversion to chemicals and fuels. The experimental work on CO 2 conversion including steady-state isotopic transient kinetic analysis (SSITKA) using 13 C-labeled CO 2 shows a preferential CH 4 formation over HCP-Co but dominant CO formation over FCC-Co. The density functional theory calculations indicate that CO 2 does dissociate directly into chemisorbed CO * and O * on both HCP-Co and FCC-Co, but the CO * intermediates on HCP-Co prefer to be hydrogenated to form CH 4 whereas the CO* on FCC-Co preferentially desorb to form CO. The significantly altered adsorption strength of CO * due to the presence of chemisorbed O * and CO 2 * species on the catalyst surface is responsible for the mechanistic disconnection in product selectivity between the CO 2 and CO hydrogenation over Co catalysts. This study also shows that the addition of K to Co diminishes the direct impact of Co crystal structure, but improves the selectivity to C 2 + hydrocarbons along with higher CO 2 conversion. This seems to result from another pathway originating from HCOO* intermediate from bonding interaction of surface Co atoms with carbon in CO 2 , leading to the formation of CH x * whose coupling subsequently give rises to C 2 + products. The present study sheds new light into the crystallographic structural sensitivity of CO 2 hydrogenation towards the rational design of more selective catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Power and isotope effects in the ITER baseline scenario with tungsten and tungsten-equivalent radiators in DIII-D

Abstract Experiments in DIII-D document the ITER Baseline Scenario (IBS) at q 95 ∼ 3 and P IN / P LH ∼ 1–2, in both deuterium and hydrogen utilizing Kr and Xe as Tungsten-equivalent radiators. The power threshold for H-mode operation ( P LH ) was determined experimentally without added impurities and found to be about a factor of two higher than the scaling law. In recent IBS experiments in deuterium, intrinsic levels of metals such as Tungsten (W) or molybdenum and inconel are present that reduce the pedestal pressure by 20%–25%. A complete radiative collapse of deuterium IBS plasmas occurs at W core concentrations C W = 10 −5 . Simulations show that for core temperatures expected for ITER, the plasmas would not have a radiative collapse at C W = 1 × 10 −5 , moreover Q = 8–10 would still be achieved for C W up to 3 × 10 −5 . In contrast to deuterium, the IBS in hydrogen is not affected by intrinsic high-Z impurities, indicating that hydrogen H-modes in ITER may not inform the D-T phase with respect to W accumulation and discharge survival. Compared to deuterium, the pedestal pressure in hydrogen is ∼25% lower, with much higher ELM frequency of 150 Hz, decreasing with input power. Krypton was injected in a matrix scan of input power and impurity flow in IBS hydrogen discharges. Krypton impurity density profiles in hydrogen are similar to deuterium plasmas, but at Kr flows that are 2–3 times higher for the same input power. Krypton is transported into the core and affects the whole radius; at the highest injection rates a radiative collapse occurs at core radiation fractions of 0.3–0.35, consistent with the expected maximum W radiation fraction for ITER core plasmas. Comparing the results with previous International Tokamak Physics Activity database studies of the IBS confirms that at higher radiation fraction due to high-Z impurities, a drop in H 98 of >10% is observed. On the other hand, the results using Kr as a W-equivalent radiator indicate that metal (W) devices at lower core temperatures than ITER may provide overly pessimistic performance extrapolations to ITER for deuterium-tritium operation. The new DIII-D results support a more attractive option for the ITER Research Plan with a short hydrogen phase for system commissioning, transitioning to deuterium operations as soon as possible to provide relevant conditions for deuterium-tritium operations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Isotopically Selective Quantification by UPLC-MS of Aqueous Ammonia at Submicromolar Concentrations Using Dansyl Chloride Derivatization

Ammonia (NH 3 ) is necessary for food production and is commercially synthesized from nitrogen (N 2 ) and hydrogen (H 2 ) using the Haber–Bosch process. Significant amounts of ammonia are made every year in a reaction that requires high temperatures and pressures, with the Haber–Bosch accounting for ~1.6% of total annual global energy consumption. Electrocatalysts are also being explored to convert in an environmentally friendly manner N 2 to NH 3 at ambient temperature and pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structure and Dynamics of Imidazolium in an Ionic Liquid-PEGDA Iongel via IR, 2D-IR, and NMR Spectroscopy

Fourier transform infrared (FTIR) absorption spectroscopy, ultrafast two-dimensional infrared (2D-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and density functional theory (DFT) calculations show that, in iongels composed of 1-ethyl-3-methylimidazolium bis(trifluoromethyl\-sulfonyl)imide ([C 2 C 1 Im][Tf 2 N]}) and cross-linked poly(ethylene glycol)diacrylate (cl-PEGDA), imidazolium cations solvate PEGDA chains in tight and loose complexes. H/D isotope substitution at the 2-position of the imidazolium ring simplifies the CH-stretching vibrational bands. Tight complexes are characterized by stronger, directional hydrogen bonding interactions between the 2-position of the imidazolium ring and the ethereal oxygens. The loose complexes resemble bulk ionic liquid (IL) non-specifically perturbed by the PEGDA chains.

ionic liquids, carbon dioxide, cross-linked PEGDA,↗
DOE OSTI2020

Quantitative Long-Term Monitoring of the Circulating Gases in the KATRIN Experiment Using Raman Spectroscopy

The Karlsruhe Tritium Neutrino (KATRIN) experiment aims at measuring the effective electron neutrino mass with a sensitivity of 0.2 eV/c2, i.e., improving on previous measurements by an order of magnitude. Neutrino mass data taking with KATRIN commenced in early 2019, and after only a few weeks of data recording, analysis of these data showed the success of KATRIN, improving on the known neutrino mass limit by a factor of about two. This success very much could be ascribed to the fact that most of the system components met, or even surpassed, the required specifications during long-term operation. Here, we report on the performance of the laser Raman (LARA) monitoring system which provides continuous high-precision information on the gas composition injected into the experiment’s windowless gaseous tritium source (WGTS), specifically on its isotopic purity of tritium—one of the key parameters required in the derivation of the electron neutrino mass. The concentrations cx for all six hydrogen isotopologues were monitored simultaneously, with a measurement precision for individual components of the order 10−3 or better throughout the complete KATRIN data taking campaigns to date. From these, the tritium purity, εT, is derived with precision of <10−3 and trueness of <3 × 10−3, being within and surpassing the actual requirements for KATRIN, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Infrared Spectroscopic Observation of Oxo- and Superoxo-Intermediates in the Water Oxidation Cycle of a Molecular Ir Catalyst

Molecular Ir catalysts have emerged as an important class of model catalysts for understanding structure–activity relationships in water oxidation, a reaction that is central to renewable fuel synthesis. Prior efforts have mostly focused on controlling and elucidating the emergence of active species from prepared precursors. However, the development of efficient and stable molecular Ir catalysts also necessitates probing of reaction intermediates. To date, relatively little is known about the key intermediates in the cycles of the molecular Ir catalysts. Herein, we probed the catalytic cycle of a homogeneous Ir catalyst (“blue dimer”) at a Au electrode/aqueous electrolyte interface by combining surface-enhanced infrared absorption spectroscopy (SEIRAS) with phase-sensitive detection (PSD). Cyclic voltammograms (CVs) from 1.4 to 1.7 VRHE (RHE = reversible hydrogen electrode) give rise to a band at ~818 cm –1 , whereas CVs from 1.4 to ≥1.85 VRHE generate an additional band at ~1146 cm –1 . Isotope labeling experiments indicate that the bands at ~818 and ~1146 cm –1 are attributable to oxo (Ir V =O) and superoxo (Ir IV –OO • ) moieties, respectively. Furthermore, this study establishes PSD-SEIRAS as a sensitive tool for probing water oxidation cycles at electrode/electrolyte interfaces and demonstrates that the relative abundance of two key intermediates can be tuned by the thermodynamic driving force of the reaction.

25 ENERGY STORAGE↗
DOE OSTI2024

Impact of ionization and transport on pedestal density structure in DIII-D and Alcator C-Mod

Abstract This paper investigates the role of ionization on the pedestal structure using both measurements and modeling for H-mode plasmas on DIII-D and Alcator C-Mod to enhance our ability to predict pedestal behavior in future pilot plants. The impact of the neutral penetration depth on the pedestal density is investigated using dimensionally matching hydrogen and deuterium DIII-D H-mode discharges at low and high electron density. The DIII-D Lyman- α diagnostic measurements show that hydrogen neutrals penetrate deeper inside the plasma on both the high field and low field side, while the pedestal electron density structure is similar for both isotopes. However, as the opaqueness increases we observe that the pedestal density gradient becomes stiff, similar to prior observations on DIII-D and C-Mod (Mordijck 2020 Nuclear Fusion 60 082006). In addition, these results also confirm prior measured and modeled poloidal asymmetries in neutral densities, indicating that to make transport predictions, 2D neutral modeling is necessary. The first direct validation of SOLPS-ITER for the measured brightness, emissivity and neutral densities for three different confinement regimes on C-Mod is introduced. The SOLPS-ITER model shows good agreement, within the constrains of the model for all regimes. In addition, a comparison of SOLPS-ITER modeling for DIII-D and C-Mod shows that as opaqueness increases, the role of divertor fueling and thus poloidal asymmetries in the neutral density profiles decreases. Based on these experimental and modeling results we estimate the size of a potential particle pinch using typical values for the diffusion coefficient for both DIII-D and C-Mod H-mode discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Hydrogen density mapping in biomolecular crystals through dynamic nuclear polarization

Many fundamental biological processes, including those in photosynthetic reaction centers and enzyme active sites, involve charge and energy transfer, bond cleavage, protonation and hydrogen bonding. Because H atoms play such central roles in these reactions, accurately determining their positions is essential. Yet, conventional X-ray crystallography primarily resolves the heavy atoms in biological structures and provides limited insight into hydrogen, even at atomic resolution. Neutron macromolecular crystallography (NMC) overcomes this limitation by offering exceptional sensitivity to hydrogen and deuterium. Here, we present a theoretical framework for the development of dynamic nuclear polarization NMC (DNP-NMC) techniques, which exploit the alignment of neutron and proton nuclear spins to enhance and tune the hydrogen signal contribution. The DNP-NMC approach advances the resolution of H atoms within biomolecular crystals, whether bound to protein residues or present in solvent. The method establishes key relationships for the coherent structure factor of polarized neutron scattering from hydrogenous matter. It theoretically achieves full accuracy in phase reconstruction and offers a path to improve neutron structure determination, achieving accuracies exceeding ≳80% by incorporating titration states. Using a variant of the hybrid input/output phase-retrieval algorithm, it allows recovery of the hydrogen density with ≳90% phase accuracy. In conclusion, we further discuss sources of experimental uncertainty for the upcoming DNP-enabled, quasi-Laue IMAGINE-X experiment at Oak Ridge National Laboratory's High Flux Isotope Reactor.

dynamic nuclear polarization↗
DOE OSTI2020

CO 2 Hydrogenation and Formic Acid Dehydrogenation Using Ir Catalysts with Amide-Based Ligands

In this work, a series of Ir catalysts bearing amide-based ligands generated by a deprotonated amide moiety was prepared with the hypotheses that the strong electron-donating ability of the coordinated anionic nitrogen atom and the proton-responsive OH group near the metal center will improve the catalytic activity for CO 2 hydrogenation and formic acid (FA) dehydrogenation. The effects of the modifications of the ligand architecture on the catalytic activity were investigated for CO 2 hydrogenation at ambient conditions (25 °C with 0.1 MPa H 2 /CO 2 (v/v = 1/1)) and under slightly harsher conditions (50 °C with 1.0 MPa H 2 /CO 2 ) in basic aqueous solutions together with deuterium kinetic isotope effects (KIEs) with selected catalysts. Cp*Ir( L12 )(H 2 O)HSO 4 ( L12 = 6-hydroxy- N -phenylpicolinamidate) that has an anionic coordinating N atom and an OH group in the second coordination sphere, exhibits a turnover frequency (TOF) of 198 h –1 based on the initial 1 h of reaction. This TOF which, to the best of our knowledge, is the highest value ever reported under ambient conditions in basic aqueous solutions. However, Cp*Ir( L10 )(H 2 O)HSO 4 ( L10 = (4-hydroxy- N -methylpicolinamidate) performs better in long-term CO 2 hydrogenation (up to a TON of 14 700 with [Ir] = 10 μM after 348 h and the final formate concentration of 0.643 M with [Ir] = 250 μM) at ambient conditions. Further, the catalytic activity for FA dehydrogenation was examined under three different conditions (pH 1.6, 2.3, and 3.5). The Cp*Ir( L12 )(H 2 O)HSO 4 complex in any of these conditions is less active compared to the picolinamidate catalysts without ortho -OH, owing to its instability. The complex without OH group, Cp*Ir( L8 )(H 2 O)HSO 4 ( L8 = N -phenyl-picolinamidate), exhibits a high TOF (up to 118 000 h -1 ) at 60 °C. Theoretical calculations were performed to examine the catalytic mechanism, and a step-by-step mechanism has been proposed for both CO 2 hydrogenation and FA dehydrogenation reactions. Density functional theory calculations of [Cp*Ir( L3 )(H 2 O)]HSO 4 ( L3 = picolinamidate) and the X-ray structure of the [Cp*Ir( L7 )(H)]·H 2 O ( L7 = N -methylpicolinamidate) complex imply a pH-dependent conformational change from N , N coordination to N , O coordination upon lowering the pH of the aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Isotope dependence of transport in ST40 hot ion mode plasmas

The ST40 compact, high-field spherical tokamak, operating at 2.1 T and with 1.8 MW of neutral beam heating, achieved central carbon impurity ion temperatures in excess of 10 keV, surpassing their business milestone of 100 M °C (8.6 keV). The high temperature discharges were in the hot ion mode, with $T_i \gg T_e$, and they were achieved in both hydrogen and deuterium plasmas with deuterium neutral beam injection. In order to achieve the high temperature scenarios, careful wall conditioning and scenario optimization was carried out in $H^0 \rightarrow H^+$, $D^0 \rightarrow H^+$, and finally in $D^0 \rightarrow D^+$ plasmas. The TRANSP transport code was employed to study the dependence of confinement and transport on isotopic mass, and the conditions that led to the high measured central ion temperatures in the $D^0 \rightarrow H^+$ and $D^0 \rightarrow D^+$ plasmas. The kinetic profiles input into TRANSP were inferred from line-of-sight and limited radial measurements as well as consistency with a number of other experimental constraints. The TRANSP results first showed that the main species central ion temperature was only 0.5–1 keV lower than the measured carbon impurity temperature, and thus in the high performance plasmas also surpassed the 100 M °C level. TRANSP also showed that while the electron thermal conduction loss was dominant, reductions in central ion transport, and an effective decoupling of the ions from the electrons, led to an increase in central ion temperatures with increasing plasma mass. In fact, the associated confinement times exhibited a strong dependence on the isotopic mass of the thermal plasma. These preliminary results are foundations for dedicated experiments with full kinetic profile measurements on ST40 in the next run campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Flow Injection Electrochemical Quartz Crystal Microbalance with ICP-OES Detection: Electroprecipitation and Stripping of Lanthanum and Neodymium in a Flow Cell

We used an improved version of our hyphenated analysis technique, flow injection electrochemical quartz crystal microbalance (EQCM) with inductively coupled optical emission spectroscopy, to investigate the electroprecipitation of lanthanum and neodymium from flowing solutions. The improved version has two independent flow injection circuits, allowing different conditions for electrochemical precipitation (pH=4.3 or 2.6) and quick stripping (2% HNO3) with EQCM mass detection and ICP-OES elemental analysis. Lanthanum or neodymium ions in a 500 uL sample were injected into a carrier stream and deposited onto an EQCM housed in a micro flow cell, owing to a localized high-pH layer. The deposits are subsequently stripped from the electrode using HNO3 and analyzed downstream using an ICP-OES. We found that using acidic solutions without supporting electrolyte leads to an increase of the amount of lanthanum detected by 4-fold. The enhanced deposition can be attributed to enhanced mass transfer by migration. Furthermore, we showed that by applying chronopotentiometry, we can detect a change in the hydrogen evolution reaction mechanism that enables the precipitation of lanthanides on the surface of the electrode. Understanding and enhancing the deposition of lanthanides is relevant for elemental or isotopic detection in nuclear forensics.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Quantitative near-field water–air spray measurements at elevated pressures by neutron radiography imaging

Extensive experimental research on high-pressure spray has been conducted for decades to deepen our understanding and optimize its use in transportation, aviation, and propulsion applications; however, the near-field and in-nozzle flow characteristics are not fully understood. Dense near-field spray is among the most challenging diagnostic tasks since light is severely scattered and diffused by the liquid droplets and columns. In this work, the near-field spray and in-nozzle flow characteristics of an aeration nozzle at elevated pressures were characterized by neutron radiography imaging at the Oak Ridge National Laboratory High Flux Isotope Reactor. Neutron imaging benefits via strong penetration depths for some metals (i.e., aluminum, lead, and steel) and is sufficiently sensitive to detection of light elements, especially for hydrogen-based molecules, due to the large incoherent scattering cross section of neutrons. Both two-dimensional snapshots of the near-field spray and a three-dimensional tomographic scan of the nozzle geometry and in-nozzle water were obtained. This work provides new quantitative characterization of practical metal nozzle geometry for accurate boundary conditions, internal flow patterns inside the nozzle, and high-pressure spray flows. In conclusion, the findings may be used to improve performance and operating conditions of transportation vehicles and propulsion systems.

42 ENGINEERING↗
DOE OSTI2021

Superconductivity up to 243 K in the yttrium-hydrogen system under high pressure

The discovery of superconducting H 3 S with a critical temperature T c ~200 K opened a door to room temperature superconductivity and stimulated further extensive studies of hydrogen-rich compounds stabilized by high pressure. Here, we report a comprehensive study of the yttrium-hydrogen system with the highest predicted T c s among binary compounds and discuss the contradictions between different theoretical calculations and experimental data. We synthesized yttrium hydrides with the compositions of YH 3 , YH 4 , YH 6 and YH 9 in a diamond anvil cell and studied their crystal structures, electrical and magnetic transport properties, and isotopic effects. We found superconductivity in the Im-3m YH 6 and P6 3 /mmc YH 9 phases with maximal T c s of ~220 K at 183 GPa and ~243 K at 201 GPa, respectively. Fm-3m YH 10 with the highest predicted T c > 300 K was not observed in our experiments, and instead, YH 9 was found to be the hydrogen-richest yttrium hydride in the studied pressure and temperature range up to record 410 GPa and 2250 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Removal of Tc-99, Zr-95, and Nb-95, From Solutions Obtained After Dissolution of Irradiated Mo Targets

Decontamination of 99 Tc, Nb, and Zr impurities in dissolved irradiated Mo disks can be accomplished using Fe(II) precipitation. Here, we report bench-scale experiments and large-scale demonstrations on removal of 99 Tc (0.1 mM), 95 Nb, and 95 Zr from dissolved Mo disk simulant solutions. Tc removal is accomplished through the reduction and simultaneous immobilization of Tc(VII) by Fe(II), producing an insoluble, Tcincorporated Fe(II)-Fe(III) solid that is removed by filtration. Large-scale testing showed that Tc (97.6% ± 1.7%) is removed without affecting 99 Mo yields. Other important side reaction product impurities in irradiated Mo targets, namely various isotopes of Nb and Zr, are also removed (>99%) in this process. The effects of metal (Fe, Tc, Mo) concentrations, Fe(II)/Fe(III) ratio, pH, temperature, Fe addition method, and hydrogen peroxide addition were tested. The minimum amount of Fe(II) needed to remove up to 99% Tc is 10 mM and the optimal pH value for simultaneous removal of Tc, Nb, and Zr impurities is pH 13.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Hyperspectral Light Sheet Raman Imaging of Leaf Metabolism (Final Report)

This final technical report details the accomplishment and findings of a project that developed technology related to imaging metabolic processes in plants. The report gives technical details of the design, construction and characterization of a Raman microscope system capable of identifying chemical species using the wavelength shifts of scattered excitation light. Some of the unique aspects of the design include: use of a Bessel beam excitation source, which allow long excitation lines that are resistant to scattering in complex media such as plants; excitation at 785 nm to avoid fluorescence emission that can occur in photosynthetic organisms; and a flat optical design that makes construction and alignment significantly simpler. This project also used stable isotope labeling to look at photorespiratory flux in the leaves of three different types of plants that have different photosynthesis pathways. Gas chromatography–mass spectrometry was used to look at which metabolites and amino acids had altered oxygen, carbon and hydrogen uptake under various conditions of environmental oxygen. This generated a rich data set that is being further analyzed to understand metabolic pathways in plants. This project also used the natural fluorescence in sorghum and rice to conduct an extensive experiment across different developmental stages. Spectral differences were identified at most of the developmental stages and these can be attributed to differential pigment and pigment-protein complexes present in different relative abundances as the plant develops.

09 BIOMASS FUELS↗
DOE OSTI2022

Irradiated stainless steel 347 and irradiated, welded, and hydrogen charged Zircaloy-4 property data for the target solution vessel and support lines of SHINE

In support of the reactor-vessel development effort of SHINE medical technologies, irradiation of its structural materials and post-irradiation testing have been performed in the High Flux Isotope Reactor at Oak Ridge National Laboratory. This irradiation was performed on welded and unwelded AISI 347 steel and Zircaloy-4 samples at low temperature (~60°C) in contact with the reactor coolant. Hardness, Charpy, and tensile data have been taken from all cases of unirradiated specimens, while post-irradiation tensile and hardness data have been taken from AISI 347 base metal and Zircaloy-4 base metal and weld specimens so far. Additionally, 3-point bend data have been taken from explosion-welded specimens. The expected changes to hardness, yield strength, ultimate tensile strength, uniform elongation, and total elongation as a result of the low temperature and low dose neutron irradiation are reported here.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Upcycling of polyethylene to gasoline through a self-supplied hydrogen strategy in a layered self-pillared zeolite

Conversion of plastic wastes to valuable carbon resources without using noble metal catalysts or external hydrogen remains a challenging task. Here we report a layered self-pillared zeolite that enables the conversion of polyethylene to gasoline with a remarkable selectivity of 99% and yields of >80% in 4 h at 240 °C. The liquid product is primarily composed of branched alkanes (selectivity of 72%), affording a high research octane number of 88.0 that is comparable to commercial gasoline (86.6). In situ inelastic neutron scattering, small-angle neutron scattering, solid-state nuclear magnetic resonance, X-ray absorption spectroscopy and isotope-labelling experiments reveal that the activation of polyethylene is promoted by the open framework tri-coordinated Al sites of the zeolite, followed by β-scission and isomerization on Brönsted acids sites, accompanied by hydride transfer over open framework tri-coordinated Al sites through a self-supplied hydrogen pathway to yield selectivity to branched alkanes. This study shows the potential of layered zeolite materials in enabling the upcycling of plastic wastes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗